M1AFS600-FG484K - 600K-Gate Fusion FPGA, 172 I/O | Microchip
Référence : M1AFS600-FG484K ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $155 | $155,00 |
| 10 | $142.6 | $1 426,00 |
| 100 | $131.75 | $13 175,00 |
| 500 | $119.4 | $59 700,00 |
| 1 000 | $108.5 | $108 500,00 |
M1AFS600-FG484K Présentation
An FPGA (field programmable gate array) is a type of programmable logic device whose interconnect and logic function are configured after manufacturing, sitting within the broader hierarchy of programmable ICs: FPGA -> programmable logic device -> digital IC -> semiconductor. The Fusion family distinguishes itself by combining flash-based programmable fabric (no external configuration PROM required) with analog mixed-signal peripherals, an ARM Cortex-M1 microcontroller subsystem, and industry-standard interfaces.
Key features of the M1AFS600-FG484K include 600K system gates of flash fabric, 172 user I/O pins, and instant-on power-up behavior inherent to flash FPGA technology. Because configuration data is stored on-chip in non-volatile flash, the device requires no external boot flash, reduces BOM cost, and improves board-level security against bitstream interception compared with SRAM FPGAs.
Architecturally, the Fusion fabric consists of VersaTiles - fine-grained flash switch-based logic tiles - supporting both combinational and sequential implementations, plus embedded flash blocks, SRAM, and analog blocks such as ADC, voltage/temperature monitors, and RTC in the broader family. The ARM Cortex-M1 core allows soft-logic and processor workloads to be partitioned in one device.
Typical applications include industrial automation control, portable instrumentation, medical equipment, battery-powered systems, and secure embedded controllers where instant-on, low-power flash FPGA operation and mixed-signal integration matter.
When designing with this device, verify the commercial temperature grade (K suffix) suits your environment; industrial-grade I-suffix siblings exist in the same footprint. Check I/O bank voltage assignments in Libero SoC before routing.
This page synthesizes distributor availability, same-package drop-in speed/temp-grade alternatives, and engineering design notes not found in the manufacturer datasheet.
Alternatives de remplacement direct pour M1AFS600-FG484K — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec M1AFS600-FG484K (même facteur de forme et même empreinte) — différant par Package, Family, System Gates, Configuration Memory, RoHS Status.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
M1AFS600-FG484
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$185 / unité
Voir la fiche technique →M1AFS600-FG484I
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →M1AFS600-FGG484I
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$128.4 / unité
Voir la fiche technique →M1AFS600-1FG484I
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$425 / unité
Voir la fiche technique →M1AFS600-1FGG484K
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$155 / unité
Voir la fiche technique →M1AFS600-2FG484
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$141.9 / unité
Voir la fiche technique →M1AFS600-2FG484I
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$97.6 / unité
Voir la fiche technique →M1AFS1500-FG484K
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$1327.1 / unité
Voir la fiche technique →M1AFS600-FG484K Valeurs maximales et caractéristiques électriques
| Family | Fusion (Mixed-Signal Flash FPGA) |
| System Gates | 600000 gates |
| User I/Os | 172 |
| Logic Elements / Registers | 110592 |
| Processor Core | ARM Cortex-M1 (hard core) |
| Technology | Flash-based (non-volatile configuration) |
| Boîtier | 484-BGA (484-FBGA) |
| Type de montage | Surface Mount |
| Supplier Device Package | 484-BGA |
| Programming Type | In-system programmable via on-chip Flash |
Guide de configuration des broches du M1AFS600-FG484K 484-bga
Configuration des broches du M1AFS600-FG484K (boîtier 484-bga). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour M1AFS600-FG484K.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
M1AFS600-FG484K convient pour 6 applications: Industrial Automation Control, Portable and Battery-Powered Instruments, Medical Equipment Control Boards, Secure Embedded Controllers, Mixed-Signal Data Acquisition Systems, Aerospace-Adjacent and Ruggedized Ground Systems.
Industrial Automation Control
The M1AFS600-FG484K fits industrial automation because its 600K-gate flash fabric absorbs glue logic, PWM engines, encoder interfaces, and safety state machines while the ARM Cortex-M1 hard core supervises the process. Flash configuration gives instant-on startup after power interruption - critical in factory equipment that must resume deterministically. The Fusion family's integrated voltage and temperature monitoring supports board-level health checks without extra supervisor ICs, cutting BOM cost. Place it as the central controller between field I/O and backplane interfaces; the 172 user I/Os span multiple banks for mixed-voltage connectivity. For harsh floor environments above commercial range, substitute the pin-compatible industrial M1AFS600-FG484I instead.
Recommandé
Portable and Battery-Powered Instruments
Flash-based FPGAs such as the M1AFS600-FG484K are well suited to portable instrumentation because the non-volatile fabric eliminates external configuration flash and supports low static-power operation typical of Microsemi flash devices. In handheld analyzers and field meters, the 600K-gate capacity implements display controllers, sensor aggregation, and DSP pre-processing, while the ARM Cortex-M1 runs the user interface firmware on the same die. Instant-on behavior means measurements begin immediately at power-up, an advantage over SRAM FPGAs that need millisecond-scale configuration. The 484-FBGA footprint offers high integration in a compact board area; the commercial-grade K variant suits controlled portable environments.
