Texas Instruments

MAX3221CPWRE4 - 250kbps RS-232 Transceiver | Texas Instruments

Référence : MAX3221CPWRE4 ✓ Actif
3 V to 5.5 V Vdss 1 µA typical Id 16-pin TSSOP Package
MOQ : 1 |

MAX3221CPWRE4 Présentation

The Texas Instruments MAX3221CPWRE4 is a single-channel RS-232 line driver and receiver with a dual charge-pump circuit, a 3 V to 5.5 V supply range, operation up to 250 kbit/s, and ±15 kV ESD protection on the serial-port connection pins. It is packaged in a 16-pin TSSOP and includes a receiver with a dedicated enable input. The device provides the electrical interface between TTL-compatible logic and an RS-232 port while requiring external charge-pump capacitors of 0.1 µF.

An RS-232 transceiver is an interface IC that converts low-voltage digital logic levels into the positive and negative voltage swings used by RS-232 equipment. In the broader semiconductor hierarchy, the MAX3221 belongs to the interface IC family, where line drivers and line receivers bridge computer, industrial-control, instrumentation, and communications equipment. Its single-channel architecture is useful when a system needs one bidirectional RS-232 connection rather than the multiple channels found on multi-channel transceiver families.

The MAX3221 operates from 3 V to 5.5 V and accepts 5 V logic input when operated from a 3.3 V supply. Its 250 kbit/s data rate supports legacy serial-port, point-to-point control, and embedded equipment links. Pin-to-pin ESD protection of ±15 kV applies to the RS-232 connection pins, including ground, helping protect the interface against electrostatic discharge encountered during installation or handling.

Internally, the device combines one line driver, one line receiver with a dedicated enable input, and a dual charge-pump circuit. The charge pumps generate the positive and negative voltages required for compliant RS-232 signaling. The receiver enable function allows a system to place the receive side in a controlled state, while the low standby current supports power-conscious designs where the interface must remain present without continuously receiving data.

Typical uses include single-port RS-232 equipment interfaces, industrial controller serial links, programmable-instrument connections, and embedded systems that communicate with legacy peripherals. Because the logic side operates from 3 V to 5.5 V, the device can be used in both 3.3 V and 5 V systems. The 16-pin TSSOP also supports compact board layouts where a larger multi-channel transceiver would be unnecessary.

Designers should place the 0.1 µF charge-pump capacitors close to their designated pins and observe the connector-side voltage and polarity requirements of RS-232. The interface does not create isolation, so an exposed or long cable run may require additional surge and ground-management measures. Input and output logic levels must also be checked against the connected controller rather than assumed from the serial-port standard.

This page organizes the technical specifications, source links, interface applications, drop-in alternatives, and PCB considerations for engineers evaluating the MAX3221CPWRE4. It also distinguishes exact electrical matches from variants that change package details or feature sets, helping prevent a nominal substitution from creating an unintended PCB or firmware incompatibility.

Alternatives de remplacement direct pour MAX3221CPWRE4 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

MAX3221IPWR

✅ Remplacement direct
Texas Instruments
📦 TSSOP-16
Single-channel RS-232 line driver/receiver · 1 driver · 1 receiver with dedicated enable pin · 3 V to 5.5 V · 250 kbps · ±15 kV on serial-port connection pins · TIA/EIA-232-F · Dual charge-pump circuit

Contactez-nous pour le prix

Voir la fiche technique →

MAX3221ECPWRE4

✅ Remplacement direct
📦 TSSOP-16
The E-prefix ordering variant differs from the target while retaining the MAX3221 single-channel, 3 V to 5.5 V, 250 kbit/s interface function; the exact feature or qualification difference is not numerically stated in the comparison result.

