Analog Devices

MAX232CEAWE+ - +5V RS-232 Transceiver | Analog Devices

Référence : MAX232CEAWE+ ✓ Actif
+5 V Vdss 16-SOIC Package
MOQ : 1 |

MAX232CEAWE+ Présentation

Analog Devices MAX232CEAWE+ is a +5V-powered, 2/2 RS-232 transceiver designed for EIA/TIA-232E, V.28, and V.24 communications interfaces. The device combines two line drivers and two line receivers in a 16-SOIC package, allowing one component to implement a complete dual-channel RS-232 interface.

An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and RS-232 line drivers and receivers. The MAX232 family belongs to the interface IC hierarchy, where transceiver ICs bridge digital logic systems with the voltage levels, slew rates, and noise-immunity requirements of balanced or unbalanced serial communications. It is particularly useful where the equipment does not provide the traditional positive and negative RS-232 supply rails.

The MAX232CEAWE+ uses a single +5V supply, combining two transmit channels and two receive channels in one package. This integration reduces the number of components required for a bidirectional RS-232 port. Its stated interface compatibility includes EIA/TIA-232E, V.28, and V.24 systems, while its 16-SOIC format supports conventional surface-mount PCB assembly. The E designation identifies an industrial-temperature device within the MAX232 family.

Operationally, the transmitter portion converts TTL or CMOS logic levels into RS-232-compatible signal levels, while the receiver portion converts incoming RS-232 signals into logic-compatible outputs. The MAX232 family is intended specifically for communications interfaces where positive and negative supply voltages are unavailable. Its internal charge-pump approach allows +5V-powered equipment to implement RS-232 links without external negative-rail generation circuitry.

Typical applications include industrial serial adapters, data-acquisition equipment, instrumentation, embedded controller interfaces, point-of-sale systems, and legacy peripheral connections. A two-driver, two-receiver arrangement is useful for consoles, debug ports, programmable instruments, and control systems that exchange data in both directions over separate RS-232 channels.

PCB design should prioritize short return paths and controlled return current around the interface. Place the device close to the connector and keep unprotected RS-232 traces away from sensitive analog or high-speed digital nets. The manufacturer's pin-description table should be used when assigning connector-side and logic-side signals, and external protection should be selected for the cable length and installation environment.

This product page combines the manufacturer interface description with package, application, and drop-in selection guidance. It also highlights where temperature-grade, ESD-protection, and footprint differences matter when comparing MAX232-family devices for an existing 16-SOIC PCB design.

Alternatives de remplacement direct pour MAX232CEAWE+ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec MAX232CEAWE+ (même facteur de forme et même empreinte) — différant par Interface Standard, Product Type, Package, Maximum Data Rate, Driver and Receiver Count.

Maxim Integrated
Interface Standard: EIA/TIA-232E and V.28/V.24
Product Type: RS-232 line-driver and receiver transceiver
Package: 16-pin SOIC
Comparer avec MAX232CEAWE+ →
Analog Devices
Interface Standard: RS-232
Package: 16-pin SOIC
Maximum Data Rate: 200 kb/s
Comparer avec MAX232CEAWE+ →
Analog Devices
Interface Standard: RS-232; EIA/TIA-232E and V.28/V.24 family application
Product Type: RS-232 line driver/receiver transceiver
Package: 16-pin wide SOIC
Comparer avec MAX232CEAWE+ →
Analog Devices
Interface Standard: EIA/TIA-232E and CCITT V.28
Product Type: Dual RS-232 transceiver with integrated charge pump
Package: 16-pin narrow SOIC
Comparer avec MAX232CEAWE+ →
Maxim Integrated
Product Type: RS-232 transceiver interface IC
Package: 16-pin wide SOIC
Maximum Data Rate: 120 kbps
Comparer avec MAX232CEAWE+ →

MAX232CWE+

✅ Remplacement direct
Analog Devices
📦 16-SOIC
RS-232 line driver/receiver transceiver · 4.5 V to 5.5 V · 2 · 2 · RS-232; EIA/TIA-232E and V.28/V.24 family application · Dual RS-232 transmitter · Dual RS-232 receiver · CMOS/TTL-compatible digital interface

