MAP1806 - PCIe 5.0 NVMe Controller | Maxio
Référence : MAP1806 ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
MAP1806 Présentation
An NVMe SSD controller is a type of semiconductor interface controller that coordinates a host PCIe link, NAND flash channels, command processing, data transfer, and storage-management functions. It sits within the hierarchy of solid-state-drive controller, storage semiconductor, PCIe interface device, and semiconductor. MAP1806 is relevant to high-capacity, high-speed NVMe SSD designs where the controller must aggregate multiple NAND devices into a reliable storage subsystem.
The verified search results report eight channels with four CEs, NAND Flash speeds up to 3,600 MT/s, and a maximum SSD performance figure of 14.8 GB/s. One result associates the MAP1806A-F2C variant with a Lexar NM990 PCIe 5.0 x4 SSD, while another describes the MAP1806 as a consumer PCIe Gen5 SSD controller. These reports are useful application context, but they do not establish the complete electrical specification, pinout, package outline, or qualified replacement status.
Typical uses include client PCIe 5.0 NVMe SSDs, high-speed desktop storage, workstation storage, and external storage systems that use an appropriate enclosure and thermal design. The controller should be selected only after confirming the exact package, firmware support, NAND compatibility, power requirements, signal integrity, and thermal constraints with the manufacturer.
A key design consideration is that controller performance depends on the complete storage path, including NAND type, channel population, PCIe link behavior, firmware, and thermal management. Do not infer guaranteed SSD throughput from the controller headline alone. Verify the final design against the manufacturer’s current documentation and qualification information.
This page separates the verified MAP1806 controller references from unrelated results that reuse the identifier for sensors, cutting tools, and hardware. It also distinguishes reported technical observations from missing datasheet data. Pricing, stock, pinout, package details, compliance, and drop-in alternatives are not established by the supplied search results and should not be treated as purchase-ready facts.
Alternatives de remplacement direct pour MAP1806 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MAP1806A-F2C
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MAP1806
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →PCIe 5.0 NVMe SSD controller
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PCIe 5.0 x4 SSD controller
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PCIe Gen5 SSD controller
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MAP1806 Valeurs maximales et caractéristiques électriques
| Product Type | PCIe 5.0 x4 NVMe SSD controller |
| PCIe Interface | PCIe 5.0 x4 |
| Reported Maximum SSD Performance | 14.8 GB/s |
| NAND Channels | 8 channels |
| Chip Enables | 4 CEs |
| Supported NAND Flash Speed | Up to 3600 MT/s |
| Die Size | 11 mm × 14.5 mm |
| Related SSD Controller Variant | MAP1806A-F2C |
| Storage Interface | NVMe over PCIe |
| Controller Use Case | High-speed solid-state drives |
Guide de configuration des broches du MAP1806 high-speed solid-state drives
Configuration des broches du MAP1806 (boîtier high-speed solid-state drives). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour MAP1806.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MAP1806 convient pour 6 applications: Consumer PCIe 5.0 NVMe SSD, High-speed desktop storage, Workstation NVMe storage, External PCIe 5.0 storage enclosure, Compact gaming storage, PCIe 5.0 storage development platform.
Consumer PCIe 5.0 NVMe SSD
The MAP1806 fits a consumer PCIe Gen5 NVMe SSD platform because the verified results associate it with a PCIe 5.0 x4 interface and SSD performance reported up to 14.8 GB/s. It can coordinate the host link and eight reported NAND channels for a high-bandwidth solid-state drive. The actual design must match the intended NAND population, channel organization, ECC requirements, and firmware. Because package, pinout, power, and thermal data are absent from the supplied results, engineers should verify those items with Maxio before layout or production. The controller’s headline capability should be validated with the complete SSD rather than treated as a guaranteed transfer rate.
Recommandé
High-speed desktop storage
The MAP1806 is relevant to a high-speed desktop storage design seeking PCIe 5.0 x4 connectivity and reported SSD throughput of up to 14.8 GB/s. Eight NAND channels and four reported chip-enable signals can support a wide storage configuration, while NAND speeds up to 3,600 MT/s are reported in the verified results. Desktop users may benefit from faster sequential transfers, but sustained performance depends on thermal design, NAND type, firmware, and workload. Confirm package, power rails, pinout, and operating-temperature limits before using the controller in a compact workstation enclosure.
Recommandé
Workstation NVMe storage
The MAP1806 may serve a workstation NVMe drive when the application needs a PCIe 5.0 x4 storage path and high sequential throughput. The verified material reports up to 14.8 GB/s and identifies consumer PCIe Gen5 SSD controller use, making it a candidate for a performance-oriented workstation rather than a fully qualified enterprise controller by assumption. A workstation implementation should test sustained transfers, thermals, power management, and workload latency. Server-grade endurance, power-loss protection, and validation are not provided for MAP1806 and must be confirmed separately if the drive is intended for critical data.
