MB9BF416RPMC-G-JNE2 - 512KB Flash Cortex-M3 MCU, 120-LQFP | Infineon
N.º da peça: MB9BF416RPMC-G-JNE2 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $6.5 | $6,50 |
| 10 | $5.85 | $58,50 |
| 100 | $5.2 | $520,00 |
| 500 | $4.62 | $2.310,00 |
| 1.000 | $4.1 | $4.100,00 |
MB9BF416RPMC-G-JNE2 Visão geral
What is an FM3 microcontroller? FM3 is the original Cypress (now Infineon) FM3 family of 32-bit ARM Cortex-M3 microcontrollers, designed as a high-performance upgrade path from 8/16-bit MCUs. FM3 sits within the broader hierarchy: microcontroller -> embedded MCU -> 32-bit ARM Cortex-M MCU -> FM3 family -> peripheral-rich industrial-grade MCU. The FM3 family targets industrial motor control, factory automation, and consumer appliance designs where deterministic real-time performance and rich analog integration matter more than ultra-low-power wireless features.
Key differentiating features include the 144 MHz Cortex-M3 core (with MPU), 512 kByte Flash / 64 kByte SRAM memory complement, dual CAN + LIN bus interfaces for in-vehicle networking, up to 16 channels of 12-bit ADC with up to 1 µs conversion, and multi-function timers supporting complementary PWM outputs for 3-phase motor control. The part operates from -40 °C to +105 °C, making it suitable for industrial and automotive-grade thermal environments.
The MB9BF416RPMC-G-JNE2 uses a Harvard-bus architecture with tightly-coupled SRAM and Flash accelerators. The 144 MHz Cortex-M3 delivers 1.25 DMIPS/MHz, providing ~180 DMIPS peak. The peripheral DMA, interrupt controller (NVIC), and 12-bit ADC with scan-mode support enable deterministic motor-control loops at sub-microsecond latency.
Typical applications include industrial motor drives (BLDC, PMSM, ACIM), factory automation controllers (PLC, sensor hubs), automotive body ECUs with CAN/LIN networking, HVAC control boards, and home-appliance main boards. The integrated CAN/LIN and rich PWM make it a strong fit for cost-sensitive industrial-control and automotive-body platforms.
When designing with this device, ensure the 120-LQFP land pattern and 4-layer PCB stack-up provide adequate copper area for thermal dissipation in high-CPU-activity workloads. Use the Infineon/Keil/IAR toolchain plus the dedicated MB9B410R peripheral library to enable rapid firmware bring-up.
This page synthesizes distributor pricing, same-package drop-in alternatives (e.g., CY9BF416RPMC-G-JNE2, MB9BF416NPMC-G-JNE2), and practical design notes not found in the manufacturer datasheet alone.
Alternativas drop-in para MB9BF416RPMC-G-JNE2 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MB9BF416RPMC-G-JNE2 (mesmo formato e footprint) — diferindo em Operating Voltage, Package, SRAM.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
CY9BF416RPMC-G-JNE2
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MB9BF416NPMC-G-JNE2
✅ Drop-In✓ Em estoque
$7.1 / unidade
Ver ficha técnica →MB9BF116SPMC-GE1
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MB9BF416RPMC-G-JNE2 Classificações máximas e características elétricas
| Core Architecture | ARM Cortex-M3 (32-bit) |
| Family | FM3 MB9B410R |
| Maximum CPU Clock | 144 MHz |
| Program Flash Memory | 512 kByte |
| SRAM | 64 kByte |
| Operating Voltage | 2.7 V to 5.5 V |
| Encapsulamento | 120-LQFP (16x16 mm) |
| Tipo de montagem | Surface Mount |
| Temperatura de operação | -40 °C to +105 °C |
| ADC | 12-bit, multi-channel |
| Communication Interfaces | CAN, LIN, UART, I2C, SPI |
| Timers / PWM | Multi-function timers with complementary PWM |
| DMIPS | Approx. 180 DMIPS @ 144 MHz |
| Status RoHS | Compliant |
| Lead-Free | Yes |
Configuração de pinos do MB9BF416RPMC-G-JNE2
| Pino 1 | VCC — Main 3.3 V/5 V supply |
| Pino 2 | VSS — Ground |
| Pino 3 | MD — Mode pin (boot mode select) |
