Texas Instruments

MAX3221CPWRG4 - 250kbps RS-232 Transceiver | Texas Instruments

MPN: MAX3221CPWRG4 ✓ Active
3 V to 5.5 V Vdss 1 µA typical Id 16-pin TSSOP, 4.40 mm width Package
MOQ: 1 |

MAX3221CPWRG4 Overview

The Texas Instruments MAX3221CPWRG4 is a single-channel RS-232 line driver and receiver operating from a 3 V to 5.5 V supply at data rates up to 250 kbit/s. It provides one driver and one receiver in a 16-pin TSSOP package with a 4.40 mm body width. The device also includes ±15 kV electrostatic-discharge protection on its RS-232 interfaces.

A transceiver converts logic-level signals into RS-232-compatible differential voltage levels and converts received RS-232 levels back into CMOS-compatible logic. Within the broader communications hierarchy, this device is an RS-232 interface transceiver, a line-driver and receiver IC, and ultimately a signal-conditioning device for serial data links. It is intended for equipment-to-equipment and point-to-point serial communication rather than long-distance networking.

Key features include a 3 V to 5.5 V operating range, operation at up to 250 kbit/s, low standby current of 1 µA typical, and compatibility with 5 V logic inputs when operated from a 3.3 V supply. The MAX3221 design uses external 0.1 µF charge-pump capacitors, allowing the interface to generate the bipolar voltage required by RS-232 without a separate DC-DC converter. TI identifies the device as interoperable with equivalent single-channel interface transceivers.

The device conforms to TIA/EIA-232-F and ITU V.28 signaling requirements. Its transmitter provides the voltage swing required to drive a standard RS-232 receiver, while its receiver recognizes the negative-going voltage used for a valid RS-232 logic mark. The integrated ±15 kV ESD protection improves survivability when cables are connected or disconnected in industrial, instrumentation, and data-acquisition environments.

Typical uses include industrial control consoles, test and measurement equipment, instrumentation links, embedded serial ports, and service-port connections between a host and peripheral. Because the MAX3221 provides only one driver and one receiver, two transceivers are normally required for a full-duplex point-to-point link with transmit and receive data flowing simultaneously.

When laying out the circuit, place the 0.1 µF charge-pump capacitors close to their associated pins and route the RS-232 driver output and receiver input away from sensitive analog or high-speed digital traces. Confirm that the logic-side supply voltage matches the host interface, and verify the ground connection between both ends of the cable before relying on common-mode rejection.

This page combines the device ratings, package information, functional guidance, pin-level design considerations, and available drop-in alternatives to support faster component selection and PCB implementation.

Drop-in alternatives for MAX3221CPWRG4 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with MAX3221CPWRG4 (same form factor and footprint) — differing in ESD Protection, Package, Product Type, Logic Input Compatibility, Maximum Data Rate.

Texas Instruments
ESD Protection: ±15 kV pin-to-pin
Package: TSSOP-16
Product Type: Single-channel RS-232 line driver/receiver
Compare with MAX3221CPWRG4 →
Texas Instruments
Product Type: Single-channel RS-232 line driver/receiver
Compare with MAX3221CPWRG4 →
Analog Devices
ESD Protection: Enhanced ESD protection
Package: 16-SSOP
Product Type: RS-232 transceiver
Compare with MAX3221CPWRG4 →
Texas Instruments
ESD Protection: ±15 kV HBM
Package: 16-pin TSSOP
Logic Input Compatibility: Accepts 5 V logic input with 3.3 V supply
Compare with MAX3221CPWRG4 →

MAX3221ECPWRG4

✅ Drop-In
📦 16-pin TSSOP
Same MAX3221 3 V to 5.5 V single-channel RS-232 role and 16-pin TSSOP footprint; adds automatic power-down behavior, so functional control requirements must be confirmed.

