MAX3221EIPWG4 - 250kbps Single RS-232 Transceiver | TI
MPN: MAX3221EIPWG4 ✗ Tapus ng BuhayMAX3221EIPWG4 Ulas
An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and the voltage-domain signals used by RS-232 equipment. The MAX3221E belongs to the line-driver and receiver hierarchy, converts one transmit and one receive channel, and uses an on-chip charge pump with four external capacitors to generate the bipolar voltage required for RS-232 transmission.
The device supports 3V to 5.5V operation and data rates up to 250kbps. Its ±15kV ESD protection applies to the RS-232 pins and helps protect the interface when cables are connected or disconnected. According to the manufacturer product page, the MAX3221 family meets TIA/EIA-232-F requirements, while the MAX3221E description identifies IEC 61000-4-2 ESD protection on the RS-232 pins.
Typical uses include industrial serial-port equipment, data acquisition systems, embedded controllers, test and measurement instruments, and service interfaces that communicate through legacy RS-232 links. The single-channel architecture is appropriate when only one physical RS-232 channel is required and board area is more important than multi-channel integration. The 16-pin TSSOP supports compact surface-mount layouts, but its gull-wing leads require adequate spacing between the device and surrounding circuitry.
The MAX3221EIPWG4 is marked obsolete and is no longer manufactured. New designs should confirm the lifecycle status of the selected replacement and compare its pinout, supply range, data rate, ESD rating, and charge-pump capacitor requirements before release. The obsolete status also makes obsolete-part sourcing, traceability, and long-term availability important procurement considerations.
This page combines the manufacturer’s electrical specifications, lifecycle information, package details, application guidance, and a strict drop-in comparison framework. For a production redesign, verify the complete pin description and capacitor values in the manufacturer datasheet, then confirm supply-chain status using the Request a Quote form on this page before committing the component to a new PCB revision.
Mga alternatibo na pwedeng ilagay na MAX3221EIPWG4 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
MAX3221IPWG4
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MAX3221EIPWG4 Mga Spesipikasyon
| Product Type | Single-channel RS-232 line transceiver |
| Number of Drivers | 1 |
| Number of Receivers | 1 |
| Supply Voltage Range | 3V to 5.5V |
| Maximum Data Rate | 250kbps |
| RS-232 Pin ESD Protection | ±15kV |
| ESD Qualification | IEC 61000-4-2 |
| RS-232 Compliance | TIA/EIA-232-F |
| External Charge-Pump Capacitors | 4 |
| Packhaging | 16-pin TSSOP |
| Terminal Count | 16 |
| Uri ng Pagpapasok | Surface mount |
| Terminal Form | Gull wing |
| Hanay ng Temperature na Operasyon | -40°C to +85°C |
| Temperature Grade | Industrial |
| Katayuan ng Lifecycle | Obsolete |
Gabay sa Pin Configuration ng MAX3221EIPWG4 16-pin tssop
Pin configuration para sa MAX3221EIPWG4 (16-pin tssop package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa MAX3221EIPWG4.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MAX3221EIPWG4 ay nararapat para sa 6 aplikasyons: Industrial Serial-Port Control, Embedded Data-Acquisition Interface, Test and Measurement Equipment, Legacy Equipment Maintenance, RS-232 Configuration and Service Port, Point-to-Serial Equipment Link.
Industrial Serial-Port Control
The MAX3221EIPWG4 fits a legacy industrial controller that must communicate through one RS-232 port at rates up to 250kbps. Its single driver and receiver provide the required bidirectional logic-to-RS-232 conversion from a 3V to 5.5V supply, while ±15kV ESD protection on the RS-232 pins adds useful protection for a connector subject to cable insertion and removal. The -40°C to +85°C industrial temperature range supports factory equipment, although the exact obsolete MPN should be reserved for designs where lifecycle continuity or traceability outweigh the availability of a newer supported device.
Inirekomenda
Embedded Data-Acquisition Interface
A data-acquisition controller can use the MAX3221EIPWG4 to connect a 3V or 5V logic domain to a single RS-232 instrument port. The device supports communication rates up to 250kbps and converts logic-level driver input and receiver output to and from RS-232 levels. Its ±15kV protection on the external RS-232 pins is valuable in laboratory and industrial environments where the cable connector may be exposed to electrostatic discharge. The charge-pump network must use the values and placement guidance in the manufacturer datasheet.
