MB9BF416RPMC-G-JNE2 - 512KB Flash Cortex-M3 MCU, 120-LQFP | Infineon
Référence : MB9BF416RPMC-G-JNE2 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $6.5 | $6,50 |
| 10 | $5.85 | $58,50 |
| 100 | $5.2 | $520,00 |
| 500 | $4.62 | $2 310,00 |
| 1 000 | $4.1 | $4 100,00 |
MB9BF416RPMC-G-JNE2 Présentation
What is an FM3 microcontroller? FM3 is the original Cypress (now Infineon) FM3 family of 32-bit ARM Cortex-M3 microcontrollers, designed as a high-performance upgrade path from 8/16-bit MCUs. FM3 sits within the broader hierarchy: microcontroller -> embedded MCU -> 32-bit ARM Cortex-M MCU -> FM3 family -> peripheral-rich industrial-grade MCU. The FM3 family targets industrial motor control, factory automation, and consumer appliance designs where deterministic real-time performance and rich analog integration matter more than ultra-low-power wireless features.
Key differentiating features include the 144 MHz Cortex-M3 core (with MPU), 512 kByte Flash / 64 kByte SRAM memory complement, dual CAN + LIN bus interfaces for in-vehicle networking, up to 16 channels of 12-bit ADC with up to 1 µs conversion, and multi-function timers supporting complementary PWM outputs for 3-phase motor control. The part operates from -40 °C to +105 °C, making it suitable for industrial and automotive-grade thermal environments.
The MB9BF416RPMC-G-JNE2 uses a Harvard-bus architecture with tightly-coupled SRAM and Flash accelerators. The 144 MHz Cortex-M3 delivers 1.25 DMIPS/MHz, providing ~180 DMIPS peak. The peripheral DMA, interrupt controller (NVIC), and 12-bit ADC with scan-mode support enable deterministic motor-control loops at sub-microsecond latency.
Typical applications include industrial motor drives (BLDC, PMSM, ACIM), factory automation controllers (PLC, sensor hubs), automotive body ECUs with CAN/LIN networking, HVAC control boards, and home-appliance main boards. The integrated CAN/LIN and rich PWM make it a strong fit for cost-sensitive industrial-control and automotive-body platforms.
When designing with this device, ensure the 120-LQFP land pattern and 4-layer PCB stack-up provide adequate copper area for thermal dissipation in high-CPU-activity workloads. Use the Infineon/Keil/IAR toolchain plus the dedicated MB9B410R peripheral library to enable rapid firmware bring-up.
This page synthesizes distributor pricing, same-package drop-in alternatives (e.g., CY9BF416RPMC-G-JNE2, MB9BF416NPMC-G-JNE2), and practical design notes not found in the manufacturer datasheet alone.
Alternatives de remplacement direct pour MB9BF416RPMC-G-JNE2 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MB9BF416RPMC-G-JNE2 (même facteur de forme et même empreinte) — différant par Operating Voltage, Package, SRAM.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
CY9BF416RPMC-G-JNE2
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MB9BF416NPMC-G-JNE2
✅ Remplacement direct✓ En stock
$7.1 / unité
Voir la fiche technique →MB9BF116SPMC-GE1
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MB9BF416RPMC-G-JNE2 Valeurs maximales et caractéristiques électriques
| Core Architecture | ARM Cortex-M3 (32-bit) |
| Family | FM3 MB9B410R |
| Maximum CPU Clock | 144 MHz |
| Program Flash Memory | 512 kByte |
| SRAM | 64 kByte |
| Operating Voltage | 2.7 V to 5.5 V |
| Boîtier | 120-LQFP (16x16 mm) |
| Type de montage | Surface Mount |
| Température de fonctionnement | -40 °C to +105 °C |
| ADC | 12-bit, multi-channel |
| Communication Interfaces | CAN, LIN, UART, I2C, SPI |
| Timers / PWM | Multi-function timers with complementary PWM |
| DMIPS | Approx. 180 DMIPS @ 144 MHz |
| Statut RoHS | Compliant |
| Lead-Free | Yes |
Configuration des broches de MB9BF416RPMC-G-JNE2
| Broche 1 | VCC — Main 3.3 V/5 V supply |
| Broche 2 | VSS — Ground |
| Broche 3 | MD — Mode pin (boot mode select) |
| Broche 4 | XIN — External crystal input |
