M2GL005-TQ144 6K IGLOO2 Flash FPGA | Microchip
Référence : M2GL005-TQ144 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $30.51 | $30,51 |
| 10 | $28.9 | $289,00 |
| 100 | $25.75 | $2 575,00 |
| 500 | $22.9 | $11 450,00 |
| 1 000 | $20.45 | $20 450,00 |
M2GL005-TQ144 Présentation
An FPGA is a programmable semiconductor whose logic fabric can be configured after manufacture. Within the product hierarchy, the M2GL005-TQ144 is an IGLOO2 device, then a low-density flash FPGA, then a programmable-logic IC and semiconductor. Its flash configuration memory allows the device to retain its programmed configuration, while its programmable I/O and logic resources support interfaces that would otherwise require multiple fixed-function components.
The verified product data identifies 6,060 FPGA cells, a 1.2 V core voltage, and a 144-pin LQFP/TQFP package. The related M2GL005 comparison data also identifies 703 Kbit of fabric RAM and 128 Kbit of embedded nonvolatile memory for the M2GL005 family. Exact device-specific operating-temperature, I/O-standard, speed-grade, and electrical details should be confirmed in the Microchip IGLOO2 datasheet before release to production.
Compared with an equivalent CPLD, the IGLOO2 architecture provides substantially greater logic capacity and flexible routing for multi-block control logic. It is suitable for communications, industrial, and embedded applications where parallel interfaces, protocol bridging, acquisition support, or supervisory logic must be consolidated into one programmable device.
Typical implementations include dual PCI Express control-plane functions, Gigabit Ethernet bridging, serial-to-parallel data conversion, I/O expansion, and centralized system management. The 144-pin package provides a practical balance between programmable I/O availability and board-space requirements for compact embedded systems.
For layout, follow the Microchip IGLOO2 pin and package documentation for bank assignments, pin constraints, and supported voltage standards. Configuration, programming, JTAG, and power-up behavior must also be checked against the system clocking and reset architecture rather than inferred from the distributor listing.
Alternatives de remplacement direct pour M2GL005-TQ144 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
M2GL005-TQG144
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
M2GL005-TQG144I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
M2GL005-TQ144I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
M2GL005S-TQ144
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
M2S005S-TQ144
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
M2GL005-TQ144 Valeurs maximales et caractéristiques électriques
| Device Type | IGLOO2 low-density flash FPGA |
| Logic Elements | 6,060 cells |
| Core Operating Voltage | 1.2 V |
| Fabric RAM | 703 Kbit |
| Embedded Nonvolatile Memory | 128 Kbit |
| Boîtier | 144-pin LQFP/TQFP |
| Package Dimensions | 20 mm x 20 mm |
| Package Pitch | 0.5 mm |
| Type de montage | Surface mount |
| Programmable Logic Type | Field-programmable gate array |
| Configuration Memory | Flash |
| Supported Application Domains | Communications, industrial, and embedded control |
| General-Purpose Functions | Bridging, I/O expansion, conversion, system management, and secure connectivity |
| Statut RoHS | Compliant |
Guide de configuration des broches du M2GL005-TQ144 0.5 mm
Configuration des broches du M2GL005-TQ144 (boîtier 0.5 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour M2GL005-TQ144.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
M2GL005-TQ144 convient pour 6 applications: Gigabit Ethernet Bridging, PCI Express Control-Plane Logic, Industrial Protocol Conversion, System I/O Expansion, Embedded Data Acquisition Control, Secure Connectivity and Authentication.
Gigabit Ethernet Bridging
The M2GL005-TQ144 fits bridging logic where 6,060 programmable logic cells provide more flexibility than a small CPLD. The verified Microchip product page identifies Gigabit Ethernet bridging as a target application for low-density IGLOO2 devices, and the family comparison data identifies 703 Kbit of fabric RAM for packet buffering or state handling. Its 144-pin TQFP package also offers a substantial I/O complement for status, control, and multi-bit data paths. Before schematic release, engineers should confirm the exact I/O count, supported voltage standards, bank assignments, and timing constraints in the manufacturer pin guide. The principal benefit is consolidating fixed glue logic into a single reprogrammable flash FPGA while retaining low core voltage operation at 1.2 V.
Recommandé
PCI Express Control-Plane Logic
The M2GL005-TQ144 is suitable for low-speed control-plane functions where programmable logic consolidates status decoding, register handling, arbitration, and peripheral interfacing. Microchip explicitly describes dual PCI Express control-plane control as an IGLOO2 application, while this device provides 6,060 logic cells and a 1.2 V core. The 144-pin TQFP package is useful when the board must expose multiple parallel control signals. Engineers must still validate PCI Express I/O standard support, timing, voltage-bank restrictions, and the device’s documented electrical characteristics against the target system. This use emphasizes the M2GL005 as an adaptable auxiliary control device rather than a complete endpoint implementation.
