MAX3221EIDBRG4 - 3V-5.5V RS-232 Transceiver | Texas Instruments
Référence : MAX3221EIDBRG4 ✓ ActifMAX3221EIDBRG4 Présentation
An RS-232 transceiver is an interface IC that combines a differential line driver with a line receiver. It converts logic-level signals into RS-232-compatible levels and converts incoming RS-232 signals back into logic levels. Within the interface hierarchy, the MAX3221EIDBRG4 belongs to the RS-232 transceiver family of interface ICs and is designed for short-distance point-to-point serial links using the RS-232 protocol.
The principal operating features include a 3 V to 5.5 V supply range, one driver and one receiver, and a maximum signaling rate of 250 kbps. The RS-232 pins are protected to ±15 kV under the Human Body Model and to ±8 kV under the IEC 61000-4-2 contact-discharge test. Air-discharge protection reaches ±15 kV, providing a substantial margin for exposed serial ports that may encounter electrostatic discharge.
This single-channel architecture is useful when a system requires one bidirectional RS-232 port without allocating space for a multi-channel transceiver. The broad supply-voltage range allows operation from 3.3 V or 5 V system rails, while the integrated line-driver and receiver circuitry reduces the number of external interface components. The SSOP-16 package provides a practical option for compact industrial, instrumentation, and embedded-control equipment.
Typical applications include configuration-port links in industrial equipment, serial adapters, point-of-sale terminals, laboratory instruments, maintenance interfaces, and embedded systems that exchange commands or diagnostic data with a host computer. At 250 kbps, the interface is appropriate for moderate-speed command and control traffic rather than high-bandwidth bulk transfer.
Designers should use the charge-pump capacitor values and external driver/receiver capacitors specified by the manufacturer datasheet. Keep the RS-232 connector-side traces away from sensitive analog circuitry, provide the required bypass capacitance close to the supply pins, and consider adding connector-side protection where cables extend beyond the enclosure or into industrial environments.
This page combines manufacturer specifications, package and ordering information, drop-in replacement guidance, comparison data, and practical interface-design notes. It is intended to help engineers confirm electrical compatibility, package fit, protection level, and application suitability before assigning the MAX3221EIDBRG4 to a PCB or updating an existing BOM.
Alternatives de remplacement direct pour MAX3221EIDBRG4 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
MAX3221EIDBR
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →MAX3221EIDBRG4 Spécifications
| Product Type | Single-channel RS-232 line driver and receiver |
| Number of Drivers | 1 driver |
| Number of Receivers | 1 receiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| Protocol | RS-232 |
| Boîtier | 16-SSOP, 5.30 mm body width |
| Number of Terminals | 16 terminals |
| Type de montage | Surface mount |
| Packaging | Digi-Reel tape-and-reel packaging |
| Maximum Operating Temperature | 85 °C |
| Temperature Grade | Industrial |
| ESD Protection, Human Body Model | ±15 kV on RS-232 pins |
| ESD Protection, IEC Contact Discharge | ±8 kV on RS-232 pins |
| ESD Protection, IEC Air-Gap Discharge | ±15 kV on RS-232 pins |
| ESD Standard | IEC 61000-4-2 |
| Terminal Finish | Nickel palladium gold |
| Terminal Form | Gull wing |
| Lead-Free Status | Lead-free |
| Green Product | Yes |
Guide de configuration des broches du MAX3221EIDBRG4 16-ssop, 5.30 mm body width
Configuration des broches du MAX3221EIDBRG4 (boîtier 16-ssop, 5.30 mm body width). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour MAX3221EIDBRG4.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MAX3221EIDBRG4 convient pour 6 applications: Industrial Controller Configuration Port, Serial Adapter and Dongle, Laboratory Instrument Control, Point-of-Sale Terminal Interface, Embedded Diagnostic Interface, Remote Monitoring and Sensor Gateway.
Industrial Controller Configuration Port
The MAX3221EIDBRG4 suits an industrial controller that exposes a maintenance or configuration port to a service laptop. Its single driver and receiver provide one bidirectional RS-232 channel, while the 3 V to 5.5 V supply range allows operation beside either 3.3 V or 5 V control logic. The 250 kbps maximum rate is sufficient for parameter uploads, diagnostic commands, and firmware-transfer sessions. Use the manufacturer-specified charge-pump capacitors and external driver and receiver capacitors, and connect the interface ground carefully to avoid injecting ground potential differences into the controller.
Recommandé
Serial Adapter and Dongle
A compact serial adapter can use the MAX3221EIDBRG4 to translate host logic levels to RS-232 without adding a discrete driver and receiver. Its 16-SSOP package supports PCB miniaturization, while operation from 3 V to 5.5 V provides flexibility across USB-bridge and embedded-host designs. The 250 kbps rate is appropriate for configuration and legacy peripheral traffic rather than high-speed data transfer. Place bypass and charge-pump capacitors close to their pins, route driver outputs away from receiver inputs, and provide the connector-side protection required by the enclosure and cable environment.