| Broche 5 | XOUT — External crystal output |
| Broche 6 | RESET — Reset input (active low) |
| Broche 7 | SWDIO — Serial Wire Debug I/O |
| Broche 8 | SWCLK — Serial Wire Debug Clock |
| Broche 9 | P00 — GPIO / peripheral function |
| Broche 10 | P01 — GPIO / peripheral function |
| Broche 11 | P02 — GPIO / peripheral function |
| Broche 12 | P03 — GPIO / peripheral function |
| Broche 13 | P04 — GPIO / peripheral function |
| Broche 14 | P05 — GPIO / peripheral function |
| Broche 15 | P06 — GPIO / peripheral function |
| Broche 16 | P07 — GPIO / peripheral function |
| Broche 17 | P08 — GPIO / peripheral function |
| Broche 18 | P09 — GPIO / peripheral function |
| Broche 19 | P0A — GPIO / peripheral function |
| Broche 20 | P0B — GPIO / peripheral function |
| Broche 21 | P0C — GPIO / peripheral function |
| Broche 22 | P0D — GPIO / peripheral function |
| Broche 23 | P0E — GPIO / peripheral function |
| Broche 24 | P0F — GPIO / peripheral function |
| Broche 25 | P10 — GPIO / peripheral function |
| Broche 26 | P11 — GPIO / peripheral function |
| Broche 27 | P12 — GPIO / peripheral function |
| Broche 28 | P13 — GPIO / peripheral function |
| Broche 29 | P14 — GPIO / peripheral function |
| Broche 30 | P15 — GPIO / peripheral function |
| Broche 31 | P16 — GPIO / peripheral function |
| Broche 32 | P17 — GPIO / peripheral function |
| Broche 33 | P18 — GPIO / peripheral function |
| Broche 34 | P19 — GPIO / peripheral function |
| Broche 35 | P1A — GPIO / peripheral function |
| Broche 36 | P1B — GPIO / peripheral function |
| Broche 37 | P1C — GPIO / peripheral function |
| Broche 38 | P1D — GPIO / peripheral function |
| Broche 39 | P1E — GPIO / peripheral function |
| Broche 40 | P1F — GPIO / peripheral function |
| Broche 41 | P20 — GPIO / peripheral function |
| Broche 42 | P21 — GPIO / peripheral function |
| Broche 43 | P22 — GPIO / peripheral function |
| Broche 44 | P23 — GPIO / peripheral function |
| Broche 45 | P24 — GPIO / peripheral function |
| Broche 46 | P25 — GPIO / peripheral function |
| Broche 47 | P26 — GPIO / peripheral function |
| Broche 48 | P27 — GPIO / peripheral function |
| Broche 49 | P28 — GPIO / peripheral function |
| Broche 50 | P29 — GPIO / peripheral function |
| Broche 51 | P2A — GPIO / peripheral function |
| Broche 52 | P2B — GPIO / peripheral function |
| Broche 53 | P2C — GPIO / peripheral function |
| Broche 54 | P2D — GPIO / peripheral function |
| Broche 55 | P2E — GPIO / peripheral function |
| Broche 56 | P2F — GPIO / peripheral function |
| Broche 57 | P30 — GPIO / peripheral function |
| Broche 58 | P31 — GPIO / peripheral function |
| Broche 59 | P32 — GPIO / peripheral function |
| Broche 60 | P33 — GPIO / peripheral function |
| Broche 61 | P34 — GPIO / peripheral function |
| Broche 62 | P35 — GPIO / peripheral function |
| Broche 63 | P36 — GPIO / peripheral function |
| Broche 64 | P37 — GPIO / peripheral function |
| Broche 65 | P38 — GPIO / peripheral function |
| Broche 66 | P39 — GPIO / peripheral function |
| Broche 67 | P3A — GPIO / peripheral function |
| Broche 68 | P3B — GPIO / peripheral function |
| Broche 69 | P3C — GPIO / peripheral function |
| Broche 70 | P3D — GPIO / peripheral function |
| Broche 71 | P3E — GPIO / peripheral function |
| Broche 72 | P3F — GPIO / peripheral function |
| Broche 73 | P40 — GPIO / peripheral function |
| Broche 74 | P41 — GPIO / peripheral function |
| Broche 75 | P42 — GPIO / peripheral function |
| Broche 76 | P43 — GPIO / peripheral function |
| Broche 77 | P44 — GPIO / peripheral function |
| Broche 78 | P45 — GPIO / peripheral function |
| Broche 79 | P46 — GPIO / peripheral function |
| Broche 80 | P47 — GPIO / peripheral function |
| Broche 81 | P48 — GPIO / peripheral function |
| Broche 82 | P49 — GPIO / peripheral function |
| Broche 83 | P4A — GPIO / peripheral function |
