Maxim Integrated

MAX3388EEUG+ - 2.5V ESD-Protected RS-232 | Maxim

Référence : MAX3388EEUG+ ✓ Actif
2.5 V Vdss 24-pin TSSOP Package
MOQ : 1 |

MAX3388EEUG+ Présentation

The Maxim Integrated MAX3388EEUG+ is a 2.5V-powered, ±15kV ESD-protected RS-232 interface transceiver with three transmitters and two receivers in a 24-pin TSSOP package. It combines three driver channels and two receiver channels on one device, making it suitable for compact equipment that needs bidirectional serial communication but does not require the same number of transmit and receive lines.

An RS-232 transceiver is a semiconductor interface device that converts logic-level signals into RS-232 line levels and converts incoming RS-232 signals back into CMOS-compatible logic. The MAX3388EEUG+ supports EIA/TIA-232 and V.28/V.24 communications interfaces. Its low 2.5V supply design is particularly useful for portable equipment, personal digital assistants, and cellular-phone systems where power consumption and circuit area are important constraints.

The three transmitter and two receiver arrangement gives the device a 3/2 channel configuration. Additional standout characteristics include ±15kV ESD protection and operation from a 2.5V supply. These features help protect the interface pins when cables are connected, removed, or exposed to electrostatic discharge during handling. The MAX3388E family is also identified as providing high data-rate capability and low power requirements.

The 24-TSSOP package provides a surface-mount implementation with gull-wing terminals and a rectangular body. The industrial temperature grade makes the MAX3388EEUG+ appropriate for equipment operating across an industrial environment. Its three transmitters also allow a single package to support multiple outgoing RS-232 lines, reducing the number of interface components required on a board.

Typical applications include handheld and portable communication equipment, personal digital assistants, cellular-phone accessories, point-of-sale terminals, diagnostic equipment, and embedded serial-port systems. The two receiver channels can support two incoming signals while the three transmitter channels serve outbound links or status and control lines.

Designers should place required charge-pump and interface capacitors according to the manufacturer application circuit, maintain the specified supply range, and provide direct protection and layout measures for exposed cable connectors. The 24-pin TSSOP footprint is also sensitive to assembly and soldering practices, so the recommended land pattern and reflow profile should be followed.

This page organizes the RS-232 channel configuration, supply voltage, ESD rating, package information, drop-in replacement analysis, comparison parameters, and practical interface-layout guidance into one engineering-focused resource for component selection and PCB design.

Alternatives de remplacement direct pour MAX3388EEUG+ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec MAX3388EEUG+ (même facteur de forme et même empreinte) — différant par Interface Standard, Product Type.

Maxim Integrated
Interface Standard: EIA/TIA-232, RS-232
Product Type: 3/2 RS-232 transceiver
Comparer avec MAX3388EEUG+ →

MAX3388ECUG+

✅ Remplacement direct
Maxim Integrated
📦 24-pin TSSOP
3/2 RS-232 transceiver · 2.5 V · 460kbps · 15kV · 3 · 2 · EIA/TIA-232, RS-232 · V.28/V.24

Contactez-nous pour le prix

Voir la fiche technique →

MAX3388EEUG+ Spécifications

Product Type RS-232 transceiver
Transmitter Channels 3 channels
Receiver Channels 2 channels
Tension d'alimentation 2.5 V
ESD Protection ±15 kV
Communication Standard EIA/TIA-232
Interface Standard V.28/V.24
Operating Temperature Grade Industrial
Package Type 24-pin TSSOP
Terminal Count 24 terminals
Style de montage Surface mount
Terminal Form Gull wing
Package Shape Rectangular
Lead-Free Status Lead-free

Guide de configuration des broches du MAX3388EEUG+ rectangular

Configuration des broches du MAX3388EEUG+ (boîtier rectangular). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier rectangular pour le MAX3388EEUG+

Aucune donnée de brochage détaillée disponible pour MAX3388EEUG+.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

MAX3388EEUG+ convient pour 6 applications: Personal Digital Assistant Serial Port, Cellular Phone Accessory Interface, Point-of-Sale Terminal, Portable Diagnostic Equipment, Embedded Serial Communication System, Communication and Control Interface.

📱

Personal Digital Assistant Serial Port

The MAX3388EEUG+ fits a compact personal digital assistant that needs several outbound RS-232 signals and two inbound signals. Its three transmitters and two receivers provide a 3/2 channel arrangement without requiring separate driver and receiver packages. The 2.5V operating supply aligns with the low-voltage design direction used in portable equipment, while ±15kV ESD protection adds interface ruggedness for a frequently handled cable connection. Place the transceiver near the connector-side protection and follow the manufacturer application circuit for the charge-pump components.

