NXP Semiconductors

MC33388DR2 - 14-SOIC CANbus Transceiver | NXP

Référence : MC33388DR2 ✗ Fin de vie
SOP Package
MOQ : 1 |

MC33388DR2 Présentation

The NXP Semiconductors MC33388DR2 is a CANbus physical-layer controller interface packaged in a 14-pin SOIC. It is designed for the physical layer of Controller Area Network communication systems, where it connects a CAN controller or host transceiver logic to a differential bus. The confirmed package is 14-SOIC with a 0.154 inch, 3.90 mm body width, and the device is associated with automotive temperature-grade identification in the product listing.

A CANbus physical-layer controller interface, commonly called a CAN transceiver, is the bridge between a digital CAN protocol controller and the physical differential network. The transceiver translates controller-side logic signals into bus-level signals and receives bus states for the controller. This function belongs to the interface IC hierarchy, supporting in-vehicle networking, industrial automation, transportation equipment, and other embedded systems that use the CAN communication standard.

The MC33388 family is positioned for applications requiring a dedicated CAN physical-layer interface in a compact surface-mount package. The MC33388DR2 order code identifies a 14-pin SOIC device, while the DR2 suffix also denotes the manufacturer's reel-oriented ordering configuration. The confirmed electrical details that can be established from the product records include the 14-pin SOIC package, gull-wing terminal form, rectangular package shape, and automotive temperature grade.

The principal system benefit is integration: placing the physical-layer interface close to the CAN controller reduces the number of external interface components and standardizes the logic-to-bus boundary. Automotive and industrial equipment designers must still account for bus termination, common-mode voltage behavior, ESD protection, ground quality, and the electrical limits specified by the manufacturer. The CAN bus itself normally requires termination resistors at both ends of the network, while the transceiver manages differential signaling rather than replacing those resistors.

MC33388DR2 is appropriate for embedded automotive modules, industrial controllers, sensor gateways, motor-control systems, and other CAN-connected products. In a typical design, the device is placed near the CAN controller and connector, its supply and ground pins connect to the local regulated power network, and its differential CANH and CANL pins connect to the protected bus. Component placement should minimize loop area and keep high-current return paths separate from sensitive analog and reference circuitry.

A key design consideration is that obsolete or legacy interface ICs may require a product-lifecycle review before new production use. The available product records also show distributor availability descriptions, so procurement should be coordinated with the current manufacturer status and the required quantity. For a new design, the manufacturer datasheet should be checked for recommended transceiver, termination, decoupling, and PCB-layout arrangements before the footprint is released.

This page organizes the confirmed package, ordering, application, and replacement information for MC33388DR2. It also distinguishes device identity from generic cross-reference results, helping engineers identify a package-compatible source before requesting a quote through the Request a Quote form on this page.

Alternatives de remplacement direct pour MC33388DR2 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec MC33388DR2 (même facteur de forme et même empreinte) — différant par Product Type.

NXP Semiconductors
Product Type: Automotive fault-tolerant CAN physical-layer interface
Comparer avec MC33388DR2 →

MC33388D

✅ Remplacement direct ⚠️ Spécifications non vérifiées
NXP Semiconductors
📦 14-SOIC
Automotive fault-tolerant CAN physical-layer interface · CAN Interface · Fault-tolerant differential CAN interface · 4.75 V to 5.25 V · 5 mA · Up to 1.5 V · 14-SOIC · 14 pins

Contactez-nous pour le prix

Voir la fiche technique →

MC33388DP

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 14-SOIC
Automotive-temperature MC33388 14-SOIC ordering variant; DR2 tape-and-reel suffix versus DP package form

📋 Alternative de référence (hors catalogue)

MC33388DT

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 14-SOIC
MC33388 14-SOIC ordering variant; DT package form versus DR2 reel-oriented suffix

📋 Alternative de référence (hors catalogue)

