Texas Instruments

MC3486DE4 - Quad RS-422/RS-423 Differential Line Receiver | Texas Instruments

Référence : MC3486DE4 ✓ Actif
ANSI TIA/EIA-422-B, ANSI TIA/EIA-423-B, ITU V.10, ITU V.11 Rds(on) 16-SOIC (SOP-16), 0.154 inch (3.90 mm) body width Package
MOQ : 1 |

MC3486DE4 Présentation

The Texas Instruments MC3486DE4 is a monolithic quadruple differential line receiver with 3-state TTL-compatible outputs, designed to meet ANSI TIA/EIA-422-B and TIA/EIA-423-B and ITU V.10/V.11 specifications, and supplied in a 16-pin SOIC (0.154 inch, 3.90 mm wide) package.

A differential line receiver is a type of interface transceiver IC that recovers a logic signal from a balanced, differential transmission line such as RS-422 or RS-423. Its category hierarchy runs differential line receiver -> line receiver -> interface transceiver IC -> integrated circuit. Receivers are used where a sender is physically separated from the receiver by cable, where the signal has travelled through noisy industrial environments, or where several devices share one bus. Differential signalling rejects common-mode noise, and the 3-state output stage lets a controller share a single data bus between multiple receivers without bus contention.

The MC3486 offers four independent differential-input receivers in one package, with fast transition times and TTL-compatible outputs that drive standard CMOS/TTL logic directly. Because the outputs can be placed in a high-impedance state, the four channels can be muxed onto a shared data bus for multiplexing, bus arbitration, or test isolation. All four channels share common supply pins, so the device fits naturally into parallel, wide-bus architectures such as multi-drop data acquisition and instrumentation systems.

Internally, each channel consists of a differential input stage, a Schmitt-trigger style response that rejects slow-moving noise on the differential pair, and an output buffer with three drive states (high, low, high impedance). The differential threshold and common-mode range are set to suit balanced twisted-pair cabling rather than single-ended logic, which is why the device is specified against EIA/TIA-422-B and EIA/TIA-423-B instead of general-purpose logic levels.

Typical uses include industrial serial data acquisition, instrumentation and test equipment interfaces, computer-to-peripheral links, and control systems that must recover a differential signal over long cable runs. It is also commonly paired with a complementary quadruple differential line driver such as the MC3487 family, or with the MC1489/MC1488 families, to build complete balanced communication links.

When designing around the MC3486DE4, budget the enable pins and supply rails carefully: leaving an output enabled while another receiver drives the same bus node causes contention and excess current. Confirm the receiver's common-mode input range against the ground reference of the remote device, and place a termination network at the far end of the cable so the differential pair is referenced properly.

Alternatives de remplacement direct pour MC3486DE4 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec MC3486DE4 (même facteur de forme et même empreinte) — différant par Package, Logic Compatibility, Number of Channels, Operating Temperature Range, Output Type.

Texas Instruments
Package: 16-pin SOIC
Logic Compatibility: TTL-compatible outputs
Number of Channels: 4 independent differential receivers
Comparer avec MC3486DE4 →
Texas Instruments
Package: 16-pin SOIC
Logic Compatibility: TTL-compatible outputs
Number of Channels: 4 independent differential receivers
Comparer avec MC3486DE4 →
Texas Instruments
Package: 16-pin SOIC
Logic Compatibility: TTL-compatible
Operating Temperature Range: 0 C to 70 C
Comparer avec MC3486DE4 →

MC3486D

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Texas Instruments
📦 16-SOIC (SOP-16)
Quadruple differential line receiver · 4 independent differential receivers · 5 V single supply · TTL-compatible 3-state outputs · Differential · ANSI TIA/EIA-422-B and TIA/EIA-423-B; ITU V.10 and V.11 · 3-state high-impedance output control · Fast transition times; exact value not provided