📱

Cellular Phone Accessory Interface

The MAX3388EEUG+ is suitable for cellular-phone accessories requiring a low-voltage RS-232 communications path. Its 2.5V supply supports compact portable architectures, and the three transmitters can carry multiple outbound control or data signals while two receivers handle incoming communications or status information. The ±15kV ESD rating is valuable in cable-connected accessories where electrostatic discharge can occur during connection. Maintain short protected routes between the transceiver and connector and validate the external connector's own discharge requirements.

🖥️

Point-of-Sale Terminal

The MAX3388EEUG+ can support a point-of-sale terminal that communicates with peripheral equipment through multiple RS-232 ports. Three transmitter channels permit outbound command and control lines, while two receiver channels accept responses from peripherals, reducing component count compared with separate interface packages. The 24-pin TSSOP keeps the implementation surface-mount and compact. For countertop equipment exposed to user-handled cables, retain the transceiver's ±15kV ESD capability and use the manufacturer-recommended capacitor placement for reliable charge-pump operation.

🏭

Portable Diagnostic Equipment

The MAX3388EEUG+ is appropriate for portable diagnostic equipment that needs a flexible mix of outgoing and incoming RS-232 links. The asymmetric 3/2 configuration lets an instrument send commands or data on three channels and receive information on two, while operating from a 2.5V supply. Its industrial temperature designation supports industrial-oriented equipment, although the complete environmental requirements must still be checked. The ±15kV ESD protection helps reduce susceptibility to transients encountered when connecting diagnostic leads or service cables.

🔧

Embedded Serial Communication System

The MAX3388EEUG+ fits embedded systems requiring legacy RS-232 connectivity alongside modern low-voltage logic. Three drivers can support command, status, and alarm outputs, while two receivers can collect asynchronous responses from another subsystem. Its EIA/TIA-232 and V.28/V.24 support makes it appropriate for conventional point-to-point serial interfaces. The surface-mount 24-TSSOP package simplifies board integration, but the layout should preserve short interface routes and the manufacturer-specified charge-pump capacitor arrangement.

🌐

Communication and Control Interface

The MAX3388EEUG+ can divide an RS-232 interface into three communication or control outputs and two inputs within one package. This is useful when a controller must issue several commands while monitoring two return channels, and it can reduce board area compared with separate one-channel devices. The 2.5V supply supports low-voltage systems, while ±15kV ESD protection strengthens cable-facing circuitry. Validate logic levels, shutdown behavior, and grounding against the complete Maxim Integrated datasheet before finalizing a multi-drop or long-cable system.