Inirekomenda
Test and Measurement Equipment
The MAX3221EIPWG4 is appropriate for a single-port service or control interface on test and measurement equipment. A 250kbps maximum data rate supports typical low-speed command traffic, while the 3V to 5.5V supply range allows use with either 3.3V or 5V controller systems. The ±15kV RS-232-pin ESD protection helps the interface withstand charged cable contact, and the industrial -40°C to +85°C range supports demanding equipment. For new platforms, compare a currently supported transceiver before committing the obsolete MPN to a long production lifecycle.
Inirekomenda
Legacy Equipment Maintenance
The MAX3221EIPWG4 is useful when repairing or extending equipment that already contains this obsolete 16-pin TSSOP transceiver. Its one-driver, one-receiver configuration matches a legacy single-port RS-232 architecture, and its 250kbps rate and 3V to 5.5V operating range cover the original interface class. Pin-compatible continuity is essential, so compare the MAX3221IPWG4 candidate against the exact schematic and manufacturer datasheet before substituting. Traceability and remaining inventory should be addressed when requesting a quotation.
Inirekomenda
RS-232 Configuration and Service Port
A configuration port on an embedded appliance can use the MAX3221EIPWG4 when the system already specifies this device and requires one RS-232 channel. The transceiver operates from 3V to 5.5V and supports command traffic up to 250kbps, while its external ESD rating is particularly relevant to a service connector accessible during installation. Keep the charge-pump capacitors close to the IC and provide a low-impedance ground plane to limit switching-current paths. Because the exact MPN is obsolete, a lifecycle review should determine whether an available pin-compatible part is preferable.
Inirekomenda
Point-to-Serial Equipment Link
The MAX3221EIPWG4 can serve as the interface between two legacy RS-232 systems when only one channel is required. Its separate transmit and receive paths support full-duplex operation, and the 250kbps rate is sufficient for many configuration, monitoring, and short command exchanges. Operating from 3V to 5.5V permits integration with both 3.3V and 5V control electronics. The ±15kV RS-232-pin protection improves robustness at the connector, but ESD protection does not replace correct grounding, cable routing, or system-level surge protection.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MAX3221EIPWG4 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MAX3221IPWG4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 16-pin TSSOP | 16-pin TSSOP |
| Device Type | Single-channel RS-232 transceiver | Single-channel RS-232 transceiver |
| Number of Drivers | 1 | 1 |
| Number of Receivers | 1 | 1 |
| Supply Voltage Range | 3V to 5.5V | 3V to 5.5V |
| Maximum Data Rate | 250kbps | 250kbps |
| Lifecycle Status | Obsolete | Available for listing |
Pangunahing mga Pagkakaiba
- Enhanced RS-232-pin ESD protection (kumpara saMAX3221IPWG4)
- Obsolete versus available lifecycle state (kumpara saMAX3221IPWG4)
- Single-channel RS-232 integration (kumpara saMAX3221IPWG4)
Talaan ng Disenyo
Place the four charge-pump capacitors close to their associated MAX3221EIPWG4 pins and use short, low-impedance traces. Keep the charge-pump return current out of sensitive analog and signal-reference paths by providing a continuous ground plane and minimizing loop area. Confirm the capacitor footprint and polarity against the manufacturer datasheet rather than deriving it from a generic TSSOP layout.
Do not treat the ±15kV ESD rating as unrestricted protection for the entire board. The rating applies to the specified RS-232 pins, while power, logic, and connector paths may require separate protection. Also verify that the replacement retains the required supply range, data rate, pin functions, and temperature grade before treating it as a drop-in substitute for the obsolete MAX3221EIPWG4.
Route the RS-232 driver output and receiver input away from clock, ADC, and other sensitive nodes, and connect the connector-side return to the board ground through a deliberate path. The RS-232 driver generates a large voltage swing through the charge-pump network, so keeping that current loop compact reduces coupling into adjacent circuitry. Preserve the manufacturer’s recommended capacitor placement and avoid long stubs.
Impormasyon ng Pagsunod sa Kautusan
The manufacturer identifies IEC 61000-4-2 and TIA/EIA-232-F interface requirements, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact MPN.