Contactez-nous pour le prix

Voir la fiche technique →

MC3486DR

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Texas Instruments
📦 16-SOIC (SOP-16)
Quadruple differential line receiver · 4 independent differential receivers · 5 V single supply · TTL-compatible 3-state outputs · Differential · ANSI TIA/EIA-422-B and TIA/EIA-423-B; ITU V.10 and V.11 · 3-state high-impedance output control · Fast transition times; exact value not provided

Contactez-nous pour le prix

Voir la fiche technique →

MC3486NSR

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Texas Instruments
📦 16-SOIC (SOP-16)
Quadruple differential line receiver · 4 channels · 4 independent differential-input pairs · 5 V single supply · TTL-compatible, 3-state · TIA/EIA-422-B and TIA/EIA-423-B · ITU V.10 and V.11 · 0 C to 70 C

Contactez-nous pour le prix

Voir la fiche technique →

MC3486DE4 Spécifications

Device Type Quadruple differential line receiver with 3-state outputs
Number of Channels 4 independent differential-input receivers
Output State 3-state (high, low, high impedance)
Output Compatibility TTL-compatible outputs
Supported Standards ANSI TIA/EIA-422-B, ANSI TIA/EIA-423-B, ITU V.10, ITU V.11
Boîtier 16-SOIC (SOP-16), 0.154 inch (3.90 mm) body width
Package Code / Shape SOP, rectangular
Terminal Form Gull wing
Type de montage Surface mount
Temperature Grade Commercial
Transition Time Fast transition times (per manufacturer datasheet)

Guide de configuration des broches du MC3486DE4 sop, rectangular

Configuration des broches du MC3486DE4 (boîtier sop, rectangular). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier sop, rectangular pour le MC3486DE4

Aucune donnée de brochage détaillée disponible pour MC3486DE4.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

MC3486DE4 convient pour 6 applications: Industrial RS-422 Data Acquisition, Instrumentation and Test Equipment Interfaces, Computer-to-Peripheral Balanced Links, Multi-Drop Multiplexed Data Buses, Telecommunications and Remote Terminal Equipment, Process Control and PLC Remote I/O.

🏭

Industrial RS-422 Data Acquisition

The MC3486DE4 recovers four balanced differential signals simultaneously, which makes it a natural fit for multi-channel instrumentation that talks to remote sensors over RS-422 cabling. Each of the four channels has its own differential input pair and 3-state output, so a single 16-pin SOIC can serve an entire four-axis data-acquisition front end instead of four single-channel receivers. Because the device is specified to ANSI TIA/EIA-422-B, the recovered levels and common-mode tolerance match a transmitter built to the same standard. With fast transition times the received word rate stays high, while the TTL-compatible outputs drive the ADC front-end or microcontroller inputs directly without level translation.

📺

Instrumentation and Test Equipment Interfaces

In lab and production test systems, the MC3486DE4 provides the receive side of a multi-drop instrument bus where one controller polls several instruments on shared cabling. The 3-state outputs are the decisive feature: only the selected receiver is enabled at a time, so several devices can share the same data lines without contention. Four channels per package means a 16-bit instrument bus needs only two receiver chips plus enable decoding logic. Because the device meets TIA/EIA-422-B and TIA/EIA-423-B, it can be deployed in systems whose specification references either RS-422 or RS-423 cabling rules, keeping termination and biasing unchanged between them.

🖥️

Computer-to-Peripheral Balanced Links

The MC3486DE4 is used on the receive side of balanced interconnects between a host controller and remote peripherals over longer cable runs than single-ended logic allows. Differential reception rejects common-mode noise picked up along the way, so data stays clean in industrial and laboratory environments where ground offsets exist between devices. Four independent receivers in one 16-SOIC package conserve board area compared with discrete single-channel parts, and the TTL-compatible outputs mean the recovered signals can enter a microcontroller or host bus interface directly. Where a complete link is needed, pairing with a quad differential driver such as the MC3487 family keeps the driver and receiver electrically consistent from both ends of the cable.