What is the MAX3388EEUG+?
The MAX3388EEUG+ is a 2.5V-powered RS-232 transceiver containing three transmitters and two receivers in a 24-pin TSSOP package. According to the Maxim Integrated datasheet description, it implements EIA/TIA-232 and V.28/V.24 communications interfaces and provides ±15kV ESD protection. Its asymmetric 3/2 channel arrangement is useful when a system needs more outbound RS-232 lines than inbound lines.
What are the key specifications of MAX3388EEUG+ engineers should know?
The MAX3388EEUG+ combines a 2.5V supply, three RS-232 transmitters, two RS-232 receivers, ±15kV ESD protection, and a 24-pin TSSOP package. According to the Maxim Integrated datasheet listing, the device supports EIA/TIA-232 and V.28/V.24 interfaces and is intended for low-power, high-data-rate communications. These are the primary characteristics to evaluate when designing a compact serial interface.
How many RS-232 transmitters and receivers does MAX3388EEUG+ have?
The MAX3388EEUG+ has three RS-232 transmitters and two RS-232 receivers, giving it a 3/2 channel configuration. According to the Maxim Integrated product description, this arrangement can reduce the number of separate interface devices required by a board. It is especially suitable for systems with several outbound control or data lines but fewer inbound channels.
Is the MAX3388EEUG+ suitable for portable and battery-powered equipment?
The MAX3388EEUG+ is well suited to portable equipment because it operates from a 2.5V supply and was specifically marketed for PDAs and cellular phones. According to the Maxim Integrated datasheet description, the family also emphasizes low power requirements and high data-rate capability. The final battery-life design must additionally account for supply current and the load presented by the connected RS-232 system.
What ESD protection does MAX3388EEUG+ provide?
The MAX3388EEUG+ provides ±15kV ESD protection on its RS-232 interface. According to the Maxim Integrated datasheet listing, this enhanced electrostatic-discharge protection is intended for applications in which cables and connectors may be exposed to handling transients. The rating identifies the device family as ESD protected, but system designers should still use suitable connector-level protection where required.
Where can I download the MAX3388EEUG+ datasheet PDF?
The MAX3388EEUG+ datasheet PDF can be reached through the Maxim Integrated datasheet link listed on this page. According to the manufacturer document, the MAX3388E family is described as 2.5V-powered EIA/TIA-232 and V.28/V.24 communications interfaces with low power requirements, high data-rate capability, and enhanced ESD protection. Use the pin-description and application-circuit sections when assigning connections.
Where can I find the MAX3388EEUG+ pinout?
The numbered MAX3388EEUG+ pinout should be taken from the pin-description table in the Maxim Integrated datasheet and matched to the 24-pin TSSOP footprint. Because the complete pin assignments are not reproduced on this page, use the manufacturer package drawing to verify signal names, charge-pump connections, supply pins, and ground positions before laying out the PCB.
What is the difference between MAX3388EEUG+ and MAX3388ECUG+?
Both MAX3388EEUG+ and MAX3388ECUG+ are identified as 24-pin TSSOP RS-232 interface devices, and the cross-reference information describes the MAX3388ECUG+ as a complete replacement for the MAX3388EEUG+. The replacement should still be checked against the manufacturer ordering information, particularly the temperature grade and production suffix, before it is approved for a specific design.
What is the best drop-in replacement for MAX3388EEUG+?
The MAX3388ECUG+ is the closest documented drop-in alternative in the available cross-reference information. It uses the same TSSOP package and is described as having consistent terminals, packaging, and principal performance characteristics. Because the MAX3388EEUG+ carries an industrial temperature designation, verify that the replacement’s specified temperature range satisfies the target system requirements before production use.
Can MAX3388ECUG+ replace MAX3388EEUG+ without changing the PCB?
The MAX3388ECUG+ can generally replace the MAX3388EEUG+ without changing the PCB land pattern because both use a 24-pin TSSOP package and are described as pin and package compatible. According to the published comparison, their principal performance characteristics are consistent. Confirm the required temperature grade, supply range, and ordering suffix against the Maxim Integrated datasheet before releasing a new production build.
When should I choose MAX3388EEUG+ over MAX3388ECUG+?
Choose the MAX3388EEUG+ when the documented industrial temperature designation is important for the operating environment and the procurement suffix is specified by your design. The MAX3388ECUG+ is a package-compatible alternative with closely related characteristics, but a replacement should not be selected solely from its suffix. Compare the complete orderable part numbers and temperature requirements in the Maxim Integrated datasheet.
Is MAX3388EEUG+ suitable for PDA and cellular-phone interfaces?
Yes, the MAX3388EEUG+ is explicitly positioned as a 2.5V, ±15kV ESD-protected RS-232 transceiver for PDAs and cellular phones. According to the Maxim Integrated datasheet description, its low-power 2.5V operation suits compact portable systems. Board-level implementation still requires the manufacturer-recommended capacitors, exposed-pad or thermal layout where applicable, and protection appropriate to the connector environment.
How do I choose an RS-232 interface IC for a 24-TSSOP design?
For a 24-TSSOP RS-232 design, first verify the channel count, supply voltage, temperature range, ESD rating, and exact pin assignments. The MAX3388EEUG+ offers three transmitters, two receivers, a 2.5V supply, and ±15kV ESD protection. According to the Maxim Integrated datasheet, it supports EIA/TIA-232 and V.28/V.24 interfaces, making it appropriate when those electrical and footprint requirements match.
Where can I buy MAX3388EEUG+ online?
Use the Request a Quote form on this page to request MAX3388EEUG+ availability, order quantities, and current lead time. The product is a 24-pin TSSOP RS-232 transceiver with three transmitters, two receivers, a 2.5V supply, and ±15kV ESD protection. A formal quote confirms the exact suffix, package form, and delivery quantity for the intended build.
What is the current price of MAX3388EEUG+?
The current commercial terms for MAX3388EEUG+ are available through the Request a Quote form on this page. The form allows quantity and fulfillment requirements to be stated so the exact 24-pin TSSOP orderable part can be addressed without relying on a static price. Confirm the manufacturer suffix and packaging configuration as part of the quotation request.
What is the lead time and stock status for MAX3388EEUG+?
Request current stock status, minimum order quantity, and lead time through the Request a Quote form on this page. The MAX3388EEUG+ is specified as a 24-TSSOP device with three RS-232 transmitters and two receivers. Supply timing should be confirmed against the complete MPN, including its suffix, because package form and grade are ordering-relevant details.
Is MAX3388EEUG+ RoHS and REACH compliant?
The MAX3388EEUG+ is identified as a lead-free device, while a definitive RoHS and REACH status should be confirmed from the current manufacturer product or material-declaration documentation. According to the available lead-free product description, the MAX3388EEUG+ is suitable for lead-free manufacturing. Do not infer broader environmental declarations solely from the lead-free statement.
How should MAX3388EEUG+ be placed near an RS-232 connector?
Place the MAX3388EEUG+ close to the connector-side ESD protection and route each RS-232 line directly to its assigned transmitter or receiver pin. According to the Maxim Integrated interface guidance, the device is intended for enhanced ESD protection in portable cable-connected equipment. Keep the protected interface path short, maintain the recommended charge-pump capacitor placement, and separate sensitive logic from connector return currents.