Contactez-nous pour le prix

Voir la fiche technique →

MAX232EWE+T

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Maxim Integrated
📦 16-SOIC
RS-232 transceiver interface IC · 2 drivers · 2 receivers · 4.5 V to 5.5 V · 120 kbps · EIA/TIA-232E · CCITT V.28 and V.24 · +5 V

Contactez-nous pour le prix

Voir la fiche technique →

MAX232EESE+

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Analog Devices
📦 16-SOIC
Dual RS-232 transceiver with integrated charge pump · 2 · 2 · +5 V · 120 kbps · EIA/TIA-232E and CCITT V.28 · 15 kV · 16-pin narrow SOIC

Contactez-nous pour le prix

Voir la fiche technique →

MAX232AEWE+

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Analog Devices
📦 16-SOIC
2 drivers · 2 receivers · 2/2 full-duplex · RS-232 · +5 V · 200 kb/s · 16-pin SOIC · 7.50 mm

Contactez-nous pour le prix

Voir la fiche technique →

MAX232ACWE+

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Maxim Integrated
📦 16-SOIC
RS-232 line-driver and receiver transceiver · 2 transmitters / 2 receivers · +5 V · EIA/TIA-232E and V.28/V.24 · 16-pin SOIC · Surface mount

Contactez-nous pour le prix

Voir la fiche technique →

MAX232CEAWE+ Spécifications

Product Type 2/2 RS-232 transceiver
Number of Drivers 2
Number of Receivers 2
Tension d'alimentation +5 V
Interface Standard EIA/TIA-232E
Protocol Support V.28 and V.24
Boîtier 16-SOIC
Type de montage Surface mount
Configuration de sortie Full RS-232
Driver and Receiver Count 2 transmitters and 2 receivers
Supply Configuration Single +5 V supply

Guide de configuration des broches du MAX232CEAWE+ 16-soic

Configuration des broches du MAX232CEAWE+ (boîtier 16-soic). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 16-soic pour le MAX232CEAWE+

Aucune donnée de brochage détaillée disponible pour MAX232CEAWE+.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

MAX232CEAWE+ convient pour 6 applications: Industrial Serial Controllers, Data-Acquisition Instruments, Embedded Controller Service Ports, Point-of-Sale Terminals, Programmable Test Equipment, Legacy Peripheral Connectivity.

🏭

Industrial Serial Controllers

The MAX232CEAWE+ fits industrial controllers that expose an RS-232 service or configuration port while operating from a +5 V logic rail. Its 2/2 configuration provides two driver channels and two receiver channels in one 16-SOIC package, reducing the component count compared with separate single-channel interface devices. The MAX232 family targets EIA/TIA-232E, V.28, and V.24 communication requirements where positive and negative supply rails are unavailable. For industrial deployment, place the IC close to the connector, route return currents carefully, and select external surge protection according to the cable length and installation environment.

🔧

Data-Acquisition Instruments

The MAX232CEAWE+ is suitable for data-acquisition instruments that need a legacy serial console alongside a data channel. Two transmitters and two receivers in a 16-SOIC package allow bidirectional communication without adding separate RS-232 interface packages. Operating from +5 V is especially useful when the instrument already has a +5 V logic rail but cannot readily provide the traditional positive and negative RS-232 supply levels. Because the MAX232 family supports EIA/TIA-232E, V.28, and V.24, it fits many legacy test and measurement interfaces. Confirm data rate, receiver threshold, and connector-side protection against the final instrument specification.

🖥️

Embedded Controller Service Ports

The MAX232CEAWE+ can implement a service or debug port on an embedded controller board powered from +5 V. Its two-driver, two-receiver arrangement supports separate command and response paths, while the 16-SOIC package keeps the footprint compact for surface-mount assembly. The device's +5 V operating requirement avoids external negative-rail generation, and its EIA/TIA-232E, V.28, and V.24 support makes it appropriate for conventional controller peripherals. Place the transceiver near the serial connector, keep ground and signal returns together, and use the manufacturer pin table to assign logic-side and connector-side signals correctly.

