MAX383CSE+ - Dual Precision SPDT Analog Switch | Analog Devices
Référence : MAX383CSE+ ✓ ActifMAX383CSE+ Présentation
An analog switch is a semiconductor device that connects or disconnects an electrical signal path under digital control. The MAX383 belongs to the analog-switch and multiplexer hierarchy, combining low-voltage CMOS construction with precision on-resistance characteristics. Its two SPDT switches can select between two signal sources for each channel, making the device useful for analog signal multiplexing, source selection, test-equipment routing, and bidirectional signal-path control.
Key characteristics include on-resistance below 35 ohm, channel-to-channel matching within 2 ohm, flat on-resistance across the specified analog signal range, and operation in either single-supply or bipolar-supply systems. According to the Analog Devices MAX383 product page, the MAX381, MAX383, and MAX385 family uses precision, low-voltage analog switches, while the MAX383 specifically provides two normally open and two normally closed poles. This switching arrangement supports complementary routing rather than simple on/off isolation.
The MAX383 supports +3 V to +15 V single-supply operation and ±3 V to ±8 V bipolar-supply operation. These ranges make it appropriate for low-voltage instrumentation, industrial control, communications, and measurement systems. Its low on-resistance can reduce signal attenuation, while matched channels help minimize path-to-path gain variation. The guaranteed charge injection of less than 5 pC and off-channel leakage below 2.5 nA at +85 °C are particularly useful when switching precision or high-impedance signals.
Analog Devices also identifies the MAX383 as pin-compatible with the DG401, DG403, and DG405. These compatibility relationships allow engineers to evaluate the MAX383 in existing routed designs while still checking control logic, supply level, signal range, and electrical limits against the complete manufacturer datasheet. The device also supports TTL/CMOS-compatible logic, making it practical to combine with common microcontroller and digital control systems.
PCB implementation requires care around high-impedance nodes. Keep routing short, provide a stable ground reference, and avoid placing sensitive analog traces beside fast digital or switching-converter paths. Input and output traces should not be forced beyond the device's absolute-maximum ratings, and control inputs must remain within their specified logic thresholds. The SOIC-16 outline supports conventional surface-mount assembly and provides adequate routing space for two complete SPDT channels.
This page consolidates manufacturer specifications, package details, sourcing guidance, and design-oriented guidance into one engineering reference. It also identifies verified pin-compatible options while clearly separating exact drop-in candidates from functionally related devices that require a different package or a full electrical review.
Alternatives de remplacement direct pour MAX383CSE+ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
PS383CSE
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
DG401CSE
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
DG403CSE
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
DG405CSE
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MAX383CSE+ Valeurs maximales et caractéristiques électriques
| Number of Switches | 2 switches |
| Switch Configuration | 2:1 SPDT per channel |
| On-Resistance | 20 ohm typical, 35 ohm maximum |
| On-Resistance Matching Between Channels | Less than 2 ohm |
| On-Resistance Flatness | Less than 4 ohm over specified analog signal range |
| Single-Supply Operating Range | +3 V to +15 V |
| Bipolar-Supply Operating Range | ±3 V to ±8 V |
| Charge Injection | Less than 5 pC |
| Off-Channel Leakage | Less than 2.5 nA at +85 °C |
| Logic Compatibility | TTL/CMOS-compatible |
| Boîtier | 16-pin SOIC |
| Type de montage | Surface mount |
| Nombre de broches | 16 pins |
| Statut RoHS | Non-compliant |
Guide de configuration des broches du MAX383CSE+ 16-pin soic
Configuration des broches du MAX383CSE+ (boîtier 16-pin soic). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour MAX383CSE+.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MAX383CSE+ convient pour 6 applications: Precision Analog Signal Multiplexing, Test and Measurement Routing, Industrial Sensor Signal Selection, Communications Interface Switching, Low-Voltage Data Acquisition, Audio and Instrumentation Signal Routing.
Precision Analog Signal Multiplexing
The MAX383CSE+ fits precision multiplexing because each of its two channels can select one of two analog paths while maintaining less than 35 ohm on-resistance. Matching below 2 ohm between channels helps reduce gain variation when the selected source changes. The device is particularly useful when a compact 16-pin SOIC implementation is preferred and the signal amplitude remains within the manufacturer's specified analog range. Its sub-5 pC charge injection also limits switching disturbance on sensitive nodes.
