M2GL005-TQ144 6K IGLOO2 Flash FPGA | Microchip
N.º de pieza: M2GL005-TQ144 ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $30.51 | $30,51 |
| 10 | $28.9 | $289,00 |
| 100 | $25.75 | $2.575,00 |
| 500 | $22.9 | $11.450,00 |
| 1.000 | $20.45 | $20.450,00 |
M2GL005-TQ144 Descripción general
An FPGA is a programmable semiconductor whose logic fabric can be configured after manufacture. Within the product hierarchy, the M2GL005-TQ144 is an IGLOO2 device, then a low-density flash FPGA, then a programmable-logic IC and semiconductor. Its flash configuration memory allows the device to retain its programmed configuration, while its programmable I/O and logic resources support interfaces that would otherwise require multiple fixed-function components.
The verified product data identifies 6,060 FPGA cells, a 1.2 V core voltage, and a 144-pin LQFP/TQFP package. The related M2GL005 comparison data also identifies 703 Kbit of fabric RAM and 128 Kbit of embedded nonvolatile memory for the M2GL005 family. Exact device-specific operating-temperature, I/O-standard, speed-grade, and electrical details should be confirmed in the Microchip IGLOO2 datasheet before release to production.
Compared with an equivalent CPLD, the IGLOO2 architecture provides substantially greater logic capacity and flexible routing for multi-block control logic. It is suitable for communications, industrial, and embedded applications where parallel interfaces, protocol bridging, acquisition support, or supervisory logic must be consolidated into one programmable device.
Typical implementations include dual PCI Express control-plane functions, Gigabit Ethernet bridging, serial-to-parallel data conversion, I/O expansion, and centralized system management. The 144-pin package provides a practical balance between programmable I/O availability and board-space requirements for compact embedded systems.
For layout, follow the Microchip IGLOO2 pin and package documentation for bank assignments, pin constraints, and supported voltage standards. Configuration, programming, JTAG, and power-up behavior must also be checked against the system clocking and reset architecture rather than inferred from the distributor listing.
Alternativas directas para M2GL005-TQ144 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
M2GL005-TQG144
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
M2GL005-TQG144I
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
M2GL005-TQ144I
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
M2GL005S-TQ144
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
M2S005S-TQ144
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
M2GL005-TQ144 Valores máximos y características eléctricas
| Device Type | IGLOO2 low-density flash FPGA |
| Logic Elements | 6,060 cells |
| Core Operating Voltage | 1.2 V |
| Fabric RAM | 703 Kbit |
| Embedded Nonvolatile Memory | 128 Kbit |
| Encapsulado | 144-pin LQFP/TQFP |
| Package Dimensions | 20 mm x 20 mm |
| Package Pitch | 0.5 mm |
| Tipo de montaje | Surface mount |
| Programmable Logic Type | Field-programmable gate array |
| Configuration Memory | Flash |
| Supported Application Domains | Communications, industrial, and embedded control |
| General-Purpose Functions | Bridging, I/O expansion, conversion, system management, and secure connectivity |
| Estado RoHS | Compliant |
Guía de configuración de pines de M2GL005-TQ144 0.5 mm
Configuración de pines para M2GL005-TQ144 (encapsulado 0.5 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para M2GL005-TQ144.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
M2GL005-TQ144 es adecuado para 6 aplicacións: Gigabit Ethernet Bridging, PCI Express Control-Plane Logic, Industrial Protocol Conversion, System I/O Expansion, Embedded Data Acquisition Control, Secure Connectivity and Authentication.
Gigabit Ethernet Bridging
The M2GL005-TQ144 fits bridging logic where 6,060 programmable logic cells provide more flexibility than a small CPLD. The verified Microchip product page identifies Gigabit Ethernet bridging as a target application for low-density IGLOO2 devices, and the family comparison data identifies 703 Kbit of fabric RAM for packet buffering or state handling. Its 144-pin TQFP package also offers a substantial I/O complement for status, control, and multi-bit data paths. Before schematic release, engineers should confirm the exact I/O count, supported voltage standards, bank assignments, and timing constraints in the manufacturer pin guide. The principal benefit is consolidating fixed glue logic into a single reprogrammable flash FPGA while retaining low core voltage operation at 1.2 V.
Recomendado
PCI Express Control-Plane Logic
The M2GL005-TQ144 is suitable for low-speed control-plane functions where programmable logic consolidates status decoding, register handling, arbitration, and peripheral interfacing. Microchip explicitly describes dual PCI Express control-plane control as an IGLOO2 application, while this device provides 6,060 logic cells and a 1.2 V core. The 144-pin TQFP package is useful when the board must expose multiple parallel control signals. Engineers must still validate PCI Express I/O standard support, timing, voltage-bank restrictions, and the device’s documented electrical characteristics against the target system. This use emphasizes the M2GL005 as an adaptable auxiliary control device rather than a complete endpoint implementation.
