Texas Instruments

MAX202CDRE4 - 5V Dual RS-232 Transceiver | Texas Instruments

Référence : MAX202CDRE4 ✓ Actif
5 V Vdss 16-pin SOIC, 3.90 mm width Package
MOQ : 1 |

MAX202CDRE4 Présentation

The Texas Instruments MAX202CDRE4 is a 5 V dual RS-232 line driver and receiver that combines two drivers and two receivers in a 16-pin SOIC package. It supports data rates up to 120 kbit/s, provides ±15 kV ESD protection on the RS-232 bus pins, and operates from a single 5 V supply. The MAX202 family uses on-chip charge-pump circuitry to generate the bipolar RS-232 line voltages while requiring four external 0.1 µF capacitors.

An RS-232 transceiver is an interface IC that bridges a logic-level digital system and a single-ended, bipolar serial bus. Its driver section converts TTL or CMOS logic levels into RS-232 levels, while its receiver section converts RS-232 signals back into logic-compatible levels. Within the broader semiconductor hierarchy, the MAX202CDRE4 belongs to the interface-IC class, specifically the RS-232 line-driver and receiver family.

Key features include a 5 V operating supply, support for communication rates up to 120 kbit/s, four integrated charge-pump voltage converters, and ±15 kV human-body-model ESD protection. The bus-side pins meet or exceed TIA/EIA-232-F and ITU V.28 requirements. Shutdown behavior and exact supply-current limits should be confirmed against the manufacturer datasheet before finalizing a power budget.

The internal charge-pump architecture allows the device to operate without a separate ±12 V supply. This reduces external power infrastructure and board complexity compared with discrete RS-232 driver and receiver implementations. The trade-off is that charge-pump circuitry and line-driver stages dissipate power in the interface, so the final thermal design should account for the selected data rate, load, supply voltage, and ambient temperature.

Typical applications include industrial serial-port interfaces, point-of-sale equipment, data-acquisition systems, instrumentation, and embedded control systems. A system designer can connect the MAX202CDRE4 between a microcontroller or host processor with UART logic I/O and an isolated or non-isolated RS-232 connector. External protection, grounding, and isolation remain important when the cable leaves the equipment enclosure.

For PCB implementation, place all four 0.1 µF charge-pump capacitors close to their designated pins and route RS-232 outputs away from sensitive clock and analog signals. Keep the connector interface and transceiver on the same ground reference when using a non-isolated implementation. Confirm pin orientation, exposed supply requirements, and unused-pin treatment using the manufacturer pin-description table.

This page combines device specifications, verified source links, drop-in replacement analysis, application guidance, and package-aware design considerations to support faster component selection and PCB implementation for 5 V RS-232 interfaces.

Alternatives de remplacement direct pour MAX202CDRE4 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec MAX202CDRE4 (même facteur de forme et même empreinte) — différant par Package.

STMicroelectronics
Package: SOIC-16 (SO-16)
Comparer avec MAX202CDRE4 →

ST202CDR

✅ Remplacement direct
📦 SOIC-16
Same dual-driver, dual-receiver RS-232 function and 5 V supply; data rate and exact electrical limits differ by up to 30%

📋 Alternative de référence (hors catalogue)

ST202BDR

✅ Remplacement direct
STMicroelectronics
📦 SOIC-16
RS-232 Transceiver (2 Drivers / 2 Receivers) · EIA/TIA-232, V.28 · 4.5 V to 5.5 V · 1.5 mA · 400 kbps · +/- 9 V · 12 V/us · 0.1 us

Contactez-nous pour le prix

Voir la fiche technique →

MAX202CDRE4 Spécifications

Product Type Dual RS-232 line driver and receiver
Number of Drivers 2
Number of Receivers 2
Tension d'alimentation 5 V
Maximum Data Rate 120 kbit/s
ESD Protection ±15 kV human-body model
External Capacitors 4 × 0.1 µF
RS-232 Standard Compliance TIA/EIA-232-F and ITU V.28
Boîtier 16-pin SOIC, 3.90 mm width
Terminal Count 16
Type de montage Surface mount
Temperature Grade Commercial

Guide de configuration des broches du MAX202CDRE4 16-pin soic, 3.90 mm width

Configuration des broches du MAX202CDRE4 (boîtier 16-pin soic, 3.90 mm width). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 16-pin soic, 3.90 mm width pour le MAX202CDRE4

Aucune donnée de brochage détaillée disponible pour MAX202CDRE4.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

MAX202CDRE4 convient pour 6 applications: Industrial UART Serial Interface, Point-of-Sale Terminal Interface, Instrumentation and Test Equipment, Embedded Control and Data Acquisition, Serial Network Maintenance Port, RS-232 Communication Adapter.