📺

Point-of-Sale Terminals

The MAX232CEAWE+ is appropriate for point-of-sale and peripheral equipment that communicates with older RS-232 devices. Two transmit channels and two receive channels provide enough connectivity for a bidirectional peripheral link or paired control channels in a 16-SOIC package. Since the device runs from a single +5 V supply, it can simplify power planning in terminals built around +5 V logic. The MAX232 family's EIA/TIA-232E, V.28, and V.24 compatibility supports established serial-control applications. External protection remains important when the equipment uses long cables or exposed connectors, and firmware should configure the host UART to the selected channel's supported rate.

🔬

Programmable Test Equipment

The MAX232CEAWE+ is useful in programmable instruments that need a standardized serial control interface for calibration, logging, or remote commands. The integrated 2/2 transceiver architecture permits two driver and two receiver paths while retaining a conventional 16-SOIC surface-mount package. A single +5 V supply is compatible with many instrument logic rails and eliminates the need for a separate negative supply stage in the RS-232 interface. The MAX232 family's support for EIA/TIA-232E, V.28, and V.24 enables communication with legacy controllers and test fixtures. Verify the maximum supported data rate and timing margin for the chosen instrument processor before production.

🧩

Legacy Peripheral Connectivity

The MAX232CEAWE+ provides a practical bridge between modern +5 V control logic and legacy RS-232 peripherals. Its two transmitters and two receivers support separate communication paths in one 16-SOIC device, and its support for EIA/TIA-232E, V.28, and V.24 broadens compatibility with established serial equipment. The integrated interface is preferable to discrete driver and receiver networks when board space is constrained. Route the connector-side traces as a compact differential-free pair, maintain a continuous ground reference, and install suitable transient protection if the peripheral cable leaves the enclosure. Check receiver logic thresholds against the peripheral's output voltage.

