onsemi

MC14066BD - 3-18V Quad Analog Switch | onsemi | SOIC-14

Référence : MC14066BD ✓ Actif
3 V to 18 V Vdss 14-pin SOIC Package
MOQ : 1 |

MC14066BD Présentation

The onsemi MC14066BD is a 3-18 V quad analog switch and quad multiplexer integrated circuit packaged in a 14-pin SOIC. It contains four independent bilateral switches, allowing each switch to control either a digital or an analog signal. The MC14066B family is designed for signal gating, chopper, modulator, demodulator, and CMOS logic applications, while individual control inputs can switch signal excursions as large as the full supply voltage.

An analog switch is a semiconductor device that routes a signal between circuit nodes under digital control. The MC14066BD belongs to the analog switch and multiplexer hierarchy, which sits within interface ICs and broader logic semiconductor systems. Unlike a mechanical relay, its switching action is controlled by CMOS-compatible logic and is intended for compact signal-routing implementations. Its four independent switches allow one package to handle multiple gated channels without requiring four separate single-switch packages.

The key defining feature is the MC14066B family's pin-for-pin compatibility with the onsemi MC14016B. The manufacturer states that the MC14066B provides substantially lower ON resistance than the MC14016B while retaining compatibility between the two devices. Its 3-18 V operating range supports both lower-voltage CMOS logic systems and higher-voltage analog signal-routing systems. Each of the four switches has a separate control input, allowing independent routing decisions within one circuit.

The MC14066BD uses parallel MOSFET-style switch elements to provide bilateral signal paths. A control signal determines whether the corresponding path is ON or OFF, and the switched signal can travel in either direction. This bilateral behavior makes the device suitable for signal gating, multiplexed test paths, chopper functions, modulation and demodulation stages, and general CMOS logic implementations where multiple analog or logic nodes must be routed independently.

Typical uses include switching sensor outputs in industrial measurement systems, routing audio-range signals in test equipment, selecting external networks in control circuits, and implementing modulator or demodulator functions. Because the control inputs operate from the same supply family as the signal paths, system designers should account for input logic levels, permissible signal excursions, ON-resistance effects, and off-state leakage when choosing external bias and interface components.

For PCB implementation, place the device so that switched signal traces remain short and away from high-current switching nodes. Use a common ground reference and provide a clean supply connection where logic thresholds matter. Confirm the exact pin assignment, electrical limits, and recommended operating conditions in the onsemi MC14066B datasheet before finalizing signal amplitude, control timing, and external resistor values.

This page consolidates the manufacturer’s core switch characteristics, package information, pin-compatibility guidance, application contexts, and design considerations into an engineering-focused selection reference. It also distinguishes the verified MC14016B relationship from unsupported substitutions, helping designers identify where a board-level change can be evaluated without relying on a generic cross-reference listing.

Alternatives de remplacement direct pour MC14066BD — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

MC14016B

✅ Remplacement direct
📦 14-pin SOIC
Pin-for-pin compatible, but ON resistance is higher than the MC14066B; the manufacturer does not quantify the difference in the cited source

📋 Alternative de référence (hors catalogue)

MC14066BD Valeurs maximales et caractéristiques électriques

Product Type Quad analog switch and quad multiplexer
Number of Switches 4 independent switches
Switch Configuration 4 independent SPST bilateral switches
Operating Supply Voltage Range 3 V to 18 V
Boîtier 14-pin SOIC
Nombre de broches 14 pins
Type de montage Surface mount
Signal Path Bilateral; supports analog or digital signals
Control One independent control input per switch
Maximum Controlled Signal Swing Up to the full supply voltage
Logic Family CMOS
Pin Compatibility Pin-for-pin compatible with onsemi MC14016B

Guide de configuration des broches du MC14066BD 14-pin soic

Configuration des broches du MC14066BD (boîtier 14-pin soic). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 14-pin soic pour le MC14066BD

Aucune donnée de brochage détaillée disponible pour MC14066BD.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

MC14066BD convient pour 6 applications: Analog Signal Gating, Chopper and Modulator Circuits, Demodulator Signal Routing, Industrial Sensor Signal Selection, CMOS Logic Signal Routing, Test and Measurement Signal Gating.

