Texas Instruments

MAX3232CPWE4 2/2 RS-232 Transceiver, 16-TSSOP | Texas Instruments

Référence : MAX3232CPWE4 ✓ Actif
3 V to 5.5 V Vdss TIA/EIA-232-F and ITU V.28 Rds(on) 16-TSSOP, 0.173 in / 4.40 mm width Package
MOQ : 1 |

MAX3232CPWE4 Présentation

Texas Instruments MAX3232CPWE4 is a 2/2 RS-232 line transceiver with a 3 V to 5.5 V supply, operation up to 250 kbit/s, and a 16-pin TSSOP package. It combines two RS-232 drivers and two receivers on one IC, making it suitable for compact bidirectional serial interfaces. The MAX3232 family uses charge-pump voltage conversion to generate the RS-232 level-shift voltages required by a single low-voltage supply.

An RS-232 transceiver is an interface IC that bridges logic-level signals and the voltage ranges used by RS-232 links. The line-driver section converts low-voltage logic signals into RS-232 levels, while the receiver section converts incoming RS-232 signals into CMOS-compatible logic. Within the broader hierarchy, this device is a physical-layer interface IC, a multichannel line transceiver, and a semiconductor for data communications and industrial-control equipment.

The main operating characteristics are a 3 V to 5.5 V single-supply range, two drivers, two receivers, and data rates up to 250 kbit/s. The manufacturer datasheet also identifies ±15 kV human-body-model ESD protection. These characteristics make the device useful where legacy RS-232 equipment must coexist with low-voltage UART, microcontrollers, industrial controllers, and service equipment.

The MAX3232 architecture supports operation from a supply as low as 3 V without requiring a separate 12 V RS-232 supply. Internal charge-pump circuitry develops the bipolar voltage needed by the drivers, while the receiver inputs include ESD protection. This integration simplifies board design while retaining the signaling behavior required by TIA/EIA-232-F and ITU V.28 applications described for the device.

Typical uses include service-console connections, configuration interfaces on industrial equipment, point-of-sale terminals, security systems, and instrumentation. Two channels can support simultaneous transmit and receive activity, while dual receiver channels are useful for systems requiring one transmit line and two receive lines or a second unidirectional channel.

When laying out the circuit, keep charge-pump and interface-capacitor connections short, provide the required supply and bypass capacitance, and route connector-side signals away from sensitive logic. Confirm pin availability, input and output logic levels, and RS-232 lead lengths against the manufacturer pin-description table before finalizing a PCB footprint.

This product page combines the exact ordering information, electrical limits, package data, qualified alternatives, comparison parameters, and practical interface-layout guidance needed to evaluate the MAX3232CPWE4 as a drop-in candidate for an existing 16-pin TSSOP design.

Alternatives de remplacement direct pour MAX3232CPWE4 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec MAX3232CPWE4 (même facteur de forme et même empreinte) — différant par Maximum Data Rate, Package, Supply Voltage Range.

Maxim Integrated
Maximum Data Rate: 1 Mbps
Package: 16-pin TSSOP
Supply Voltage Range: 3.0 V to 5.5 V
Comparer avec MAX3232CPWE4 →

MAX3232IPWR

✅ Remplacement direct
Texas Instruments
📦 16-TSSOP
Dual RS-232 line driver and receiver · 2 channels · 2 channels · 3V to 5.5V · 250kbit/s · ±15kV · 5V logic · 0.1µF

Contactez-nous pour le prix

Voir la fiche technique →

MAX3232CUE+

✅ Remplacement direct
Maxim Integrated
📦 16-TSSOP
2/2 RS-232 transceiver · 3.0 V to 5.5 V · 1 Mbps · 2 · 2 · TTL/CMOS · Dual · 4 capacitors, 0.1 µF each

Contactez-nous pour le prix

Voir la fiche technique →

MAX3232CWEY

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 16-TSSOP
Same MAX3232 2/2 RS-232 interface family with suffix-defined temperature grade and packaging; core supply and speed differences are no greater than 30%.

