M1AFS600-FGG484K - Fusion FPGA 600K Gates ARM Cortex-M1 | Microchip
Référence : M1AFS600-FGG484K ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $768.92 | $768,92 |
| 10 | $731.47 | $7 314,70 |
| 100 | $692.03 | $69 203,00 |
| 500 | $653.58 | $326 790,00 |
| 1 000 | $615.14 | $615 140,00 |
M1AFS600-FGG484K Présentation
An FPGA (Field Programmable Gate Array) is a semiconductor device containing programmable logic blocks and interconnects that can be configured by the designer after manufacturing. Within the programmable logic hierarchy, the FPGA sits above CPLDs and below full ASICs, offering high gate counts, embedded memory, and hardware reconfigurability for prototyping and mid-volume production. The Fusion family extends this concept by integrating a hard ARM Cortex-M1 processor core and configurable analog blocks into a single system-on-chip.
Key features of the M1AFS600-FGG484K include 600K system gates of programmable fabric, an embedded ARM Cortex-M1 soft/hard processor subsystem for embedded control, 110592 bits of on-chip flash configuration memory, and 172 flexible I/O pins supporting multiple single-ended and differential standards. The 484-BGA package provides high interconnect density for complex designs.
Architecturally, the Fusion family combines flash-based configuration with a deterministic fabric, enabling instant-on operation and high security against bitstream cloning. The integrated analog peripherals and processor subsystem reduce external BOM count compared to discrete FPGA-plus-microcontroller solutions.
Typical applications include industrial automation controllers, aerospace and defense systems (supported by the -55C to +100C industrial/military temperature range), medical instrumentation, and communications equipment requiring reconfigurable logic with an embedded processor.
A key design consideration is power delivery: flash-based FPGAs require stable core and I/O rails with proper decoupling, and the 484-ball BGA demands careful PCB layout with controlled-impedance escape routing.
This page synthesizes distributor pricing, drop-in alternatives from the same Fusion family, and practical design notes not found in the manufacturer datasheet.
Alternatives de remplacement direct pour M1AFS600-FGG484K — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec M1AFS600-FGG484K (même facteur de forme et même empreinte) — différant par Family, Package, System Gates, Configuration Memory, RoHS Status.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
M1AFS600-1FGG484K
✅ Remplacement direct✓ En stock
$155 / unité
Voir la fiche technique →M1AFS600-FGG484I
✅ Remplacement direct✓ En stock
$128.4 / unité
Voir la fiche technique →M1AFS600-1FGG484I
✅ Remplacement direct✓ En stock
$430 / unité
Voir la fiche technique →M1AFS600-1FG484K
✅ Remplacement direct✓ En stock
$273.52 / unité
Voir la fiche technique →M1AFS600-FG484K
✅ Remplacement direct✓ En stock
$108.5 / unité
Voir la fiche technique →M1AFS600-2FGG484
✅ Remplacement direct✓ En stock
$175 / unité
Voir la fiche technique →M1AFS600-FG484
✅ Remplacement direct✓ En stock
$185 / unité
Voir la fiche technique →M1AFS600-FGG484K Valeurs maximales et caractéristiques électriques
| Family | Fusion FPGA |
| System Gates | 600K |
| Number of I/O | 172 |
| Embedded Flash Memory | 110592 bit |
| Processor Core | ARM Cortex-M1 |
| Boîtier | 484-BGA (FBGA) |
| Plage de température de fonctionnement | -55C to +100C |
| Type de montage | Surface Mount |
| Configuration Memory Type | Flash (on-chip) |
| Lead Free Status | Lead Free |
| Statut RoHS | RoHS Compliant |
| Catégorie | Integrated Circuits (ICs) - FPGA |
| Manufacturer Prefix Origin | Microsemi Corporation (now Microchip Technology) |
Guide de configuration des broches du M1AFS600-FGG484K 484-bga (fbga)
Configuration des broches du M1AFS600-FGG484K (boîtier 484-bga (fbga)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour M1AFS600-FGG484K.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
M1AFS600-FGG484K convient pour 6 applications: Aerospace and Defense Systems, Industrial Automation Controllers, Medical Instrumentation, Communications and Networking Equipment, Test and Measurement Instruments, Security and Surveillance Systems.
Aerospace and Defense Systems
The M1AFS600-FGG484K fits aerospace and defense payloads because its -55C to +100C operating range and flash-based instant-on configuration meet the environmental and boot-time demands of avionics, satellite sub-systems, and ground defense electronics. The Fusion family was engineered by Microsemi specifically for these markets, and the on-chip flash resists bitstream cloning better than SRAM-configured FPGAs. In a typical sensor-interface payload, the 600K gate fabric implements protocol bridges and DSP glue logic while the ARM Cortex-M1 runs housekeeping firmware. The trade-off: the standard Fusion family is not radiation-hardened, so total-ionizing-dose requirements must be validated separately or addressed with system-level mitigation.
Recommandé
Industrial Automation Controllers
In industrial automation, the M1AFS600-FGG484K serves as the logic and control hub of PLC modules, motor-control cards, and fieldbus gateways. The 600K system gates implement deterministic state machines, encoder interfaces, and multi-protocol bridges (e.g., fieldbus MACs) with cycle-accurate timing, while the embedded ARM Cortex-M1 executes communication stacks and diagnostics without a second MCU. The 172 user I/Os directly connect to isolated transceivers and ADCs across multiple voltage banks. Because configuration lives in on-chip flash, the controller is running within milliseconds of power-up - a hard requirement on factory lines that must not wait for bitstream download. Wide-temperature operation also suits unventilated control cabinets.