| Pino 4 | XIN — External crystal input |
| Pino 5 | XOUT — External crystal output |
| Pino 6 | RESET — Reset input (active low) |
| Pino 7 | SWDIO — Serial Wire Debug I/O |
| Pino 8 | SWCLK — Serial Wire Debug Clock |
| Pino 9 | P00 — GPIO / peripheral function |
| Pino 10 | P01 — GPIO / peripheral function |
| Pino 11 | P02 — GPIO / peripheral function |
| Pino 12 | P03 — GPIO / peripheral function |
| Pino 13 | P04 — GPIO / peripheral function |
| Pino 14 | P05 — GPIO / peripheral function |
| Pino 15 | P06 — GPIO / peripheral function |
| Pino 16 | P07 — GPIO / peripheral function |
| Pino 17 | P08 — GPIO / peripheral function |
| Pino 18 | P09 — GPIO / peripheral function |
| Pino 19 | P0A — GPIO / peripheral function |
| Pino 20 | P0B — GPIO / peripheral function |
| Pino 21 | P0C — GPIO / peripheral function |
| Pino 22 | P0D — GPIO / peripheral function |
| Pino 23 | P0E — GPIO / peripheral function |
| Pino 24 | P0F — GPIO / peripheral function |
| Pino 25 | P10 — GPIO / peripheral function |
| Pino 26 | P11 — GPIO / peripheral function |
| Pino 27 | P12 — GPIO / peripheral function |
| Pino 28 | P13 — GPIO / peripheral function |
| Pino 29 | P14 — GPIO / peripheral function |
| Pino 30 | P15 — GPIO / peripheral function |
| Pino 31 | P16 — GPIO / peripheral function |
| Pino 32 | P17 — GPIO / peripheral function |
| Pino 33 | P18 — GPIO / peripheral function |
| Pino 34 | P19 — GPIO / peripheral function |
| Pino 35 | P1A — GPIO / peripheral function |
| Pino 36 | P1B — GPIO / peripheral function |
| Pino 37 | P1C — GPIO / peripheral function |
| Pino 38 | P1D — GPIO / peripheral function |
| Pino 39 | P1E — GPIO / peripheral function |
| Pino 40 | P1F — GPIO / peripheral function |
| Pino 41 | P20 — GPIO / peripheral function |
| Pino 42 | P21 — GPIO / peripheral function |
| Pino 43 | P22 — GPIO / peripheral function |
| Pino 44 | P23 — GPIO / peripheral function |
| Pino 45 | P24 — GPIO / peripheral function |
| Pino 46 | P25 — GPIO / peripheral function |
| Pino 47 | P26 — GPIO / peripheral function |
| Pino 48 | P27 — GPIO / peripheral function |
| Pino 49 | P28 — GPIO / peripheral function |
| Pino 50 | P29 — GPIO / peripheral function |
| Pino 51 | P2A — GPIO / peripheral function |
| Pino 52 | P2B — GPIO / peripheral function |
| Pino 53 | P2C — GPIO / peripheral function |
| Pino 54 | P2D — GPIO / peripheral function |
| Pino 55 | P2E — GPIO / peripheral function |
| Pino 56 | P2F — GPIO / peripheral function |
| Pino 57 | P30 — GPIO / peripheral function |
| Pino 58 | P31 — GPIO / peripheral function |
| Pino 59 | P32 — GPIO / peripheral function |
| Pino 60 | P33 — GPIO / peripheral function |
| Pino 61 | P34 — GPIO / peripheral function |
| Pino 62 | P35 — GPIO / peripheral function |
| Pino 63 | P36 — GPIO / peripheral function |
| Pino 64 | P37 — GPIO / peripheral function |
| Pino 65 | P38 — GPIO / peripheral function |
| Pino 66 | P39 — GPIO / peripheral function |
| Pino 67 | P3A — GPIO / peripheral function |
| Pino 68 | P3B — GPIO / peripheral function |
| Pino 69 | P3C — GPIO / peripheral function |
| Pino 70 | P3D — GPIO / peripheral function |
| Pino 71 | P3E — GPIO / peripheral function |
| Pino 72 | P3F — GPIO / peripheral function |
| Pino 73 | P40 — GPIO / peripheral function |
| Pino 74 | P41 — GPIO / peripheral function |
| Pino 75 | P42 — GPIO / peripheral function |
| Pino 76 | P43 — GPIO / peripheral function |
| Pino 77 | P44 — GPIO / peripheral function |
| Pino 78 | P45 — GPIO / peripheral function |
| Pino 79 | P46 — GPIO / peripheral function |
| Pino 80 | P47 — GPIO / peripheral function |
| Pino 81 | P48 — GPIO / peripheral function |
| Pino 82 | P49 — GPIO / peripheral function |
| Pino 83 | P4A — GPIO / peripheral function |
| Pino 84 | P4B — GPIO / peripheral function |
