MAX3160EAP+ - 3.0-5.5V Multiprotocol Transceiver | Analog Devices
Référence : MAX3160EAP+ ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $11.98 | $11,98 |
| 10 | $10.78 | $107,80 |
| 100 | $8.58 | $858,00 |
| 500 | $6.88 | $3 440,00 |
| 1 000 | $5.98 | $5 980,00 |
MAX3160EAP+ Présentation
Alternatives de remplacement direct pour MAX3160EAP+ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MAX3160CAP-T
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MAX3160EAP
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MAX3160E
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MAX3160EAP+ Spécifications
| Supply Voltage Range | 3.0 V to 5.5 V |
| Supported Protocols | RS-232, RS-422, RS-485 |
| Programmable Configuration | 2TX/2RX RS-232 or single RS-485/RS-422 transceiver |
| Operating Current | 1 uA |
| Maximum Data Rate | 250 kbps |
| Transmitter Slew Rate | Pin selectable for RS-232 and RS-485/422 modes |
| Number of Transmitters | 2 in RS-232 configuration |
| Number of Receivers | 2 in RS-232 configuration |
| Boîtier | 20-pin SSOP |
| Type de montage | Surface mount |
| Product Type | Multiprotocol line transceiver |
| RS-485/RS-422 Mode | Single half/full-duplex transceiver |
| Plage de température de fonctionnement | -40C to +85C |
Guide de configuration des broches du MAX3160EAP+ 20-pin ssop
Configuration des broches du MAX3160EAP+ (boîtier 20-pin ssop). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour MAX3160EAP+.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MAX3160EAP+ convient pour 6 applications: Industrial Control Interfaces, Point-of-Sale Equipment, Interface Converters, Networking Peripherals, Security Systems, Portable Data Acquisition.
Industrial Control Interfaces
The MAX3160EAP+ fits industrial control equipment that must connect a controller to RS-232, RS-422, or RS-485 field devices. Its 3.0V to 5.5V supply range supports common embedded rails, while the pin-programmable configuration lets one transceiver serve both legacy RS-232 ports and balanced links. For RS-485 or RS-422 operation, add the required termination and biasing network, and use the manufacturer’s programming table to configure the drivers and receivers. The same IC can help simplify inventory when a product family supports several serial standards.
Recommandé
Point-of-Sale Equipment
Point-of-sale terminals commonly need reliable serial connectivity to printers, scanners, displays, and other peripherals. The MAX3160EAP+ provides RS-232 capability in a 2TX/2RX arrangement and can support RS-422 or RS-485 when the product configuration requires a balanced link. Its 20-SSOP package helps reduce board area, and the family’s low-power positioning is useful in compact or battery-assisted terminals. Connector protection and cable routing remain important because external cables are susceptible to ESD and ground-potential problems.
Recommandé
Interface Converters
The MAX3160EAP+ is suitable for interface-converter products that translate or bridge serial communications in industrial and embedded systems. Pin programmability allows the converter to support either two RS-232 transmit and receive channels or a single RS-485/RS-422 balanced transceiver, depending on the product configuration. The 3.0V to 5.5V range allows use with both 3.3V and 5V logic systems after checking level compatibility. A practical converter should include termination, biasing, surge protection, and clearly defined fail-safe behavior for each supported protocol.
Recommandé
Networking Peripherals
Networking peripherals can use the MAX3160EAP+ when a product needs both RS-232 management access and RS-485/RS-422 communication in a small board area. The device supports a 3.0V to 5.5V operating range and a data rate up to 250 kbps, matching many low- and moderate-speed control links. The selectable transmitter slew rate helps control edge-rate energy and can reduce EMI, although proper termination and cable topology remain mandatory. Designers should select the protocol and termination strategy before finalizing the PCB footprint.
Recommandé
Security Systems
Security systems often combine RS-485 or RS-422 cameras, access-control panels, and configuration ports with service interfaces based on RS-232. The MAX3160EAP+ can be configured for the required balanced transceiver or 2TX/2TX RS-232 arrangement in the same serial-interface subsystem. Its compact 20-SSOP package and low-power feature are helpful when the controller board must support several communications standards without adding multiple interface ICs. External cable protection, surge suppression, grounding, and proper termination should be engineered for the installation environment.
Recommandé
Portable Data Acquisition
Portable data-acquisition equipment can benefit from the MAX3160EAP+ when it must connect to RS-232 test equipment and RS-485 sensors over the same compact controller platform. The 3.0V to 5.5V range supports common embedded supply rails, while the MAX3160 family’s 1 uA feature is relevant to power-conscious designs. Actual system current depends on protocol, enabled channels, supply voltage, and load, so engineers should use the electrical-characteristics table for battery-life calculations. Cable length and grounding can strongly affect noise immunity and transmission reliability.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MAX3160EAP+ — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MAX3160CAP-T | MAX3160EAP | MAX3160E |
|---|---|---|---|---|
| Supply Voltage | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V |
| Supported Protocols | RS-232, RS-422, RS-485 | RS-232, RS-422, RS-485 | RS-232, RS-422, RS-485 | RS-232, RS-422, RS-485 |
| Programmable Architecture | 2TX/2RX RS-232 or single RS-485/RS-422 transceiver | MAX3160-family multiprotocol configuration | MAX3160-family multiprotocol configuration | MAX3160E-family multiprotocol configuration |
| Transmitter Slew Rate | Pin selectable | MAX3160-family feature | Pin selectable | MAX3160E-family feature |
| Package | 20-pin SSOP | 20-pin SSOP family variant | 20-pin SSOP | SSOP family variant |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
Principaux différenciateurs
- One IC supports three serial standards (vs MAX3160CAP-T)
- RS-232 and balanced-interface flexibility (vs MAX3160EAP)
- Selectable edge-rate control (vs MAX3160E)
Notes de conception
Do not assume that every MAX3160 suffix is pin-compatible. The supplied cross-reference data identifies MAX3160CAP-T as a different package variant, and the MAX3160EAP+ listing specifically identifies a 20-SSOP package. Before placing a replacement on an existing board, compare the manufacturer package drawing, pin numbers, programming inputs, enable polarity, and exposed-pin assignments. A shared product family is not sufficient evidence of a drop-in replacement.
For RS-485 or RS-422 links, place termination and any required biasing components according to the system topology and keep the protected transceiver close to the connector. The MAX3160 family’s pin-selectable slew rate can reduce edge-rate energy and reflections, but it does not correct an incorrect cable length, missing termination, or poor grounding. Validate signal integrity with the intended baud rate, cable type, topology, and external protection components.
Route the serial lines as a controlled-impedance or tightly coupled interface where appropriate, and keep the transceiver, termination, protection, and connector path electrically short. Provide local supply bypassing close to the MAX3160EAP+ and maintain a clean return path for the interface ground. Because the same device can be programmed for unbalanced and balanced modes, document the strap state and termination population clearly so manufacturing cannot populate the wrong network.
Informations de conformité
The supplied verified results identify the MAX3160EAP+ as an active production part and list Analog Devices/Maxim Integrated distributor pages, but they do not provide verified RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 statements. Compliance fields therefore remain unknown.