📋 Alternative de référence (hors catalogue)

MAX3232CWEZ

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 16-TSSOP
Same MAX3232 2/2 RS-232 interface family with suffix-defined temperature grade and shipping format; core electrical differences are no greater than 30%.

📋 Alternative de référence (hors catalogue)

ICL3232EIV-16Z

✅ Remplacement direct
📦 16-TSSOP
Cross-brand RS-232 transceiver with the same 16-TSSOP package and two-channel transceiver class; internal enable and electrical details may differ by up to 30%.

📋 Alternative de référence (hors catalogue)

MAX3232CPWE4 Spécifications

Product Type 2/2 RS-232 line transceiver
Number of Drivers 2
Number of Receivers 2
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbit/s
Interface Standard RS-232
ESD Protection ±15 kV using the human-body model
Boîtier 16-TSSOP, 0.173 in / 4.40 mm width
Number of Terminals 16
Type de montage Surface mount
Terminal Form Gull wing
Package Shape Rectangular
Temperature Grade Commercial
Packaging Tube
Standards Compliance TIA/EIA-232-F and ITU V.28

Guide de configuration des broches du MAX3232CPWE4 rectangular

Configuration des broches du MAX3232CPWE4 (boîtier rectangular). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier rectangular pour le MAX3232CPWE4

Aucune donnée de brochage détaillée disponible pour MAX3232CPWE4.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

MAX3232CPWE4 convient pour 6 applications: Industrial Configuration Port, Serial Service Console, Point-of-Sale Terminal, Security and Access-Control Equipment, Test and Measurement Instrument, Building Access and Lighting Controller.

🏭

Industrial Configuration Port

The MAX3232CPWE4 fits a compact industrial configuration interface because it combines two drivers and two receivers while operating from 3 V to 5.5 V. It supports asynchronous links up to 250 kbit/s, allowing the controller to exchange commands with a service terminal through an RS-232 connector. Its ±15 kV human-body-model ESD protection is valuable on connector-facing equipment. Keep the interface and charge-pump capacitors close to the device, and verify that the industrial temperature range and grounding strategy meet the enclosure’s requirements.

🔧

Serial Service Console

A MAX3232CPWE4 can bridge a low-voltage controller UART to a legacy RS-232 service port without a separate 12 V supply. The 3 V minimum supply supports modern embedded systems, while the 250 kbit/s capability exceeds the throughput of most configuration consoles. Two drivers and two receivers also permit separate command and diagnostic paths where wiring permits. Use short connector-side traces, a solid ground reference, and protection appropriate to the exposed port environment.

🖥️

Point-of-Sale Terminal

The MAX3232CPWE4 is appropriate for a point-of-sale terminal that retains an RS-232 peripheral interface. A 3 V to 5.5 V operating range allows the interface to share power with efficient embedded logic, and 250 kbit/s supports legacy serial scanners, receipt devices, or customer displays. The integrated 2/2 channel arrangement reduces external driver count. Confirm logic polarity and connector pin assignment against the peripheral manual, and place ESD protection and bypass capacitance near their respective connections.

🔐

Security and Access-Control Equipment

A MAX3232CPWE4 can provide the legacy RS-232 link used by access-control panels, card readers, or alarm interfaces during installation and maintenance. The device’s low-voltage operation suits controller boards based on modern mixed-signal processors, and its ESD protection helps reduce risk at an externally accessible connector. The 16-TSSOP package supports compact board layouts, while two drivers and two receivers provide flexible point-to-point connectivity. Validate the ground reference, cable length, and surge requirements for the installation environment.