MC33388DR2

✅ Remplacement direct ⚠️ Spécifications non vérifiées
NXP Semiconductors
📦 14-SOIC
CANbus physical-layer controller interface · NXP Semiconductors · Motorola · SOP · 14-SOIC · 14 pins · 0.154 inch (3.90 mm) · Rectangular

Contactez-nous pour le prix

Voir la fiche technique →

MC33388DTA

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 14-SOIC
MC33388 14-SOIC ordering variant; DTA package form versus DR2 reel-oriented suffix

📋 Alternative de référence (hors catalogue)

MC33388DR2 Spécifications

Product Type CANbus physical-layer controller interface
Manufacturer NXP Semiconductors
Legacy Manufacturer Motorola
Package Code SOP
Package Type 14-SOIC
Number of Terminals 14 pins
Package Body Width 0.154 inch (3.90 mm)
Package Shape Rectangular
Terminal Form Gull wing
Type de montage Surface mount
Temperature Grade Automotive
Communication Interface CANbus physical layer

Guide de configuration des broches du MC33388DR2 rectangular

Configuration des broches du MC33388DR2 (boîtier rectangular). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier rectangular pour le MC33388DR2

Aucune donnée de brochage détaillée disponible pour MC33388DR2.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

MC33388DR2 convient pour 6 applications: Automotive Body Control Module, Industrial Sensor Gateway, Motor Control and Actuator Hub, Industrial Machinery Network, Vehicle Diagnostic Gateway, Embedded CAN Communication Module.

🚗

Automotive Body Control Module

The MC33388DR2 fits an automotive body-control module that must communicate with distributed door, lighting, seating, and climate-control nodes over a CAN network. Its confirmed 14-SOIC package and automotive temperature-grade identification align with compact automotive controller boards where a dedicated physical-layer interface is required between a CAN controller and the bus. Place the transceiver near the CAN controller and connector, keep CANH and CANL routing short, and provide local supply decoupling. Because the device is obsolete, reuse should be limited to an approved lifecycle plan with traceable stock.

🏭

Industrial Sensor Gateway

MC33388DR2 can serve as the CAN physical-layer interface in an industrial sensor gateway that collects measurements from remote motor, pressure, temperature, and proximity nodes. The 14-SOIC footprint supports compact control boards, while the CANbus controller-interface function provides the physical signaling boundary for a multi-node network. The layout should isolate the bus route from sensitive sensor circuitry, use a solid ground reference, and follow the manufacturer bus-routing recommendations. For new gateways, assess the obsolete lifecycle status carefully and compare an actively supported transceiver before committing the design.

⚡

Motor Control and Actuator Hub

The MC33388DR2 is suitable for a motor-control or actuator hub that exchanges commands and diagnostic information with an embedded CAN controller. The device provides the physical-layer interface required to join the controller's logic signals to a differential CAN bus, enabling coordinated operation across multiple motors or actuators. Keep the transceiver and its decoupling close to the controller, route CANH and CANL as a controlled differential pair, and provide suitable protection at external connectors. The automotive temperature-grade identity supports harsh environments, subject to final qualification review.

🔧

Industrial Machinery Network

MC33388DR2 can be incorporated into industrial machinery networking where sensors, drives, and operator panels share a CAN-based control bus. Its compact 14-SOIC package leaves board area for the controller, analog front end, and power management, while its physical-layer function supports deterministic network communication. Designers should use a low-impedance ground structure, separate noisy switching-current paths from the transceiver ground reference, and verify termination and protection against the actual cable length and topology. A lifecycle exception is needed if this obsolete device is specified for new production equipment.

🚙

Vehicle Diagnostic Gateway

The MC33388DR2 fits a vehicle diagnostic gateway that connects an embedded CAN controller to a vehicle network carrying powertrain, chassis, or body diagnostics. Its automotive temperature-grade identity and compact 14-SOIC package support integration near a network connector or controller. Keep the transceiver supply quiet, place input and output bypass capacitors according to the manufacturer circuit, and include connector protection against external transients. For a new diagnostic platform, evaluate a currently supported transceiver with documented automotive qualification rather than expanding dependence on an obsolete interface IC.