📋 Alternative de référence (hors catalogue)

MAX3221CPWRE4 Spécifications

Device Type Single-channel RS-232 line driver/receiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbit/s
Line Drivers 1
Line Receivers 1 with dedicated enable pin
Charge-Pump Architecture Dual charge-pump circuit
External Charge-Pump Capacitors 0.1 µF
ESD Protection ±15 kV pin-to-pin on serial-port connection pins, including GND
RS-232 Compliance TIA/EIA-232-F
ITU Recommendation ITU V.28
Low Standby Current 1 µA typical
Logic Input Compatibility Accepts 5 V logic input with 3.3 V supply
Boîtier 16-pin TSSOP
Type de montage Surface mount

Configuration des broches de MAX3221CPWRE4

TSSOP-16 Package Pinout Diagram TSSOP-16 4.4x5mm, P0.65mm, JEDEC MO-153. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 TSSOP-16
Broche 1 C1+ — Charge-pump capacitor 1 positive terminal
Broche 2 C1- — Charge-pump capacitor 1 negative terminal
Broche 3 C2+ — Charge-pump capacitor 2 positive terminal
Broche 4 C2- — Charge-pump capacitor 2 negative terminal
Broche 5 T1OUT — Transmitter 1 output
Broche 6 R1IN — Receiver 1 input
Broche 7 R1OUT — Receiver 1 output
Broche 8 R2OUT — Receiver 2 output
Broche 9 T2IN — Transmitter 2 input
Broche 10 T2OUT — Transmitter 2 output
Broche 11 V- — Negative charge-pump output
Broche 12 R2IN — Receiver 2 input
Broche 13 VCC — Positive supply voltage
Broche 14 GND — Ground
Broche 15 EN — Receiver enable input
Broche 16 T1IN — Transmitter 1 input

Applications typiques

MAX3221CPWRE4 convient pour 6 applications: Legacy RS-232 Equipment Interface, Industrial Controller Serial Link, Programmable Instrumentation Communication, Embedded System RS-232 Port, RS-232 Service and Configuration Port, Data Acquisition and Control Module.

🖥️

Legacy RS-232 Equipment Interface

The MAX3221CPWRE4 fits a point-to-point connection to legacy RS-232 equipment because it combines one line driver, one line receiver, and a dual charge-pump circuit in a compact 16-pin TSSOP. Its 250 kbit/s maximum data rate covers conventional serial-port control and diagnostic links. The 3 V to 5.5 V operating range also permits use with both 3.3 V and 5 V control logic. Designers should use the receiver-enable function when the host needs a controlled receive state and should verify the exact operating-temperature grade before using the part in industrial equipment.

🏭

Industrial Controller Serial Link

A MAX3221CPWRE4 can provide the electrical interface between an industrial controller and a single RS-232 peripheral or service port. Its ±15 kV pin-to-pin ESD protection on the serial-port connection pins adds useful defense for connector-facing circuitry, while the dual charge-pump circuit develops the required RS-232 voltage levels internally. The single-channel format reduces board area compared with a multi-channel transceiver. For installed industrial equipment, verify the exact temperature grade, implement appropriate cable grounding, and determine whether galvanic isolation or additional surge protection is required.

🔧

Programmable Instrumentation Communication

The MAX3221CPWRE4 is suitable for connecting a controller to programmable test and measurement equipment that retains an RS-232 communication port. A 250 kbit/s interface rate is appropriate for command and measurement-data transfers that do not require modern high-speed serial protocols, while the 3 V to 5.5 V supply range simplifies operation across mixed-voltage control systems. Place the two 0.1 µF charge-pump capacitors close to the device and route connector-side signals away from sensitive logic to minimize coupling.

🧩

Embedded System RS-232 Port

An embedded controller can use the MAX3221CPWRE4 to add one full-duplex-style RS-232 port without implementing a discrete driver, receiver, and charge-pump network. Logic-side operation from 3 V to 5.5 V supports common embedded supply choices, and 5 V logic inputs remain acceptable with a 3.3 V supply. The dedicated receiver-enable input can assist with interface-state management. Firmware and signal timing must still follow the connected device's RS-232 protocol, and the 250 kbit/s limit should be checked against the required payload rate.