What is the MAX232CEAWE+ used for?
The MAX232CEAWE+ is a +5V-powered, 2/2 RS-232 transceiver used to connect TTL or CMOS logic systems to EIA/TIA-232E, V.28, and V.24 serial interfaces. According to the Maxim Integrated datasheet, it integrates two line drivers and two line receivers in a 16-SOIC package, allowing a compact two-channel RS-232 port to be implemented without external negative-rail circuitry.
How many RS-232 channels does the MAX232CEAWE+ provide?
The MAX232CEAWE+ provides two transmit channels and two receive channels. The product is described as a 2/2 full RS-232 transceiver in a 16-SOIC package. This arrangement is useful for equipment that needs separate logic-to-RS-232 and RS-232-to-logic paths, such as dual serial ports, diagnostic channels, or equipment combining a control channel and a data channel.
Does the MAX232CEAWE+ need positive and negative power supplies?
No. The MAX232CEAWE+ operates from a single +5 V supply and generates the signal levels needed for RS-232 communication internally. The Maxim Integrated datasheet specifically identifies the MAX220 through MAX249 family for EIA/TIA-232E and V.28/V.24 interfaces where positive and negative supply rails, including the traditional ±12 V arrangement, are not available.
Where can I download the MAX232CEAWE+ datasheet PDF?
The MAX232CEAWE+ datasheet PDF is available through the product documentation link on this page. The linked document is the Maxim Integrated MAX232CWE-family datasheet, which covers the MAX232CEAWE+ and related devices. Use its pin-description table, electrical characteristics, and application information to verify logic connections, supply requirements, and package dimensions before releasing a PCB layout.
Where is the MAX232CEAWE+ pinout?
The MAX232CEAWE+ pin assignment is documented in the Maxim Integrated MAX232-family datasheet linked from this page. The device uses a 16-SOIC package, so the datasheet pin-description table must be used for the exact package variant and exposed-pad or no-pad configuration. Do not infer connector-side and logic-side connections from a generic MAX232 symbol without checking the ordering-code table.
What are the key specifications of MAX232CEAWE+ that engineers should know?
The principal MAX232CEAWE+ specifications are a single +5 V supply, two RS-232 drivers, two RS-232 receivers, and a 16-SOIC surface-mount package. The device targets EIA/TIA-232E, V.28, and V.24 communications interfaces. According to the Maxim Integrated datasheet, it is intended for systems where positive and negative supply rails are unavailable, which distinguishes it from discrete RS-232 interface designs.
MAX232CEAWE+ vs MAX232CWE+ - which is better for an industrial design?
The MAX232CWE+ is the lower-temperature commercial-temperature member, while the MAX232CEAWE+ is the E-grade member intended for wider industrial temperature operation. Both are +5V-powered, 2/2 RS-232 transceivers in a 16-SOIC package. For equipment operating outside the commercial range, choose the MAX232CEAWE+; for room-temperature equipment, confirm that the MAX232CWE+ temperature rating covers the enclosure's worst-case ambient and internal rise.
When should I choose MAX232CEAWE+ over MAX232EWE+T?
Choose the MAX232CEAWE+ when a design requires the MAX232 family's standard 2/2 RS-232 function, a +5 V supply, and a 16-SOIC footprint in an industrial-temperature application. Consider MAX232EWE+T when enhanced driver or receiver protection is important and its electrical characteristics meet the cable environment. Both remain in the same 16-SOIC family, but the E suffix and specific protection ratings should be compared in their datasheets.
Is the MAX232CEAWE+ suitable for industrial serial communication?
The MAX232CEAWE+ is suitable for industrial serial communication when its E-grade temperature range covers the equipment's worst-case conditions and the selected cable protection is adequate. It supports the +5V-powered, 2/2 RS-232 configuration required by many industrial controllers and instruments. The enclosure, connector selection, surge environment, and grounding scheme determine how much additional protection the board needs.
What is the best drop-in replacement for MAX232CEAWE+?
The closest same-footprint replacements include MAX232CWE+, MAX232EWE+T, MAX232AEWE+, and MAX232ACWE+, subject to temperature and protection requirements. Each uses the same 16-SOIC family and 2/2 +5V RS-232 architecture, but ordering suffixes identify meaningful commercial-temperature, industrial-temperature, or enhanced-ESD options. Verify the complete pin description and electrical tables before substitution.
Can MAX232EWE+T replace MAX232CEAWE+?
The MAX232EWE+T can replace the MAX232CEAWE+ when its electrical and environmental ratings satisfy the target design, because both use a 16-SOIC footprint and implement the same 2/2 +5V RS-232 function. The EWE+T option includes a tape-and-reel shipping format and enhanced protection characteristics, so compare ESD ratings, temperature limits, propagation behavior, and supply-current limits in the manufacturer datasheets before production use.
What can replace MAX232CEAWE+ without changing the PCB?
The MAX232CWE+, MAX232EWE+T, MAX232AEWE+, and MAX232ACWE+ are PCB-compatible 16-SOIC candidates for the MAX232CEAWE+ because they retain the same 2/2 RS-232 architecture and +5 V operating concept. A true drop-in decision still requires checking pin names, temperature grade, ESD capability, driver and receiver timing, and available package options. This list does not include devices that require a different footprint or interface arrangement.
Is MAX232CEAWE+ the same as MAX232CWE+?
The MAX232CEAWE+ and MAX232CWE+ share the same MAX232 2/2 RS-232 transceiver architecture, +5 V operation, and 16-SOIC package, but their ordering codes can denote different temperature or qualification classes. The MAX232CEAWE+ carries the E-grade designation for industrial-temperature use, whereas the MAX232CWE+ is associated with the commercial-temperature version. Confirm the relevant temperature range before treating them as interchangeable.
Where can I buy MAX232CEAWE+ and check its lead time?
Use the Request a Quote form on this page to request MAX232CEAWE+ availability, current lead time, and order quantity. The form is the appropriate channel for a quote-based sourcing decision without relying on stale catalog pricing. For production planning, specify the required package shipment format and operating-temperature grade so the quote and shipment configuration match the finished assembly.
Is MAX232CEAWE+ in stock?
Current MAX232CEAWE+ inventory should be requested through the Request a Quote form on this page. Stock status changes with order quantity, shipment packaging, and regional logistics, so a fixed availability statement would not represent the live position. Include the required quantity, target shipment format, and delivery schedule in the request to obtain an actionable supply response.

