Texas Instruments

MAX3221EIPWG4 - 250kbps Single RS-232 Transceiver | TI

Référence : MAX3221EIPWG4 ✗ Fin de vie
3V to 5.5V Vdss 16-pin TSSOP Package
MOQ : 1 |

MAX3221EIPWG4 Présentation

Texas Instruments MAX3221EIPWG4 is a single-channel RS-232 line transceiver with one driver and one receiver, a 250kbps maximum data rate, and ±15kV ESD protection. It operates from a single 3V to 5.5V supply and is packaged in a 16-pin TSSOP. The MAX3221E series provides the electrical interface between an asynchronous communications controller and an RS-232 connector.

An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and the voltage-domain signals used by RS-232 equipment. The MAX3221E belongs to the line-driver and receiver hierarchy, converts one transmit and one receive channel, and uses an on-chip charge pump with four external capacitors to generate the bipolar voltage required for RS-232 transmission.

The device supports 3V to 5.5V operation and data rates up to 250kbps. Its ±15kV ESD protection applies to the RS-232 pins and helps protect the interface when cables are connected or disconnected. According to the manufacturer product page, the MAX3221 family meets TIA/EIA-232-F requirements, while the MAX3221E description identifies IEC 61000-4-2 ESD protection on the RS-232 pins.

Typical uses include industrial serial-port equipment, data acquisition systems, embedded controllers, test and measurement instruments, and service interfaces that communicate through legacy RS-232 links. The single-channel architecture is appropriate when only one physical RS-232 channel is required and board area is more important than multi-channel integration. The 16-pin TSSOP supports compact surface-mount layouts, but its gull-wing leads require adequate spacing between the device and surrounding circuitry.

The MAX3221EIPWG4 is marked obsolete and is no longer manufactured. New designs should confirm the lifecycle status of the selected replacement and compare its pinout, supply range, data rate, ESD rating, and charge-pump capacitor requirements before release. The obsolete status also makes obsolete-part sourcing, traceability, and long-term availability important procurement considerations.

This page combines the manufacturer’s electrical specifications, lifecycle information, package details, application guidance, and a strict drop-in comparison framework. For a production redesign, verify the complete pin description and capacitor values in the manufacturer datasheet, then confirm supply-chain status using the Request a Quote form on this page before committing the component to a new PCB revision.

Alternatives de remplacement direct pour MAX3221EIPWG4 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

MAX3221IPWG4

✅ Remplacement direct
Texas Instruments
📦 16-pin TSSOP
Single-channel RS-232 line driver/receiver · 3 V to 5.5 V · 250 kbps · 1 · 1 · ±15 kV · 1 µA · 3.3 V and 5 V RS-232 interface

Contactez-nous pour le prix

Voir la fiche technique →

MAX3221EIPWG4 Spécifications

Product Type Single-channel RS-232 line transceiver
Number of Drivers 1
Number of Receivers 1
Supply Voltage Range 3V to 5.5V
Maximum Data Rate 250kbps
RS-232 Pin ESD Protection ±15kV
ESD Qualification IEC 61000-4-2
RS-232 Compliance TIA/EIA-232-F
External Charge-Pump Capacitors 4
Boîtier 16-pin TSSOP
Terminal Count 16
Type de montage Surface mount
Terminal Form Gull wing
Plage de température de fonctionnement -40°C to +85°C
Temperature Grade Industrial
Statut du cycle de vie Obsolete

Guide de configuration des broches du MAX3221EIPWG4 16-pin tssop

Configuration des broches du MAX3221EIPWG4 (boîtier 16-pin tssop). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 16-pin tssop pour le MAX3221EIPWG4

Aucune donnée de brochage détaillée disponible pour MAX3221EIPWG4.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

MAX3221EIPWG4 convient pour 6 applications: Industrial Serial-Port Control, Embedded Data-Acquisition Interface, Test and Measurement Equipment, Legacy Equipment Maintenance, RS-232 Configuration and Service Port, Point-to-Serial Equipment Link.

🏭

Industrial Serial-Port Control

The MAX3221EIPWG4 fits a legacy industrial controller that must communicate through one RS-232 port at rates up to 250kbps. Its single driver and receiver provide the required bidirectional logic-to-RS-232 conversion from a 3V to 5.5V supply, while ±15kV ESD protection on the RS-232 pins adds useful protection for a connector subject to cable insertion and removal. The -40°C to +85°C industrial temperature range supports factory equipment, although the exact obsolete MPN should be reserved for designs where lifecycle continuity or traceability outweigh the availability of a newer supported device.