Données de référence d'ingénierie pour MAX3388EEUG+ — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the MAX3388EEUG+ for a 2.5V RS-232 design that needs three transmit channels, two receive channels, a 24-pin TSSOP footprint, and ±15kV ESD-protected interfaces. It is particularly appropriate for portable PDA and cellular-phone equipment, compact diagnostic tools, and embedded systems requiring an asymmetric 3/2 channel arrangement. The MAX3388ECUG+ is the documented drop-in alternative when the same TSSOP footprint and closely matching electrical behavior are needed. Before substituting it, verify the complete ordering suffix, temperature grade, supply limits, and operating requirements because its suffix differs from the target. A MAX3389-family device should not be assumed to be interchangeable without a separate pin and channel-count review. For designs requiring a different package, channel ratio, supply voltage, or automotive qualification, use a dedicated RS-232 transceiver rather than forcing the MAX3388EEUG+ footprint.

Comparaison avec les alternatives

Paramètre Ce produit MAX3388ECUG+
Package 24-pin TSSOP 24-pin TSSOP
Brand Maxim Integrated Maxim Integrated
Product Type RS-232 transceiver RS-232 interface transceiver
Transmitter Channels 3 channels 3 channels
Receiver Channels 2 channels 2 channels
Supply Voltage 2.5 V 2.5 V
ESD Protection ±15 kV ±15 kV
Communication Standard EIA/TIA-232 and V.28/V.24 RS-232
Mounting Style Surface mount Surface mount
Lead-Free Status Lead-free Lead-free

Principaux différenciateurs

  • Three transmitters provide more outbound channels than receivers (vs MAX3388ECUG+)
  • Package-compatible replacement path (vs MAX3388ECUG+)
  • Low-voltage portable-device positioning (vs MAX3388ECUG+)

Notes de conception

Place the MAX3388EEUG+ between the RS-232 connector and the system logic, keeping each protected line as short and direct as practical. Follow the Maxim Integrated application circuit for charge-pump capacitor placement, and avoid routing connector-facing traces beneath noisy digital or switching-power nodes. Confirm all 24 pin assignments against the manufacturer pin-description table before releasing the layout.

RS-232 driver outputs are intentionally high-voltage, bipolar signals and should not be routed alongside sensitive analog or low-level clock inputs. Keep ground returns associated with each cable-facing interface continuous and evaluate the system grounding strategy with the ESD and connector circuitry in place. The MAX3388EEUG+ includes ±15kV ESD protection, but proper layout and external connector protection remain necessary parts of a complete interface solution.

The MAX3388EEUG+ operates from a 2.5V supply, so the bypass network and charge-pump components must follow the manufacturer reference design. Decouple the supply close to the device with low-inductance routing, verify capacitor voltage ratings and tolerances, and avoid long shared supply paths between the transceiver and fast-switching circuitry. Confirm startup and shutdown sequencing against the logic requirements of the connected system.

Do not treat a package-compatible replacement as automatically equivalent without checking its complete orderable suffix. MAX3388EEUG+ is identified as an industrial-temperature-grade 24-pin TSSOP part, while the alternative is documented as a complete replacement but uses a different suffix. Confirm the ordering code, temperature range, supply limits, and lifecycle status in the Maxim Integrated documentation before substituting it in production.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Yes
Sans halogène
Unknown
Minerais de conflit
Unknown

The product is identified as lead-free. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals declarations were not explicitly established by the available manufacturer product listing.

Données vérifiées le : 2026-11-09 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

MAX3388EEUG+ datasheet MAX3388EEUG+ pinout MAX3388EEUG+ datasheet pdf MAX3388EEUG+ equivalent MAX3388EEUG+ replacement MAX3388EEUG+ cross reference MAX3388EEUG+ vs MAX3388ECUG+ MAX3388EEUG+ footprint MAX3388EEUG+ price MAX3388EEUG+ stock Maxim Integrated MAX3388EEUG+ MAX3388EEUG+ RS-232 application circuit

Composants & termes associés

Maxim Integrated MAX3388EEUG+ MAX3388ECUG+ RS-232 RS-232 transceiver EIA/TIA-232 V.28 V.24 interface IC semiconductor 3/2 transceiver CMOS-compatible logic 2.5V power supply ±15kV ESD protection 24-pin TSSOP TSSOP package family surface-mount technology SMD package personal digital assistant cellular phone charge-pump capacitor point-of-sale terminal industrial temperature grade lead-free electronics
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