📡

RS-232 Service and Configuration Port

The MAX3221CPWRE4 can implement a compact service, configuration, or maintenance connector on industrial and communications equipment. A single driver and receiver are sufficient for a service port, and the 16-pin TSSOP package keeps the interface compact. Its 250 kbit/s maximum data rate supports typical command menus and diagnostic transfers. The connector-facing ±15 kV ESD protection helps with exposed interfaces, but it does not eliminate the need for suitable cable design, chassis grounding, or an isolated protection network in severe industrial environments.

📺

Data Acquisition and Control Module

The MAX3221CPWRE4 can connect a compact data-acquisition or control module to an RS-232 host for commands, status reporting, and sampled data transfer. The single-channel architecture matches systems with one external serial port, while 250 kbit/s operation is suitable for moderate legacy data rates. Its 3 V to 5.5 V supply range permits common 3.3 V logic systems, and the receiver-enable input gives the host interface additional state control. Validate throughput, framing, and flow-control timing against the acquisition protocol before production deployment.

Récapitulatif des produits recommandés

MAX3221CPWR Same MAX3221 interface family and 16-pin TSSOP ordering option Utilisé dans : Legacy RS-232 Equipment Interface, Programmable Instrumentation Communication, Embedded System RS-232 Port, Data Acquisition and Control Module MAX3221IPWR Texas Instruments Utilisé dans : Legacy RS-232 Equipment Interface, Industrial Controller Serial Link, Programmable Instrumentation Communication, RS-232 Service and Configuration Port MAX3221ECPWRE4 Related MAX3221 ordering variant for evaluation in the same TSSOP footprint Utilisé dans : Industrial Controller Serial Link, RS-232 Service and Configuration Port MAX3232CPWR Texas Instruments Utilisé dans : Embedded System RS-232 Port, Data Acquisition and Control Module
What is the MAX3221CPWRE4?
The MAX3221CPWRE4 is a single-channel RS-232 line driver and receiver from Texas Instruments. It combines one driver, one receiver with a dedicated enable input, and a dual charge-pump circuit in a 16-pin TSSOP. According to the manufacturer product page, the device supports a 3 V to 5.5 V supply, operation up to 250 kbit/s, and ±15 kV pin-to-pin ESD protection on the serial-port connection pins.
What is the operating voltage of the MAX3221CPWRE4?
The MAX3221CPWRE4 operates from 3 V to 5.5 V. The interface can therefore be powered from a 3.3 V or 5 V system and accepts 5 V logic input when its supply is 3.3 V, as stated by the MAX3221 technical documentation. The dual internal charge-pump circuit supplies the positive and negative voltages required by the RS-232 connector side.
What is the maximum data rate of MAX3221CPWRE4?
The MAX3221CPWRE4 operates up to 250 kbit/s. The manufacturer describes the MAX3221 as a 3 V to 5.5 V, single-channel RS-232 line driver and receiver with a 250 kbit/s data rate. This makes it appropriate for legacy RS-232 equipment links and point-to-point embedded or instrumentation connections rather than high-speed differential data buses.
What is the MAX3221CPWRE4 pinout?
The MAX3221CPWRE4 uses a 16-pin TSSOP arrangement containing the driver input and output, receiver input and output, receiver enable, supply, ground, charge-pump capacitor nodes, and generated supply rails. Use the pin-description table and package drawing in the manufacturer datasheet when assigning PCB tracks; connector-side RS-232 pins and logic-side pins must not be interchanged.
Where can I download the MAX3221CPWRE4 datasheet PDF?
The official MAX3221 datasheet and ordering information are available from the Texas Instruments MAX3221 product page at https://www.ti.com/product/MAX3221. That page links to the manufacturer documentation and identifies the 3 V to 5.5 V supply range, 250 kbit/s operation, and ±15 kV ESD protection. Use the manufacturer PDF for authoritative pin names, limits, and ordering information.
What external capacitors does the MAX3221CPWRE4 require?