📡

Embedded Data-Acquisition Interface

A data-acquisition controller can use the MAX3221EIPWG4 to connect a 3V or 5V logic domain to a single RS-232 instrument port. The device supports communication rates up to 250kbps and converts logic-level driver input and receiver output to and from RS-232 levels. Its ±15kV protection on the external RS-232 pins is valuable in laboratory and industrial environments where the cable connector may be exposed to electrostatic discharge. The charge-pump network must use the values and placement guidance in the manufacturer datasheet.

🔧

Test and Measurement Equipment

The MAX3221EIPWG4 is appropriate for a single-port service or control interface on test and measurement equipment. A 250kbps maximum data rate supports typical low-speed command traffic, while the 3V to 5.5V supply range allows use with either 3.3V or 5V controller systems. The ±15kV RS-232-pin ESD protection helps the interface withstand charged cable contact, and the industrial -40°C to +85°C range supports demanding equipment. For new platforms, compare a currently supported transceiver before committing the obsolete MPN to a long production lifecycle.

🔧

Legacy Equipment Maintenance

The MAX3221EIPWG4 is useful when repairing or extending equipment that already contains this obsolete 16-pin TSSOP transceiver. Its one-driver, one-receiver configuration matches a legacy single-port RS-232 architecture, and its 250kbps rate and 3V to 5.5V operating range cover the original interface class. Pin-compatible continuity is essential, so compare the MAX3221IPWG4 candidate against the exact schematic and manufacturer datasheet before substituting. Traceability and remaining inventory should be addressed when requesting a quotation.

🖥️

RS-232 Configuration and Service Port

A configuration port on an embedded appliance can use the MAX3221EIPWG4 when the system already specifies this device and requires one RS-232 channel. The transceiver operates from 3V to 5.5V and supports command traffic up to 250kbps, while its external ESD rating is particularly relevant to a service connector accessible during installation. Keep the charge-pump capacitors close to the IC and provide a low-impedance ground plane to limit switching-current paths. Because the exact MPN is obsolete, a lifecycle review should determine whether an available pin-compatible part is preferable.

🌐

Point-to-Serial Equipment Link

The MAX3221EIPWG4 can serve as the interface between two legacy RS-232 systems when only one channel is required. Its separate transmit and receive paths support full-duplex operation, and the 250kbps rate is sufficient for many configuration, monitoring, and short command exchanges. Operating from 3V to 5.5V permits integration with both 3.3V and 5V control electronics. The ±15kV RS-232-pin protection improves robustness at the connector, but ESD protection does not replace correct grounding, cable routing, or system-level surge protection.