📟

Test and Measurement Instrument

The MAX3232CPWE4 is useful in test and measurement equipment that accepts legacy RS-232 commands from a host computer. Its 250 kbit/s maximum rate is suitable for ordinary asynchronous instrument-control traffic, and operation from 3 V to 5.5 V simplifies integration with low-voltage control hardware. Two channels can serve separate receive and status lines. Route the RS-232 traces away from sensitive analog sections, preserve the recommended bypass network, and verify receiver thresholds for the connected test system.

💡

Building Access and Lighting Controller

The MAX3232CPWE4 can support RS-232 commissioning or supervisory links in building-access and lighting-control modules. The 3 V to 5.5 V supply range fits low-energy embedded controllers, and the 250 kbit/s limit is more than sufficient for configuration traffic. Two receiver channels can monitor equipment status or accept inputs from multiple unidirectional sources. Keep the interface ground close to the transceiver ground, avoid long parallel routes next to switching circuitry, and verify all numbered pins before adapting an existing 16-TSSOP board.

What is the MAX3232CPWE4?
The MAX3232CPWE4 is a Texas Instruments 2/2 RS-232 transceiver combining two line drivers and two receivers in a 16-pin TSSOP package. According to the manufacturer datasheet, it operates from a 3 V to 5.5 V supply and supports data rates up to 250 kbit/s. The device is intended for asynchronous RS-232 interfaces using a single low-voltage supply.
What are the key specifications of MAX3232CPWE4?
The principal MAX3232CPWE4 specifications are a 3 V to 5.5 V operating supply, two drivers, two receivers, a maximum data rate of 250 kbit/s, and ±15 kV human-body-model ESD protection. It is packaged in a 16-TSSOP with a 4.40 mm body width. These parameters position it for compact, low-voltage RS-232 equipment interfaces.
Where can I download the MAX3232CPWE4 datasheet PDF?
The MAX3232CPWE4 datasheet PDF is available through the linked datasheet page and the Texas Instruments product literature. It is titled “MAX3232 3-V to 5.5-V Multichannel RS-232 Line Driver/Receiver.” Use the manufacturer pin-description table and electrical-characteristics tables to verify connector-side levels, supply limits, charge-pump capacitors, and timing before releasing a PCB design.
Where can I find the MAX3232CPWE4 pinout?
The MAX3232CPWE4 pinout is published in the manufacturer datasheet’s pin-description table for the 16-TSSOP package. Use that table when assigning driver outputs, receiver inputs, supply pins, ground connections, and charge-pump capacitor terminals. The web results identify a 16-terminal gull-wing TSSOP, but they do not provide a complete numbered pin description suitable for reproducing the pin map.
Can MAX3232CPWE4 replace a 5 V RS-232 transceiver?
The MAX3232CPWE4 can serve as a replacement candidate for a 5 V RS-232 transceiver when the original device also has two drivers, two receivers, a compatible 16-TSSOP footprint, and a data rate of 250 kbit/s or lower. Before replacing it, verify logic thresholds, receiver enable behavior, charge-pump capacitor values, ESD ratings, and the complete numbered pinout.
Is MAX3232CPWE4 suitable for industrial equipment?
The MAX3232CPWE4 is suitable for industrial equipment when the interface operates within the device’s 3 V to 5.5 V supply range and 250 kbit/s data-rate limit. Its ±15 kV human-body-model ESD protection is useful for connector-facing ports, but industrial suitability also depends on the required temperature grade, isolation, surge protection, and regulatory environment. Confirm those conditions in the manufacturer datasheet.
What is the MAX3232CPWE4 vs MAX3232IPWR difference?
The MAX3232IPWR is a closely related MAX3232 RS-232 transceiver with two drivers, two receivers, a 3 V to 5.5 V supply, and operation up to 250 kbit/s. The ordering-code differences include temperature grade and shipping format, but the provided search results do not expose a full comparison. Confirm the exact suffix, package, temperature range, and pin compatibility before substitution.
What is the MAX3232CPWE4 vs ICL3232EIV-16Z difference?
The MAX3232CPWE4 and ICL3232EIV-16Z are both multichannel RS-232 interface devices associated with 16-pin TSSOP-style packaging. The available comparison identifies ICL3232EIV-16Z as a candidate, but it does not provide complete operating-limit or pin-mapping details. Treat it as a drop-in candidate only after checking driver and receiver counts, supply range, data rate, enable pins, and every numbered connection.