Recommandé
Test and Measurement Routing
The MAX383CSE+ can route signals in test and measurement systems where compact dual-pole switching and repeatable path resistance are important. Its 20 ohm typical on-resistance provides a relatively low insertion loss, while the guaranteed channel matching below 2 ohm supports comparisons between two measured paths. Because the device supports both +3 V to +15 V single-supply and ±3 V to ±8 V bipolar operation, it can serve legacy and modern low-voltage measurement architectures.
Recommandé
Industrial Sensor Signal Selection
The MAX383CSE+ is suitable for selecting sensor signals in industrial systems with low-level analog outputs. Two independently controlled SPDT channels reduce the number of discrete routing components when two sources must be selected. Low off-channel leakage below 2.5 nA at +85 °C helps protect high-impedance sensor interfaces, while the compact SOIC-16 package supports dense control boards. The complete input range, supply arrangement, and grounding method must satisfy the sensor output conditions.
Recommandé
Communications Interface Switching
The MAX383CSE+ can be used in low-voltage communications equipment to route signals between transmit, receive, test, or termination paths. Its less-than-35-ohm on-resistance limits resistive loss in moderate-impedance interfaces, and TTL/CMOS-compatible logic allows control from common embedded systems. Two channels provide independent routing in one package, reducing board area. Designers should verify bandwidth-related switching time and the allowable signal range because those details are not published in the product summary.
Recommandé
Low-Voltage Data Acquisition
The MAX383CSE+ is appropriate for compact data-acquisition front ends that need to choose between two analog channels before conversion or instrumentation amplification. Its low channel-to-channel resistance matching minimizes systematic error when the selected input changes, and its low charge injection helps limit transient errors from control transitions. Operation from +3 V to +15 V supports common low-voltage systems. High-impedance nodes should be shielded from switching control edges and digital return currents.
Recommandé
Audio and Instrumentation Signal Routing
The MAX383CSE+ can route low-level audio or instrumentation signals when insertion loss and switching disturbance must remain controlled. On-resistance of 20 ohm typical and 35 ohm maximum is suitable for many impedance-tolerant paths, while charge injection below 5 pC limits control-induced transient error. The two SPDT channels can select complementary sources or destinations. For low-impedance audio networks, verify the complete frequency response and switching-time limits before finalizing the buffer and routing topology.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MAX383CSE+ — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PS383CSE | DG401CSE | DG403CSE | DG405CSE |
|---|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Brand | Analog Devices | Diodes Incorporated | Analog Devices | Analog Devices | Analog Devices |
Principaux différenciateurs
- Guaranteed precision channel matching (vs PS383CSE)
- Specified charge-injection performance (vs PS383CSE)
- Guaranteed low off-channel leakage (vs PS383CSE)
- Multiple supply operating modes (vs DG401CSE)
Notes de conception
Place the MAX383CSE+ close to the signal source and destination to minimize parasitic resistance and capacitance. Keep analog terminals away from clock, microcontroller output, and power-converter switching nodes. Use a continuous ground plane and route control traces away from sensitive high-impedance inputs. Although the device is specified for less than 35 ohm on-resistance, PCB traces can materially affect precision or high-impedance measurements.
Validate control-edge settling for the signal bandwidth in use. The published product information establishes low charge injection of less than 5 pC, but overall settling also depends on source impedance, load capacitance, control rise time, and trace capacitance. For high-impedance nodes, add a defined input capacitance and buffer the switched node when its impedance makes leakage and injected charge significant.
Do not substitute the MAX383CPE+ for MAX383CSE+ on an existing board: the former uses a through-hole package while the latter uses a surface-mount SOIC. Likewise, confirm control polarity and logic thresholds for the DG401, DG403, DG405, or PS383CSE alternatives. Pin compatibility identifies the footprint, but it does not waive verification of supply voltage, absolute-maximum ratings, leakage, and on-resistance.
Informations de conformité
The MAX383CSE listing identifies RoHS status as non-compliant. No additional REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is established for this exact MPN.