| Pino 85 | P4C — GPIO / peripheral function |
| Pino 86 | P4D — GPIO / peripheral function |
| Pino 87 | P4E — GPIO / peripheral function |
| Pino 88 | P4F — GPIO / peripheral function |
| Pino 89 | AN00 — Analog input / ADC channel |
| Pino 90 | AN01 — Analog input / ADC channel |
| Pino 91 | AN02 — Analog input / ADC channel |
| Pino 92 | AN03 — Analog input / ADC channel |
| Pino 93 | AN04 — Analog input / ADC channel |
| Pino 94 | AN05 — Analog input / ADC channel |
| Pino 95 | AN06 — Analog input / ADC channel |
| Pino 96 | AN07 — Analog input / ADC channel |
| Pino 97 | AN08 — Analog input / ADC channel |
| Pino 98 | AN09 — Analog input / ADC channel |
| Pino 99 | AVCC — Analog supply (3.3 V/5 V) |
| Pino 100 | AVSS — Analog ground |
| Pino 101 | CAN0_TX — CAN 0 transmit |
| Pino 102 | CAN0_RX — CAN 0 receive |
| Pino 103 | CAN1_TX — CAN 1 transmit |
| Pino 104 | CAN1_RX — CAN 1 receive |
| Pino 105 | LIN_TX — LIN transmit |
| Pino 106 | LIN_RX — LIN receive |
| Pino 107 | UART_TX — UART transmit |
| Pino 108 | UART_RX — UART receive |
| Pino 109 | SCL — I2C clock |
| Pino 110 | SDA — I2C data |
| Pino 111 | MISO — SPI MISO |
| Pino 112 | MOSI — SPI MOSI |
| Pino 113 | SCK — SPI clock |
| Pino 114 | CS — SPI chip select |
| Pino 115 | TIOA0 — Timer I/O A channel 0 |
| Pino 116 | TIOB0 — Timer I/O B channel 0 |
| Pino 117 | TIOA1 — Timer I/O A channel 1 |
| Pino 118 | TIOB1 — Timer I/O B channel 1 |
| Pino 119 | INT0 — External interrupt 0 |
| Pino 120 | NC — Not connected (per datasheet) |
Aplicações típicas
MB9BF416RPMC-G-JNE2 é adequado para 6 aplicaçãos: Industrial BLDC / PMSM Motor Drives, Automotive Body ECUs with CAN/LIN, PLC and Factory Automation Controllers, HVAC and Home Appliance Control Boards, Sensor Hubs and Industrial Gateways, Inverter-Compressor Refrigeration Control.
Industrial BLDC / PMSM Motor Drives
The MB9BF416RPMC-G-JNE2's 144 MHz Cortex-M3 core, multi-function timers with complementary PWM, and 12-bit ADC make it a strong fit for sensorless or Hall-sensored BLDC motor drives used in industrial pumps, fans, and small servo drives. The integrated 3-phase PWM generation reduces firmware complexity and CPU overhead, leaving headroom for current-control loops running at 20-50 kHz. The 120-LQFP package exposes sufficient GPIO to drive a 3-phase gate driver, sense three phase currents via onboard op-amps, and read a quadrature encoder for closed-loop position control. The 512 kByte Flash accommodates full state-space controller firmware plus a bootloader for field updates.
Recomendado
Automotive Body ECUs with CAN/LIN
The MB9BF416RPMC-G-JNE2 integrates dual CAN controllers and a LIN master/slave interface, suiting it for body-control modules, seat controllers, mirror adjusters, and HVAC flap actuators. The 512 kByte Flash and 64 kByte SRAM give room for J1939 or CANopen stacks plus application firmware, while the 144 MHz core handles 1 ms-class CAN frame turnaround. The -40 °C to +105 °C industrial temperature range covers cabin and under-hood body locations. Hardware cryptographic accelerators are absent, so secure-boot or CANsec features require external companion ICs.
Recomendado
PLC and Factory Automation Controllers
The MB9BF416RPMC-G-JNE2 targets small-form-factor PLCs and distributed I/O modules with its mix of 12-bit ADC channels, UART/SPI/I2C peripherals, and CAN/LIN for industrial fieldbus. Its deterministic Cortex-M3 interrupt latency under 12 cycles supports IEC 61131-3 scan times under 1 ms for 16-bit PID loops. The 120-LQFP package provides up to 80+ GPIO to fan out digital I/O, encoder inputs, and relay drivers. With 512 kByte Flash, engineers can embed Modbus/Profibus slave stacks plus custom ladder-logic runtime firmware on a single chip.
