Analog Devices

MAX383CSE+ - Dual Precision SPDT Analog Switch | Analog Devices

料号: MAX383CSE+ ✓ 量产中
+3 V to +15 V Vdss 20 ohm typical, 35 ohm maximum Rds(on) 16-pin SOIC Package
最小起订量: 1 |

MAX383CSE+ 概述

The Analog Devices MAX383CSE+ is a dual precision, low-voltage CMOS analog switch with two independently controlled single-pole double-throw channels, less than 35 ohm on-resistance, and operation from +3 V to +15 V. The device is packaged in a 16-pin SOIC for surface-mount designs that require low-leakage, low-charge-injection signal routing.

An analog switch is a semiconductor device that connects or disconnects an electrical signal path under digital control. The MAX383 belongs to the analog-switch and multiplexer hierarchy, combining low-voltage CMOS construction with precision on-resistance characteristics. Its two SPDT switches can select between two signal sources for each channel, making the device useful for analog signal multiplexing, source selection, test-equipment routing, and bidirectional signal-path control.

Key characteristics include on-resistance below 35 ohm, channel-to-channel matching within 2 ohm, flat on-resistance across the specified analog signal range, and operation in either single-supply or bipolar-supply systems. According to the Analog Devices MAX383 product page, the MAX381, MAX383, and MAX385 family uses precision, low-voltage analog switches, while the MAX383 specifically provides two normally open and two normally closed poles. This switching arrangement supports complementary routing rather than simple on/off isolation.

The MAX383 supports +3 V to +15 V single-supply operation and ±3 V to ±8 V bipolar-supply operation. These ranges make it appropriate for low-voltage instrumentation, industrial control, communications, and measurement systems. Its low on-resistance can reduce signal attenuation, while matched channels help minimize path-to-path gain variation. The guaranteed charge injection of less than 5 pC and off-channel leakage below 2.5 nA at +85 °C are particularly useful when switching precision or high-impedance signals.

Analog Devices also identifies the MAX383 as pin-compatible with the DG401, DG403, and DG405. These compatibility relationships allow engineers to evaluate the MAX383 in existing routed designs while still checking control logic, supply level, signal range, and electrical limits against the complete manufacturer datasheet. The device also supports TTL/CMOS-compatible logic, making it practical to combine with common microcontroller and digital control systems.

PCB implementation requires care around high-impedance nodes. Keep routing short, provide a stable ground reference, and avoid placing sensitive analog traces beside fast digital or switching-converter paths. Input and output traces should not be forced beyond the device's absolute-maximum ratings, and control inputs must remain within their specified logic thresholds. The SOIC-16 outline supports conventional surface-mount assembly and provides adequate routing space for two complete SPDT channels.

This page consolidates manufacturer specifications, package details, sourcing guidance, and design-oriented guidance into one engineering reference. It also identifies verified pin-compatible options while clearly separating exact drop-in candidates from functionally related devices that require a different package or a full electrical review.

直接替换替代料: MAX383CSE+ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

PS383CSE

✅ 直接替换
📦 16-SOIC
Listed on-resistance is 30 ohm versus 35 ohm maximum for MAX383CSE+; remaining electrical ratings require datasheet verification.

📋 参考替代料(不在目录中)

DG401CSE

✅ 直接替换
📦 16-SOIC
Pin-compatible with MAX383, but the DG401 family specifications and possibly on-resistance differ from the MAX383.

📋 参考替代料(不在目录中)

DG403CSE

✅ 直接替换
📦 16-SOIC
Pin-compatible with MAX383, but the DG403 family's rated characteristics differ from the MAX383's 35 ohm maximum on-resistance.

📋 参考替代料(不在目录中)

DG405CSE

✅ 直接替换
📦 16-SOIC
Pin-compatible with MAX383, with family-specific differences in on-resistance, logic behavior, and electrical limits.

📋 参考替代料(不在目录中)

MAX383CSE+ 最大额定值与电气特性

Number of Switches 2 switches
Switch Configuration 2:1 SPDT per channel
On-Resistance 20 ohm typical, 35 ohm maximum
On-Resistance Matching Between Channels Less than 2 ohm
On-Resistance Flatness Less than 4 ohm over specified analog signal range
Single-Supply Operating Range +3 V to +15 V
Bipolar-Supply Operating Range ±3 V to ±8 V
Charge Injection Less than 5 pC
Off-Channel Leakage Less than 2.5 nA at +85 °C
Logic Compatibility TTL/CMOS-compatible
封装 16-pin SOIC
安装类型 Surface mount
引脚数 16 pins
RoHS 状态 Non-compliant

MAX383CSE+ 16-pin soic 引脚配置指南

MAX383CSE+(16-pin soic 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

MAX383CSE+ 的 16-pin soic 封装引脚图

暂无详细引脚数据: MAX383CSE+.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MAX383CSE+ 适用于 6 应用s: Precision Analog Signal Multiplexing, Test and Measurement Routing, Industrial Sensor Signal Selection, Communications Interface Switching, Low-Voltage Data Acquisition, Audio and Instrumentation Signal Routing.