🏭

Industrial UART Serial Interface

The MAX202CDRE4 fits industrial controller and data-acquisition equipment that must translate host UART logic into RS-232 levels. Its two drivers and two receivers support bidirectional communication, while operation from one 5 V rail avoids a separate negative supply. The 120 kbit/s capability is appropriate for many legacy serial devices, but cable length, connector wiring, and grounding must be checked. Place the four 0.1 µF capacitors close to the charge-pump pins and provide suitable protection at an exposed connector.

🖥️

Point-of-Sale Terminal Interface

The MAX202CDRE4 can connect a point-of-sale controller or peripheral to a legacy RS-232 port using only a 5 V system supply. Two drivers allow command or status transmission, and two receivers support incoming device data. Its ±15 kV human-body-model ESD protection strengthens the bus interface, although it does not replace surge protection for cables extending beyond the enclosure. The 16-pin SOIC also permits a compact layout beside the connector and UART circuitry.

🔧

Instrumentation and Test Equipment

The MAX202CDRE4 is useful in laboratory and industrial instrumentation that must exchange data with RS-232 test equipment. A single 5 V supply simplifies system power architecture, and the 120 kbit/s limit accommodates common serial-control and data-transfer rates. Because the bus uses bipolar signaling, maintain the intended ground reference and avoid routing the RS-232 traces as if they were low-voltage UART signals. Use short, properly terminated charge-pump connections and follow the manufacturer layout for reliable transient behavior.

🧩

Embedded Control and Data Acquisition

The MAX202CDRE4 can bridge a microcontroller UART and an RS-232-equipped sensor, controller, or service port. The 5 V supply operation is convenient for embedded systems that already regulate a 5 V rail, while the dual-channel arrangement allows two RS-232 links in one package. Ensure the microcontroller's logic levels meet the MAX202 input thresholds and that the receiver outputs remain compatible with its supply. Firmware should account for the practical limitations imposed by cable capacitance and connected-device loading.

🌐

Serial Network Maintenance Port

The MAX202CDRE4 is appropriate for a network-device maintenance shell that exposes an RS-232 console through a dedicated connector. The 120 kbit/s rate is more than sufficient for terminal sessions, configuration commands, and diagnostic logs. The device's documented ESD protection is valuable at an accessible connector, but proper chassis grounding and cable-routing practices remain important. A production design should also evaluate whether the service interface needs galvanic isolation rather than a direct ground-coupled MAX202 connection.

📱

RS-232 Communication Adapter

The MAX202CDRE4 can serve as the core of a compact RS-232 communication adapter for legacy printers, scales, meters, or laboratory devices. Its integrated charge pumps produce RS-232-compatible line levels from one 5 V supply, while two drivers and two receivers provide flexible channel allocation. The design must follow the datasheet capacitor connections and maintain pin-compatible routing with any selected replacement. Verify baud rate, logic thresholds, and connector signal assignments before releasing an adapter intended for field deployment.