🔧

Multi-Drop Multiplexed Data Buses

The per-channel high-impedance outputs of the MC3486DE4 enable classic multiplexing schemes in which several remote nodes drive one shared data bus under arbiter control. Each receiver channel can be disabled while the bus is owned by another node, so the shared conductors see only one driver at a time and contention stays predictable. This pattern appears in legacy parallel-bus and remote I/O architectures, in older CNC and telemetry equipment, and in retrofit designs that add a modern microcontroller to an existing TIA/EIA-422-B cabling infrastructure. The commercial 16-SOIC package also means the part can be placed by standard pick-and-place lines during repairs and line upgrades without special assembly steps.

🌐

Telecommunications and Remote Terminal Equipment

The MC3486DE4 suits line-card and terminal equipment that terminates balanced subscriber or backhaul-style differential lines and converts them to logic levels for a processor. Four channels per package suits line cards that carry several signalling paths, and the 3-state outputs allow outputs to be parked safely during firmware reconfiguration or line re-seating. Because the receiver is referenced to TIA/EIA-423-B as well as TIA/EIA-422-B, systems that mix RS-423 host ports with RS-422 links can use one receiver type, which simplifies qualification and spare-parts stocking. Commercial temperature grading keeps the part in instrument and indoor terminal environments rather than harsh outdoor enclosures.

⚡

Process Control and PLC Remote I/O

In a process-control installation, sensor and actuator nodes are often linked back to a controller over shielded twisted-pair runs that pass next to motors and switching gear. The MC3486DE4 provides the receive path on the controller side of that link, converting the balanced differential waveform into clean logic for the PLC or remote I/O module. Because the device is a quad receiver, a single module can terminate four differential I/O points at once, keeping the terminal-block wiring uniform. The high-impedance outputs also let a controller monitor several buses in rotation, and the standard 16-SOIC footprint means the same board layout supports the commercial-temperature ordering code used in indoor control cabinets.