Recommandé
External PCIe 5.0 storage enclosure
The MAP1806 can be evaluated for an external PCIe 5.0 storage enclosure that preserves a high-speed host interface and uses a compatible NVMe SSD design. The reported eight-channel architecture and NAND speed capability may be useful for dense storage products, but enclosure thermics often limit sustained SSD performance. The controller’s package, pinout, power requirements, and thermal limits are not present in the verified data, so the design must be reviewed against the enclosure’s connector, heat-spreader, airflow, and power-delivery constraints. Validate the completed enclosure rather than relying only on controller benchmarks.
Recommandé
Compact gaming storage
The MAP1806 is a candidate for a gaming PC or compact high-performance system that supports PCIe 5.0 NVMe storage. The reported controller generation and up-to-14.8-GB/s SSD performance can help reduce interface bottlenecks for sequential workloads, while eight reported NAND channels provide a basis for high-capacity consumer SSDs. Gaming systems also require careful attention to thermals, power, and boot compatibility. Since the verified data does not specify package, pinout, operating temperature, or lifecycle status, validate the exact SSD implementation and obtain manufacturer approval before using MAP1806 in a production gaming platform.
Recommandé
PCIe 5.0 storage development platform
The MAP1806 is suitable as the subject of a PCIe 5.0 storage development platform when an engineering team is evaluating high-speed NVMe controller architectures. The verified results provide concrete targets to investigate: PCIe 5.0 x4, eight NAND channels, four chip-enable signals, NAND operation up to 3,600 MT/s, and an 11 mm × 14.5 mm reported die. A development program should request the package, pinout, power tree, reference design, firmware requirements, and validation limits from Maxio. Prototype testing should include signal integrity, thermal cycling, error recovery, power-loss behavior, and sustained throughput before any consumer or workstation release.
Recommandé
Données de référence d'ingénierie pour MAP1806 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MAP1806A-F2C | PCIe 5.0 NVMe SSD controller | PCIe 5.0 x4 SSD controller | PCIe Gen5 SSD controller |
|---|---|---|---|---|---|
| Product Type | PCIe 5.0 x4 NVMe SSD controller | Related NVMe SSD controller designation; exact product description not fully verified | Generic controller category | Generic controller category | Generic controller category |
Principaux différenciateurs
- High-bandwidth PCIe Gen5 positioning (vs Generic PCIe 5.0 NVMe SSD controller)
- Eight-channel NAND organization (vs PCIe 5.0 x4 SSD controller)
- Related SSD implementation evidence (vs PCIe Gen5 SSD controller)
- Reported NAND speed capability (vs PCIe 5.0 NVMe SSD controller)
Notes de conception
Do not treat every listing using MAP1806 as the same component. The verified search set includes Maxio storage-controller references alongside WAI automotive sensors, Kyocera tooling hardware, and unrelated catalog entries. Confirm the manufacturer, technical description, package, and ordering code before comparing prices or approving a substitute. For the controller, obtain the current Maxio datasheet and package drawing first; neither the pinout nor the package can be safely inferred from the reported die size.
A PCIe 5.0 x4 SSD controller design requires high-speed PCIe signal-integrity analysis, including lane impedance, insertion loss, return loss, crosstalk, connector transitions, and reference-clock routing. The supplied data does not provide the package pinout, ball assignments, or recommended PCB stack-up, so layout values must come from the manufacturer’s design guidance. Prototype validation should include PCIe link training, error counters, hot-plug behavior where applicable, and temperature-correlated eye-margin measurements before production release.
The verified results report an 11 mm × 14.5 mm die and SSD-level performance up to 14.8 GB/s, but no package thermal resistance, controller power, or junction-temperature limit. Do not estimate production thermals from die size alone. Obtain the controller power budget, package details, NAND power, SSD airflow assumptions, and target ambient temperature from Maxio. Validate sustained sequential and mixed workloads with the intended enclosure or heatsink, and check thermal throttling, data integrity, and recovery behavior at the worst-case operating condition.
The MAP1806 package is listed as [DATA_NEEDED: package], so a pin assignment, land pattern, exposed-pad treatment, and BOM recommendation cannot be responsibly specified from the supplied data. Before layout, obtain the official package drawing and recommended footprint. Verify whether the controller uses a ball grid array, flip-chip package, or another assembly method, then follow the manufacturer’s escape-routing, via, solder-mask, and reflow recommendations. A copied footprint from another PCIe controller is not acceptable without a documented mechanical and electrical match.
The available material does not provide MAP1806 input-voltage rails, current consumption, power states, power-good behavior, or power-loss recovery requirements. A complete SSD power tree must be designed from manufacturer requirements, including controller startup sequencing, NAND rails, PCIe auxiliary power, current transients, decoupling, and thermal margins. Do not reuse a generic PCIe 5.0 power design merely because the interface matches. Validate load-step behavior, power cycling, brownout behavior, and recovery after unexpected power removal using the final NAND configuration.
Informations de conformité
The supplied verified data does not include RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations for the Maxio MAP1806. Obtain current compliance documents from Maxio or an authorized distributor.