Texas Instruments

MAX3221EIDBRG4 - 3V-5.5V RS-232 Transceiver | Texas Instruments

MPN: MAX3221EIDBRG4 ✓ Aktif
3 V to 5.5 V Vdss 16-SSOP, 5.30 mm body width Package
MOQ: 1 |

MAX3221EIDBRG4 Genel Bakış

The Texas Instruments MAX3221EIDBRG4 is a 3 V to 5.5 V single-channel RS-232 line driver and receiver with a 250 kbps data rate and ±15 kV IEC ESD protection on the RS-232 pins. The device is packaged in a 16-pin SSOP with a 5.30 mm body width and is supplied in the G4 lead-free, tape-and-reel configuration.

An RS-232 transceiver is an interface IC that combines a differential line driver with a line receiver. It converts logic-level signals into RS-232-compatible levels and converts incoming RS-232 signals back into logic levels. Within the interface hierarchy, the MAX3221EIDBRG4 belongs to the RS-232 transceiver family of interface ICs and is designed for short-distance point-to-point serial links using the RS-232 protocol.

The principal operating features include a 3 V to 5.5 V supply range, one driver and one receiver, and a maximum signaling rate of 250 kbps. The RS-232 pins are protected to ±15 kV under the Human Body Model and to ±8 kV under the IEC 61000-4-2 contact-discharge test. Air-discharge protection reaches ±15 kV, providing a substantial margin for exposed serial ports that may encounter electrostatic discharge.

This single-channel architecture is useful when a system requires one bidirectional RS-232 port without allocating space for a multi-channel transceiver. The broad supply-voltage range allows operation from 3.3 V or 5 V system rails, while the integrated line-driver and receiver circuitry reduces the number of external interface components. The SSOP-16 package provides a practical option for compact industrial, instrumentation, and embedded-control equipment.

Typical applications include configuration-port links in industrial equipment, serial adapters, point-of-sale terminals, laboratory instruments, maintenance interfaces, and embedded systems that exchange commands or diagnostic data with a host computer. At 250 kbps, the interface is appropriate for moderate-speed command and control traffic rather than high-bandwidth bulk transfer.

Designers should use the charge-pump capacitor values and external driver/receiver capacitors specified by the manufacturer datasheet. Keep the RS-232 connector-side traces away from sensitive analog circuitry, provide the required bypass capacitance close to the supply pins, and consider adding connector-side protection where cables extend beyond the enclosure or into industrial environments.

This page combines manufacturer specifications, package and ordering information, drop-in replacement guidance, comparison data, and practical interface-design notes. It is intended to help engineers confirm electrical compatibility, package fit, protection level, and application suitability before assigning the MAX3221EIDBRG4 to a PCB or updating an existing BOM.

Drop-in alternatifler için MAX3221EIDBRG4 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

MAX3221EIDBR

✅ Yerleştirme
Texas Instruments
📦 SSOP-16
RS-232 line driver and receiver transceiver · 1 · 1 · 250kbps · 3V to 5.5V · TIA/EIA-232-F · IEC 61000-4-2 · ±15kV

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3221EIDBRG4 Özellikler

Product Type Single-channel RS-232 line driver and receiver
Number of Drivers 1 driver
Number of Receivers 1 receiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
Protocol RS-232
Paket 16-SSOP, 5.30 mm body width
Number of Terminals 16 terminals
Montaj Türü Surface mount
Packaging Digi-Reel tape-and-reel packaging
Maximum Operating Temperature 85 °C
Temperature Grade Industrial
ESD Protection, Human Body Model ±15 kV on RS-232 pins
ESD Protection, IEC Contact Discharge ±8 kV on RS-232 pins
ESD Protection, IEC Air-Gap Discharge ±15 kV on RS-232 pins
ESD Standard IEC 61000-4-2
Terminal Finish Nickel palladium gold
Terminal Form Gull wing
Lead-Free Status Lead-free
Green Product Yes

MAX3221EIDBRG4 16-ssop, 5.30 mm body width Pin Yapısı Kılavuzu

MAX3221EIDBRG4 (16-ssop, 5.30 mm body width paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

16-ssop, 5.30 mm body width paket pin çizelgesi için MAX3221EIDBRG4

Ayrıntılı pin çıkış verisi mevcut değil: MAX3221EIDBRG4.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

MAX3221EIDBRG4 için uygundur 6 uygulamas: Industrial Controller Configuration Port, Serial Adapter and Dongle, Laboratory Instrument Control, Point-of-Sale Terminal Interface, Embedded Diagnostic Interface, Remote Monitoring and Sensor Gateway.

