MAX3221ECPWG4 - 3V RS-232 Transceiver | Texas Instruments
Référence : MAX3221ECPWG4 ✗ Fin de vieMAX3221ECPWG4 Présentation
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received RS-232 signals back into logic levels. The MAX3221ECPWG4 belongs to the line-transceiver hierarchy within interface ICs. Its integrated charge-pump circuitry supports single-supply operation, while the driver and receiver provide the physical layer required to connect a host, controller, or embedded system to an RS-232 port.
The device operates across a 3 V to 5.5 V supply range and includes one line driver and one line receiver. According to the manufacturer description, its RS-232 pins provide protection of ±15 kV under the IEC human-body model, ±8 kV under the IEC 61000-4-2 contact-discharge test, and ±15 kV under the IEC 61000-4-2 air-gap-discharge test. These ratings are intended for protecting exposed serial-port connectors against electrostatic discharge.
The MAX3221ECPWG4 uses a 16-terminal gull-wing surface-mount package with a 0.65 mm terminal pitch. The package body is identified as 4.40 mm wide, and the manufacturer markets the device as a commercial-temperature-grade part. Its single-channel architecture makes it appropriate where only one transmit and one receive path is needed, avoiding the extra drivers, receivers, and package area associated with a multi-channel transceiver.
Typical uses include single-port RS-232 console connections, industrial equipment interfaces, point-of-sale terminals, data-acquisition equipment, and service or configuration ports. The 3 V to 5.5 V operating range allows the transceiver to share power with 3.3 V or 5 V system logic, reducing the need for a separate 5 V-only interface supply in many designs.
PCB design should preserve the manufacturer-recommended connection and bypass layout, place charge-pump capacitors close to their associated pins, and route the RS-232 driver outputs toward the connector. The communication lines should remain away from sensitive analog or high-speed digital traces where practical. Confirm every pin function and capacitor value against the manufacturer pin description and application schematic before releasing a layout.
This product page combines the MAX3221ECPWG4 electrical ratings, package characteristics, RS-232 application context, and qualified drop-in alternatives with practical PCB and protection guidance. It is structured to help engineers identify whether the single-channel 16-pin TSSOP device fits a connector, industrial-control, or embedded serial-interface design.
Alternatives de remplacement direct pour MAX3221ECPWG4 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MAX3221ECPWG4 (même facteur de forme et même empreinte) — différant par Number of Receivers, Product Type, Number of Drivers, Supply Voltage Range, Maximum Data Rate.
MAX3221ECPWR
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →MAX3221CPWRG4
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →MAX3221EIPW
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →SN65C3221EPWR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MAX3221ECPWG4 Spécifications
| Product Type | Single-channel RS-232 line driver/receiver |
| Number of Drivers | 1 |
| Number of Receivers | 1 |
| Supply Voltage Range | 3 V to 5.5 V |
| Communication Protocol | RS-232 |
| Transceiver Type | Line transceiver |
| ESD Protection, Human-Body Model | ±15 kV |
| ESD Protection, IEC 61000-4-2 Contact Discharge | ±8 kV |
| ESD Protection, IEC 61000-4-2 Air-Gap Discharge | ±15 kV |
| Package Type | 16-pin TSSOP |
| Package Width | 4.40 mm |
| Package Length | 0.173 inch (4.40 mm) |
| Terminal Pitch | 0.65 mm |
| Number of Terminals | 16 |
| Style de montage | Gull-wing surface mount |
| Temperature Grade | Commercial |
Guide de configuration des broches du MAX3221ECPWG4 0.173 inch (4.40 mm)
Configuration des broches du MAX3221ECPWG4 (boîtier 0.173 inch (4.40 mm)). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour MAX3221ECPWG4.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MAX3221ECPWG4 convient pour 6 applications: Single-Port RS-232 Console, Industrial Control Equipment, Point-of-Sale Terminal Interface, Data-Acquisition Equipment, Embedded Service and Configuration Port, Instrumentation and Measurement.
Single-Port RS-232 Console
The MAX3221ECPWG4 fits a single-port console or service interface because it provides one RS-232 driver and one receiver in a compact 16-pin TSSOP. Operating from 3 V to 5.5 V allows connection to 3.3 V or 5 V embedded systems without requiring a separate 5 V-only transceiver rail. Its enhanced IEC ESD ratings, including ±15 kV air-gap discharge, add useful connector-side protection for chassis-mounted equipment. Place the driver output and receiver input close to the protection network and connector, and follow the manufacturer charge-pump capacitor layout to maintain reliable operation.
Recommandé
Industrial Control Equipment
A single RS-232 channel can provide a simple configuration or diagnostics link for industrial controllers, test fixtures, and service equipment. The MAX3221ECPWG4 combines a 3 V to 5.5 V supply range with ±15 kV human-body-model and IEC air-gap ESD protection, making it suitable for exposed serial ports where static discharge is a concern. Its 16-pin TSSOP footprint limits board area while preserving the conventional RS-232 driver and receiver functions. Verify ambient-temperature requirements, grounding strategy, and connector-level surge protection for the installation environment.