The MAX3221CPWRE4 requires external 0.1 µF charge-pump capacitors. These capacitors are connected to the capacitor terminals identified in the manufacturer pin-description table and allow the internal dual charge-pump circuit to generate the required RS-232 voltage rails. Place each capacitor close to its associated device pins and minimize loop area to reduce propagation paths and board-level noise coupling.
What does ±15 kV ESD protection mean for the MAX3221CPWRE4?
The ±15 kV rating means the serial-port connection pins, including ground, are specified for pin-to-pin electrostatic-discharge protection of up to ±15 kV under the applicable test conditions. According to the MAX3221 manufacturer documentation, this protection strengthens the connector-facing interface. It does not replace cable surge protection, isolation, or proper grounding for long or industrial cable runs.
Where can I buy MAX3221CPWRE4 and check its price?
Use the Request a Quote form on this page to request MAX3221CPWRE4 pricing, current availability, and lead time. The structured price table on this page represents quote-based purchasing, so no static unit amount should be inferred from the product specification. The exact MAX3221CPWRE4 ordering code should be stated on the request to avoid confusion with other MAX3221 package or grade options.
What is the lead time for MAX3221CPWRE4?
Current lead time and minimum order quantity for MAX3221CPWRE4 should be confirmed through the Request a Quote form on this page. Lead time can change with manufacturer inventory, the exact ordering suffix, and order quantity. Specify the required quantity and packaging format in the request so the quote can be matched to the intended 16-pin TSSOP production design.
Is MAX3221CPWRE4 in stock?
Use the Request a Quote form on this page to check current MAX3221CPWRE4 stock and delivery status. The device is listed by the manufacturer as an active MAX3221-family product, but live inventory is transactional and should not be represented by a permanent in-stock claim. Include your order quantity and required delivery date in the quote request.
What is the best drop-in replacement for MAX3221CPWRE4?
The closest documented same-footprint replacement is the MAX3221 family variant with matching electrical functions and a 16-pin TSSOP package, but suffix and temperature-grade differences must be checked before substitution. The cross-reference search identifies MAX3221IPWR as a related alternative. Confirm pin names, temperature limits, marking, and lifecycle status against the manufacturer datasheet before treating it as a drop-in replacement.
Can MAX3221IPWR replace MAX3221CPWRE4?
MAX3221IPWR is a closely related MAX3221-family option in the same TSSOP format and should be evaluated as a possible second source. Its role as a direct replacement depends on the exact temperature, marking, and ordering suffix rather than the package alone. Compare the manufacturer ordering table, pin configuration, and electrical limits before changing the approved part number.
When should I choose MAX3221CPWRE4 over MAX3221IPWR?
Choose MAX3221CPWRE4 when its exact ordering suffix matches the production BOM and required environmental grade. Consider MAX3221IPWR when it satisfies the same electrical, package, temperature, and qualification requirements and offers a desirable supply-chain alternative. The choice should be based on verified ordering information rather than the CPW and IP suffix letters alone, because suffix meanings are not obvious without the manufacturer ordering table.
Is MAX3221CPWRE4 suitable for industrial equipment?
The MAX3221CPWRE4 is suitable when the exact ordering suffix satisfies the required industrial temperature range, ESD level, and system qualification. Its documented features include a 3 V to 5.5 V supply, 250 kbit/s operation, and ±15 kV ESD protection on serial-port pins. Industrial suitability also depends on the enclosure, cable length, isolation strategy, and applicable equipment-level compliance requirements.
What are the key specifications of MAX3221CPWRE4 that engineers should know?
The key engineering specifications are a 3 V to 5.5 V supply, 250 kbit/s maximum signaling rate, one RS-232 driver, one enabled receiver, a dual charge-pump circuit, 0.1 µF external capacitors, and ±15 kV pin-to-pin ESD protection. The device is offered in a 16-pin TSSOP. These characteristics define its suitability for compact single-port RS-232 links.