🏭

Industrial Controller Configuration Port

The MAX3221EIDBRG4 suits an industrial controller that exposes a maintenance or configuration port to a service laptop. Its single driver and receiver provide one bidirectional RS-232 channel, while the 3 V to 5.5 V supply range allows operation beside either 3.3 V or 5 V control logic. The 250 kbps maximum rate is sufficient for parameter uploads, diagnostic commands, and firmware-transfer sessions. Use the manufacturer-specified charge-pump capacitors and external driver and receiver capacitors, and connect the interface ground carefully to avoid injecting ground potential differences into the controller.

🔧

Serial Adapter and Dongle

A compact serial adapter can use the MAX3221EIDBRG4 to translate host logic levels to RS-232 without adding a discrete driver and receiver. Its 16-SSOP package supports PCB miniaturization, while operation from 3 V to 5.5 V provides flexibility across USB-bridge and embedded-host designs. The 250 kbps rate is appropriate for configuration and legacy peripheral traffic rather than high-speed data transfer. Place bypass and charge-pump capacitors close to their pins, route driver outputs away from receiver inputs, and provide the connector-side protection required by the enclosure and cable environment.

📟

Laboratory Instrument Control

The MAX3221EIDBRG4 provides a practical control and data link between laboratory instruments and a computer or embedded controller. A 250 kbps RS-232 channel can carry measurement commands, status information, and sampled data when the selected instrument protocol does not require a faster rate. The ±15 kV Human Body Model and IEC 61000-4-2 protection ratings add useful tolerance for exposed equipment ports. The design should still use shielded cable, a defined signal reference, and short RS-232 traces, especially when the instrument and computer can sit at different ground potentials.

🖥️

Point-of-Sale Terminal Interface

A point-of-sale terminal can use the MAX3221EIDBRG4 for a single peripheral-facing RS-232 connection to a printer, scanner, or customer-facing accessory. Its one-driver, one-receiver arrangement matches the common half-duplex RS-232 link used for short command exchanges, and the 250 kbps rate is suitable for receipt, status, and configuration traffic. The 3 V to 5.5 V supply flexibility supports embedded processors operating at either common logic level. Preserve the manufacturer's charge-pump capacitor arrangement and follow connector and cable ESD-control practices for frequently handled peripherals.

🧩

Embedded Diagnostic Interface

The MAX3221EIDBRG4 is useful for adding a service-oriented diagnostic channel to an embedded control system without allocating a multi-transceiver package. A host technician can use the link for boot messages, fault codes, configuration transfer, and production-test commands. The 250 kbps rate supports these tasks while the single-channel SSOP-16 footprint simplifies routing compared with a quad-channel device. Design the firmware with command framing, timeout handling, and software flow control, and isolate the logic ground from noisy motor or relay returns where possible.

🌐

Remote Monitoring and Sensor Gateway

A monitoring gateway can use the MAX3221EIDBRG4 to connect a local controller to an RS-232 modem, controller, or remote terminal. The device provides one complete line interface at up to 250 kbps, making it appropriate for telemetry commands and periodically transferred records. Its IEC 61000-4-2 contact and air-discharge protection ratings are valuable when the gateway is installed in an industrial enclosure, although additional measures may be needed for severe surges or outdoor cables. Keep the protected RS-232 side electrically separated from sensitive sensing and processing circuitry.