When should I choose MAX3232CPWE4 over MAX3232IPWR?
Choose MAX3232CPWE4 when its exact commercial temperature grade and tube packaging match the intended production process. Consider MAX3232IPWR when its suffix provides a preferred temperature grade or reel-based logistics arrangement while retaining the same electrical interface. The decision should follow a full pinout, supply, speed, and temperature comparison rather than package name alone.
Is MAX3232CPWE4 the same as MAX3232CUE+?
The MAX3232CPWE4 and MAX3232CUE+ are related MAX3232 RS-232 transceiver orderings, but suffix codes can change package, temperature grade, or shipping method. The MAX3232CPWE4 is identified specifically as a commercial-grade 16-TSSOP supplied in a tube. Check the ordering table and numbered pin descriptions before treating MAX3232CUE+ as interchangeable.
What can replace MAX3232CPWE4?
The strongest replacement candidates are the MAX3232IPWR, MAX3232CUE+, and ICL3232EIV-16Z, subject to exact pin verification. A valid drop-in replacement must preserve the 16-pin TSSOP footprint, two-driver and two-receiver configuration, 3 V to 5.5 V supply range, and required data rate. The search results support candidate status, but final substitution requires a manufacturer pin-by-pin review.
What is the best drop-in replacement for MAX3232CPWE4?
The MAX3232IPWR is the most direct same-family replacement candidate because it is identified as a two-channel MAX3232 RS-232 transceiver with the same 250 kbit/s and 3 V to 5.5 V operating classes. Before installation, verify the numbered pinout, temperature grade, package orientation, enable functions, and capacitor requirements because the search snippets do not establish every suffix-level difference.
Where can I buy MAX3232CPWE4 online?
Use the “Request a Quote” form on this page to request MAX3232CPWE4 availability, current commercial terms, and the required quantity. The form routes the request through XAIPART without embedding a stale price or unconfirmed stock statement. Include the target quantity, tube-packaging requirement, date code preference, and any acceptable alternative suffix in the request.
What is the price of MAX3232CPWE4?
Submit the MAX3232CPWE4 “Request a Quote” form on this page for the current unit pricing and volume-break terms. Pricing is rendered from live sourcing information rather than copied into static page text because transaction values can change. Include the required quantity, packaging preference, and any temperature-grade or lead-time constraints with the request.
What is the lead time for MAX3232CPWE4?
The current MAX3232CPWE4 lead time should be confirmed through the “Request a Quote” form on this page. One listing identifies a five-piece-lot quantity but marks the lead time as requiring confirmation, so it should not be treated as a guaranteed schedule. Provide your required quantity and target delivery date to obtain a committed quotation.
Is MAX3232CPWE4 in stock?
Stock for MAX3232CPWE4 should be confirmed through the “Request a Quote” form on this page at the time of your order. The part is currently offered by multiple authorized listings, but that does not guarantee a particular lot, date code, or quantity is reserved for your build. State the required quantity and tube-packaging preference in the request.

Données de référence d'ingénierie pour MAX3232CPWE4 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the MAX3232CPWE4 when the design needs a commercial-grade, two-driver and two-receiver RS-232 interface in a 16-TSSOP package, operates from 3 V to 5.5 V, and communicates at no more than 250 kbit/s. Consider MAX3232IPWR when its suffix-specific temperature grade or reel packaging better fits the assembly process. MAX3232CUE+, MAX3232CWEY, and MAX3232CWEZ remain same-family candidates whose temperature, packing, and lifecycle attributes should be checked. ICL3232EIV-16Z is a cross-brand candidate for a footprint-compatible redesign, but its exact supply limits, enable logic, pin mapping, and ESD rating require direct comparison. For any replacement, verify all 16 numbered connections, external charge-pump capacitors, logic thresholds, data rate, grounding, and connector protection before production release.

Comparaison avec les alternatives

Paramètre Ce produit MAX3232IPWR MAX3232CUE+ MAX3232CWEY MAX3232CWEZ ICL3232EIV-16Z
Package 16-TSSOP 16-TSSOP 16-TSSOP 16-TSSOP 16-TSSOP 16-TSSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Renesas Electronics
Transceiver Configuration 2/2 full RS-232 transceiver 2/2 RS-232 transceiver 2/2 MAX3232-family transceiver 2/2 MAX3232-family transceiver 2/2 MAX3232-family transceiver 2/2 RS-232 transceiver

Principaux différenciateurs

  • Two integrated drivers and receivers (vs MAX3232IPWR)
  • Single-supply RS-232 operation (vs ICL3232EIV-16Z)
  • Connector-facing ESD protection (vs MAX3232CUE+)

Notes de conception

Place the charge-pump capacitors and supply bypass capacitors close to their numbered IC pins, following the manufacturer’s typical application circuit. Keep connector-side driver and receiver traces short, provide a continuous ground reference, and avoid routing them beneath switching nodes or noisy clock lines. The 16-TSSOP footprint leaves little room for long point-to-point connections, so assign the external network before placing the connector.

RS-232 links are point-to-point interfaces, and the 250 kbit/s rating should not be treated as a guarantee for arbitrary cable lengths. Match the line impedance with the selected transceiver, maintain a suitable ground reference, and avoid excessive stub lengths. When replacing the MAX3232CPWE4, verify receiver enable levels, driver polarity, input thresholds, and charge-pump capacitor values rather than relying on the 16-pin package alone.

Do not substitute solely by package outline or driver count. The suffix can define temperature grade, reel or tube packing, and ordering options. Before approving MAX3232IPWR, MAX3232CUE+, or ICL3232EIV-16Z, compare every numbered pin, supply limits, receiver enable behavior, ESD rating, maximum data rate, and external capacitor requirements against the original design.

The MAX3232’s internal charge-pump circuitry can couple energy into surrounding traces if the capacitor network is not placed carefully. Use the shortest permitted capacitor connections, place input and output bypass components near the device, and maintain separation between RS-232 connector paths and sensitive analog or high-speed digital nets. A common ground plane and controlled return-current path are important when the interface cable leaves the enclosure.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The manufacturer datasheet information identifies ±15 kV human-body-model ESD protection and TIA/EIA-232-F and ITU V.28 compliance. No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was present in the cited product records.

Données vérifiées le : 2026-11-09 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

MAX3232CPWE4 datasheet MAX3232CPWE4 pinout MAX3232CPWE4 datasheet pdf MAX3232CPWE4 specifications MAX3232CPWE4 16-TSSOP Texas Instruments MAX3232CPWE4 MAX3232CPWE4 RS-232 transceiver MAX3232CPWE4 equivalent MAX3232CPWE4 replacement MAX3232CPWE4 vs MAX3232IPWR MAX3232CPWE4 price MAX3232CPWE4 stock MAX3232CPWE4 footprint MAX3232CPWE4 application circuit

Composants & termes associés

Texas Instruments MAX3232CPWE4 MAX3232IPWR MAX3232CUE+ MAX3232CWEY MAX3232CWEZ ICL3232EIV-16Z RS-232 transceiver line driver line receiver interface IC physical-layer interface semiconductor TIA/EIA-232-F ITU V.28 ESD protection human-body model charge-pump voltage conversion UART 3 V to 5.5 V supply 250 kbit/s 16-TSSOP TSSOP package family surface-mount technology
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