📋 Reference alternative (not in catalog)

MAX3221IPWRG4

✅ Drop-In
Texas Instruments
📦 16-pin TSSOP
Single-channel RS-232 line driver/receiver · 3 V to 5.5 V · 250 kbps · 1 · 1 · Dedicated enable pin · ±15 kV HBM · 1 µA typical

Contact for price

View Datasheet →

MAX3221CPW

✅ Drop-In
Texas Instruments
📦 16-pin TSSOP
Single-channel RS-232 line driver/receiver · 3 V to 5.5 V · 250 kbit/s · ±15 kV pin-to-pin · 1 · 1 · Dedicated enable pin · Dual charge-pump circuit

Contact for price

View Datasheet →

MAX3221CPWRG4 Specifications

Product Type Single-channel RS-232 line driver and receiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbit/s
Number of Drivers 1
Number of Receivers 1
Driver and Receiver Configuration 1/1 full-duplex transceiver
ESD Protection ±15 kV
RS-232 Standard TIA/EIA-232-F
International Standard ITU V.28
Low Standby Current 1 µA typical
External Charge-Pump Capacitors 0.1 µF
Logic Input Compatibility Accepts 5 V logic input with a 3.3 V supply
Interchangeability Designed to be interchangeable with equivalent devices
Package 16-pin TSSOP, 4.40 mm width
Mounting Type Surface mount
RoHS Status RoHS compliant

MAX3221CPWRG4 16-pin tssop, 4.40 mm width Pin Configuration Guide

Pin configuration for MAX3221CPWRG4 (16-pin tssop, 4.40 mm width package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

16-pin tssop, 4.40 mm width package pinout diagram for MAX3221CPWRG4

No detailed pinout data available for MAX3221CPWRG4.

Refer to the datasheet for full pin configuration.

Typical Applications

MAX3221CPWRG4 is suitable for 6 applications: Embedded Serial Console, Industrial Test and Measurement Equipment, Point-to-Point Data Acquisition Link, Instrument Service and Configuration Port, Controller Communication Gateway, Portable Equipment Interface.

🔧

Embedded Serial Console

The MAX3221CPWRG4 suits an embedded controller that needs one legacy RS-232 port for configuration, diagnostics, or boot logging. Its 3 V to 5.5 V supply range allows operation directly from a 3.3 V system rail, and the 1 µA typical standby current limits the penalty when the interface is inactive. Use one driver and one receiver for a unidirectional console path, or pair two devices when command traffic must flow in both directions. The 250 kbit/s limit comfortably covers interactive terminal traffic, while the ±15 kV protected RS-232 pins improve reliability when a service cable is connected in the field.

🏭

Industrial Test and Measurement Equipment

The MAX3221CPWRG4 provides a compact interface between a test instrument and a controller that still uses RS-232. The device operates up to 250 kbit/s, supports both 3.3 V and 5 V supply arrangements, and accepts 5 V logic inputs from a 3.3 V supply. Its single-channel format leaves board area for measurement circuitry, storage, and front-panel interfaces. Place the 0.1 µF charge-pump capacitors close to their pins, and keep the protected cable-side nets away from sensitive analog traces to prevent switching transients from coupling into the measurement front end.

📊

Point-to-Point Data Acquisition Link

The MAX3221CPWRG4 can carry measurement commands and returned data over a dedicated RS-232 connection between two instrumented systems. A transmitter on one board and receiver on the other form one direction; adding a second transceiver at each end enables simultaneous bidirectional transfer. The 250 kbit/s bandwidth supports moderate-rate telemetry rather than bulk file transfer. Because the interface is single-ended, maintain a common ground between equipment and route the cable-side driver output away from precision analog inputs. The ±15 kV ESD rating adds useful protection for externally accessible connections.

🔌

Instrument Service and Configuration Port

The MAX3221CPWRG4 is useful for a service port that allows technicians to configure a controller, update settings, or retrieve diagnostic data. Its single driver and receiver minimize the footprint compared with a two-channel RS-232 device, while the 16-pin TSSOP package supports compact assembly. The 3 V to 5.5 V operating range allows the same circuit to serve legacy 5 V equipment and newer 3.3 V controllers. Use the manufacturer pin table to assign logic signals, connect the 0.1 µF charge-pump capacitors directly at the device, and place protection components where the cable enters the enclosure.