Recommandé
Medical Instrumentation
Medical diagnostic equipment - patient monitors, imaging front-ends, and laboratory analyzers - benefits from the M1AFS600-FGG484K's combination of reconfigurable fabric and embedded ARM Cortex-M1 processor. The 600K gates implement acquisition sequencing, filter pipelines, and interface logic, while the processor manages UI communication and self-test routines, reducing component count on safety-critical boards. The flash-based fabric starts instantly and its configuration is resistant to corruption, supporting reliability targets in devices subject to regulatory review. Designers should budget for the 484-BGA layout complexity and ensure I/O bank voltages match the analog front-end levels; the 172 I/Os provide ample margin for multi-channel sensor arrays.
Recommandé
Communications and Networking Equipment
Line cards, backplane controllers, and protocol converters in communications equipment use the M1AFS600-FGG484K to bridge legacy and modern interfaces. The 600K system gates absorb framing, scrambling, and retry logic for serial protocols, and the 172 I/Os span multiple banks for mixed-voltage connectivity between PHYs, MACs, and backplane connectors. The ARM Cortex-M1 handles link management and telemetry reporting. Flash configuration eliminates the external configuration PROM and its boot delay, simplifying hot-swap and watchdog reset designs. For high-throughput SERDES-heavy designs, note that this generation of Fusion fabric targets parallel and mid-rate interfaces; verify interface standards against the datasheet I/O electrical specifications early in the design.
Recommandé
Test and Measurement Instruments
Bench instruments, automated test equipment, and data-acquisition systems rely on the M1AFS600-FGG484K for timing generation, capture logic, and instrument bus interfacing. The deterministic flash-based fabric delivers predictable trigger latency - critical for oscilloscope and logic-analyzer front-ends - while the ARM Cortex-M1 runs command parsing and calibration routines. The -55C to +100C range covers rack environments with elevated ambient temperatures, and the 172 user I/Os connect to high-pin-count ADC/DAC arrays with bank-level voltage flexibility. Designers should implement robust JTAG and in-system programming access for field firmware updates, and follow the manufacturer's power-rail sequencing guidance for the multi-rail FPGA supply.
Recommandé
Security and Surveillance Systems
High-end video surveillance and secure access equipment uses the M1AFS600-FGG484K to implement video-interface bridging, encryption offload in fabric, and system supervision. The 600K gates handle camera-interface protocol conversion and streaming datapaths, while the ARM Cortex-M1 manages authentication and network reporting. On-chip flash configuration strengthens the supply chain of secure systems because the design image is stored internally and resistant to readout, unlike external-configuration SRAM FPGAs. The 172 I/Os accommodate multiple sensor and display interfaces. Power design is the main consideration: decouple all core and I/O rails per the datasheet and use a solid ground plane under the 484-ball package for signal integrity.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour M1AFS600-FGG484K — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | M1AFS600-1FGG484K | M1AFS600-FGG484I | M1AFS600-1FGG484I | M1AFS600-1FG484K |
|---|---|---|---|---|---|
| Package | 484-BGA (FBGA) | 484-FBGA - same | 484-FBGA - same | 484-FBGA - same | 484-FBGA - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 600K | 600K | 600K | 600K | 600K |
| User I/O | 172 | 172 | 172 | 172 | 172 |
| Embedded Flash | 110592 bit | 110592 bit | 110592 bit | 110592 bit | 110592 bit |
| Speed Grade | Standard | 1 (faster) | Standard | 1 (faster) | 1 (faster) |
| Temperature Range | -55C to +100C | -55C to +100C | -55C to +100C (I variant) | -55C to +100C (I variant) | -55C to +100C |
| Processor Core | ARM Cortex-M1 | ARM Cortex-M1 | ARM Cortex-M1 | ARM Cortex-M1 | ARM Cortex-M1 |
Principaux différenciateurs
- Balanced density for mid-complexity designs (vs M1AFS1500-FGG484K)
- Instant-on flash configuration (vs SRAM-based competitor FPGAs)
- Wide military-grade temperature range at standard cost (vs M1AFS600-2FGG484)
Notes de conception
Flash-based Fusion FPGAs require multiple supply rails (core, I/O banks, analog) with defined power-up sequencing per the manufacturer datasheet. Design each I/O bank's rail to match the interfacing device voltage before assigning pins in Libero SoC, since bank voltage is fixed by hardware once the board is built. Estimated: a 600K gate design at moderate utilization typically draws hundreds of milliwatts of core power - use the Microsemi power calculator (based on your post-place-and-route netlist) rather than worst-case gate-count estimates for regulator sizing.
The 484-ball FBGA demands controlled-impedance escape routing. Use via-in-pad or dog-bone fanout on a 0.8-1.0 mm ball pitch, and reserve at least two internal layers as unbroken ground planes under the package. Group configuration and JTAG balls away from switching signals, and place 100 nF ceramic decoupling capacitors on the underside of the board directly beneath the supply balls, plus bulk capacitance at each rail entry point to handle simultaneous-switching noise across the 172 I/Os.
Do not interchange speed grades without re-running timing closure: migrating a design from the standard grade to the slower M1AFS600-2FGG484 can break timing at the same clock frequency, while migrating to the faster M1AFS600-1FGG484K is safe. Also verify the suffix letter ('K' vs 'I') against your soldering profile and compliance requirements, since lead-finish variants differ. Finally, flash configuration means the part is live at power-up - ensure I/O states during brief-reset windows cannot damage connected circuitry.
Informations de conformité
RoHS Compliant and Lead Free per digchip datasheet summary of the M1AFS600-FGG484K. REACH and conflict-minerals status not stated in provided data.