Önerilen Ürünler Özeti

TS321IDR Texas Instruments Kullanıldığı Yer: Industrial Controller Configuration Port, Serial Adapter and Dongle, Laboratory Instrument Control, Point-of-Sale Terminal Interface, Embedded Diagnostic Interface, Remote Monitoring and Sensor Gateway TS3221IDR Single-driver RS-232 interface option Kullanıldığı Yer: Industrial Controller Configuration Port, Serial Adapter and Dongle, Laboratory Instrument Control, Point-of-Sale Terminal Interface, Embedded Diagnostic Interface, Remote Monitoring and Sensor Gateway
What is the operating voltage of MAX3221EIDBRG4?
The MAX3221EIDBRG4 operates from a 3 V to 5.5 V supply. According to the Texas Instruments MAX3221E product information, this range supports both 3.3 V and 5 V systems. The RS-232 driver and receiver share the device supply, so the host system should regulate the interface rail within the specified limits and place the required bypass capacitors close to the supply pins. Operation below 3 V or above 5.5 V is outside the manufacturer's stated operating range.
What is the data rate of MAX3221EIDBRG4?
The MAX3221EIDBRG4 supports a maximum RS-232 signaling rate of 250 kbps. Texas Instruments identifies the device as a single-channel 250 kbps RS-232 line driver and receiver. This is suitable for command, configuration, diagnostic, and control links, but it is not intended for high-speed bulk-data transfers. Actual application throughput also depends on the host UART, cable characteristics, framing protocol, and whether the link operates in one-way or bidirectional mode.
What ESD protection does MAX3221EIDBRG4 provide?
The MAX3221EIDBRG4 provides ±15 kV Human Body Model protection and IEC 61000-4-2 protection of ±8 kV for contact discharge and ±15 kV for air-gap discharge on the RS-232 pins. According to the Texas Instruments product description, the interface is designed for industrial electrostatic-discharge environments. This protection reduces stress on the transceiver but does not replace a correctly engineered cable shield, chassis grounding, or connector-side surge strategy.
Where can I download the MAX3221EIDBRG4 datasheet PDF?
The MAX3221EIDBRG4 datasheet can be obtained from the Texas Instruments MAX3221E product page or the manufacturer datasheet link listed on this page. The document is titled for the MAX3221E family and covers the 3 V to 5.5 V single-channel RS-232 driver and receiver. Use the pin-description table, electrical characteristics, charge-pump capacitor requirements, and external capacitor recommendations in that document when designing the PCB.
Where is the MAX3221EIDBRG4 pinout?
The MAX3221EIDBRG4 uses a 16-SSOP package, and its complete pin configuration is shown in the pin-description table of the Texas Instruments MAX3221E datasheet. The ordering code contains the G4 finish identifier, while the electrical pin functions correspond to the MAX3221E family. Assign PCB land patterns and nets from the datasheet pin table rather than relying solely on a distributor package thumbnail, particularly for the charge-pump, supply, ground, driver-output, and receiver-input connections.
What is the MAX3221EIDBRG4 used for?
The MAX3221EIDBRG4 is used to connect a 3.3 V or 5 V digital system to an RS-232 port. Its integrated driver converts digital transmit data into RS-232 levels, while its receiver converts incoming RS-232 levels into a digital signal. The 250 kbps maximum rate makes it well suited to configuration ports, test equipment, industrial controllers, serial adapters, and diagnostic interfaces that exchange commands rather than continuous high-throughput data.
Is the MAX3221EIDBRG4 compatible with 3.3 V systems?
Yes, the MAX3221EIDBRG4 is compatible with 3.3 V systems because its specified supply-voltage range is 3 V to 5.5 V. The same device therefore supports both 3.3 V and 5 V host rails. Confirm the receiver threshold and interface timing against the operating conditions in the Texas Instruments datasheet, and verify that the UART logic levels match the host controller. The supply range alone does not remove the need for correct reference-ground and cable-routing decisions.
Can MAX3221EIDBRG4 replace MAX3221EIDBR?
The MAX3221EIDBRG4 is a MAX3221E-family option with the same core function, supply range, data rate, and 16-SSOP package format as MAX3221EIDBR. The distinguishing suffix is the G4 lead-free terminal-finish configuration, with the device supplied in Digi-Reel packaging. A board-level substitution should still be confirmed against the manufacturer ordering information and current package drawings before quantity release.
What is the best drop-in replacement for MAX3221EIDBRG4?
The closest documented same-family drop-in replacement is the MAX3221EIDBR because both identify the MAX3221E single-channel RS-232 interface in the 16-SSOP package. The MAX3221EIDBRG4 adds the G4 lead-free finish identifier and Digi-Reel order packaging. Because the replacement data does not establish additional electrically equivalent cross-brand parts in the same 16-SSOP footprint, engineers should verify any proposed substitute against the pin table and electrical characteristics before using it as a drop-in device.
What can replace MAX3221EIDBRG4?
A suitable replacement must combine the same 16-SSOP footprint, pin-compatible charge-pump connections, 3 V to 5.5 V operation, one driver and one receiver, and at least 250 kbps signaling capability. MAX3221EIDBR is the directly identified same-family option. Other listed MAX3221E and TRS3221E devices use different package options or ordering configurations, so they are not automatically drop-in replacements for this 16-SSOP G4 assembly.
Is MAX3221EIDBRG4 the same as MAX3221EIDBR?
The MAX3221EIDBRG4 and MAX3221EIDBR share the MAX3221E interface function and 16-SSOP package format, but their order codes identify different finish and packaging configurations. The G4 version is described as lead-free with nickel palladium gold terminals and Digi-Reel packaging. Treat them as electrically equivalent for typical interface use while confirming environmental, finish, and reel requirements in the manufacturer ordering table.
MAX3221EIDBRG4 vs MAX3221EIDBR — which should I choose?
Choose MAX3221EIDBRG4 when the assembly requires the G4 lead-free finish and Digi-Reel ordering configuration. Choose MAX3221EIDBR when its ordering format satisfies the production requirements and it provides a more suitable sourcing path. The core MAX3221E electrical role remains a 3 V to 5.5 V, single-channel, 250 kbps RS-232 transceiver with ±15 kV IEC-rated ESD protection on the RS-232 pins, so the decision is primarily ordering, finish, and availability related.
When should I choose MAX3221EIDBRG4 over another RS-232 transceiver?
Choose the MAX3221EIDBRG4 when the design needs one RS-232 channel, operation from a 3 V to 5.5 V supply, up to 250 kbps, and a 16-SSOP footprint with integrated IEC 61000-4-2 ESD protection. It is less suitable when multiple channels, substantially faster signaling, automatic shutdown, or a different package is required. Those requirements should drive the choice of a multi-channel or higher-speed transceiver rather than an unverified package substitution.
Is MAX3221EIDBRG4 suitable for industrial equipment?
The MAX3221EIDBRG4 is suitable for many industrial RS-232 interfaces because it is an industrial-temperature-grade device with an operating maximum of 85 °C and IEC 61000-4-2 ESD protection on the RS-232 pins. Industrial suitability also depends on the complete system design: use appropriate cable shielding, reliable signal-ground handling, compliant power supplies, and enclosure-level surge protection. The IC rating does not by itself guarantee compliance for an installed product.
Where can I buy MAX3221EIDBRG4 and check its price and lead time?
Use the Request a Quote form on this page to request current MAX3221EIDBRG4 pricing, stock allocation, and lead time for the required reel quantity. The form is the appropriate route because market prices and availability change continuously and depend on order volume. For design confirmation, retain the Texas Instruments MAX3221E datasheet and product page as the authoritative references for electrical limits, package dimensions, and ordering information.
What are the key specifications of MAX3221EIDBRG4 that engineers should know?
The key MAX3221EIDBRG4 specifications are a 3 V to 5.5 V supply, one RS-232 driver and one receiver, a 250 kbps maximum data rate, and a 16-SSOP package. Its RS-232 pins provide ±15 kV Human Body Model protection, ±8 kV IEC contact-discharge protection, and ±15 kV IEC air-discharge protection. Texas Instruments also identifies the G4 version as lead-free with a nickel palladium gold terminal finish and Digi-Reel packaging.

