LTC3372MPUH#TR - 60V Low IQ Buck Controller + 4-Channel 8A Configurable Buck DC/DCs | Analog Devices
Référence : LTC3372MPUH#TR ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $12.5 | $12,50 |
| 10 | $11.25 | $112,50 |
| 100 | $10 | $1 000,00 |
| 500 | $9 | $4 500,00 |
| 1 000 | $8.1 | $8 100,00 |
LTC3372MPUH#TR Présentation
A multioutput power supply IC is a single integrated circuit that provides multiple regulated voltage rails from one or more input sources. It typically combines a controller for an external high-voltage stage with integrated low-voltage converters, enabling efficient power distribution in complex systems. In the hierarchy of power management, it sits above individual DC-DC converters, offering a complete power solution that reduces component count and board space.
Key features include a wide input voltage range of 4.5V to 60V for the HV controller, low quiescent current for battery-powered applications, and four configurable LV buck converters with up to 8A total output current. The device supports multiple output configurations, allowing designers to tailor the power architecture to specific needs. Its high efficiency and low IQ make it ideal for always-on systems.
Technically, the LTC3372 employs a current-mode control architecture for fast transient response and stable operation. The HV controller drives external N-channel MOSFETs, enabling high-power step-down conversion from elevated input voltages. The LV converters are fully integrated with internal power switches, simplifying design and reducing external component count. The device includes comprehensive protection features such as overcurrent and overtemperature shutdown.
Typical applications include industrial power supplies, automotive infotainment systems, telecom equipment, and distributed power architectures. Its ability to handle high input voltages and provide multiple regulated outputs makes it suitable for systems requiring multiple supply rails from a single source.
When designing with the LTC3372, careful attention must be paid to PCB layout for the high-current paths and the HV controller's gate drive signals. Proper decoupling and thermal management are essential to ensure reliable operation at maximum load.
Alternatives de remplacement direct pour LTC3372MPUH#TR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec LTC3372MPUH#TR (même facteur de forme et même empreinte) — différant par Synchronous Rectification, Control Architecture, Package, RoHS Status, Input Voltage Range (HV Controller).
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
LTC3372EUH#TR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LTC3372IUH#TR
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
LTC3372MPUH#PBF
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$7.9 / unité
Voir la fiche technique →LTC3372EUH#PBF
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$8.1 / unité
Voir la fiche technique →LTC3372IUH#PBF
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$8.15 / unité
Voir la fiche technique →LTC3372MPUH#TR Valeurs maximales et caractéristiques électriques
| Input Voltage Range (HV Controller) | 4.5 V to 60 V |
| Number of LV Buck Converters | 4 |
| Total Output Current (LV) | 8 A |
| Output Current per Channel | Configurable up to 8 A |
| Température de jonction en fonctionnement | -40°C to 125°C |
| Boîtier | 44-pin QFN |
| Type de montage | Surface Mount |
| Control Architecture | Current Mode |
| External FETs | All N-Channel |
| Protection Features | Overcurrent, Overtemperature |
| Statut RoHS | Compliant |
| REACH Status | Compliant |
Configuration des broches de LTC3372MPUH#TR
| Broche 1 | HVIN — High-voltage input for controller |
| Broche 2 | HVGATE — Gate drive for external N-channel FET |
| Broche 3 | HVFB — Feedback for HV controller |
| Broche 4 | LVIN1 — Input for LV buck converter 1 |
| Broche 5 | LVSW1 — Switch node for LV buck 1 |
| Broche 6 | LVFB1 — Feedback for LV buck 1 |
| Broche 7 | LVIN2 — Input for LV buck converter 2 |
| Broche 8 | LVSW2 — Switch node for LV buck 2 |
| Broche 9 | LVFB2 — Feedback for LV buck 2 |
| Broche 10 | LVIN3 — Input for LV buck converter 3 |
| Broche 11 | LVSW3 — Switch node for LV buck 3 |
| Broche 12 | LVFB3 — Feedback for LV buck 3 |
| Broche 13 | LVIN4 — Input for LV buck converter 4 |
| Broche 14 | LVSW4 — Switch node for LV buck 4 |
| Broche 15 | LVFB4 — Feedback for LV buck 4 |
| Broche 16 | GND — Ground |
| Broche 17 | EN — Enable pin |
| Broche 18 | MODE — Mode selection |
| Broche 19 | SYNC — External clock sync |
| Broche 20 | VCC — Internal supply |
Applications typiques
LTC3372MPUH#TR convient pour 6 applications: Industrial Power Supplies, Automotive Infotainment, Telecom Equipment, Distributed Power Architectures, Battery-Powered Systems, FPGA Power Solutions.