🌐

Controller Communication Gateway

The MAX3221CPWRG4 can bridge a modern controller to an RS-232 peripheral when only one legacy channel is required. The controller can use 3.3 V logic while the interface remains compatible with 5 V logic inputs, reducing the need for a separate interface translator. The device's 250 kbit/s throughput is suitable for status polling, configuration commands, and moderate data packets. For continuous bidirectional service operation, use two MAX3221 devices rather than forcing unidirectional traffic through one half-duplex arrangement, and validate the protocol timeout behavior with the slowest connected peripheral.

📱

Portable Equipment Interface

The MAX3221CPWRG4 fits portable or battery-powered equipment that requires an RS-232 connection without a large interface circuit. Its 1 µA typical standby current is useful when the serial function is enabled only during setup or service, and its 3 V operation supports lithium-powered designs with a 3.3 V rail. The 16-pin TSSOP package leaves board area for battery management and display circuitry. Use the shutdown-capable MAX3221ECPWRG4 variant if the interface must disconnect more aggressively, and verify that the cable-side ground reference is appropriate for a portable system that may be externally connected.

Recommended Products Summary

MAX3221ECPWRG4 Same-family transceiver with automatic power-down Used in: Embedded Serial Console, Industrial Test and Measurement Equipment, Point-to-Point Data Acquisition Link, Instrument Service and Configuration Port, Controller Communication Gateway, Portable Equipment Interface MAX3221IPWRG4 Texas Instruments Used in: Embedded Serial Console, Point-to-Point Data Acquisition Link, Controller Communication Gateway MAX3221CPW Texas Instruments Used in: Industrial Test and Measurement Equipment, Instrument Service and Configuration Port, Portable Equipment Interface
What is the operating voltage range of the MAX3221CPWRG4?
The MAX3221CPWRG4 operates from 3 V to 5.5 V. According to the Texas Instruments MAX3221 product page, this range supports both 3.3 V and 5 V systems. The device can also accept 5 V logic inputs while running from a 3.3 V supply, which simplifies interfacing with older host controllers. Its external charge-pump capacitors are rated at 0.1 µF in the device documentation.
What data rate does the MAX3221CPWRG4 support?
The MAX3221CPWRG4 supports serial data rates up to 250 kbit/s. The Texas Instruments product description identifies the device as a 3 V to 5.5 V single-channel 250 kbit/s RS-232 line driver and receiver. This bandwidth is suitable for legacy serial ports, embedded control links, and instrumentation connections, but it is not intended for modern high-speed differential protocols such as USB or RS-485.
Where can I download the MAX3221CPWRG4 datasheet PDF?
The official MAX3221 datasheet and ordering information are available from the Texas Instruments product page at https://www.ti.com/product/MAX3221. The page provides the manufacturer PDF link together with parameter tables, package details, and ordering options. The MAX3221CPWRG4 ordering code identifies the 16-pin TSSOP, tape-and-reel configuration. Use the manufacturer document as the authority for pin functions, test conditions, and absolute maximum ratings.
Where can I find the MAX3221CPWRG4 pinout?
The MAX3221CPWRG4 pin-assignment diagram appears in the pin-description section of the Texas Instruments MAX3221 datasheet. The device uses a 16-pin TSSOP arrangement with one RS-232 driver and one receiver. Because the charge-pump network and the RS-232 pins are sensitive to layout, assign PCB nets directly from the manufacturer pin table rather than relying only on a generic transceiver footprint.
What kind of protection does the MAX3221CPWRG4 provide?
The MAX3221CPWRG4 provides ±15 kV electrostatic-discharge protection on its RS-232 line-driver and line-receiver interfaces. Texas Instruments describes this protection as a key feature of the MAX3221 family. It improves robustness during cable connection and disconnection, although it does not replace overvoltage, surge, or isolation protection required by a particular industrial or safety standard.
Does the MAX3221CPWRG4 need external charge-pump capacitors?
Yes, the MAX3221CPWRG4 requires external 0.1 µF capacitors for its charge-pump network. These components generate the positive and negative internal voltages needed to produce RS-232-compliant output levels from a single 3 V to 5.5 V supply. Place the capacitors close to their specified pins and keep the associated traces short to minimize switching noise and reduce the risk of unstable charge-pump operation.