Données de référence d'ingénierie pour MAX232CEAWE+ — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the MAX232CEAWE+ when a 16-SOIC board requires a +5V-powered, 2/2 RS-232 interface and an industrial-temperature E-grade device. Its integrated drivers and receivers support EIA/TIA-232E, V.28, and V.24 communication while avoiding external negative-rail circuitry. Select MAX232CWE+ when commercial-temperature operation is sufficient and the lower operating limit meets the equipment specification. Consider MAX232EWE+T or MAX232EESE+ when enhanced E-series protection is desirable, and compare their exact ESD and timing ratings with the connected equipment. MAX232AEWE+ and MAX232ACWE+ remain usable 16-SOIC options when their protection class and ordering-grade differences meet the design. For every candidate, verify pin assignments, logic thresholds, data rate, supply current, temperature range, and connector-side protection before production release.

Comparaison avec les alternatives

Paramètre Ce produit MAX232CWE+ MAX232EWE+T MAX232EESE+ MAX232AEWE+ MAX232ACWE+
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Product Type 2/2 full RS-232 transceiver 2/2 full RS-232 transceiver 2/2 full RS-232 transceiver 2/2 full RS-232 transceiver 2/2 full RS-232 transceiver 2/2 full RS-232 transceiver
Driver and Receiver Count 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers
Supply Voltage +5 V +5 V +5 V +5 V +5 V +5 V
Temperature Grade E-grade industrial-temperature option Commercial-temperature option E-series option E-series option A-series option A-series option
Surface-Mount Form 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC

Principaux différenciateurs

  • E-grade temperature positioning (vs MAX232CWE+)
  • Full-duplex channel integration (vs MAX232AEWE+)
  • Single +5 V interface implementation (vs MAX232ACWE+)

Notes de conception

Place the MAX232CEAWE+ close to the RS-232 connector and place the connector-side protection components directly beside the connector. Keep logic-side traces away from unprotected RS-232 nets, and route the ground return continuously beneath or adjacent to the signal path. This arrangement reduces radiated coupling and helps the receiver maintain reliable behavior in industrial environments where external cables can pick up transient noise.

Do not treat every MAX232 suffix as electrically identical. The MAX232CEAWE+ is the E-grade 16-SOIC device, while MAX232CWE+, MAX232AEWE+, and MAX232ACWE+ represent different ordering classes. Before substituting a device, compare temperature limits, ESD withstand ratings, driver and receiver timing, supply current, and the exact pin-description table. A shared 16-SOIC footprint alone does not establish that a part is qualified for every operating environment.

Keep the RS-232 connector, driver outputs, and receiver inputs away from clocks, switching regulators, and high-current return paths. Use a compact ground reference for the interface and avoid routing the cable-side nets beneath unrelated digital activity. If the product includes surge or ESD protection, select its capacitance and clamp behavior carefully so it does not degrade receiver thresholds or the intended communication rate.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The MAX232 is an industrial interface IC rather than an automotive-qualified device, so AEC-Q100 is not applicable. RoHS, REACH, lead-free, and halogen-free status require confirmation from the relevant manufacturer product documentation for the exact ordering code.

Données vérifiées le : 2026-11-18 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

MAX232CEAWE+ datasheet MAX232CEAWE+ pinout MAX232CEAWE+ datasheet pdf MAX232CEAWE+ equivalent MAX232CEAWE+ replacement MAX232CEAWE+ cross reference MAX232CEAWE+ vs MAX232CWE+ MAX232CEAWE+ price MAX232CEAWE+ stock Analog Devices MAX232CEAWE+ MAX232 16-SOIC RS-232 transceiver MAX232CEAWE+ industrial serial interface MAX232CEAWE+ schematic MAX232CEAWE+ footprint

Composants & termes associés

Analog Devices Maxim Integrated MAX232CEAWE+ MAX232CWE+ MAX232EWE+T MAX232EESE+ MAX232AEWE+ MAX232ACWE+ RS-232 transceiver interface IC line driver line receiver EIA/TIA-232E V.28 V.24 16-SOIC SOIC family surface-mount device +5 V power supply industrial serial communication data acquisition legacy peripheral connectivity ESD protection TTL logic CMOS logic
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