🧩

Embedded CAN Communication Module

MC33388DR2 can be used in a compact embedded communication module that adds a CAN physical layer to a microcontroller or application processor. The 14-SOIC package is practical for mixed-signal and industrial control boards, while the interface IC bridges controller logic and the differential bus. Place the device near the controller to minimize interface delay, provide a local ground and supply return path, and keep external bus protection close to the connector. Any new module should include an alternative-part review because the target's obsolete lifecycle may affect long-term availability and production continuity.

What is the MC33388DR2?
The MC33388DR2 is an NXP Semiconductors CANbus physical-layer controller interface in a 14-SOIC package. The product listing identifies it as a CANbus Physical Layer Controller Interface with 14 leads and a 0.154 inch, 3.90 mm wide package. It is used to connect CAN controller logic to a differential CAN bus in automotive and industrial control systems.
What package does the MC33388DR2 use?
The MC33388DR2 uses a 14-pin SOIC package with gull-wing leads and a rectangular body. The confirmed body width is 0.154 inch, or 3.90 mm. Before placing a PCB footprint, verify the land pattern and pin numbering against the manufacturer datasheet, because package body dimensions alone do not define the recommended copper land geometry.
Where can I download the MC33388DR2 datasheet PDF?
An MC33388DR2 datasheet PDF is available from the NXP-linked datasheet record at https://www.datasheets.com/nxp/mc33388dr2, with another downloadable copy at https://www.icdirectory.com/d/integrated-circuits/mc33388dr2.pdf. Use the manufacturer document for authoritative electrical limits, pin descriptions, timing information, recommended application circuits, and package drawings.
Where can I find the MC33388DR2 pinout?
The MC33388DR2 pinout is found in the manufacturer datasheet's pin-description table and package drawing. The device has 14 terminals in a SOIC package, but individual pin names are not printed in the available product records. Assign PCB tracks from the datasheet pin table rather than relying on a generic SOIC drawing, because supply, ground, mode-control, and CAN bus functions must match the exact lead numbering.
What is the difference between MC33388DR2 and MC33388D?
The MC33388DR2 is identified as the 14-SOIC, reel-configured member of the MC33388 family, while MC33388D is the base 14-SOIC ordering designation. The available records do not expose a complete electrical comparison, so no voltage, data-rate, or immunity difference should be assumed. Treat them as orderable variants only after confirming the manufacturer ordering table and datasheet.
What is the best drop-in replacement for MC33388DR2?
The MC33388D is the closest same-family 14-SOIC alternative, but the available records do not confirm every electrical characteristic required to guarantee a drop-in replacement. Confirm pinout, supply voltage, CAN data rate, standby behavior, common-mode range, ESD ratings, and transceiver mode configuration in the manufacturer datasheet. The Request a Quote form on this page can be used for stock and sourcing support.
Can MC33388D replace MC33388DR2?
MC33388D can be considered for a replacement review because it belongs to the same NXP MC33388 family and uses the 14-SOIC package, but pin-to-pin drop-in status is not proven by the available product records. Verify the exact pin functions and operating limits before substitution. Also confirm whether DR2 denotes an automotive-grade ordering option that the base MC33388D does not satisfy.
Is the MC33388DR2 obsolete?
The MC33388DR2 datasheet record identifies the part as obsolete, although separate distributor listings still show inventory and product records. For an existing supported design, request current availability and lifecycle confirmation through the Request a Quote form on this page. For a new design, choose an actively supported CAN transceiver unless an approved lifecycle exception is already in place.
Where to buy MC33388DR2 online?
Use the Request a Quote form on this page to request MC33388DR2 availability, quantity breaks, and lead time. The product records identify NXP Semiconductors and former Motorola naming, with inventory reported at different channels. A quotation request lets the sourcing team confirm exact suffix, reel packaging, condition, and current production or remaining-stock status before an order is placed.
What is the price of MC33388DR2?
MC33388DR2 pricing depends on quantity, condition, suffix, and current remaining-stock status, so use the Request a Quote form on this page for the current unit and volume pricing. The available records describe the device as obsolete and show inventory through several listings, but they do not present a qualifying printed quantity-break table that can be reproduced as structured pricing evidence.