Recommandé
Laboratory Instrument Control
The MAX3221EIDBRG4 provides a practical control and data link between laboratory instruments and a computer or embedded controller. A 250 kbps RS-232 channel can carry measurement commands, status information, and sampled data when the selected instrument protocol does not require a faster rate. The ±15 kV Human Body Model and IEC 61000-4-2 protection ratings add useful tolerance for exposed equipment ports. The design should still use shielded cable, a defined signal reference, and short RS-232 traces, especially when the instrument and computer can sit at different ground potentials.
Recommandé
Point-of-Sale Terminal Interface
A point-of-sale terminal can use the MAX3221EIDBRG4 for a single peripheral-facing RS-232 connection to a printer, scanner, or customer-facing accessory. Its one-driver, one-receiver arrangement matches the common half-duplex RS-232 link used for short command exchanges, and the 250 kbps rate is suitable for receipt, status, and configuration traffic. The 3 V to 5.5 V supply flexibility supports embedded processors operating at either common logic level. Preserve the manufacturer's charge-pump capacitor arrangement and follow connector and cable ESD-control practices for frequently handled peripherals.
Recommandé
Embedded Diagnostic Interface
The MAX3221EIDBRG4 is useful for adding a service-oriented diagnostic channel to an embedded control system without allocating a multi-transceiver package. A host technician can use the link for boot messages, fault codes, configuration transfer, and production-test commands. The 250 kbps rate supports these tasks while the single-channel SSOP-16 footprint simplifies routing compared with a quad-channel device. Design the firmware with command framing, timeout handling, and software flow control, and isolate the logic ground from noisy motor or relay returns where possible.
Recommandé
Remote Monitoring and Sensor Gateway
A monitoring gateway can use the MAX3221EIDBRG4 to connect a local controller to an RS-232 modem, controller, or remote terminal. The device provides one complete line interface at up to 250 kbps, making it appropriate for telemetry commands and periodically transferred records. Its IEC 61000-4-2 contact and air-discharge protection ratings are valuable when the gateway is installed in an industrial enclosure, although additional measures may be needed for severe surges or outdoor cables. Keep the protected RS-232 side electrically separated from sensitive sensing and processing circuitry.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MAX3221EIDBRG4 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MAX3221EIDBR |
|---|---|---|
| Package | SSOP-16 | SSOP-16 |
| Brand | Texas Instruments | Texas Instruments |
| Transceiver Configuration | 1 driver / 1 receiver | 1 driver / 1 receiver |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbps |
| Protocol | RS-232 | RS-232 |
| Lead-Free Configuration | Yes, G4 ordering suffix | No G4 suffix |
| ESD Protection | ±15 kV HBM; ±8 kV IEC contact; ±15 kV IEC air-gap | ±15 kV HBM; ±8 kV IEC contact; ±15 kV IEC air-gap |
Principaux différenciateurs
- Single-channel integration reduces board area (vs MAX3221EIDBR)
- Supports both common embedded supply levels (vs MAX3221EIDBR)
- Built-in RS-232 pin ESD protection (vs MAX3221EIDBR)
Notes de conception
Place the charge-pump capacitors and supply bypass capacitor close to their corresponding MAX3221EIDBRG4 pins, with short, direct traces and a low-impedance ground return. Follow the exact capacitor values, tolerance, and placement shown in the Texas Instruments datasheet because charge-pump operation and loop area affect driver performance. Keep the SSOP-16 land pattern within the manufacturer package drawing limits and preserve access to all pins for automated inspection.
Route the RS-232 driver output and receiver input as a balanced pair where practical, and keep them away from clocks, ADC signals, switching-regulator nodes, and high-impedance sensor inputs. The receiver can respond to unwanted coupling on the driver net, so minimize loop area and avoid long unprotected traces. Connect the interface ground deliberately at the system reference point; do not allow large motor, relay, or chassis currents to flow through the transceiver ground path.
Do not assume that the IC-level ±15 kV IEC air-discharge rating makes every exposed RS-232 port compliant without system-level design. Specify suitable connector grounding, cable shielding, chassis-entry treatment, and any required external surge protection. Also verify the G4 finish, reel format, moisture-handling requirements, and maximum operating temperature for the production assembly before releasing a BOM substitution.
Informations de conformité
The component listing identifies the MAX3221EIDBRG4 as a lead-free G4 configuration with a nickel palladium gold terminal finish and a green product designation. RoHS, REACH, halogen-free, and conflict-minerals status are not explicitly established for this exact order code.