What is the MAX3221EIPWG4?
The MAX3221EIPWG4 is a Texas Instruments single-channel RS-232 transceiver containing one line driver and one receiver. It operates from 3V to 5.5V, supports rates up to 250kbps, and provides ±15kV ESD protection on the RS-232 pins. According to the manufacturer product page, the device provides the electrical interface between an asynchronous communication controller and an RS-232 connector.
What is the operating voltage of MAX3221EIPWG4?
The MAX3221EIPWG4 operates from 3V to 5.5V. The manufacturer describes the MAX3221E as a single-supply RS-232 line driver and receiver and identifies four small external charge-pump capacitors as part of the voltage-conversion circuit. Use the manufacturer datasheet to select the required capacitor voltage rating and confirm startup behavior at the minimum supply voltage.
What is the maximum data rate of MAX3221EIPWG4?
The MAX3221EIPWG4 supports a maximum data rate of 250kbps. According to the Texas Instruments MAX3221 product page, this operating capability applies to the 3V to 5.5V single-channel RS-232 driver and receiver family. Cable length, baud rate, loading, and signal integrity can still limit practical communication distance, so the complete interface should be evaluated with its intended connector and cable.
What ESD protection does MAX3221EIPWG4 provide?
The MAX3221EIPWG4 provides ±15kV ESD protection on the RS-232 pins. The manufacturer product description identifies IEC 61000-4-2 protection, while the MAX3221 family page states ±15kV ESD protection. This rating concerns the specified RS-232 pins and should not be interpreted as applying to every supply or logic pin; external protection may still be needed for exposed connectors.
Where can I download the MAX3221EIPWG4 datasheet PDF?
The official MAX3221E datasheet is available from the Texas Instruments product page at https://www.ti.com/lit/gpn/MAX3221E. It contains the pin description, electrical characteristics, charge-pump capacitor requirements, and RS-232 application information. Use that manufacturer document as the controlling technical reference when checking the obsolete device’s exact pin functions and layout.
Where can I find the MAX3221EIPWG4 pinout?
The MAX3221EIPWG4 pinout is documented in the manufacturer MAX3221E datasheet and its 16-pin TSSOP pin-description table. The verified package information identifies 16 gull-wing terminals, but it does not provide a complete numbered pin list. Use the pin-description table in the manufacturer datasheet before assigning PCB nets, and preserve the exposed lead numbering shown on the package drawing.
Is MAX3221EIPWG4 still manufactured?
No. The MAX3221EIPWG4 is obsolete and no longer manufactured. The manufacturer product family remains available for technical documentation, but a new production design should use a currently supported part after verifying lifecycle status. For obsolete inventory, request a quotation through the Request a Quote form on this page so traceability and availability can be confirmed.
What can replace the MAX3221EIPWG4?
The closest same-family drop-in candidate is the MAX3221IPWG4, which uses the same 16-pin TSSOP format but does not carry the MAX3221E enhanced-ESD designation. Because a production replacement must match every pin and operating limit, review the manufacturer datasheets and qualification requirements before substitution. Request a quotation through the Request a Quote form on this page for availability and traceability information.
Is MAX3221EIPWG4 the same as MAX3221IPWG4?
The MAX3221EIPWG4 and MAX3221IPWG4 are closely related 16-pin TSSOP devices, but the E suffix identifies the MAX3221E version with enhanced RS-232-pin ESD protection. The verified listings also indicate that MAX3221EIPWG4 is obsolete while MAX3221IPWG4 remains listed for sale. Treat the E designation as a functional distinction and validate the exact pin-level electrical requirements before interchange.
MAX3221EIPWG4 vs MAX3221IPWG4: which is better for an industrial port?
Choose the MAX3221EIPWG4 when an existing industrial design specifically requires its ±15kV RS-232-pin ESD protection and the manufacturer documentation confirms the required operating limits. For a new design, consider MAX3221IPWG4 because it is listed as available, but do not assume equivalence without comparing pin functions, supply range, data rate, and ESD requirements.
When should I choose MAX3221EIPWG4 over another RS-232 transceiver?
Choose the MAX3221EIPWG4 only when an existing design needs a single 3V to 5.5V RS-232 channel, a maximum rate of 250kbps, and the MAX3221E family’s ±15kV RS-232-pin ESD protection. Its obsolete lifecycle makes it more appropriate for maintenance or controlled legacy replication than for new volume designs. Prefer a supported pin-compatible device when no historical qualification requirement exists.
Is MAX3221EIPWG4 suitable for a custom industrial serial interface?
The MAX3221EIPWG4 is technically suitable for a legacy single-channel industrial RS-232 interface that operates within 3V to 5.5V at no more than 250kbps and needs ±15kV ESD protection on the RS-232 pins. Its industrial temperature grade is -40°C to +85°C. Because the exact orderable part is obsolete, confirm system lifetime, certification, and supply requirements before approving a new design.
Where can I buy MAX3221EIPWG4 and what is the lead time?
Use the Request a Quote form on this page to request the current price, stock status, minimum order quantity, and lead time for MAX3221EIPWG4. The manufacturer listing identifies the part as obsolete and no longer manufactured, so availability may depend on remaining inventory rather than normal production allocation. Traceability requirements should be stated with the request.
What is the price of MAX3221EIPWG4?
Current price, stock status, and minimum order quantity for MAX3221EIPWG4 should be obtained through the Request a Quote form on this page. The part is obsolete and no longer manufactured, so a quote may depend on the quantity of remaining inventory, traceability documentation, and inspection requirements. Submit the exact MPN and required delivery quantity with the request.
How should the MAX3221EIPWG4 charge-pump capacitors be placed?
Place the four required charge-pump capacitors close to their associated device pins, using short traces and a low-impedance ground return. The manufacturer describes the MAX3221E as using an on-chip charge pump and four small external capacitors. Confirm the exact capacitance, tolerance, voltage rating, and PCB land pattern in the manufacturer datasheet before releasing the layout.
Does MAX3221EIPWG4 require external RS-232 protection diodes?
The MAX3221EIPWG4 already provides ±15kV ESD protection on its RS-232 pins according to the manufacturer product description. External protection can still be required for lightning, severe industrial surges, or regulatory requirements beyond the device’s ESD rating. Confirm the system-level threat level and protection strategy rather than adding redundant components without an engineering basis.