🔧

Analog Signal Gating

The MC14066BD is appropriate when several analog or logic paths must be switched under independent control. Its four bilateral switches operate from a 3-18 V supply, and each channel has a dedicated control input, allowing a single 14-pin SOIC to replace four separate single-switch packages. This reduces board area while preserving independent routing decisions. Engineers should verify the signal amplitude, ON resistance, control thresholds, and leakage for the operating point before finalizing the analog path.

🌐

Chopper and Modulator Circuits

The four independent bilateral switches in the MC14066BD can construct switching functions used in chopper, modulator, and demodulator signal paths. Its 3-18 V operating range allows the device to operate alongside conventional CMOS logic, while signal excursions as large as the full supply voltage can be controlled. A practical design must account for control timing and switch resistance so that modulation waveform edges and amplitude remain acceptable at the intended operating conditions.

📡

Demodulator Signal Routing

A demodulator or gain-control implementation can use the MC14066BD to route a controlled input across one of four signal paths. Each switch has an independent control input, permitting separate timing and routing decisions within a compact 14-pin SOIC footprint. Because the device is bilateral, the switch paths are not restricted to a one-way signal direction. Confirm the acceptable logic levels and permitted signal excursion in the onsemi MC14066B datasheet when operating near supply limits.

🏭

Industrial Sensor Signal Selection

The MC14066BD can gate sensor signals or select among conditioned measurement paths in industrial equipment. Four independently controlled channels provide useful routing flexibility, and the 3-18 V supply range supports both logic-level control and higher-voltage systems. The 14-pin SOIC package simplifies board-level integration, but signal integrity depends on keeping switched traces short, providing a stable ground reference, and reviewing leakage and ON resistance at the actual sensor amplitude.

🖥️

CMOS Logic Signal Routing

The MC14066BD is suitable for CMOS logic routing because each of its four switches is independently controlled and can handle digital as well as analog signals. The device supports bidirectional paths, making it useful when a logic node must be connected to one of several destinations. Its 3-18 V range spans common CMOS supply environments. Designers should use the manufacturer control-input thresholds to guarantee reliable recognition of every logic state and should avoid excessive loading on the switched node.

📺

Test and Measurement Signal Gating

Instrumentation designs can use the MC14066BD to gate or multiplex test signals among multiple circuit paths. Independent controls allow each of the four bilateral switches to represent a separately managed routing function, while the 14-pin SOIC package limits board area. When switching low-level or high-impedance signals, review ON resistance, leakage, control timing, and the maximum controlled signal excursion in the datasheet. Keep sensitive routes short and isolated from noisy switching nodes to preserve measurement quality.