What is the lead time for MC33388DR2?
Current lead time for MC33388DR2 must be confirmed through the Request a Quote form on this page because remaining inventory, reel traceability, and obsolete-part allocation can change rapidly. Request the quoted lead time together with factory-sealed packaging information, lot traceability, date-code information, and the quantity required for your production schedule.
Is MC33388DR2 in stock?
MC33388DR2 appears in current product listings with reported inventory, but availability is not guaranteed until an order is confirmed. Use the Request a Quote form on this page to request the latest on-hand quantity and lead time. Because the device is listed as obsolete, confirm whether the offered units are new, original manufacturer stock, and properly reel-packed.
MC33388DR2 versus MC33388D: which is better for automotive use?
MC33388DR2 is the better starting candidate for automotive use because its product record explicitly identifies an automotive temperature grade, while no equivalent qualification detail is shown for MC33388D. The choice is appropriate only if the DR2 part also meets the required automotive qualification, environmental, traceability, and change-control requirements for the vehicle platform.
When should I choose MC33388DR2 over another CAN transceiver?
Choose MC33388DR2 when an existing design specifically requires the NXP MC33388 14-SOIC interface, the automotive temperature-grade identity, and an approved obsolete-part supply plan. Do not choose it automatically for a new design because its lifecycle status is obsolete. For new platforms, compare an actively supported transceiver with equivalent pinout, supply voltage, data rate, common-mode range, standby mode, and automotive qualification requirements.
Is MC33388DR2 suitable for industrial CAN equipment?
MC33388DR2 can be used in industrial CAN equipment when its confirmed electrical ratings, automotive temperature grade, and approved supply status satisfy the system requirements. The 14-SOIC package supports compact controller boards, while the CANbus physical-layer interface suits distributed sensor, actuator, and machinery-control networks. Validate EMC, isolation, grounding, and bus-protection requirements against the manufacturer application guidance.
What are the key specifications of MC33388DR2 that engineers should know?
MC33388DR2 is a NXP Semiconductors CANbus physical-layer controller interface in a 14-SOIC package. Confirmed attributes include 14 terminals, a 0.154 inch or 3.90 mm body width, gull-wing terminals, rectangular package construction, surface mounting, and automotive temperature-grade identification. Supply voltage, data rate, exact pin names, and protection ratings must be taken from the manufacturer datasheet.
What is the best NXP equivalent for MC33388DR2?
MC33388D is the closest NXP family candidate because it retains the 14-SOIC package and the same MC33388 device family. It should not be treated as a guaranteed drop-in replacement until the datasheet confirms identical pin functions and electrical limits, particularly the supply range, data rate, standby modes, bus pins, and automotive-grade requirements. Request sourcing support with the Request a Quote form on this page.
What can replace MC33388DR2 in a CAN interface design?
MC33388D, MC33388DP, and MC33388DT are the closest same-family 14-SOIC candidates for a replacement review, but only MC33388D and MC33388DP are sufficiently identified as 14-SOIC ordering variants in the available context. A qualified replacement must match the original pinout, supply voltage, CAN data rate, common-mode range, mode-control behavior, and temperature class. No cross-brand part is presented as a confirmed drop-in equivalent.

Données de référence d'ingénierie pour MC33388DR2 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose MC33388DR2 when maintaining an existing NXP MC33388-based design that specifically calls out the DR2 order code, 14-SOIC footprint, and automotive temperature-grade identity. MC33388D is the logical same-family starting point for a replacement review when the tape-and-reel suffix is the only difference, but the manufacturer ordering table and datasheet must confirm that the pinout and electrical limits are unchanged. MC33388DP, MC33388DT, and MC33388DTA can also be reviewed as same-family ordering candidates, subject to verified package, temperature, qualification, and supply details. Do not select a cross-brand CAN transceiver solely because it also uses SOIC packaging; a qualified substitute must match pinout, supply voltage, data rate, common-mode range, standby behavior, and protection requirements. For new production designs, an actively supported transceiver should normally be preferred over this obsolete device.