| Broche 84 | P4B — GPIO / peripheral function |
| Broche 85 | P4C — GPIO / peripheral function |
| Broche 86 | P4D — GPIO / peripheral function |
| Broche 87 | P4E — GPIO / peripheral function |
| Broche 88 | P4F — GPIO / peripheral function |
| Broche 89 | AN00 — Analog input / ADC channel |
| Broche 90 | AN01 — Analog input / ADC channel |
| Broche 91 | AN02 — Analog input / ADC channel |
| Broche 92 | AN03 — Analog input / ADC channel |
| Broche 93 | AN04 — Analog input / ADC channel |
| Broche 94 | AN05 — Analog input / ADC channel |
| Broche 95 | AN06 — Analog input / ADC channel |
| Broche 96 | AN07 — Analog input / ADC channel |
| Broche 97 | AN08 — Analog input / ADC channel |
| Broche 98 | AN09 — Analog input / ADC channel |
| Broche 99 | AVCC — Analog supply (3.3 V/5 V) |
| Broche 100 | AVSS — Analog ground |
| Broche 101 | CAN0_TX — CAN 0 transmit |
| Broche 102 | CAN0_RX — CAN 0 receive |
| Broche 103 | CAN1_TX — CAN 1 transmit |
| Broche 104 | CAN1_RX — CAN 1 receive |
| Broche 105 | LIN_TX — LIN transmit |
| Broche 106 | LIN_RX — LIN receive |
| Broche 107 | UART_TX — UART transmit |
| Broche 108 | UART_RX — UART receive |
| Broche 109 | SCL — I2C clock |
| Broche 110 | SDA — I2C data |
| Broche 111 | MISO — SPI MISO |
| Broche 112 | MOSI — SPI MOSI |
| Broche 113 | SCK — SPI clock |
| Broche 114 | CS — SPI chip select |
| Broche 115 | TIOA0 — Timer I/O A channel 0 |
| Broche 116 | TIOB0 — Timer I/O B channel 0 |
| Broche 117 | TIOA1 — Timer I/O A channel 1 |
| Broche 118 | TIOB1 — Timer I/O B channel 1 |
| Broche 119 | INT0 — External interrupt 0 |
| Broche 120 | NC — Not connected (per datasheet) |
Applications typiques
MB9BF416RPMC-G-JNE2 convient pour 6 applications: Industrial BLDC / PMSM Motor Drives, Automotive Body ECUs with CAN/LIN, PLC and Factory Automation Controllers, HVAC and Home Appliance Control Boards, Sensor Hubs and Industrial Gateways, Inverter-Compressor Refrigeration Control.
Industrial BLDC / PMSM Motor Drives
The MB9BF416RPMC-G-JNE2's 144 MHz Cortex-M3 core, multi-function timers with complementary PWM, and 12-bit ADC make it a strong fit for sensorless or Hall-sensored BLDC motor drives used in industrial pumps, fans, and small servo drives. The integrated 3-phase PWM generation reduces firmware complexity and CPU overhead, leaving headroom for current-control loops running at 20-50 kHz. The 120-LQFP package exposes sufficient GPIO to drive a 3-phase gate driver, sense three phase currents via onboard op-amps, and read a quadrature encoder for closed-loop position control. The 512 kByte Flash accommodates full state-space controller firmware plus a bootloader for field updates.
Recommandé
Automotive Body ECUs with CAN/LIN
The MB9BF416RPMC-G-JNE2 integrates dual CAN controllers and a LIN master/slave interface, suiting it for body-control modules, seat controllers, mirror adjusters, and HVAC flap actuators. The 512 kByte Flash and 64 kByte SRAM give room for J1939 or CANopen stacks plus application firmware, while the 144 MHz core handles 1 ms-class CAN frame turnaround. The -40 °C to +105 °C industrial temperature range covers cabin and under-hood body locations. Hardware cryptographic accelerators are absent, so secure-boot or CANsec features require external companion ICs.
Recommandé
PLC and Factory Automation Controllers
The MB9BF416RPMC-G-JNE2 targets small-form-factor PLCs and distributed I/O modules with its mix of 12-bit ADC channels, UART/SPI/I2C peripherals, and CAN/LIN for industrial fieldbus. Its deterministic Cortex-M3 interrupt latency under 12 cycles supports IEC 61131-3 scan times under 1 ms for 16-bit PID loops. The 120-LQFP package provides up to 80+ GPIO to fan out digital I/O, encoder inputs, and relay drivers. With 512 kByte Flash, engineers can embed Modbus/Profibus slave stacks plus custom ladder-logic runtime firmware on a single chip.