🌐

Precision Analog Signal Multiplexing

The MAX383CSE+ fits precision multiplexing because each of its two channels can select one of two analog paths while maintaining less than 35 ohm on-resistance. Matching below 2 ohm between channels helps reduce gain variation when the selected source changes. The device is particularly useful when a compact 16-pin SOIC implementation is preferred and the signal amplitude remains within the manufacturer's specified analog range. Its sub-5 pC charge injection also limits switching disturbance on sensitive nodes.

⚡

Test and Measurement Routing

The MAX383CSE+ can route signals in test and measurement systems where compact dual-pole switching and repeatable path resistance are important. Its 20 ohm typical on-resistance provides a relatively low insertion loss, while the guaranteed channel matching below 2 ohm supports comparisons between two measured paths. Because the device supports both +3 V to +15 V single-supply and ±3 V to ±8 V bipolar operation, it can serve legacy and modern low-voltage measurement architectures.

🏭

Industrial Sensor Signal Selection

The MAX383CSE+ is suitable for selecting sensor signals in industrial systems with low-level analog outputs. Two independently controlled SPDT channels reduce the number of discrete routing components when two sources must be selected. Low off-channel leakage below 2.5 nA at +85 °C helps protect high-impedance sensor interfaces, while the compact SOIC-16 package supports dense control boards. The complete input range, supply arrangement, and grounding method must satisfy the sensor output conditions.

🌐

Communications Interface Switching

The MAX383CSE+ can be used in low-voltage communications equipment to route signals between transmit, receive, test, or termination paths. Its less-than-35-ohm on-resistance limits resistive loss in moderate-impedance interfaces, and TTL/CMOS-compatible logic allows control from common embedded systems. Two channels provide independent routing in one package, reducing board area. Designers should verify bandwidth-related switching time and the allowable signal range because those details are not published in the product summary.

📺

Low-Voltage Data Acquisition

The MAX383CSE+ is appropriate for compact data-acquisition front ends that need to choose between two analog channels before conversion or instrumentation amplification. Its low channel-to-channel resistance matching minimizes systematic error when the selected input changes, and its low charge injection helps limit transient errors from control transitions. Operation from +3 V to +15 V supports common low-voltage systems. High-impedance nodes should be shielded from switching control edges and digital return currents.

🎧

Audio and Instrumentation Signal Routing

The MAX383CSE+ can route low-level audio or instrumentation signals when insertion loss and switching disturbance must remain controlled. On-resistance of 20 ohm typical and 35 ohm maximum is suitable for many impedance-tolerant paths, while charge injection below 5 pC limits control-induced transient error. The two SPDT channels can select complementary sources or destinations. For low-impedance audio networks, verify the complete frequency response and switching-time limits before finalizing the buffer and routing topology.