What is the MC14066BD?
The MC14066BD is an onsemi 3-18 V quad analog switch and quad multiplexer in a 14-pin SOIC package. According to the onsemi MC14066B datasheet, it contains four independent bilateral switches, each with its own control input. The switches can route either analog or digital signals and are commonly used for gating, chopper, modulator, demodulator, and CMOS logic implementations.
What is the operating voltage of the MC14066BD?
The MC14066BD operates across a 3 V to 18 V supply range. The onsemi product information identifies the MC14066B as a 3-18 V analog switch, making it suitable for CMOS-compatible systems spanning conventional low-voltage logic and higher-voltage analog-routing circuits. Signal amplitudes and control levels must remain within the limits defined in the manufacturer datasheet.
How many switches are in the MC14066BD?
The MC14066BD contains four independent switches. According to the onsemi MC14066B datasheet, each switch has a separate control input and forms a bilateral path, allowing analog or digital signals to be gated in either direction. The four-channel arrangement reduces package count when a design needs multiple independently controlled routing points.
Where can I download the MC14066BD datasheet PDF?
The official MC14066BD datasheet PDF is available from onsemi at https://www.onsemi.com/pdf/datasheet/mc14066b-d.pdf. The document contains the authoritative pin description, electrical characteristics, operating limits, and timing information. Use the manufacturer document when assigning PCB signals or confirming parameters that are not stated in distributor catalog summaries.
Where can I find the MC14066BD pinout?
The MC14066BD pin assignment is shown in the onsemi MC14066B datasheet at https://www.onsemi.com/pdf/datasheet/mc14066b-d.pdf. The device uses a 14-pin SOIC package with four switched signal pairs and four associated control inputs, plus supply and ground connections. Use the pin-description table and package drawing together before routing the PCB.
Is the MC14066BD pin-compatible with the MC14016B?
Yes, the MC14066BD is pin-for-pin compatible with the onsemi MC14016B. The onsemi MC14066B datasheet specifically identifies this relationship and states that the MC14066B has much lower ON resistance. This makes the MC14066B the natural upgrade when the lower resistance is beneficial, although signal amplitude and operating conditions should still be checked.
What is the difference between MC14066BD and MC14016B?
The principal documented difference is ON resistance: the onsemi MC14066B has much lower ON resistance than the MC14016B while remaining pin-for-pin compatible. Both belong to the CMOS quad bilateral switch family. For circuits where switch resistance materially affects signal level, insertion loss, or drive capability, the MC14066BD is generally the preferred choice.
When should I choose the MC14066BD instead of the MC14016B?
Choose the MC14066BD when your design can benefit from the lower ON resistance documented for the MC14066B family. It is particularly relevant when switched signals are weak, when resistance creates unacceptable level loss, or when the switch path contributes to an input impedance. The MC14016B remains relevant only when its higher resistance does not affect the intended circuit.
What can replace the MC14066BD?
The MC14066BD can be replaced by the onsemi MC14016B when lower ON resistance is not required, because the manufacturer identifies the MC14016B as pin-for-pin compatible. For another manufacturer’s equivalent, use XAIPART’s Request a Quote form and request a candidate specifically qualified for the 14-pin SOIC footprint, 3-18 V range, and four-channel bilateral-switch function.
What is the best MC14066BD drop-in replacement?
The documented drop-in option is the onsemi MC14016B, which shares the 14-pin pin-for-pin arrangement but has higher ON resistance. No additional cross-manufacturer replacement is established here. Submit the target MPN, operating voltages, signal range, control logic, and required bandwidth through the Request a Quote form for a component-specific compatibility review.
Is there an onsemi equivalent with the same 14-pin SOIC footprint?
The onsemi MC14016B is the directly documented equivalent in a comparable 14-pin arrangement, and it is pin-for-pin compatible with the MC14066B. Its important trade-off is higher ON resistance. If that increase is unacceptable for the switched signal, retain the MC14066BD or request engineering review of another candidate through XAIPART.
Can MC14066BD switch analog signals?
Yes, the MC14066BD is designed to control either analog or digital signals. Its four bilateral switches can support signal gating, chopper, modulator, demodulator, and CMOS logic applications. The manufacturer also states that input swings as large as the full supply voltage can be controlled, subject to the electrical operating limits in the datasheet.
Where can I buy MC14066BD online?
Use the Request a Quote form on this page to request MC14066BD availability, current lead time, minimum order quantity, and shipment configuration from XAIPART. The form lets the quote team confirm the exact 14-pin SOIC ordering code and quantity needed for production, prototype, or ongoing maintenance requirements without relying on a stale catalog figure.
What is the price of the MC14066BD?
Current MC14066BD pricing is best obtained through XAIPART’s Request a Quote form because commercial pricing can vary with quantity and shipment configuration. Enter the required quantity and package format in the form to receive a current quote for the exact MC14066BD ordering code and expected delivery schedule.
What is the lead time for the MC14066BD?
Request the current MC14066BD lead time through XAIPART’s Request a Quote form, including your required quantity and production date. Lead time depends on inventory, device traceability, and order volume. A quantity-qualified quotation provides the most actionable schedule for planning PCB assembly, inspection, and electronic component procurement activities.
Is the MC14066BD in stock?
Check current MC14066BD availability through XAIPART’s Request a Quote form. Include the required quantity, acceptable ship date, and packaging preference so the quote team can confirm the current supply position. This approach provides a quantity-specific response for the exact 14-pin SOIC device instead of relying on an unqualified stock indication.
What are the key MC14066BD specifications engineers should know?
The MC14066BD is a 3-18 V, four-channel bilateral analog switch in a 14-pin SOIC package. It provides one control input per switch and can route analog or digital signals, including excursions as large as the full supply voltage. According to the onsemi MC14066B datasheet, it is pin-for-pin compatible with the MC14016B but has much lower ON resistance.