What is the MAX202CDRE4?
The MAX202CDRE4 is a 5 V, dual RS-232 transceiver from Texas Instruments with two line drivers, two receivers, and ±15 kV human-body-model ESD protection. According to the manufacturer datasheet information, it supports operation up to 120 kbit/s and implements the TIA/EIA-232-F and ITU V.28 interfaces. The device is packaged in a 16-pin SOIC and is intended for systems that need full RS-232 levels from a single positive supply.
What are the key specifications of MAX202CDRE4 that engineers should know?
The MAX202CDRE4 provides two RS-232 drivers and two receivers from one 5 V supply, supports rates up to 120 kbit/s, and includes ±15 kV ESD protection on the bus pins. According to the Texas Instruments MAX202 datasheet information, four external 0.1 µF capacitors support the integrated charge-pump functions. Its 16-pin SOIC package and single-supply operation simplify implementation compared with discrete RS-232 interface circuits requiring bipolar power rails.
What is the operating voltage of MAX202CDRE4?
The MAX202CDRE4 operates from a 5 V supply. According to the Texas Instruments MAX202 datasheet information, the device uses four external 0.1 µF capacitors to support its integrated charge-pump circuitry and does not require a separate negative supply for RS-232 operation. Confirm the allowed supply-voltage tolerance and power-sequencing limits against the manufacturer datasheet before applying the device to a specific power rail.
What is the maximum data rate of MAX202CDRE4?
The MAX202CDRE4 supports RS-232 communication rates up to 120 kbit/s. According to the Texas Instruments MAX202 datasheet information, it contains two drivers and two receivers and operates from a single 5 V supply. This rate is suitable for legacy serial-port, point-of-sale, instrumentation, and embedded-control interfaces, but cable length, capacitance, loading, and signal-integrity margins can reduce the practical usable rate.
Where can I download the MAX202CDRE4 datasheet PDF?
The MAX202CDRE4 manufacturer documentation is reached through the Texas Instruments product and cross-reference resources, while the verified distributor record links directly to the component datasheet. The manufacturer datasheet is the controlling document for pin assignments, charge-pump capacitor values, electrical limits, and application schematics. Use the pin-description and typical-application sections when assigning PCB nets and selecting external components.
Where can I find the MAX202CDRE4 pinout?
The MAX202CDRE4 pinout is defined by the Texas Instruments MAX202 datasheet and its 16-pin SOIC package diagram. The verified device records confirm a 16-terminal SOIC, but they do not expose the complete numbered pin-description table. Use the manufacturer pin-description table when connecting VCC, ground, driver inputs, receiver outputs, charge-pump capacitors, and the eight RS-232 bus pins.
Does the MAX202CDRE4 need external charge-pump capacitors?
Yes. The MAX202CDRE4 requires four external 0.1 µF capacitors for its charge-pump functions. According to the Texas Instruments MAX202 datasheet information, these capacitors support the integrated voltage-conversion circuitry that allows RS-232 operation from a single 5 V supply. Place each capacitor close to its associated device pins and follow the manufacturer layout guidance to minimize loop area and preserve transient performance.
What is the best drop-in replacement for MAX202CDRE4?
The ST202CDR is the best-supported cross-brand candidate identified for the MAX202CDRE4 because it is described as a two-driver, two-receiver RS-232 transceiver using a single 5 V supply and four 0.1 µF external capacitors. The manufacturer information for the MAX202CDRE4 identifies a 16-pin SOIC package, while the replacement comparison record supports equivalent interface functionality. Confirm the exact footprint and pin mapping against the relevant manufacturer datasheet before production use.
Can ST202CDR replace MAX202CDRE4?
The ST202CDR can serve as a candidate replacement for the MAX202CDRE4 because both are dual-driver, dual-receiver RS-232 transceivers designed for a single 5 V supply with four external 0.1 µF capacitors. The cross-reference comparison identifies the ST202 as EIA/TIA-232 and V.28 compatible. Before substitution, verify the 16-pin SOIC footprint, exact pin numbering, electrical limits, and shutdown behavior against both manufacturers' datasheets.
MAX202CDRE4 vs ST202CDR - which is better for an industrial serial port?
Choose the MAX202CDRE4 when its verified ±15 kV ESD protection and established MAX202 design support are priorities. Choose the ST202CDR when its equivalent dual-driver, dual-receiver architecture, single 5 V supply, and four 0.1 µF capacitor arrangement suit the design. The cross-reference data identifies the ST202 as EIA/TIA-232 and V.28 compatible, but enclosure-level surge protection, isolation, grounding, and exact footprint verification remain design-specific requirements.
When should I choose MAX202CDRE4 over ST202CDR?
Choose the MAX202CDRE4 when a system is designed around the MAX202 family, requires the documented ±15 kV human-body-model ESD protection, or has existing component and layout qualifications. The ST202CDR is appropriate when its single-supply RS-232 implementation and documented EIA/TIA-232 and V.28 behavior meet the interface requirements. Both candidates use a similar charge-pump architecture, so the final choice should account for lifecycle, qualification, and exact electrical-limit comparisons.
Is MAX202CDRE4 suitable for a 5 V embedded serial interface?
The MAX202CDRE4 is suitable for a 5 V embedded UART interface that requires true RS-232 electrical levels rather than TTL-level signaling. The device provides two drivers, two receivers, operation up to 120 kbit/s, and ±15 kV human-body-model ESD protection. Place the four 0.1 µF charge-pump capacitors as directed by the datasheet and ensure the host UART operates with logic levels compatible with the MAX202 input thresholds.
Where can I buy MAX202CDRE4 online?
The MAX202CDRE4 can be requested through the Request a Quote form on this page for current commercial availability, lead time, and order handling. The component is identified as a Texas Instruments 16-pin SOIC RS-232 transceiver with a 5 V supply, two drivers, two receivers, and ±15 kV ESD protection. The form is the appropriate channel for a current sourcing quotation rather than relying on a static price page.
What is the lead time for MAX202CDRE4?
The current MAX202CDRE4 lead time should be requested through the Request a Quote form on this page, where current commercial availability can be checked for the exact 16-pin SOIC ordering code. Lead time can vary with order quantity, inventory status, and manufacturing conditions. The verified component listings identify the required MAX202CDRE4 ordering code but do not establish a universal current lead-time commitment.
Is MAX202CDRE4 in stock?
Current MAX202CDRE4 stock status should be confirmed through the Request a Quote form on this page using the exact ordering code MAX202CDRE4. Several verified listings indicate market availability, but inventory quantities and shipment timing can change. The form enables current stock confirmation for the required quantity and packaging without embedding a stale inventory statement in this product record.
What can replace MAX202CDRE4?
The ST202CDR is the principal cross-brand replacement candidate identified for the MAX202CDRE4 because both provide two drivers, two receivers, single 5 V operation, and a four-capacitor charge-pump implementation. The ST202BDR is another closely related candidate in the comparison records. Because exact electrical limits, pin mapping, and package dimensions must be checked independently, use the comparison as a starting point rather than treating the candidates as automatically interchangeable.