推荐产品汇总

MAX383CSE Same MAX383 family in the 16-pin SOIC configuration 用于: Precision Analog Signal Multiplexing, Test and Measurement Routing, Industrial Sensor Signal Selection, Communications Interface Switching, Low-Voltage Data Acquisition, Audio and Instrumentation Signal Routing PS383CSE Close dual SPDT analog-switch alternative 用于: Precision Analog Signal Multiplexing, Test and Measurement Routing, Industrial Sensor Signal Selection, Communications Interface Switching, Low-Voltage Data Acquisition, Audio and Instrumentation Signal Routing
Where can I download the MAX383CSE+ datasheet PDF?
The official MAX383CSE+ datasheet and product information are available through the Analog Devices MAX383 product page at https://www.analog.com/en/products/max383.html. The manufacturer page identifies the MAX383 as a precision, low-voltage SPDT analog switch and provides the authoritative pin, electrical, and ordering information needed for PCB design and qualification. Use the package-specific ordering information to confirm that MAX383CSE+ corresponds to the required 16-pin SOIC configuration.
What is the MAX383CSE+ and what does it do?
The MAX383CSE+ is a dual precision CMOS analog switch containing two single-pole double-throw channels. Each channel can route a signal between two paths under logic control, while its on-resistance is 20 ohm typical and 35 ohm maximum. Analog Devices describes the MAX383 family as low-voltage, precision switches with matched on-resistance, low charge injection, and low off-channel leakage, making the device useful for precision signal-routing systems.
What are the key specifications of MAX383CSE+ that engineers should know?
The MAX383CSE+ provides two SPDT channels in a 16-pin SOIC package, with 20 ohm typical on-resistance and no more than 35 ohm maximum. It operates from +3 V to +15 V in single-supply mode or from ±3 V to ±8 V in bipolar mode. Additional characteristics include less than 2 ohm channel matching, less than 5 pC charge injection, less than 2.5 nA off-channel leakage at +85 °C, and TTL/CMOS-compatible control logic.
What supply voltage does MAX383CSE+ require?
The MAX383CSE+ supports +3 V to +15 V for single-supply operation and ±3 V to ±8 V for bipolar-supply operation. These ranges are specified on the Analog Devices MAX383 product page. Circuit designers should select the supply arrangement that matches the signal source, signal destination, and control-logic levels, then verify every analog input remains inside the absolute-maximum limits stated in the manufacturer datasheet.
Where can I find the MAX383CSE+ pinout and SOIC-16 layout?
The MAX383CSE+ pinout is published in the Analog Devices MAX383 manufacturer datasheet, with the product page located at https://www.analog.com/en/products/max383.html. The device uses a 16-pin SOIC package. Use the manufacturer's pin-description table and package drawing when assigning control inputs, analog terminals, and supply connections rather than relying on a third-party layout.
Is MAX383CSE+ suitable for precision signal routing?
Yes, MAX383CSE+ is designed for precision low-voltage signal routing. Its on-resistance is 20 ohm typical and 35 ohm maximum, while the on-resistance matching between channels is guaranteed below 2 ohm. Charge injection below 5 pC and off-channel leakage below 2.5 nA at +85 °C help limit switching errors, particularly in high-impedance measurement and instrumentation circuits.
What can replace the MAX383CSE+?
The strongest verified replacement candidate is the Diodes Incorporated PS383CSE, which is listed as a 2-circuit, 2:1, 30 ohm, 16-SOIC analog switch and is therefore a close same-package functional match. However, its 30 ohm listed on-resistance differs from the MAX383CSE+ maximum of 35 ohm, and engineers should verify voltage ratings, logic thresholds, leakage, charge injection, and pin mapping in the complete PS383 datasheet before approving a substitution.
Is the Diodes Incorporated PS383CSE a drop-in replacement for MAX383CSE+?
The PS383CSE is a strong drop-in candidate because it uses the same 16-SOIC package and is described as a dual 2:1 analog switch with 30 ohm on-resistance. Unlike the MAX383CSE+, whose maximum on-resistance is 35 ohm, the PS383 listing states 30 ohm. Final substitution approval still requires checking pin functions, control polarity, supply limits, analog signal range, leakage, and switching specifications against the manufacturer datasheets.
When should I choose MAX383CSE+ over the PS383CSE?
Choose the MAX383CSE+ when the design specifically depends on the Maxim/Analog Devices MAX383 electrical limits, control behavior, or qualification history. Its key published advantages include 20 ohm typical on-resistance, guaranteed matching below 2 ohm, charge injection below 5 pC, and off-channel leakage below 2.5 nA at +85 °C. Choose the PS383CSE only after confirming that its separate electrical ratings satisfy the signal-integrity requirements of the existing board.
What is the difference between MAX383CSE+ and the DG401, DG403, and DG405?
Analog Devices states that the MAX383 is pin-compatible with the DG401, DG403, and DG405, but those devices represent related switch families whose specifications are not interchangeable merely because the pins align. The MAX383 is a dual SPDT device with maximum on-resistance of 35 ohm and charge injection below 5 pC. Compare supply range, on-resistance, leakage, logic levels, signal range, and absolute-maximum ratings before using any DG-series member as a replacement.
Where can I buy MAX383CSE+ and check current availability?
Use the Request a Quote form on this page to ask for MAX383CSE+ availability, order quantities, and delivery scheduling. The part is an active 16-pin SOIC analog switch from Analog Devices, and the official product page is https://www.analog.com/en/products/max383.html. The quote form provides a direct sourcing path without requiring you to navigate several separate supplier listings.
What is the price of MAX383CSE+?
Current commercial pricing for MAX383CSE+ should be obtained through the Request a Quote form on this page because pricing and inventory can change with market conditions, order volume, and packaging requirements. The manufacturer product page at https://www.analog.com/en/products/max383.html is the authoritative source for part identification and ordering details, while the quote form is the appropriate route for a current transaction.
What is the lead time for MAX383CSE+?
The current lead time for MAX383CSE+ should be confirmed through the Request a Quote form on this page, using the required quantity and packaging details in the request. The manufacturer lists the MAX383 family as an active product, but production availability and lead time can vary by order volume and inventory position. A quote request allows the current schedule to be matched to the actual procurement quantity.
Is MAX383CSE+ in stock?
Current stock for MAX383CSE+ is best checked through the Request a Quote form on this page. The official Analog Devices MAX383 product page confirms the product family, but real-time stock position is transactional and can vary by quantity and package. Submit the required quantity and any date constraint through the quote request for an availability response tied to the order.
What is the MAX383CSE+ vs MAX383CPE+ packaging difference?
The principal published distinction is package form: MAX383CSE+ uses a narrow surface-mount SOIC-16 package, while MAX383CPE+ uses a 16-pin through-hole package. The C versus P package code therefore makes them unsuitable as direct PCB drop-ins despite belonging to the same MAX383 family. Use MAX383CSE+ for an existing SMD footprint and MAX383CPE+ only when the PCB provides through-hole pins.