Mühendislik referans verileri: MAX3221EIDBRG4 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the MAX3221EIDBRG4 for a compact, single-channel RS-232 design that operates from 3 V to 5.5 V at up to 250 kbps and requires the specified G4 lead-free terminal finish and Digi-Reel order configuration. Its integrated driver and receiver simplify the interface, while its IEC 61000-4-2 protection ratings support use in electrically noisy installations. MAX3221EIDBR is the closest identified same-family drop-in alternative when its ordering, finish, and sourcing configuration satisfy the production plan. Do not substitute devices merely because they are described as MAX3221E or TRS3221E equivalents: check the package, pinout, electrical timing, capacitor requirements, and ESD ratings. Choose a multi-channel device when several RS-232 ports must share one PCB, and choose a faster interface when the application requires sustained throughput above 250 kbps.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MAX3221EIDBR
Package SSOP-16 SSOP-16
Brand Texas Instruments Texas Instruments
Transceiver Configuration 1 driver / 1 receiver 1 driver / 1 receiver
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V
Maximum Data Rate 250 kbps 250 kbps
Protocol RS-232 RS-232
Lead-Free Configuration Yes, G4 ordering suffix No G4 suffix
ESD Protection ±15 kV HBM; ±8 kV IEC contact; ±15 kV IEC air-gap ±15 kV HBM; ±8 kV IEC contact; ±15 kV IEC air-gap