Comparaison avec les alternatives

Paramètre Ce produit MC33388D MC33388DP MC33388DT MC33388DR2 MC33388DTA
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 14-SOIC 14-SOIC 14-SOIC 14-SOIC 14-SOIC 14-SOIC
Product Type CANbus physical-layer controller interface CANbus physical-layer controller interface CANbus physical-layer controller interface CANbus physical-layer controller interface CANbus physical-layer controller interface CANbus physical-layer controller interface
Number of Terminals 14 pins 14 pins 14 pins 14 pins 14 pins 14 pins
Terminal Form Gull wing Gull wing Gull wing Gull wing Gull wing Gull wing
Package Shape Rectangular Rectangular Rectangular Rectangular Rectangular Rectangular
Body Width 0.154 inch (3.90 mm) 0.154 inch (3.90 mm) 0.154 inch (3.90 mm) 0.154 inch (3.90 mm) 0.154 inch (3.90 mm) 0.154 inch (3.90 mm)
Ordering Configuration DR2 reel-oriented suffix Base order code DP package form DT package form DR2 reel-oriented suffix DTA package form

Principaux différenciateurs

  • Automotive-grade ordering identity (vs MC33388D)
  • Compact 14-pin SOIC implementation (vs MC33388DT)
  • Direct CAN physical-layer integration (vs KSZ8041MLL-TR)
  • Established automotive product identity (vs TJA1057GTK/3Z)

Notes de conception

Place the MC33388DR2 close to the CAN controller and place the network-side protection components near the connector. Keep the CANH and CANL traces short, route them together, provide a continuous ground reference, and avoid sharing return-current paths with high-current motor or switching nodes. This arrangement limits radiated noise and helps the transceiver receive weak differential signals reliably.

Follow the manufacturer application circuit for supply bypassing and place the required input and output capacitors directly across their corresponding pins. Keep the transceiver's ground connection close to the device and connect it to the low-impedance ground region used by the CAN controller. An unstable or noisy supply can impair communication even when the bus wiring and termination are correct.

Do not treat CAN termination as part of the transceiver. The standard network normally uses termination at both ends of the bus, and excessive or missing termination can distort signals. Also verify the device's mode-control and standby settings, exact CANH and CANL pins, and connector-side transient protection against the manufacturer datasheet before releasing the PCB layout.

Because MC33388DR2 is obsolete, do not introduce it into a new production design without an approved lifecycle exception. Confirm the exact MPN, temperature grade, automotive qualification, reel packaging, date code, and remaining manufacturer stock. For an existing design, document a last-time-buy or alternate-source plan while preserving the approved electrical and pin-compatibility requirements.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Qualified
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The product record identifies an automotive temperature grade but does not explicitly confirm AEC-Q100 qualification, RoHS, REACH, lead-free status, halogen-free status, or conflict-minerals compliance.

Données vérifiées le : 2026-11-16 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

MC33388DR2 datasheet MC33388DR2 pinout MC33388DR2 datasheet pdf MC33388DR2 equivalent MC33388DR2 replacement MC33388DR2 price MC33388DR2 stock NXP MC33388DR2 MC33388 14-SOIC CAN transceiver MC33388DR2 automotive CAN interface MC33388DR2 vs MC33388D MC33388DR2 footprint

Composants & termes associés

NXP Semiconductors Motorola MC33388DR2 MC33388D MC33388DP MC33388DT MC33388DTA CAN transceiver CANbus physical-layer controller interface Controller Area Network interface IC network interface 14-SOIC SOIC package family surface-mount package gull-wing lead differential signaling CANH CANL automotive temperature grade industrial automation vehicle networking embedded CAN controller obsolete component RoHS
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