Recomendado
Industrial Protocol Conversion
The M2GL005-TQ144 can consolidate parallel-to-serial conversion, protocol framing, and supervisory logic for industrial equipment. Its 6,060-cell flash FPGA fabric is larger than a conventional small CPLD, while flash configuration supports persistent programming after board configuration. The 144-pin TQFP package provides enough physical pins for wider data buses and control signals than a compact low-pin-count package. For an industrial deployment, verify the ordering code’s temperature grade, I/O voltage banks, clocking resources, and timing against the required operating environment. The key advantage is adaptable hardware that can accommodate field-specific protocols without changing the printed circuit board.
Recomendado
System I/O Expansion
The M2GL005-TQ144 is well suited to adding programmable I/O logic around a microcontroller or application processor. With 6,060 logic cells, the device can implement registers, arbitration, interrupt control, level shifting interfaces, and protocol-specific adapters while avoiding a large FPGA. Its 144-pin TQFP package provides a practical route for exposing multiple discrete signals, and the verified family data identifies 128 Kbit of embedded nonvolatile memory for configuration or data-retention use cases. Designers should confirm the exact user-I/O quantity and allowed I/O standards because they are not present in the supplied snippets. The device is especially attractive when the expansion logic must be revised through firmware or bitstream updates.
Recomendado
Embedded Data Acquisition Control
The M2GL005-TQ144 can coordinate converters, buffers, counters, and digital interfaces in compact acquisition equipment. Its programmable fabric allows control sequencing and data-path logic to be combined without relying exclusively on a microcontroller, while 703 Kbit of fabric RAM supports temporary buffering identified in the verified family comparison. The 144-pin TQFP package is useful for parallel ADC or DAC interfaces. Signal-integrity work should include assigning banks according to the supported voltage standards, constraining clocks through the available clock resources, and validating timing with the Microchip implementation tools. The principal benefit is a compact, reprogrammable control layer around external analog and mixed-signal components.
Recomendado
Secure Connectivity and Authentication
The M2GL005-TQ144 can support secure connectivity front ends by implementing protocol framing, command parsing, authentication helpers, and peripheral arbitration in flash-programmable logic. Microchip identifies secure connectivity among the target functions for its low-density IGLOO2 FPGAs. The 6,060-cell device offers enough fabric for moderate parallel processing while operating from a 1.2 V core, and its embedded nonvolatile memory provides 128 Kbit in the verified family data. Security engineers should still treat the device as a programmable platform rather than an automatic security solution, adding external key storage, authentication, anti-tamper measures, and update controls where required. This application benefits from both logic capacity and persistent configuration.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para M2GL005-TQ144 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | M2GL005-TQG144 | M2GL005-TQG144I | M2GL005-TQ144I | M2GL005S-TQ144 | M2S005S-TQ144 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-144 | TQFP-144 | TQFP-144 | TQFP-144 | TQFP-144 | TQFP-144 |
| Series | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 | M2S family |
Diferenciadores clave
- Same verified 6,060-cell IGLOO2 architecture across the closest ordering variants (frente a M2GL005-TQG144)
- Industrial-ordering option available without changing the mechanical footprint (frente a M2GL005-TQG144I)
- Broader verified package and supply-chain references than an unverified cross-brand substitute (frente a M2S005S-TQ144)
Notas de diseño
Use the verified 144-pin TQFP footprint with a 20 mm by 20 mm body and 0.5 mm pitch. Confirm courtyard, lead span, solder-mask, and paste-land geometry against the current Microchip package drawing rather than scaling a generic TQFP symbol. Because the supplied web data does not enumerate all 144 pin names, validate every power, ground, configuration, clock, and user-I/O connection against the official IGLOO2 pin-description guide before fabrication.
Plan the 1.2 V core rail and every required I/O-bank supply independently, following the datasheet’s voltage and sequencing constraints. Do not infer allowable bank voltages, tolerances, or current limits from distributor snippets. Decoupling should be placed at the associated package pins with very short return paths, and unused power and ground pins must follow the manufacturer’s mandatory connection requirements. Review the exact ordering suffix before fixing the power architecture.
Do not treat TQG144, TQ144, TQ144I, and S-suffix order codes as automatically interchangeable. The verified pages establish family identity and package similarity, but they do not quantify every speed, temperature, qualification, or marking difference. Before substitution, compare the complete Microchip ordering information, operating-temperature grade, I/O-bank ratings, configuration method, and any published migration guidance. This prevents a mechanically correct replacement from becoming an electrical or qualification mismatch.
Assign clocks, high-speed interfaces, and sensitive I/O deliberately in the FPGA design rather than relying only on automatic placement. Follow Microchip’s pin and package guidance for bank assignment, clock routing, and supported I/O standards. For adjacent parallel data paths, control return-current continuity and minimize stubs; then verify timing post-layout with the vendor implementation tools. The 6,060-cell device offers flexibility, but poor constraints or banking can make a valid design fail electrically.
Información de cumplimiento
RoHS compliance is explicitly stated in the verified FindIC result for M2GL005-TQG144. The supplied M2GL005-TQ144 snippets do not explicitly establish REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is marked not applicable because this is an FPGA rather than an automotive-qualified device in the provided data.