Is the MAX3221CPWRG4 suitable for 3.3 V systems?
Yes, the MAX3221CPWRG4 is suitable for 3.3 V systems because it operates down to a 3 V supply and accepts 5 V logic inputs when powered from 3.3 V. The Texas Instruments MAX3221 documentation identifies this 5 V input tolerance with a 3.3 V supply. This allows a 3.3 V microcontroller or logic device to connect to a host that uses 5 V RS-232 levels.
Is the MAX3221CPWRG4 a full-duplex RS-232 transceiver?
The MAX3221CPWRG4 is a full-duplex-capable interface, but each device contains only one driver and one receiver. A complete point-to-point full-duplex link therefore normally uses two transceivers, with one at each end. Distributor and manufacturer listings describe the part as a 1/1 RS-232 transceiver. Verify the connector and signal assignments on both PCB assemblies before power-up.
What standards does the MAX3221CPWRG4 support?
The MAX3221CPWRG4 supports TIA/EIA-232-F and ITU V.28 RS-232 signaling. These requirements define the electrical behavior of single-ended serial interfaces, including the negative voltage used for a valid logic mark and the receiver thresholds for noise tolerance. Compliance with these signaling requirements does not by itself establish compliance with unrelated EMC, safety, or industrial communication protocols.
What can replace the MAX3221CPWRG4?
The closest same-family drop-in choices are the MAX3221ECPWRG4 and MAX3221IPWRG4, both of which use the MAX3221 series package and pin arrangement. The MAX3221CPW is the non-green ordering form of the same device. These alternatives differ in shutdown or receiver-fail-safe behavior, so confirm the original design requirements before changing the bill of materials. Confirm pin compatibility and lifecycle status in the manufacturer documentation.
Is the MAX3221CPWRG4 the same as the MAX3221CPW?
The MAX3221CPWRG4 and MAX3221CPW refer to closely related order codes for the MAX3221 device in the same 16-pin TSSOP package. The G4 designation identifies the lead-free, green-compatible ordering configuration, while the CPW ordering form identifies the standard part number. Cross-reference listings describe their terminals, package, and principal performance characteristics as consistent. Verify the exact suffix required by your BOM and purchasing system.
When should I choose MAX3221CPWRG4 instead of a dual-channel RS-232 transceiver?
Choose the MAX3221CPWRG4 when the design needs only one unidirectional RS-232 signal path and board area is constrained. Its single driver, single receiver, 16-pin TSSOP package, and low standby current are appropriate for embedded service ports and control links. Choose a dual-channel device when both ends of a full-duplex connection can share one transceiver module and when separate transmit and receive circuits would otherwise consume additional board area.
What is the best Texas Instruments equivalent for MAX3221CPWRG4?
The MAX3221ECPWRG4 is the leading same-series alternative because it retains the MAX3221 electrical role and 16-pin TSSOP format while adding automatic power-down behavior. The MAX3221IPWRG4 is another same-family option with different fail-safe receiver characteristics. The correct choice depends on whether shutdown control, receiver fail-safe behavior, or exact ordering-code continuity is most important. Use the manufacturer pin and feature tables for final qualification.
Where can I buy MAX3221CPWRG4 and check current availability?
Use the Request a Quote form on this page to ask about MAX3221CPWRG4 availability, current pricing, and order processing. The part is manufactured by Texas Instruments and is listed as active in manufacturer and cross-reference information. Availability and lead time can change with demand, so request a quotation for the quantity and packaging configuration required by your production build.
What are the key specifications of MAX3221CPWRG4 that engineers should know?
The MAX3221CPWRG4 is a 3 V to 5.5 V, 250 kbit/s, single-driver and single-receiver RS-232 transceiver in a 16-pin TSSOP package. Its major features include ±15 kV ESD protection, 1 µA typical standby current, 0.1 µF external charge-pump capacitors, and acceptance of 5 V logic inputs with a 3.3 V supply. The device also supports TIA/EIA-232-F and ITU V.28 signaling.

Engineering reference data for MAX3221CPWRG4 — comparison, design guidance, and compliance information.