Industrial Power Supplies
The LTC3372MPUH#TR's 60V input capability and multiple outputs make it ideal for industrial power supplies that need to generate multiple rails from a high-voltage bus. Its high efficiency reduces heat dissipation, and the configurable outputs allow flexible voltage/current combinations. The wide temperature range ensures reliable operation in factory environments.
Recommandé
Automotive Infotainment
In automotive infotainment systems, the LTC3372MPUH#TR provides multiple regulated rails for processors, displays, and audio from a 12V battery. Its wide input range handles load dumps and cranking conditions, while the low quiescent current supports always-on features. The -40°C to 125°C temperature range meets automotive requirements.
Recommandé
Telecom Equipment
Telecom equipment often operates from 48V backplanes, and the LTC3372MPUH#TR's 60V input directly handles this. It generates multiple low-voltage rails for FPGAs, ASICs, and line cards. The high efficiency reduces cooling requirements, and the configurable outputs adapt to different board designs.
Recommandé
Distributed Power Architectures
The LTC3372MPUH#TR is well-suited for distributed power architectures where a high-voltage bus is stepped down to multiple point-of-load rails. Its HV controller drives external FETs for high-power conversion, while the integrated LV converters handle lower-power rails. This reduces component count and improves efficiency.
Recommandé
Battery-Powered Systems
With its low quiescent current, the LTC3372MPUH#TR is suitable for battery-powered systems that require multiple rails, such as portable instruments. The wide input range accommodates battery voltage variations, and the high efficiency extends battery life. The configurable outputs allow optimization for different load profiles.
Recommandé
FPGA Power Solutions
FPGAs require multiple voltage rails (core, I/O, auxiliary) with precise sequencing. The LTC3372MPUH#TR provides up to four configurable outputs that can be sequenced to meet FPGA power-up requirements. Its high efficiency and small footprint make it ideal for dense FPGA boards.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour LTC3372MPUH#TR — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | LTC3372EUH#TR | LTC3372IUH#TR | LTC3372MPUH#PBF |
|---|---|---|---|---|
| Package | 44-pin QFN | 44-pin QFN | 44-pin QFN | 44-pin QFN |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Temperature Grade | -40°C to 125°C | 0°C to 85°C | -40°C to 85°C | -40°C to 125°C |
| Lead-Free | Yes (RoHS) | Yes | Yes | Yes |
| Input Voltage Range | 4.5V to 60V | 4.5V to 60V | 4.5V to 60V | 4.5V to 60V |
| Number of Outputs | 1 HV + 4 LV | 1 HV + 4 LV | 1 HV + 4 LV | 1 HV + 4 LV |
| Total Output Current | 8A (LV) | 8A | 8A | 8A |
| Quiescent Current | Low IQ | Low IQ | Low IQ | Low IQ |
Principaux différenciateurs
- Extended temperature range (-40°C to 125°C) (vs LTC3372EUH#TR)
- High-voltage controller with 60V input (vs LTC3372EUH#TR)
- Low quiescent current for battery operation (vs LTC3372EUH#TR)
Notes de conception
For the high-current LV buck converters, use wide copper traces and multiple vias for the switch nodes and ground. Place input and output capacitors close to the IC pins to minimize parasitic inductance. The HV controller's gate drive traces should be short and direct to the external FETs to reduce ringing.
The LTC3372MPUH#TR can dissipate significant power when delivering 8A from the LV converters. Ensure adequate thermal vias under the exposed pad and a sufficient copper area for heat spreading. For high ambient temperatures, consider forced airflow or a heatsink.
Do not exceed the absolute maximum input voltage of 60V on the HV pin. Ensure the external FETs are rated for the maximum input voltage and have appropriate gate drive. The feedback resistors for each output must be placed close to the IC to avoid noise pickup.
Informations de conformité
RoHS and REACH compliant per Analog Devices product page. Not AEC-Q100 qualified; for automotive, verify with manufacturer.