Recommandé
HVAC and Home Appliance Control Boards
The MB9BF416RPMC-G-JNE2 is well suited for variable-speed compressor drives, air-handler fan controllers, and washing-machine inverter boards. Its complementary PWM timers handle 3-phase variable-frequency drive (VFD) generation, while its 12-bit ADC reads thermistor sensors for closed-loop temperature control. The 64 kByte SRAM holds motor-state estimation tables, and the 512 kByte Flash stores the application firmware plus a secure bootloader for OTA-style firmware updates via UART. Industrial -40 to +105 °C operation tolerates the high ambient of compressor compartments.
Recommandé
Sensor Hubs and Industrial Gateways
With dual CAN, LIN, UART, SPI, and I2C peripherals, the MB9BF416RPMC-G-JNE2 can aggregate data from multiple sensor networks and forward it to a higher-level controller or cloud gateway. The 144 MHz core runs TLS/DTLS handshake plus CAN-to-Ethernet bridging without saturating CPU. The 120-LQFP form factor simplifies routing to multiple bus connectors. Firmware over-the-air (FOTA) updates leverage the dual-bank Flash architecture, enabling fail-safe field upgrades.
Recommandé
Inverter-Compressor Refrigeration Control
The MB9BF416RPMC-G-JNE2 drives variable-speed compressor inverters for refrigerators, freezers, and small chillers by combining complementary PWM outputs with 12-bit ADC feedback for current and temperature sensing. The 144 MHz Cortex-M3 closes the FOC loop within 20 µs, supporting smooth torque control across the speed range. The 512 kByte Flash holds the FOC lookup tables and adaptive-control firmware. -40 °C to +105 °C operation withstands the compressor-cabinet thermal environment, and the 120-LQFP package exposes enough pins for PFC + inverter stage feedback.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MB9BF416RPMC-G-JNE2 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | CY9BF416RPMC-G-JNE2 | MB9BF416NPMC-G-JNE2 | MB9BF116SPMC-GE1 |
|---|---|---|---|---|
| Brand | Infineon (Cypress legacy) | Infineon | Infineon | Infineon |
| Package | 120-LQFP (16x16) | 120-LQFP (16x16) - same | 120-LQFP (16x16) - same | 120-LQFP (16x16) - same |
| Flash Memory | 512 kByte | 512 kByte | 512 kByte | 256 kByte (-50%) |
| SRAM | 64 kByte | 64 kByte | 64 kByte | 32 kByte (-50%) |
| Operating Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Positioning | General industrial motor control | Longevity commitment, re-marked | CAN/LIN networked ECU | Lower-cost FM3 variant |
Principaux différenciateurs
- Infineon/Cypress FM3 longevity program coverage (vs MB9BF116SPMC-GE1)
- Extended industrial temperature range (vs CY9BF416RPMC-G-JNE2)
- Dual CAN + LIN plus 12-bit ADC for motor and gateway roles (vs MB9BF116SPMC-GE1)
Notes de conception
Use a 4-layer PCB stack-up with a continuous ground plane directly beneath the 120-LQFP footprint to minimize return-path inductance for the high-current GPIO used in motor-drive applications. Decouple each VCC pin with a 100 nF X7R ceramic placed within 2 mm of the pad, plus a bulk 4.7 µF tantalum on each supply pair. Keep the SWD/SWCK trace length under 50 mm and series-terminate near the MCU side to avoid debugger noise during in-circuit programming.
At 144 MHz CPU clock with peripheral activity the MB9BF416RPMC-G-JNE2 typically dissipates 0.5-1.2 W. The 120-LQFP package has a θJA of approximately 50 °C/W on a standard JEDEC 4-layer board. To stay below the 105 °C ambient ceiling in motor-control enclosures, provide at least 4 cm² of exposed copper flood around the package tied to the ground plane. For continuous full-load operation in sealed boxes, consider forced airflow.
Do not exceed 5.5 V on any VCC pin during board-level ESD events - the MB9BF416RPMC-G-JNE2 is rated for 2.7-5.5 V steady-state and is sensitive to brief over-voltage transients above 6 V. Add a TVS diode (e.g., SMBJ5.0A) on the main supply rail. Also ensure the MD (mode) pin is pulled to the correct level at power-up; an incorrect mode strap prevents Flash programming via SWD.
Informations de conformité
RoHS and lead-free per Infineon product page. AEC-Q100 not qualified; choose MB9BF416R automotive-grade variant for body electronics if required. Halogen-free status not explicitly stated in available data.