Données de référence d'ingénierie pour MAX202CDRE4 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the MAX202CDRE4 when the design requires a Texas Instruments dual RS-232 transceiver with two drivers, two receivers, operation up to 120 kbit/s, and documented ±15 kV human-body-model ESD protection. Its single 5 V supply and four 0.1 µF charge-pump capacitors simplify the power architecture. Consider the ST202CDR when its single-supply EIA/TIA-232 and V.28 implementation meets the interface requirements and a second-source sourcing strategy is valuable. The ST202BDR is another related candidate for dual-driver, dual-receiver designs, but its exact data rate, ESD rating, and electrical limits require direct comparison. Regardless of candidate, verify the 16-pin footprint, pin numbering, logic thresholds, shutdown behavior, capacitor values, and lifecycle status before approving a substitution.

Comparaison avec les alternatives

Paramètre Ce produit ST202CDR ST202BDR
Package 16-pin SOIC, 3.90 mm width SOIC-16 SOIC-16
Brand Texas Instruments STMicroelectronics STMicroelectronics
Device Type 2/2 RS-232 transceiver 2-driver, 2-receiver RS-232 transceiver 2-driver, 2-receiver RS-232 transceiver
Supply Voltage 5 V 5 V 5 V
Number of Drivers 2 2 2
Number of Receivers 2 2 2

Principaux différenciateurs

  • Documented ESD protection for exposed RS-232 connectors (vs ST202CDR)
  • Established 120 kbit/s operating capability (vs ST202BDR)
  • Single-supply implementation with external 0.1 µF charge-pump capacitors (vs ST202CDR)

Notes de conception

Place the four required 0.1 µF charge-pump capacitors directly between their specified device pins and ground. Keep these loops compact to minimize switching-loop area and transient coupling into adjacent UART or analog signals. Route the MAX202CDRE4 ground connection to the same ground system used by the external capacitors, and consult the manufacturer layout example before duplicating the design on a new PCB.

Separate the RS-232 bus conductors from sensitive clock, sensor, and communication traces. Driver outputs are bipolar and can create larger transition amplitudes than TTL signals, so avoid routing them beneath sensitive analog nodes or parallel to long digital buses. Maintain the intended ground reference for a non-isolated RS-232 design and assess whether an isolated interface is required when the connected equipment has a different earth potential.

Do not treat the MAX202CDRE4 as a TTL UART level translator. Its driver inputs and receiver outputs operate at logic levels, while the external bus pins use RS-232 bipolar signaling. Verify the complete pin description, especially charge-pump capacitor connections and supply pins, against the Texas Instruments datasheet. Also avoid assuming that the documented ±15 kV human-body-model ESD rating eliminates the need for external surge and cable protection.

The charge-pump and driver stages dissipate power during operation. Check the manufacturer supply-current and driver-load specifications, then estimate worst-case dissipation from the actual supply voltage, data activity, termination, and ambient temperature. Provide adequate copper around the 16-pin SOIC and maintain unobstructed airflow when the transceiver is mounted near a power converter or another heat-generating component in a sealed enclosure.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The component is described as commercial grade. No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration appears in the cited source data, so those fields remain unknown.

Données vérifiées le : 2026-11-09 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

MAX202CDRE4 datasheet MAX202CDRE4 datasheet pdf MAX202CDRE4 pinout MAX202CDRE4 equivalent MAX202CDRE4 replacement MAX202CDRE4 cross reference MAX202CDRE4 vs ST202CDR MAX202CDRE4 120 kbit/s MAX202CDRE4 16-SOIC Texas Instruments MAX202CDRE4 MAX202CDRE4 RS-232 interface MAX202CDRE4 price

Composants & termes associés

Texas Instruments MAX202CDRE4 MAX202 ST202CDR ST202BDR RS-232 transceiver RS-232 line driver RS-232 receiver interface IC semiconductor TIA/EIA-232-F ITU V.28 ESD protection charge-pump voltage converter single-supply interface SOIC-16 SOIC package family surface-mount package 5 V power supply 120 kbit/s UART industrial serial communication external 0.1 µF capacitor RS-232 connector
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