MC33388DR2 - 14-SOIC CANbus Transceiver | NXP
MPN: MC33388DR2 ✗ Son Kullanım ZamanıMC33388DR2 Genel Bakış
A CANbus physical-layer controller interface, commonly called a CAN transceiver, is the bridge between a digital CAN protocol controller and the physical differential network. The transceiver translates controller-side logic signals into bus-level signals and receives bus states for the controller. This function belongs to the interface IC hierarchy, supporting in-vehicle networking, industrial automation, transportation equipment, and other embedded systems that use the CAN communication standard.
The MC33388 family is positioned for applications requiring a dedicated CAN physical-layer interface in a compact surface-mount package. The MC33388DR2 order code identifies a 14-pin SOIC device, while the DR2 suffix also denotes the manufacturer's reel-oriented ordering configuration. The confirmed electrical details that can be established from the product records include the 14-pin SOIC package, gull-wing terminal form, rectangular package shape, and automotive temperature grade.
The principal system benefit is integration: placing the physical-layer interface close to the CAN controller reduces the number of external interface components and standardizes the logic-to-bus boundary. Automotive and industrial equipment designers must still account for bus termination, common-mode voltage behavior, ESD protection, ground quality, and the electrical limits specified by the manufacturer. The CAN bus itself normally requires termination resistors at both ends of the network, while the transceiver manages differential signaling rather than replacing those resistors.
MC33388DR2 is appropriate for embedded automotive modules, industrial controllers, sensor gateways, motor-control systems, and other CAN-connected products. In a typical design, the device is placed near the CAN controller and connector, its supply and ground pins connect to the local regulated power network, and its differential CANH and CANL pins connect to the protected bus. Component placement should minimize loop area and keep high-current return paths separate from sensitive analog and reference circuitry.
A key design consideration is that obsolete or legacy interface ICs may require a product-lifecycle review before new production use. The available product records also show distributor availability descriptions, so procurement should be coordinated with the current manufacturer status and the required quantity. For a new design, the manufacturer datasheet should be checked for recommended transceiver, termination, decoupling, and PCB-layout arrangements before the footprint is released.
This page organizes the confirmed package, ordering, application, and replacement information for MC33388DR2. It also distinguishes device identity from generic cross-reference results, helping engineers identify a package-compatible source before requesting a quote through the Request a Quote form on this page.
Drop-in alternatifler için MC33388DR2 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller MC33388DR2 (aynı form faktörü ve ayağa oturma) — farklı olan Product Type.
MC33388D
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MC33388DP
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
MC33388DT
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
MC33388DR2
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MC33388DTA
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
MC33388DR2 Özellikler
| Product Type | CANbus physical-layer controller interface |
| Manufacturer | NXP Semiconductors |
| Legacy Manufacturer | Motorola |
| Package Code | SOP |
| Package Type | 14-SOIC |
| Number of Terminals | 14 pins |
| Package Body Width | 0.154 inch (3.90 mm) |
| Package Shape | Rectangular |
| Terminal Form | Gull wing |
| Montaj Türü | Surface mount |
| Temperature Grade | Automotive |
| Communication Interface | CANbus physical layer |
MC33388DR2 rectangular Pin Yapısı Kılavuzu
MC33388DR2 (rectangular paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: MC33388DR2.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
MC33388DR2 için uygundur 6 uygulamas: Automotive Body Control Module, Industrial Sensor Gateway, Motor Control and Actuator Hub, Industrial Machinery Network, Vehicle Diagnostic Gateway, Embedded CAN Communication Module.
Automotive Body Control Module
The MC33388DR2 fits an automotive body-control module that must communicate with distributed door, lighting, seating, and climate-control nodes over a CAN network. Its confirmed 14-SOIC package and automotive temperature-grade identification align with compact automotive controller boards where a dedicated physical-layer interface is required between a CAN controller and the bus. Place the transceiver near the CAN controller and connector, keep CANH and CANL routing short, and provide local supply decoupling. Because the device is obsolete, reuse should be limited to an approved lifecycle plan with traceable stock.
Önerilen
Industrial Sensor Gateway
MC33388DR2 can serve as the CAN physical-layer interface in an industrial sensor gateway that collects measurements from remote motor, pressure, temperature, and proximity nodes. The 14-SOIC footprint supports compact control boards, while the CANbus controller-interface function provides the physical signaling boundary for a multi-node network. The layout should isolate the bus route from sensitive sensor circuitry, use a solid ground reference, and follow the manufacturer bus-routing recommendations. For new gateways, assess the obsolete lifecycle status carefully and compare an actively supported transceiver before committing the design.