Recommandé
Medical Equipment Control Boards
The M1AFS600-FG484K serves medical diagnostics and monitoring equipment where deterministic, instant-on behavior and secure configuration matter. The flash fabric resists bitstream interception better than SRAM-programmed devices, supporting designs with data-integrity considerations, and the ARM Cortex-M1 core isolates patient-interface firmware from acquisition logic implemented in the 600K gates. On-chip mixed-signal monitoring assists power-rail supervision required in care-continuity equipment. Designs should use the industrial-grade M1AFS600-FG484I drop-in sibling when ambient specifications exceed the commercial range. With 172 user I/Os across multiple banks, the device interfaces sensor front ends, displays, and communication modules on one controller board.
Recommandé
Secure Embedded Controllers
Security-oriented embedded controllers benefit from the M1AFS600-FG484K's flash-based configuration, which stores the bitstream on-chip rather than in an external device vulnerable to readout. The Fusion fabric combined with the ARM Cortex-M1 lets designers partition cryptographic accelerators in logic and key management firmware on the processor, all within one 484-FBGA package. Instant-on configuration removes the window during which SRAM FPGAs are blank and unauthenticated. The 600K-gate density accommodates AES-class logic plus interface bridges, while 172 user I/Os connect tamper sensors and communication PHYs. This makes the part a fit for secure gateways, licensing dongles, and protected industrial nodes.
Recommandé
Mixed-Signal Data Acquisition Systems
Data acquisition systems leverage the Fusion family's distinguishing feature: analog mixed-signal peripherals integrated alongside the digital flash fabric, so voltage and temperature monitoring happens on the same die as the digital front-end logic. The M1AFS600-FG484K implements acquisition sequencing, trigger engines, and FIFO management in its 600K gates while the ARM Cortex-M1 runs calibration and communication stacks. The 484-FBGA package provides enough user I/Os - 172 - to fan in multiple sensor channels and fan out to host interfaces. For designs requiring wider environmental coverage, the pin-compatible industrial variant maintains footprint compatibility, protecting the PCB investment across product tiers.
Recommandé
Aerospace-Adjacent and Ruggedized Ground Systems
While radiation-rated RTAX parts serve flight hardware, the M1AFS600-FG484K fits ruggedized ground support equipment and test benches that validate space electronics. Flash configuration tolerates vibration and power cycling without reconfiguration hardware, and the 600K-gate fabric emulates bus protocols and generates stimulus patterns for RTAX-family device testing. The ARM Cortex-M1 core orchestrates test sequences while the fabric handles real-time timing. The 484-FBGA's 172 user I/Os support parallel test vectors to multiple devices under test. For extended temperature chambers, the industrial M1AFS600-2FG484I drop-in sibling preserves the same PCB footprint with a faster speed grade option.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour M1AFS600-FG484K — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | M1AFS600-FG484I | M1AFS600-FGG484I | M1AFS600-2FG484 | M1AFS1500-FG484K |
|---|---|---|---|---|---|
| Package | 484-FBGA | 484-FBGA - same | 484-FBGA - same | 484-FBGA - same | 484-FBGA - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 600000 | 600000 | 600000 | 600000 | 1500000 |
| Temperature Grade | Commercial (K) | Industrial (I) | Industrial (I) | Commercial | Commercial (K) |
| Processor Core | ARM Cortex-M1 | ARM Cortex-M1 | ARM Cortex-M1 | ARM Cortex-M1 | ARM Cortex-M1 |
| Configuration Technology | On-chip Flash (non-volatile) | On-chip Flash | On-chip Flash | On-chip Flash | On-chip Flash |
Principaux différenciateurs
- ARM Cortex-M1 hard processor integrated (vs A3P600-1FG484)
- Industrial-grade drop-in availability (vs M1AFS600-FG484I)
- In-place density migration path (vs M1AFS1500-FG484K)
- Non-volatile flash configuration (vs SRAM FPGAs (Xilinx/Altera equivalents))
Notes de conception
Estimate power early using Microchip/Microsemi Libero SoC SmartPower, since flash FPGA static current differs from SRAM FPGA leakage and depends on temperature and toggling activity. Multi-bank I/O means each bank needs its own decoupling: place at least one 0.1 uF ceramic per I/O bank supply pin pair plus bulk 10 uF near the regulator. Verify power-rail sequencing requirements in the Fusion datasheet before sharing regulators with other rails.
The 484-FBGA footprint is a fine-pitch area-array package; define the land pattern exactly per the manufacturer's package drawing and inspect with X-ray after reflow, since collapsed balls under the array are invisible optically. Fan out using via-in-pad or dog-bone escape patterns with 0.2-0.3 mm microvias on inner layers. Connect the die-attached thermal balls to a ground pour rather than leaving them floating, improving heat spreading without a heatsink.
The K suffix on M1AFS600-FG484K denotes a commercial temperature grade - do not deploy it in industrial enclosures; substitute the pin-compatible M1AFS600-FG484I instead. Second, although configuration is on-chip flash, do not omit the JTAG programming header - field updates and debug depend on it. Third, I/O bank voltage constraints in Libero must be validated before board sign-off; mixing incompatible bank voltages on shared rails causes damage not protected by clamps.
Informations de conformité
Compliance status not stated in the retrieved distributor data; confirm RoHS/REACH on the Microchip product page or material declaration report.
