LTC3370MPUH#TRPBF - 4-Ch 8A Configurable Buck | Analog Devices
Référence : LTC3370MPUH#TRPBF ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $5.23 | $5,23 |
| 10 | $4.85 | $48,50 |
| 100 | $4.2 | $420,00 |
| 500 | $3.8 | $1 900,00 |
| 1 000 | $3.5 | $3 500,00 |
LTC3370MPUH#TRPBF Présentation
A multioutput buck converter is a type of DC-DC switching regulator that integrates multiple step-down channels in a single package, allowing designers to generate several regulated voltage rails from a common input supply. This category sits within the broader hierarchy of power management ICs, which include linear regulators, charge pumps, and other switching converters. The LTC3370's configurable architecture enables it to replace multiple discrete regulators, reducing board space and component count.
Key features include a wide input voltage range of 2.25V to 5.5V, eight 1A power stages that can be combined for higher current, and a programmable switching frequency set by an external resistor. The device also offers independent enable pins for each channel, soft-start, and overcurrent protection. Its 32-lead WFQFN package with exposed pad ensures excellent thermal performance, and the MP suffix indicates a -40°C to 125°C operating junction temperature range, suitable for industrial and automotive environments.
The LTC3370 uses a current-mode, constant-frequency architecture with internal synchronous switches, achieving high efficiency across a wide load range. The configurable power stage assignment allows designers to optimize the number of channels and current capability for their specific application, reducing power loss and improving transient response. The device also includes a low quiescent current mode for light-load efficiency.
Typical applications include point-of-load regulation in FPGA, DSP, and ASIC power supplies, as well as battery-powered portable devices, industrial instrumentation, and automotive infotainment systems. The flexible configuration and high integration make it an excellent choice for multi-rail systems where PCB space is at a premium.
When designing with the LTC3370, ensure proper decoupling on each input supply and place the external frequency-setting resistor close to the RT pin. The exposed pad should be soldered to a large copper area for optimal heat dissipation, especially when operating at high output currents.
Alternatives de remplacement direct pour LTC3370MPUH#TRPBF — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec LTC3370MPUH#TRPBF (même facteur de forme et même empreinte) — différant par Package, Maximum Output Current, Operating Temperature Range, Output Voltage Range, Switching Frequency.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
LTC3370EUH#TRPBF
✅ Remplacement direct✓ En stock
$3.92 / unité
Voir la fiche technique →LTC3370IUH#TRPBF
✅ Remplacement direct✓ En stock
$3.94 / unité
Voir la fiche technique →LTC3370EUH#PBF
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$7.15 / unité
Voir la fiche technique →LTC3370IUH#PBF
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$5.5 / unité
Voir la fiche technique →LTC3370MPUH#PBF
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$5.5 / unité
Voir la fiche technique →LTC3370MPUH#TRPBF Valeurs maximales et caractéristiques électriques
| Type de sortie | Adjustable |
| Nombre de sorties | 4 |
| Plage de tension de sortie | 0.8V to 5V (per channel) |
| Courant de sortie maximal | 4A per channel (configurable) |
| Plage de tension d'entrée | 2.25V to 5.5V |
| Fréquence de commutation | Programmable via external resistor |
| Number of Power Stages | 8 x 1A |
| Configurations | 8 unique output configurations |
| Température de jonction en fonctionnement | -40°C to 125°C |
| Boîtier | 32-WFQFN Exposed Pad (UH) |
| Type de montage | Surface Mount |
| Redressement synchrone | Yes |
| Statut RoHS | Compliant |
Configuration des broches de LTC3370MPUH#TRPBF
| Broche 1 | SW1 — Switch node for channel 1 |
| Broche 2 | PVIN1 — Power input for channel 1 |
| Broche 3 | VIN1 — Analog input for channel 1 |
| Broche 4 | RUN1 — Enable for channel 1 |
| Broche 5 | C1 — Configuration pin 1 |
| Broche 6 | C2 — Configuration pin 2 |
| Broche 7 | C3 — Configuration pin 3 |
| Broche 8 | RT — Switching frequency set resistor |
| Broche 9 | GND — Ground |
| Broche 10 | VOUT1 — Output voltage sense for channel 1 |
| Broche 11 | FB1 — Feedback for channel 1 |
| Broche 12 | VOUT2 — Output voltage sense for channel 2 |
| Broche 13 | FB2 — Feedback for channel 2 |
| Broche 14 | VOUT3 — Output voltage sense for channel 3 |
| Broche 15 | FB3 — Feedback for channel 3 |
| Broche 16 | VOUT4 — Output voltage sense for channel 4 |
| Broche 17 | FB4 — Feedback for channel 4 |
| Broche 18 | RUN2 — Enable for channel 2 |
| Broche 19 | RUN3 — Enable for channel 3 |
| Broche 20 | RUN4 — Enable for channel 4 |
| Broche 21 | VIN2 — Analog input for channel 2 |
| Broche 22 | PVIN2 — Power input for channel 2 |
| Broche 23 | SW2 — Switch node for channel 2 |
| Broche 24 | SW3 — Switch node for channel 3 |
| Broche 25 | PVIN3 — Power input for channel 3 |
| Broche 26 | VIN3 — Analog input for channel 3 |
| Broche 27 | SW4 — Switch node for channel 4 |
| Broche 28 | PVIN4 — Power input for channel 4 |
| Broche 29 | VIN4 — Analog input for channel 4 |
| Broche 30 | MODE — Mode selection (light load operation) |
| Broche 31 | PLLIN — External clock synchronization input |
| Broche 32 | EXTVCC — External bias supply input |
| Broche 33 | GND — Exposed pad, ground |
Applications typiques
LTC3370MPUH#TRPBF convient pour 6 applications: FPGA and DSP Power Supplies, Battery-Powered Portable Devices, Industrial Instrumentation, Automotive Infotainment, Networking Equipment, Medical Devices.
