MAX3160EAP+ - 3.0-5.5V Multiprotocol Transceiver | Analog Devices
부품 번호: MAX3160EAP+ ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $11.98 | $11.98 |
| 10 | $10.78 | $107.80 |
| 100 | $8.58 | $858.00 |
| 500 | $6.88 | $3,440.00 |
| 1,000 | $5.98 | $5,980.00 |
MAX3160EAP+ 개요
드롭인 대체품: MAX3160EAP+ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MAX3160CAP-T
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX3160EAP
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX3160E
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX3160EAP+ 사양
| Supply Voltage Range | 3.0 V to 5.5 V |
| Supported Protocols | RS-232, RS-422, RS-485 |
| Programmable Configuration | 2TX/2RX RS-232 or single RS-485/RS-422 transceiver |
| Operating Current | 1 uA |
| Maximum Data Rate | 250 kbps |
| Transmitter Slew Rate | Pin selectable for RS-232 and RS-485/422 modes |
| Number of Transmitters | 2 in RS-232 configuration |
| Number of Receivers | 2 in RS-232 configuration |
| 패키지 | 20-pin SSOP |
| 실장 유형 | Surface mount |
| Product Type | Multiprotocol line transceiver |
| RS-485/RS-422 Mode | Single half/full-duplex transceiver |
| 동작 온도 범위 | -40C to +85C |
MAX3160EAP+ 20-pin ssop 핀 구성 가이드
MAX3160EAP+(20-pin ssop 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: MAX3160EAP+.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MAX3160EAP+ 적합 용도: 6 애플리케이션s: Industrial Control Interfaces, Point-of-Sale Equipment, Interface Converters, Networking Peripherals, Security Systems, Portable Data Acquisition.
Industrial Control Interfaces
The MAX3160EAP+ fits industrial control equipment that must connect a controller to RS-232, RS-422, or RS-485 field devices. Its 3.0V to 5.5V supply range supports common embedded rails, while the pin-programmable configuration lets one transceiver serve both legacy RS-232 ports and balanced links. For RS-485 or RS-422 operation, add the required termination and biasing network, and use the manufacturer’s programming table to configure the drivers and receivers. The same IC can help simplify inventory when a product family supports several serial standards.
추천
Point-of-Sale Equipment
Point-of-sale terminals commonly need reliable serial connectivity to printers, scanners, displays, and other peripherals. The MAX3160EAP+ provides RS-232 capability in a 2TX/2RX arrangement and can support RS-422 or RS-485 when the product configuration requires a balanced link. Its 20-SSOP package helps reduce board area, and the family’s low-power positioning is useful in compact or battery-assisted terminals. Connector protection and cable routing remain important because external cables are susceptible to ESD and ground-potential problems.
추천
Interface Converters
The MAX3160EAP+ is suitable for interface-converter products that translate or bridge serial communications in industrial and embedded systems. Pin programmability allows the converter to support either two RS-232 transmit and receive channels or a single RS-485/RS-422 balanced transceiver, depending on the product configuration. The 3.0V to 5.5V range allows use with both 3.3V and 5V logic systems after checking level compatibility. A practical converter should include termination, biasing, surge protection, and clearly defined fail-safe behavior for each supported protocol.
추천
Networking Peripherals
Networking peripherals can use the MAX3160EAP+ when a product needs both RS-232 management access and RS-485/RS-422 communication in a small board area. The device supports a 3.0V to 5.5V operating range and a data rate up to 250 kbps, matching many low- and moderate-speed control links. The selectable transmitter slew rate helps control edge-rate energy and can reduce EMI, although proper termination and cable topology remain mandatory. Designers should select the protocol and termination strategy before finalizing the PCB footprint.
추천
Security Systems
Security systems often combine RS-485 or RS-422 cameras, access-control panels, and configuration ports with service interfaces based on RS-232. The MAX3160EAP+ can be configured for the required balanced transceiver or 2TX/2TX RS-232 arrangement in the same serial-interface subsystem. Its compact 20-SSOP package and low-power feature are helpful when the controller board must support several communications standards without adding multiple interface ICs. External cable protection, surge suppression, grounding, and proper termination should be engineered for the installation environment.
추천
Portable Data Acquisition
Portable data-acquisition equipment can benefit from the MAX3160EAP+ when it must connect to RS-232 test equipment and RS-485 sensors over the same compact controller platform. The 3.0V to 5.5V range supports common embedded supply rails, while the MAX3160 family’s 1 uA feature is relevant to power-conscious designs. Actual system current depends on protocol, enabled channels, supply voltage, and load, so engineers should use the electrical-characteristics table for battery-life calculations. Cable length and grounding can strongly affect noise immunity and transmission reliability.
추천
추천 제품 요약
엔지니어링 참조 데이터: MAX3160EAP+ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MAX3160CAP-T | MAX3160EAP | MAX3160E |
|---|---|---|---|---|
| Supply Voltage | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V |
| Supported Protocols | RS-232, RS-422, RS-485 | RS-232, RS-422, RS-485 | RS-232, RS-422, RS-485 | RS-232, RS-422, RS-485 |
| Programmable Architecture | 2TX/2RX RS-232 or single RS-485/RS-422 transceiver | MAX3160-family multiprotocol configuration | MAX3160-family multiprotocol configuration | MAX3160E-family multiprotocol configuration |
| Transmitter Slew Rate | Pin selectable | MAX3160-family feature | Pin selectable | MAX3160E-family feature |
| Package | 20-pin SSOP | 20-pin SSOP family variant | 20-pin SSOP | SSOP family variant |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
주요 차별점
- One IC supports three serial standards (vs MAX3160CAP-T)
- RS-232 and balanced-interface flexibility (vs MAX3160EAP)
- Selectable edge-rate control (vs MAX3160E)
설계 노트
Do not assume that every MAX3160 suffix is pin-compatible. The supplied cross-reference data identifies MAX3160CAP-T as a different package variant, and the MAX3160EAP+ listing specifically identifies a 20-SSOP package. Before placing a replacement on an existing board, compare the manufacturer package drawing, pin numbers, programming inputs, enable polarity, and exposed-pin assignments. A shared product family is not sufficient evidence of a drop-in replacement.
For RS-485 or RS-422 links, place termination and any required biasing components according to the system topology and keep the protected transceiver close to the connector. The MAX3160 family’s pin-selectable slew rate can reduce edge-rate energy and reflections, but it does not correct an incorrect cable length, missing termination, or poor grounding. Validate signal integrity with the intended baud rate, cable type, topology, and external protection components.
Route the serial lines as a controlled-impedance or tightly coupled interface where appropriate, and keep the transceiver, termination, protection, and connector path electrically short. Provide local supply bypassing close to the MAX3160EAP+ and maintain a clean return path for the interface ground. Because the same device can be programmed for unbalanced and balanced modes, document the strap state and termination population clearly so manufacturing cannot populate the wrong network.
규정 준수 정보
The supplied verified results identify the MAX3160EAP+ as an active production part and list Analog Devices/Maxim Integrated distributor pages, but they do not provide verified RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 statements. Compliance fields therefore remain unknown.