Recommandé
Point-of-Sale Terminal Interface
The MAX3221ECPWG4 can provide the single full-duplex RS-232 link commonly used for a point-of-sale peripheral, scale, printer, or customer-display terminal. One driver and one receiver are sufficient when the equipment requires only one serial port. The 3.3 V compatibility is useful for compact systems based on modern embedded processors, while the 16-pin TSSOP package preserves board area for peripheral connectors and power circuitry. Route the connector-facing traces away from sensitive logic, and evaluate whether additional cable-side protection is required for long or exposed installations.
Recommandé
Data-Acquisition Equipment
The MAX3221ECPWG4 is suitable for a control or configuration channel in data-acquisition equipment that already uses RS-232 as its established command interface. Its single-supply operation across 3 V to 5.5 V simplifies interoperability with 3.3 V control logic, and the documented ESD ratings help protect a connector-facing interface in laboratory and industrial environments. Keep the transceiver separated from sensitive analog input stages, use the manufacturer-recommended ground and bypass arrangement, and confirm that the connected equipment uses compatible RS-232 signaling rather than RS-485 differential levels.
Recommandé
Embedded Service and Configuration Port
A built-in service port simplifies field diagnostics for embedded systems, and the MAX3221ECPWG4 provides the required one-driver, one-receiver RS-232 path in a 16-pin TSSOP. The device operates at 3 V to 5.5 V, enabling use with common embedded-controller supply levels, while enhanced ESD protection supports ports that may be connected by operators. Keep the exposed interface mechanically restrained and electrically referenced to the system ground. Review the exact pin names and charge-pump capacitor connections in the manufacturer datasheet before the PCB is released.
Recommandé
Instrumentation and Measurement
The MAX3221ECPWG4 can bridge a legacy RS-232 instrument to a modern acquisition controller when only one command channel is required. Its low-voltage supply range supports 3.3 V and 5 V systems, and the small 16-pin TSSOP package leaves more board area for analog or precision circuitry. ESD protection is particularly relevant where users attach external cables to measurement equipment. Use a disciplined grounding and shielding arrangement so connector protection does not substitute for correct common-mode, ground, and signal-return design.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MAX3221ECPWG4 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MAX3221ECPWR | MAX3221CPWRG4 | MAX3221EIPW | SN65C3221EPWR |
|---|---|---|---|---|---|
| Package | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Driver/Receiver Count | 1 driver / 1 receiver | 1 driver / 1 receiver | 1 driver / 1 receiver | 1 driver / 1 receiver | 1 driver / 1 receiver |
| Protocol | RS-232 | RS-232 | RS-232 | RS-232 | RS-232 |
Principaux différenciateurs
- Enhanced connector-side ESD ratings in the selected MAX3221E family (vs MAX3221CPWRG4)
- Commercial-temperature ordering option within the same MAX3221E family (vs MAX3221EIPW)
- Single-channel RS-232 implementation with one driver and one receiver (vs SN65C3221EPWR)
- 3 V to 5.5 V single-supply operation (vs MAX3221CPWRG4)
Notes de conception
Route the RS-232 driver and receiver paths directly toward the connector or protection network, and place the charge-pump capacitors close to their designated pins using the manufacturer application layout. Keep switching-capacitor and high-current charge-pump traces away from receiver inputs and sensitive analog circuitry. The 16-pin TSSOP has a 0.65 mm pitch, so inspect the land pattern and assembly drawing for solder bridging and stencil coverage.
Treat the RS-232 connector as an electrostatic-discharge and potentially noisy entry point. Connect the transceiver ground and interface ground according to the manufacturer reference circuit, and use the shortest practical return path. Do not rely on internal ESD protection as a substitute for a correctly designed cable shield, chassis bond, or external protection network when the port is exposed to long cables or severe industrial transients.
Do not infer interchangeability from package and protocol alone. The MAX3221ECPWG4, MAX3221ECPWR, MAX3221CPWRG4, MAX3221EIPW, and SN65C3221EPWR share a 16-pin TSSOP format, but suffixes can indicate family, temperature, lead-style, or packing differences. Compare every terminal, enable function, charge-pump connection, capacitor value, operating limit, and lifecycle status in the manufacturer documentation before changing the BOM.
Separate the RS-232 connector region from precision analog or high-speed digital sections of the board. Maintain the manufacturer's recommended component spacing around the transceiver, use a continuous ground reference, and minimize loop area around the driver and receiver paths. If the board also contains switching regulators, keep their high-current traces and inductors away from the receiver input and connector-side routing.
Informations de conformité
The manufacturer datasheet description identifies IEC 61000-4-2 ESD test levels, but separate RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals statements were not identified. The product is listed as lead-free in a distributor specification summary, but the complete status statement requires confirmation from the manufacturer compliance documentation.