Ana Farklılayıcılar

  • Single-channel integration reduces board area (karşılaştırma:MAX3221EIDBR)
  • Supports both common embedded supply levels (karşılaştırma:MAX3221EIDBR)
  • Built-in RS-232 pin ESD protection (karşılaştırma:MAX3221EIDBR)

Tasarım Notları

Place the charge-pump capacitors and supply bypass capacitor close to their corresponding MAX3221EIDBRG4 pins, with short, direct traces and a low-impedance ground return. Follow the exact capacitor values, tolerance, and placement shown in the Texas Instruments datasheet because charge-pump operation and loop area affect driver performance. Keep the SSOP-16 land pattern within the manufacturer package drawing limits and preserve access to all pins for automated inspection.

Route the RS-232 driver output and receiver input as a balanced pair where practical, and keep them away from clocks, ADC signals, switching-regulator nodes, and high-impedance sensor inputs. The receiver can respond to unwanted coupling on the driver net, so minimize loop area and avoid long unprotected traces. Connect the interface ground deliberately at the system reference point; do not allow large motor, relay, or chassis currents to flow through the transceiver ground path.

Do not assume that the IC-level ±15 kV IEC air-discharge rating makes every exposed RS-232 port compliant without system-level design. Specify suitable connector grounding, cable shielding, chassis-entry treatment, and any required external surge protection. Also verify the G4 finish, reel format, moisture-handling requirements, and maximum operating temperature for the production assembly before releasing a BOM substitution.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Yes
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The component listing identifies the MAX3221EIDBRG4 as a lead-free G4 configuration with a nickel palladium gold terminal finish and a green product designation. RoHS, REACH, halogen-free, and conflict-minerals status are not explicitly established for this exact order code.

İlgili Aramalar

MAX3221EIDBRG4 datasheet MAX3221EIDBRG4 specifications MAX3221EIDBRG4 pinout MAX3221EIDBRG4 datasheet pdf MAX3221EIDBRG4 equivalent MAX3221EIDBRG4 replacement MAX3221EIDBRG4 cross reference MAX3221EIDBRG4 vs MAX3221EIDBR MAX3221EIDBRG4 footprint MAX3221EIDBRG4 price MAX3221EIDBRG4 stock Texas Instruments MAX3221EIDBRG4 MAX3221EIDBRG4 RS-232 transceiver MAX3221EIDBRG4 250 kbps MAX3221EIDBRG4 industrial interface

İlgili Bileşenler ve Terimler

Texas Instruments MAX3221EIDBRG4 MAX3221EIDBR MAX3221E RS-232 RS-232 transceiver single-channel line driver single-channel receiver interface IC semiconductor 3 V to 5.5 V supply 250 kbps IEC 61000-4-2 Human Body Model electrostatic discharge protection SSOP-16 SSOP package family surface-mount package Digi-Reel lead-free industrial equipment configuration port charge-pump capacitor RS-232 connector
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle