MAX3243ECWI+ - 3V to 5.5V RS-232 Transceiver | Maxim
Référence : MAX3243ECWI+ ✓ ActifMAX3243ECWI+ Présentation
An RS-232 transceiver is an interface IC that combines line drivers, also called transmitters, and line receivers. The MAX3243 family provides three driver outputs and five receiver inputs in one package, allowing several serial ports or multiple logic signals to share a compact RS-232 interface. The MAX3243ECWI+ is intended for industrial, instrumentation, communications, and embedded-control equipment.
Key features include a 3.0V to 5.5V operating supply range, 1 uA supply current in shutdown mode, 120 kb/s data-rate capability in the comparison data, and integrated ESD protection rated to 15 kV. AutoShutdown functionality helps reduce system power consumption when the RS-232 interface is not required. The 28-pin SOIC package is a standard surface-mount industrial package.
The device uses RS-232 line signaling to translate digital logic levels into differential bipolar voltage levels and back again. The three transmitters support point-to-point serial links, while the five receivers can monitor incoming data or accept additional RS-232 signals. The integrated protection circuitry is particularly useful in industrial environments where cable-connected ports can be exposed to electrostatic discharge.
Typical applications include multi-port RS-232 equipment, test and measurement instruments, data acquisition systems, industrial controllers, and embedded serial interfaces. The MAX3243ECWI+ is appropriate when one board needs more than a single RS-232 transmitter and receiver while keeping the power supply below 5.5V.
For implementation, verify the supply voltage, confirm that the transceiver is enabled or disabled according to the system power sequence, and provide the required external charge-pump capacitors recommended by the manufacturer datasheet. Place protection and signal-routing components close to the connector and the transceiver to minimize ESD current paths.
Alternatives de remplacement direct pour MAX3243ECWI+ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
MAX3243ECWI
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
SP3243EHCA-L/TR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MAX3243ECWI+ Spécifications
| Product Type | RS-232 transceiver |
| Supply Voltage Range | +3.0V to +5.5V |
| Number of Transmitters | 3 |
| Number of Receivers | 5 |
| Duplex Type | Full duplex |
| ESD Protection | 15 kV |
| Débit de données | 120 kb/s |
| Shutdown Supply Current | 1 uA |
| AutoShutdown | Yes |
| Boîtier | 28-pin SOIC |
| Package Code | SOP |
| Terminal Count | 28 |
| Type de montage | Surface mount |
| Temperature Grade | Commercial |
Guide de configuration des broches du MAX3243ECWI+ sop
Configuration des broches du MAX3243ECWI+ (boîtier sop). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour MAX3243ECWI+.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MAX3243ECWI+ convient pour 6 applications: Multi-Port Industrial RS-232 Interface, Test and Measurement Instrumentation, Data Acquisition and Control Equipment, Embedded Serial Communication Hub, Service and Configuration Port, Low-Voltage RS-232 Gateway.
Multi-Port Industrial RS-232 Interface
The MAX3243ECWI+ fits multi-port industrial equipment because one 28-pin SOIC provides three RS-232 transmitters and five receivers instead of requiring separate single-channel devices. Its 3.0V to 5.5V operating range supports both 3.3V and 5V control systems, while 15 kV ESD protection adds resilience at externally accessible connectors. Place the transceiver close to the connector, route protected lines directly to the relevant pins, and keep the charge-pump components on short, clean paths. The benefit is reduced board area and component count without sacrificing the channel count needed for configuration, diagnostics, and service interfaces.
Recommandé
Test and Measurement Instrumentation
The MAX3243ECWI+ is useful in test and measurement instruments that must communicate through several RS-232 ports. Three transmitter channels can control instruments or peripherals, while five receiver channels can acquire status and response data without requiring five separate receiver packages. Operation from a 3.0V to 5.5V supply lets the transceiver share either a legacy 5V rail or a modern 3.3V system rail. The listed 15 kV ESD protection is especially relevant for benchtop equipment connected to user-accessible cables. Maintain a controlled ground reference between connected equipment and follow the manufacturer capacitor recommendations for reliable charge-pump operation.
Recommandé
Data Acquisition and Control Equipment
The MAX3243ECWI+ supports data-acquisition systems that combine command outputs with multiple status inputs. Its three transmitters can send commands to external controllers, and five receivers can read acknowledgements, interlocks, sensor states, or diagnostic signals. The 120 kb/s data-rate listing is suitable for moderate-speed supervisory communication, while the 3.0V to 5.5V supply range accommodates mixed-generation embedded hardware. AutoShutdown can lower consumption during idle intervals, and the 1 uA shutdown current helps battery-powered field equipment. Validate cable length, grounding, and signal integrity for the installed RS-232 environment rather than assuming logic-level timing applies directly.
Recommandé
Embedded Serial Communication Hub
The MAX3243ECWI+ fits embedded serial communication hubs that must expose more than one legacy RS-232 port from a controller board. Three driver channels can connect to downstream equipment, while five receiver channels provide flexible input monitoring, and the 28-pin SOIC package remains easy to route on a conventional PCB. Its 3.0V to 5.5V compatibility supports direct operation from common embedded rails. AutoShutdown helps manage power when the serial subsystem is inactive. For robust implementations, assign unused channels deliberately, use the shutdown behavior intentionally, and place input and charge-pump paths away from clocks, switching converters, and high-current return paths.
Recommandé
Service and Configuration Port
The MAX3243ECWI+ can consolidate service, configuration, and diagnostic ports in industrial or communications equipment. A dedicated transmitter channel can carry service commands, additional transmitters can reach separate subsystems, and the five receiver inputs can collect equipment status without additional line-receiver ICs. The 15 kV ESD protection rating helps manage electrostatic exposure at service connectors, although connector-side protection remains important. The 3.3V-compatible supply range allows integration with modern logic. In a serviceable product, document channel assignments and shutdown states so maintenance personnel can interpret activity indicators and avoid simultaneous driver conflicts.
Recommandé
Low-Voltage RS-232 Gateway
The MAX3243ECWI+ is appropriate for a low-voltage gateway that bridges modern embedded electronics to multiple RS-232 devices. Three driver outputs support downstream equipment connections, while five receivers can capture incoming gateway or peripheral status. Its 1 uA shutdown current and AutoShutdown function improve power behavior in gateways that spend substantial time disconnected or idle. The 3.0V to 5.5V range also permits use in systems transitioning from 5V to 3.3V logic. Maintain defined signal grounds, avoid long unterminated branches, and check the manufacturer datasheet for external charge-pump capacitor values before release to production.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MAX3243ECWI+ — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MAX3243ECWI | SP3243EHCA-L/TR |
|---|---|---|---|
| Brand | Maxim Integrated | Maxim Integrated | MaxLinear |
| Package | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC |
| Product Type | RS-232 transceiver | 3/5 full RS-232 transceiver | RS-232 transceiver |
Principaux différenciateurs
- Integrated three-transmitter and five-receiver arrangement (vs SP3243EHCA-L/TR)
- Low-voltage operation for mixed-generation systems (vs SP3243EHCA-L/TR)
- Documented multi-channel protection and shutdown behavior (vs SP3243EHCA-L/TR)
Notes de conception
Place the MAX3243ECWI+ charge-pump capacitors close to their associated pins and keep the associated traces short. Route RS-232 connector lines directly toward the transceiver and away from clocks, switching-converter nodes, and sensitive analog inputs. The 15 kV ESD rating is an internal device feature, not a replacement for connector-side protection or a controlled chassis-to-chassis ground strategy.
The MAX3243ECWI+ supports a +3.0V to +5.5V supply and includes a 1 uA shutdown supply-current specification. Confirm the system rail, enable state, and charge-pump operating requirements in the manufacturer datasheet before power-up. If AutoShutdown is used for intermittent operation, verify that signal states at the connector cannot back-power the transceiver during shutdown.
Do not treat the three transmitters as interchangeable outputs without checking the pin descriptions and intended channel assignments. Avoid connecting more than one transmitter to the same RS-232 node, and provide the manufacturer-recommended charge-pump capacitors with the specified voltage and tolerance. When substituting a pin-compatible device, recheck shutdown timing, ESD rating, data rate, and capacitor values.
Informations de conformité
The available product and comparison information identifies a commercial-temperature surface-mount component, but definitive RoHS, REACH, lead-free, halogen-free, and conflict-minerals statuses require confirmation from the manufacturer or an authorized compliance document.