Recommandé
Industrial Protocol Conversion
The M2GL005-TQ144 can consolidate parallel-to-serial conversion, protocol framing, and supervisory logic for industrial equipment. Its 6,060-cell flash FPGA fabric is larger than a conventional small CPLD, while flash configuration supports persistent programming after board configuration. The 144-pin TQFP package provides enough physical pins for wider data buses and control signals than a compact low-pin-count package. For an industrial deployment, verify the ordering code’s temperature grade, I/O voltage banks, clocking resources, and timing against the required operating environment. The key advantage is adaptable hardware that can accommodate field-specific protocols without changing the printed circuit board.
Recommandé
System I/O Expansion
The M2GL005-TQ144 is well suited to adding programmable I/O logic around a microcontroller or application processor. With 6,060 logic cells, the device can implement registers, arbitration, interrupt control, level shifting interfaces, and protocol-specific adapters while avoiding a large FPGA. Its 144-pin TQFP package provides a practical route for exposing multiple discrete signals, and the verified family data identifies 128 Kbit of embedded nonvolatile memory for configuration or data-retention use cases. Designers should confirm the exact user-I/O quantity and allowed I/O standards because they are not present in the supplied snippets. The device is especially attractive when the expansion logic must be revised through firmware or bitstream updates.
Recommandé
Embedded Data Acquisition Control
The M2GL005-TQ144 can coordinate converters, buffers, counters, and digital interfaces in compact acquisition equipment. Its programmable fabric allows control sequencing and data-path logic to be combined without relying exclusively on a microcontroller, while 703 Kbit of fabric RAM supports temporary buffering identified in the verified family comparison. The 144-pin TQFP package is useful for parallel ADC or DAC interfaces. Signal-integrity work should include assigning banks according to the supported voltage standards, constraining clocks through the available clock resources, and validating timing with the Microchip implementation tools. The principal benefit is a compact, reprogrammable control layer around external analog and mixed-signal components.
Recommandé
Secure Connectivity and Authentication
The M2GL005-TQ144 can support secure connectivity front ends by implementing protocol framing, command parsing, authentication helpers, and peripheral arbitration in flash-programmable logic. Microchip identifies secure connectivity among the target functions for its low-density IGLOO2 FPGAs. The 6,060-cell device offers enough fabric for moderate parallel processing while operating from a 1.2 V core, and its embedded nonvolatile memory provides 128 Kbit in the verified family data. Security engineers should still treat the device as a programmable platform rather than an automatic security solution, adding external key storage, authentication, anti-tamper measures, and update controls where required. This application benefits from both logic capacity and persistent configuration.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour M2GL005-TQ144 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | M2GL005-TQG144 | M2GL005-TQG144I | M2GL005-TQ144I | M2GL005S-TQ144 | M2S005S-TQ144 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-144 | TQFP-144 | TQFP-144 | TQFP-144 | TQFP-144 | TQFP-144 |
| Series | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 | M2S family |
Principaux différenciateurs
- Same verified 6,060-cell IGLOO2 architecture across the closest ordering variants (vs M2GL005-TQG144)
- Industrial-ordering option available without changing the mechanical footprint (vs M2GL005-TQG144I)
- Broader verified package and supply-chain references than an unverified cross-brand substitute (vs M2S005S-TQ144)
Notes de conception
Use the verified 144-pin TQFP footprint with a 20 mm by 20 mm body and 0.5 mm pitch. Confirm courtyard, lead span, solder-mask, and paste-land geometry against the current Microchip package drawing rather than scaling a generic TQFP symbol. Because the supplied web data does not enumerate all 144 pin names, validate every power, ground, configuration, clock, and user-I/O connection against the official IGLOO2 pin-description guide before fabrication.
Plan the 1.2 V core rail and every required I/O-bank supply independently, following the datasheet’s voltage and sequencing constraints. Do not infer allowable bank voltages, tolerances, or current limits from distributor snippets. Decoupling should be placed at the associated package pins with very short return paths, and unused power and ground pins must follow the manufacturer’s mandatory connection requirements. Review the exact ordering suffix before fixing the power architecture.
Do not treat TQG144, TQ144, TQ144I, and S-suffix order codes as automatically interchangeable. The verified pages establish family identity and package similarity, but they do not quantify every speed, temperature, qualification, or marking difference. Before substitution, compare the complete Microchip ordering information, operating-temperature grade, I/O-bank ratings, configuration method, and any published migration guidance. This prevents a mechanically correct replacement from becoming an electrical or qualification mismatch.
Assign clocks, high-speed interfaces, and sensitive I/O deliberately in the FPGA design rather than relying only on automatic placement. Follow Microchip’s pin and package guidance for bank assignment, clock routing, and supported I/O standards. For adjacent parallel data paths, control return-current continuity and minimize stubs; then verify timing post-layout with the vendor implementation tools. The 6,060-cell device offers flexibility, but poor constraints or banking can make a valid design fail electrically.
Informations de conformité
RoHS compliance is explicitly stated in the verified FindIC result for M2GL005-TQG144. The supplied M2GL005-TQ144 snippets do not explicitly establish REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is marked not applicable because this is an FPGA rather than an automotive-qualified device in the provided data.