Recomendado
HVAC and Home Appliance Control Boards
The MB9BF416RPMC-G-JNE2 is well suited for variable-speed compressor drives, air-handler fan controllers, and washing-machine inverter boards. Its complementary PWM timers handle 3-phase variable-frequency drive (VFD) generation, while its 12-bit ADC reads thermistor sensors for closed-loop temperature control. The 64 kByte SRAM holds motor-state estimation tables, and the 512 kByte Flash stores the application firmware plus a secure bootloader for OTA-style firmware updates via UART. Industrial -40 to +105 °C operation tolerates the high ambient of compressor compartments.
Recomendado
Sensor Hubs and Industrial Gateways
With dual CAN, LIN, UART, SPI, and I2C peripherals, the MB9BF416RPMC-G-JNE2 can aggregate data from multiple sensor networks and forward it to a higher-level controller or cloud gateway. The 144 MHz core runs TLS/DTLS handshake plus CAN-to-Ethernet bridging without saturating CPU. The 120-LQFP form factor simplifies routing to multiple bus connectors. Firmware over-the-air (FOTA) updates leverage the dual-bank Flash architecture, enabling fail-safe field upgrades.
Recomendado
Inverter-Compressor Refrigeration Control
The MB9BF416RPMC-G-JNE2 drives variable-speed compressor inverters for refrigerators, freezers, and small chillers by combining complementary PWM outputs with 12-bit ADC feedback for current and temperature sensing. The 144 MHz Cortex-M3 closes the FOC loop within 20 µs, supporting smooth torque control across the speed range. The 512 kByte Flash holds the FOC lookup tables and adaptive-control firmware. -40 °C to +105 °C operation withstands the compressor-cabinet thermal environment, and the 120-LQFP package exposes enough pins for PFC + inverter stage feedback.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MB9BF416RPMC-G-JNE2 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | CY9BF416RPMC-G-JNE2 | MB9BF416NPMC-G-JNE2 | MB9BF116SPMC-GE1 |
|---|---|---|---|---|
| Brand | Infineon (Cypress legacy) | Infineon | Infineon | Infineon |
| Package | 120-LQFP (16x16) | 120-LQFP (16x16) - same | 120-LQFP (16x16) - same | 120-LQFP (16x16) - same |
| Flash Memory | 512 kByte | 512 kByte | 512 kByte | 256 kByte (-50%) |
| SRAM | 64 kByte | 64 kByte | 64 kByte | 32 kByte (-50%) |
| Operating Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Positioning | General industrial motor control | Longevity commitment, re-marked | CAN/LIN networked ECU | Lower-cost FM3 variant |
Principais diferenciais
- Infineon/Cypress FM3 longevity program coverage (vs MB9BF116SPMC-GE1)
- Extended industrial temperature range (vs CY9BF416RPMC-G-JNE2)
- Dual CAN + LIN plus 12-bit ADC for motor and gateway roles (vs MB9BF116SPMC-GE1)
Notas de projeto
Use a 4-layer PCB stack-up with a continuous ground plane directly beneath the 120-LQFP footprint to minimize return-path inductance for the high-current GPIO used in motor-drive applications. Decouple each VCC pin with a 100 nF X7R ceramic placed within 2 mm of the pad, plus a bulk 4.7 µF tantalum on each supply pair. Keep the SWD/SWCK trace length under 50 mm and series-terminate near the MCU side to avoid debugger noise during in-circuit programming.
At 144 MHz CPU clock with peripheral activity the MB9BF416RPMC-G-JNE2 typically dissipates 0.5-1.2 W. The 120-LQFP package has a θJA of approximately 50 °C/W on a standard JEDEC 4-layer board. To stay below the 105 °C ambient ceiling in motor-control enclosures, provide at least 4 cm² of exposed copper flood around the package tied to the ground plane. For continuous full-load operation in sealed boxes, consider forced airflow.
Do not exceed 5.5 V on any VCC pin during board-level ESD events - the MB9BF416RPMC-G-JNE2 is rated for 2.7-5.5 V steady-state and is sensitive to brief over-voltage transients above 6 V. Add a TVS diode (e.g., SMBJ5.0A) on the main supply rail. Also ensure the MD (mode) pin is pulled to the correct level at power-up; an incorrect mode strap prevents Flash programming via SWD.
Informações de conformidade
RoHS and lead-free per Infineon product page. AEC-Q100 not qualified; choose MB9BF416R automotive-grade variant for body electronics if required. Halogen-free status not explicitly stated in available data.