FPGA and DSP Power Supplies
The LTC3370MPUH#TRPBF provides multiple regulated rails for FPGAs and DSPs, which often require 1.0V, 1.8V, 2.5V, and 3.3V supplies. Its four configurable buck converters can be set to deliver up to 4A per channel, meeting the core and I/O voltage requirements. The wide input range of 2.25V to 5.5V allows direct operation from a 5V or 3.3V bus, and the high efficiency reduces thermal stress in dense designs. The pin-programmable configurations simplify board layout by eliminating external components for voltage selection.
Recommandé
Battery-Powered Portable Devices
In portable devices, the LTC3370MPUH#TRPBF efficiently converts battery voltage (2.25V to 5.5V) to multiple system rails. Its low no-load supply current extends battery life in standby mode, while the configurable power stages allow optimization for different load profiles. The small 32-WFQFN package saves PCB space, and the synchronous rectification provides high efficiency across the load range. This makes it ideal for smartphones, tablets, and wearables where multiple voltages are needed from a single battery.
Recommandé
Industrial Instrumentation
Industrial systems often require multiple isolated or non-isolated rails for sensors, ADCs, and microcontrollers. The LTC3370MPUH#TRPBF's -40°C to 125°C temperature range ensures reliable operation in harsh environments. Its configurable outputs can be tailored to specific voltage and current needs, reducing component count and improving reliability. The external resistor-set switching frequency allows synchronization to avoid interference with sensitive analog circuits, making it suitable for precision measurement equipment.
Recommandé
Automotive Infotainment
Automotive infotainment systems need multiple power rails for processors, displays, and audio amplifiers. The LTC3370MPUH#TRPBF's wide input range handles 5V and 3.3V buses, and its extended temperature range meets automotive requirements. The configurable outputs can supply up to 4A per channel for high-current loads like display backlights. Its high efficiency reduces heat generation in the cabin, and the small package fits space-constrained head units. The device is not AEC-Q100 qualified, so additional qualification may be needed.
Recommandé
Networking Equipment
Networking devices such as routers and switches require multiple low-voltage rails for ASICs, PHYs, and memory. The LTC3370MPUH#TRPBF provides a compact, efficient solution with four configurable outputs. Its input range of 2.25V to 5.5V allows operation from a 5V supply, and the high output current capability supports power-hungry processors. The programmable switching frequency helps minimize EMI, which is critical in communication equipment. The device's small footprint and high integration reduce BOM cost and board space.
Recommandé
Medical Devices
Medical devices often require multiple regulated voltages for sensors, processors, and communication modules. The LTC3370MPUH#TRPBF's low noise and high efficiency make it suitable for battery-powered and line-powered equipment. Its configurable outputs can be tailored to specific requirements, and the wide temperature range ensures reliable operation. The small package is ideal for portable monitors and diagnostic tools. The device's synchronous rectification minimizes power loss, extending battery life in portable medical devices.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour LTC3370MPUH#TRPBF — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | LTC3370EUH#TRPBF | LTC3370IUH#TRPBF | LTC3370EUH#PBF |
|---|---|---|---|---|
| Package | 32-WFQFN Exposed Pad | 32-WFQFN Exposed Pad | 32-WFQFN Exposed Pad | 32-WFQFN Exposed Pad |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Temperature Range | -40°C to 125°C | 0°C to 85°C | -40°C to 125°C | 0°C to 85°C |
| Output Current per Channel | Up to 4A | Up to 4A | Up to 4A | Up to 4A |
| Input Voltage Range | 2.25V to 5.5V | 2.25V to 5.5V | 2.25V to 5.5V | 2.25V to 5.5V |
| Number of Outputs | 4 | 4 | 4 | 4 |
| Switching Frequency | Programmable | Programmable | Programmable | Programmable |
| Packaging | Tape & Reel | Tape & Reel | Tape & Reel | Tray |
Principaux différenciateurs
- Extended temperature range (-40°C to 125°C) (vs LTC3370EUH#TRPBF)
- Configurable power stages (8 x 1A) (vs LTC3370EUH#TRPBF)
- Pin-programmable configurations (vs LTC3370EUH#TRPBF)
Notes de conception
Place input and output capacitors close to the respective PVIN and SW pins to minimize parasitic inductance. Use low-ESR ceramic capacitors (e.g., 10uF) for each channel. The exposed pad (GND) must be soldered to a large copper area for thermal management and electrical grounding. Ensure adequate via stitching to the ground plane.
The LTC3370MPUH#TRPBF can dissipate significant power at high output currents. The 32-WFQFN package has an exposed pad that must be connected to a thermal relief pattern. For 4A per channel, calculate power dissipation as (VIN - VOUT) * IOUT * (1 - efficiency). Use a 2-layer or 4-layer PCB with thermal vias to keep junction temperature below 125°C.
Do not exceed the absolute maximum input voltage of 5.5V. Ensure the RT pin resistor is placed close to the pin and connected to ground. The C1-C3 pins must be tied to VIN or GND to select the desired configuration; floating these pins can cause undefined behavior. Also, verify that the total output current does not exceed 8A across all channels.
Informations de conformité
RoHS compliant per Analog Devices product page. Not AEC-Q100 qualified. Lead-free per datasheet.