Données de référence d'ingénierie pour MAX3221EIPWG4 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the MAX3221EIPWG4 when maintaining an existing design specifically requires the MAX3221E enhanced-ESD version, a single RS-232 channel, 3V to 5.5V operation, and a 250kbps maximum data rate. Its ±15kV RS-232-pin protection and -40°C to +85°C industrial grade suit connected industrial equipment, but the obsolete lifecycle makes it a legacy choice. Consider the MAX3221IPWG4 when it is listed as available and its manufacturer documentation confirms the required pin functions, electrical limits, and protection requirements. Do not substitute multi-channel transceivers, SOIC-package devices, or charge-pump variants without a PCB redesign. For a new design, prioritize lifecycle status and verify a complete manufacturer pinout, capacitor network, and supply compatibility before release.

Comparaison avec les alternatives

Paramètre Ce produit MAX3221IPWG4
Brand Texas Instruments Texas Instruments
Package 16-pin TSSOP 16-pin TSSOP
Device Type Single-channel RS-232 transceiver Single-channel RS-232 transceiver
Number of Drivers 1 1
Number of Receivers 1 1
Supply Voltage Range 3V to 5.5V 3V to 5.5V
Maximum Data Rate 250kbps 250kbps
Lifecycle Status Obsolete Available for listing

Principaux différenciateurs

  • Enhanced RS-232-pin ESD protection (vs MAX3221IPWG4)
  • Obsolete versus available lifecycle state (vs MAX3221IPWG4)
  • Single-channel RS-232 integration (vs MAX3221IPWG4)

Notes de conception

Place the four charge-pump capacitors close to their associated MAX3221EIPWG4 pins and use short, low-impedance traces. Keep the charge-pump return current out of sensitive analog and signal-reference paths by providing a continuous ground plane and minimizing loop area. Confirm the capacitor footprint and polarity against the manufacturer datasheet rather than deriving it from a generic TSSOP layout.

Do not treat the ±15kV ESD rating as unrestricted protection for the entire board. The rating applies to the specified RS-232 pins, while power, logic, and connector paths may require separate protection. Also verify that the replacement retains the required supply range, data rate, pin functions, and temperature grade before treating it as a drop-in substitute for the obsolete MAX3221EIPWG4.

Route the RS-232 driver output and receiver input away from clock, ADC, and other sensitive nodes, and connect the connector-side return to the board ground through a deliberate path. The RS-232 driver generates a large voltage swing through the charge-pump network, so keeping that current loop compact reduces coupling into adjacent circuitry. Preserve the manufacturer’s recommended capacitor placement and avoid long stubs.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The manufacturer identifies IEC 61000-4-2 and TIA/EIA-232-F interface requirements, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact MPN.

Données vérifiées le : 2026-11-09 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

MAX3221EIPWG4 datasheet MAX3221EIPWG4 datasheet pdf MAX3221EIPWG4 pinout MAX3221EIPWG4 equivalent MAX3221EIPWG4 replacement MAX3221EIPWG4 cross reference MAX3221EIPWG4 vs MAX3221IPWG4 MAX3221EIPWG4 16-TSSOP MAX3221EIPWG4 250kbps RS-232 Texas Instruments MAX3221EIPWG4 MAX3221EIPWG4 price MAX3221EIPWG4 stock MAX3221EIPWG4 obsolete replacement

Composants & termes associés

Texas Instruments MAX3221EIPWG4 MAX3221IPWG4 RS-232 RS-232 transceiver line driver line receiver interface IC single-supply transceiver charge pump TIA/EIA-232-F IEC 61000-4-2 ESD protection 16-pin TSSOP TSSOP family surface mount SMD package 250kbps data rate 3V to 5.5V supply industrial temperature range asynchronous serial communication obsolete component charge-pump capacitor logic-level to RS-232 conversion
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