Données de référence d'ingénierie pour MC14066BD — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the MC14066BD when a design requires four independently controlled, bilateral analog or digital switches in a 14-pin SOIC and benefits from the family’s lower ON resistance. The device is especially useful for signal gating, chopper, modulator, demodulator, and general CMOS routing functions across a 3-18 V operating range. Choose the MC14016B only when its higher ON resistance does not affect signal level, attenuation, input impedance, or timing; it remains a documented pin-for-pin option. Before replacing the MC14066BD with any other manufacturer’s part, require the same 14-pin footprint, independent control arrangement, compatible logic thresholds, and acceptable voltage range. For applications where leakage, switching speed, or channel isolation dominates, review the complete electrical tables rather than relying only on the shared pinout.

Comparaison avec les alternatives

Paramètre Ce produit MC14016B
Brand onsemi onsemi
Package 14-pin SOIC 14-pin SOIC
ON Resistance Lower than MC14016B Higher than MC14066B
Pin Compatibility Pin-for-pin compatible with MC14016B Pin-for-pin compatible with MC14066B

Principaux différenciateurs

  • Lower ON resistance than the pin-compatible MC14016B (vs MC14016B)
  • Four independent bilateral switches in one package (vs MC14016B)
  • Three- to 18-volt operating range (vs MC14016B)

Notes de conception

Do not select the MC14016B as a substitute without checking the ON-resistance difference. The onsemi MC14066B datasheet states that the MC14066B is pin-for-pin compatible with the MC14016B but has much lower ON resistance. The substitution is therefore electrically attractive for routing, yet it can change signal attenuation, level loss, and effective source impedance. Confirm the numerical resistance under the intended supply and control voltages before approving the change.

Keep switched-node traces short and avoid routing them beside high-current or fast-switching nets. Although the MC14066BD supports signal swings as large as the full supply voltage, capacitance introduced by long PCB traces can increase control-edge timing effects and allow coupling into the gated signal. Use a continuous ground reference, minimize loop area, and place the device close to the signal source when working with low-level or high-impedance paths.

Assign every connection from the 14-pin SOIC pin-description table before routing the board, including the four control inputs, four bilateral switch paths, supply, and ground. Do not infer a pin assignment from the four-channel functional description alone. Preserve a straightforward flow from the controller outputs to the control pins and maintain a low-impedance ground connection so that the CMOS switching thresholds remain predictable under noisy or high-impedance conditions.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The onsemi product page and MC14066B datasheet are the authoritative sources for environmental and material compliance. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status for the exact MC14066BD ordering code were not confirmed.

Recherches associées

MC14066BD datasheet MC14066BD pinout MC14066BD datasheet pdf MC14066BD equivalent MC14066BD replacement MC14066BD cross reference MC14066BD price MC14066BD stock onsemi MC14066BD MC14066BD vs MC14016B MC14066BD SOIC-14 pinout MC14066BD analog switch application

Composants & termes associés

onsemi MC14066BD MC14066B MC14016B quad analog switch quad multiplexer bilateral switch interface IC logic IC CMOS MOSFET switch signal gating chopper modulator demodulator ON resistance off-state leakage control-input threshold 3-18 V supply range 14-pin SOIC SOIC package family surface-mount package surface-mount device SMD
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