Selection Guide

Choose the MAX3221CPWRG4 when a compact design needs one RS-232 driver and one receiver, a 3 V to 5.5 V supply, and data rates no higher than 250 kbit/s. Its G4 ordering form is appropriate for lead-free, green-compatible procurement, and the device accepts 5 V logic inputs while running from 3.3 V. Select MAX3221ECPWRG4 when automatic power-down is needed to reduce activity in battery-powered or intermittently connected equipment. Select MAX3221IPWRG4 when receiver fail-safe behavior is a priority in the system fault model. MAX3221CPW is the closest non-G ordering form when procurement documentation identifies that suffix as the required equivalent. In every case, confirm the 16-pin TSSOP pin assignment, charge-pump capacitor values, shutdown assumptions, and cable-side protection requirements against the manufacturer datasheet before substituting parts.

Comparison with Alternatives

Parameter This Product MAX3221ECPWRG4 MAX3221IPWRG4 MAX3221CPW
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 16-pin TSSOP 16-pin TSSOP - same 16-pin TSSOP - same 16-pin TSSOP - same
Device Type Single-channel RS-232 line driver and receiver Single-channel RS-232 line driver and receiver Single-channel RS-232 line driver and receiver Single-channel RS-232 line driver and receiver
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V
Maximum Data Rate 250 kbit/s 250 kbit/s 250 kbit/s 250 kbit/s
Driver and Receiver Count 1 driver and 1 receiver 1 driver and 1 receiver 1 driver and 1 receiver 1 driver and 1 receiver
External Charge-Pump Capacitors 0.1 µF 0.1 µF 0.1 µF 0.1 µF

Key Differentiators

  • Single-channel implementation preserves PCB area (vs MAX3221ECPWRG4)
  • Green-compatible ordering option (vs MAX3221CPW)
  • Directly supports low-voltage embedded logic (vs MAX3221IPWRG4)

Design Notes

Place the two 0.1 µF charge-pump capacitors directly beside their specified MAX3221 pins, with short traces and a solid ground-plane connection. Keep the switching-capacitor current loop compact and avoid routing it beneath sensitive analog inputs. If the RS-232 connector is near the board edge, position the protected transceiver pins ahead of any long unprotected trace so that the ESD-designated interface receives the first electrical stress.

Route the RS-232 driver output and receiver input as a matched pair where practical, while keeping them away from clocks, switching-regulator nodes, and high-gain analog inputs. The MAX3221 supplies bipolar levels from a single 3 V to 5.5 V rail, but its charge-pump switching edges can couple into nearby circuitry. Maintain a continuous ground reference between communicating systems and avoid long ground stubs beneath the cable-side signal path.

Do not treat a single MAX3221 as a complete bidirectional link. One device provides one driver and one receiver, so full-duplex communication normally requires a second device at the opposite endpoint. Also verify that the host-side logic voltage is compatible with the 3 V to 5.5 V supply selection and that the selected MAX3221 ordering suffix matches the required production packaging before releasing the PCB.

Compliance Information

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Yes
Halogen Free
Unknown
Conflict Minerals
Unknown

RoHS compliance is identified by distributor and cross-reference listings, and the G4 ordering designation denotes the green-compatible version. No specific REACH, halogen-free, or conflict-minerals declaration is included in the cited product information. AEC-Q100 status is not applicable to this general-purpose interface IC.

Related Searches

MAX3221CPWRG4 MAX3221CPWRG4 datasheet MAX3221CPWRG4 datasheet pdf MAX3221CPWRG4 pinout MAX3221CPWRG4 equivalent MAX3221CPWRG4 replacement MAX3221CPWRG4 cross reference MAX3221CPWRG4 vs MAX3221ECPWRG4 MAX3221CPW RG4 differences Texas Instruments MAX3221CPWRG4 MAX3221 3V 5.5V RS-232 transceiver MAX3221 250kbit single channel transceiver MAX3221 16-TSSOP pinout MAX3221 RS-232 charge pump capacitor MAX3221CPWRG4 price

Related Components & Terms

Texas Instruments MAX3221CPWRG4 MAX3221ECPWRG4 MAX3221IPWRG4 MAX3221CPW RS-232 transceiver line driver line receiver serial interface IC signal-conditioning device TIA/EIA-232-F ITU V.28 ESD protection 250 kbit/s 3 V to 5.5 V supply charge-pump capacitor 0.1 µF capacitor 1 µA standby current 16-pin TSSOP TSSOP package family surface mount RoHS industrial control test and measurement
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details