Önerilen
Motor Control and Actuator Hub
The MC33388DR2 is suitable for a motor-control or actuator hub that exchanges commands and diagnostic information with an embedded CAN controller. The device provides the physical-layer interface required to join the controller's logic signals to a differential CAN bus, enabling coordinated operation across multiple motors or actuators. Keep the transceiver and its decoupling close to the controller, route CANH and CANL as a controlled differential pair, and provide suitable protection at external connectors. The automotive temperature-grade identity supports harsh environments, subject to final qualification review.
Önerilen
Industrial Machinery Network
MC33388DR2 can be incorporated into industrial machinery networking where sensors, drives, and operator panels share a CAN-based control bus. Its compact 14-SOIC package leaves board area for the controller, analog front end, and power management, while its physical-layer function supports deterministic network communication. Designers should use a low-impedance ground structure, separate noisy switching-current paths from the transceiver ground reference, and verify termination and protection against the actual cable length and topology. A lifecycle exception is needed if this obsolete device is specified for new production equipment.
Önerilen
Vehicle Diagnostic Gateway
The MC33388DR2 fits a vehicle diagnostic gateway that connects an embedded CAN controller to a vehicle network carrying powertrain, chassis, or body diagnostics. Its automotive temperature-grade identity and compact 14-SOIC package support integration near a network connector or controller. Keep the transceiver supply quiet, place input and output bypass capacitors according to the manufacturer circuit, and include connector protection against external transients. For a new diagnostic platform, evaluate a currently supported transceiver with documented automotive qualification rather than expanding dependence on an obsolete interface IC.
Önerilen
Embedded CAN Communication Module
MC33388DR2 can be used in a compact embedded communication module that adds a CAN physical layer to a microcontroller or application processor. The 14-SOIC package is practical for mixed-signal and industrial control boards, while the interface IC bridges controller logic and the differential bus. Place the device near the controller to minimize interface delay, provide a local ground and supply return path, and keep external bus protection close to the connector. Any new module should include an alternative-part review because the target's obsolete lifecycle may affect long-term availability and production continuity.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: MC33388DR2 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | MC33388D | MC33388DP | MC33388DT | MC33388DR2 | MC33388DTA |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC |
| Product Type | CANbus physical-layer controller interface | CANbus physical-layer controller interface | CANbus physical-layer controller interface | CANbus physical-layer controller interface | CANbus physical-layer controller interface | CANbus physical-layer controller interface |
| Number of Terminals | 14 pins | 14 pins | 14 pins | 14 pins | 14 pins | 14 pins |
| Terminal Form | Gull wing | Gull wing | Gull wing | Gull wing | Gull wing | Gull wing |
| Package Shape | Rectangular | Rectangular | Rectangular | Rectangular | Rectangular | Rectangular |
| Body Width | 0.154 inch (3.90 mm) | 0.154 inch (3.90 mm) | 0.154 inch (3.90 mm) | 0.154 inch (3.90 mm) | 0.154 inch (3.90 mm) | 0.154 inch (3.90 mm) |
| Ordering Configuration | DR2 reel-oriented suffix | Base order code | DP package form | DT package form | DR2 reel-oriented suffix | DTA package form |
Ana Farklılayıcılar
- Automotive-grade ordering identity (karşılaştırma:MC33388D)
- Compact 14-pin SOIC implementation (karşılaştırma:MC33388DT)
- Direct CAN physical-layer integration (karşılaştırma:KSZ8041MLL-TR)
- Established automotive product identity (karşılaştırma:TJA1057GTK/3Z)
Tasarım Notları
Place the MC33388DR2 close to the CAN controller and place the network-side protection components near the connector. Keep the CANH and CANL traces short, route them together, provide a continuous ground reference, and avoid sharing return-current paths with high-current motor or switching nodes. This arrangement limits radiated noise and helps the transceiver receive weak differential signals reliably.
Follow the manufacturer application circuit for supply bypassing and place the required input and output capacitors directly across their corresponding pins. Keep the transceiver's ground connection close to the device and connect it to the low-impedance ground region used by the CAN controller. An unstable or noisy supply can impair communication even when the bus wiring and termination are correct.
Do not treat CAN termination as part of the transceiver. The standard network normally uses termination at both ends of the bus, and excessive or missing termination can distort signals. Also verify the device's mode-control and standby settings, exact CANH and CANL pins, and connector-side transient protection against the manufacturer datasheet before releasing the PCB layout.
Because MC33388DR2 is obsolete, do not introduce it into a new production design without an approved lifecycle exception. Confirm the exact MPN, temperature grade, automotive qualification, reel packaging, date code, and remaining manufacturer stock. For an existing design, document a last-time-buy or alternate-source plan while preserving the approved electrical and pin-compatibility requirements.
Uyumluluk Bilgisi
The product record identifies an automotive temperature grade but does not explicitly confirm AEC-Q100 qualification, RoHS, REACH, lead-free status, halogen-free status, or conflict-minerals compliance.