工程参考数据: MAX383CSE+ ——对比、设计指导和合规信息。

选型指南

Choose MAX383CSE+ for a compact dual-SPDT routing design that requires a 16-pin SOIC footprint, TTL/CMOS-compatible control, less than 35 ohm on-resistance, matching below 2 ohm, charge injection below 5 pC, and low off-channel leakage. The PS383CSE is the closest cross-brand alternative because it is also a dual 2:1 switch in a 16-SOIC package and is listed at 30 ohm, but verify its complete electrical ratings and control logic. The DG401, DG403, and DG405 are identified by Analog Devices as pin-compatible with MAX383 and can be useful same-brand options, although their family-specific electrical characteristics require direct comparison. MAX383CPE+ should not be selected for an existing SMD board because it uses a through-hole package. For any substitute, verify pin functions, supply range, absolute-maximum ratings, leakage, charge injection, on-resistance, and logic thresholds against the manufacturer datasheets.

与替代料对比

参数 本产品 PS383CSE DG401CSE DG403CSE DG405CSE
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand Analog Devices Diodes Incorporated Analog Devices Analog Devices Analog Devices

关键差异点

  • Guaranteed precision channel matching (对比 PS383CSE)
  • Specified charge-injection performance (对比 PS383CSE)
  • Guaranteed low off-channel leakage (对比 PS383CSE)
  • Multiple supply operating modes (对比 DG401CSE)

设计说明

Place the MAX383CSE+ close to the signal source and destination to minimize parasitic resistance and capacitance. Keep analog terminals away from clock, microcontroller output, and power-converter switching nodes. Use a continuous ground plane and route control traces away from sensitive high-impedance inputs. Although the device is specified for less than 35 ohm on-resistance, PCB traces can materially affect precision or high-impedance measurements.

Validate control-edge settling for the signal bandwidth in use. The published product information establishes low charge injection of less than 5 pC, but overall settling also depends on source impedance, load capacitance, control rise time, and trace capacitance. For high-impedance nodes, add a defined input capacitance and buffer the switched node when its impedance makes leakage and injected charge significant.

Do not substitute the MAX383CPE+ for MAX383CSE+ on an existing board: the former uses a through-hole package while the latter uses a surface-mount SOIC. Likewise, confirm control polarity and logic thresholds for the DG401, DG403, DG405, or PS383CSE alternatives. Pin compatibility identifies the footprint, but it does not waive verification of supply voltage, absolute-maximum ratings, leakage, and on-resistance.

合规信息

RoHS
Non Compliant
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The MAX383CSE listing identifies RoHS status as non-compliant. No additional REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is established for this exact MPN.

数据核验日期: 2026-11-14 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

MAX383CSE+ datasheet MAX383CSE+ pinout MAX383CSE+ datasheet pdf MAX383CSE+ equivalent MAX383CSE+ replacement MAX383CSE+ cross reference MAX383CSE+ vs PS383CSE MAX383CSE+ SOIC-16 footprint MAX383CSE+ 35 ohm analog switch MAX383CSE+ price MAX383CSE+ stock Analog Devices MAX383CSE+

相关元器件 & 术语

Analog Devices Maxim Integrated MAX383CSE+ MAX383 PS383CSE DG401CSE DG403CSE DG405CSE analog switch analog multiplexer single-pole double-throw SPDT CMOS analog switch on-resistance charge injection off-channel leakage precision signal routing SOIC-16 surface-mount package TTL-compatible logic CMOS-compatible logic single-supply operation bipolar-supply operation industrial instrumentation RoHS
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情