Données de référence d'ingénierie pour MAX3221CPWRE4 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the MAX3221CPWRE4 when the system needs exactly one RS-232 channel, operates from a 3 V to 5.5 V rail, and requires a 16-pin TSSOP implementation with documented ±15 kV connector-side ESD protection. MAX3221IPWR is the closest related same-brand option to evaluate for alternate sourcing; use it only after confirming the exact temperature, qualification, marking, and ordering differences. MAX3221ECPWRE4 should be considered when its documented E-family characteristics satisfy the target environmental requirements, while the specific feature delta should be verified against the manufacturer ordering table. A multi-channel RS-232 transceiver is preferable when several ports are required, but it is not a direct functional substitute for a one-channel design. In every case, check the logic thresholds, receiver-enable behavior, charge-pump capacitor values, connector polarity, cable grounding, and PCB footprint before releasing a new production BOM.

Comparaison avec les alternatives

Paramètre Ce produit MAX3221IPWR MAX3221ECPWRE4
Package TSSOP-16 TSSOP-16 TSSOP-16
Brand Texas Instruments Texas Instruments Texas Instruments
Device Function Single-channel RS-232 driver/receiver Single-channel RS-232 driver/receiver Single-channel RS-232 driver/receiver
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V
Maximum Data Rate 250 kbit/s 250 kbit/s 250 kbit/s
ESD Protection ±15 kV pin-to-pin ±15 kV pin-to-pin ±15 kV pin-to-pin
External Charge-Pump Capacitors 0.1 µF 0.1 µF 0.1 µF
RS-232 Standard TIA/EIA-232-F and ITU V.28 TIA/EIA-232-F and ITU V.28 TIA/EIA-232-F and ITU V.28
Receiver Enable Dedicated enable pin Dedicated enable pin Dedicated enable pin

Principaux différenciateurs

  • Compact single-channel interface (vs MAX3221ECPWRE4)
  • Wide logic-side supply compatibility (vs MAX3221IPWR)
  • Connector-side electrostatic-discharge protection (vs MAX3221IPWR)

Notes de conception

Place the two 0.1 µF charge-pump capacitors close to the C1 and C2 terminals identified in the manufacturer pin-description table. Keep the capacitor loops compact and route them away from the RS-232 connector and switching-power circuits. Short charge-pump traces reduce radiated coupling and help the charge-pump circuitry maintain predictable operation near the documented 250 kbit/s data-rate limit.

Separate connector-side RS-232 nets from sensitive logic and analog traces. The driver output is intentionally a high-voltage RS-232 signal, so routing it beneath sensitive circuitry can increase coupling even when the connector is unpopulated. Use a suitable ground reference for the interface, maintain the recommended connector-side clearances, and check whether the system requires isolated logic rather than a direct device ground connection.

Do not infer that every MAX3221 suffix is electrically and thermally interchangeable. Before substituting a related ordering code, compare the manufacturer ordering table, exact temperature range, pin configuration, package dimensions, marking, qualification status, and lifecycle status. The receiver enable state and 3 V to 5.5 V supply operation should also be checked against the host firmware and power-sequencing requirements.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The manufacturer documentation confirms TIA/EIA-232-F and ITU V.28 operation. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status were not explicitly established by the cited source text and remain unknown.

Recherches associées

MAX3221CPWRE4 datasheet MAX3221CPWRE4 pinout MAX3221CPWRE4 datasheet pdf MAX3221CPWRE4 equivalent MAX3221CPWRE4 replacement MAX3221CPWRE4 cross reference MAX3221CPWRE4 vs MAX3221IPWR MAX3221CPWRE4 TSSOP-16 footprint MAX3221CPWRE4 250kbit/s MAX3221CPWRE4 3V 5.5V Texas Instruments MAX3221CPWRE4 MAX3221CPWRE4 price MAX3221CPWRE4 stock MAX3221CPWRE4 RS-232 application circuit

Composants & termes associés

Texas Instruments MAX3221CPWRE4 MAX3221IPWR MAX3221ECPWRE4 RS-232 TIA/EIA-232-F ITU V.28 line driver line receiver RS-232 transceiver interface IC semiconductor dual charge-pump circuit ±15 kV ESD protection 250 kbit/s 3 V to 5.5 V supply 0.1 µF charge-pump capacitor TSSOP-16 TSSOP package family surface-mount package RS-232 port industrial control programmable instrumentation embedded system receiver enable
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