What is the MC3486DE4?
The MC3486DE4 is a Texas Instruments monolithic quadruple differential line receiver with 3-state, TTL-compatible outputs. It provides four independent differential-input channels in a single 16-pin SOIC package and is designed to meet ANSI TIA/EIA-422-B, ANSI TIA/EIA-423-B, ITU V.10 and ITU V.11 specifications. According to the Texas Instruments MC3486 data sheet, the four outputs can each be placed in a high-impedance state, which allows the channels to be multiplexed onto a shared data bus.
What standards does the MC3486DE4 meet?
The MC3486DE4 is specified against balanced digital point-to-point interfaces: ANSI TIA/EIA-422-B, ANSI TIA/EIA-423-B, and ITU Recommendations V.10 and V.11. These are the defining standards for RS-422 and RS-423 differential signalling, covering input thresholds, common-mode limits, and output drive behaviour. The Texas Instruments MC3486 data sheet states that the device meets or exceeds the requirements of each of these documents, so it can be used where a system specification cites TIA/EIA-422-B or TIA/EIA-423-B compliance.
What package does the MC3486DE4 come in?
The MC3486DE4 is supplied in a 16-pin SOIC package with a 0.154 inch (3.90 mm) body width, gull-wing terminals, package code SOP and a rectangular package shape. Distributor listings describe it as "0/4 Receiver RS422, RS423 16-SOIC", and it is a surface-mount part intended for automatic placement and reflow assembly. The same die is also offered in other 16-SOIC order codes, so the land pattern is identical across those variants.
What is the difference between MC3486DE4 and MC3487DE4?
The MC3486DE4 is a receiver and the MC3487DE4 is a transmitter. The MC3486DE4 contains four differential-input receivers with 3-state outputs that recover logic levels from a balanced line, while the MC3487DE4 contains four differential line drivers with TTL-compatible inputs and 3-state outputs that drive a balanced line. The two devices are typically used together at opposite ends of an RS-422 or RS-423 link, and they are not interchangeable because the signal direction and internal circuitry differ.
MC3486DE4 vs MC3486NSR - which one should I choose?
Both are 16-pin SOIC order codes of the same MC3486 receiver, so they are pin-to-pin compatible and electrically identical in function. Choose the MC3486DE4 for tube or bulk shipments and standard commercial ordering, and choose the MC3486NSR when you need a tape-and-reel presentation for automated pick-and-place or small-volume reel logistics. Because the package footprint is identical, a PCB designed for one will accept the other without any layout change.
What is the best drop-in replacement for MC3486DE4?
The closest drop-in replacement is another 16-SOIC order code of the MC3486 itself, such as MC3486D, MC3486DR or MC3486NSR, all of which use the same SOP-16 footprint and the same quadruple differential receiver with 3-state outputs. The one functional change worth checking is temperature grade, since ordering codes differ in commercial and extended-temperature versions. Use the pin-description table in the manufacturer data sheet to confirm enable and supply pin assignments before swapping parts on an existing board.
Can MC3487DE4 replace MC3486DE4?
No, the MC3487DE4 cannot replace the MC3486DE4. The MC3487 is a quadruple differential line driver whose outputs drive current onto a balanced cable, while the MC3486 is a receiver whose inputs sense that cable. Although both are 16-pin SOIC devices and share a family resemblance, the pin functions and signal direction are fundamentally different, so a substitution would require a board-level redesign rather than a component swap.
When should I choose MC3486DE4 over MC3486DR?
Choose the MC3486DE4 when your production flow suits tube or bulk presentation and you need a commercially graded 16-SOIC receiver; choose MC3486DR when the same device must be supplied in a reeled format for high-volume automated assembly. Because the MC3486DE4 and MC3486DR share the SOP-16 footprint and identical receiver circuitry, the decision is normally a supply-chain and packaging decision rather than an electrical one. Verify the temperature grade of whichever code you standardize on before releasing to production.
Where can I download the MC3486DE4 datasheet PDF?
The authoritative document is the Texas Instruments MC3486 data sheet, available from the manufacturer product page for MC3486 and through the linked guide part number entry for MC3486. The document covers the description, pin configuration, electrical characteristics, and typical application information for the quadruple differential line receiver with 3-state outputs. Download the PDF directly from Texas Instruments so that the values, limit tables and recommended operating conditions match the revision used for your production release.
Where can I find the MC3486DE4 pinout?
Use the pin configuration table in the Texas Instruments MC3486 data sheet, which lists all 16 pins of the SOP-16 package including the differential inputs, the outputs, the enable controls and the supply connections. Because this device is a mature part with multiple equivalent order codes, the same pin table applies to the MC3486D, MC3486DR and MC3486NSR variants, which lets you confirm compatibility before rework. Always verify the enable polarity and supply pin numbers against the data sheet rather than a distributor pinout sketch.
Where can I buy MC3486DE4 online?
Use the Request a Quote form on this page to request MC3486DE4 pricing, stock position and a delivery schedule from XAIPART. The part is a 16-SOIC commercial-grade Texas Instruments receiver that is stocked broadly in the market, and quoting directly through this page lets us confirm the exact order code, packing option and quantity breaks you need. No price or stock figure is stated on this page because both change daily.
What is the price of MC3486DE4?
MC3486DE4 pricing depends on order quantity and packing format, so the current figure is generated on this page rather than stored as static text. Submit the Request a Quote form with your target quantities and specify whether you need tube, bulk or reel presentation, and the unit and volume tiers will be returned. The part is a mature, widely distributed 16-SOIC line receiver, so volume pricing normally improves steadily as quantities rise.
What is the lead time for MC3486DE4?
Lead time for MC3486DE4 depends on manufacturer build position and the quantity you need, so it must be confirmed at order time. Request the current lead time through the Request a Quote form on this page and state your required quantity, packing format and target date. The MC3486 family is a long-standing production line, which generally means lead times track standard distributor inventory rather than special allocation, but only a live quote confirms the actual schedule.
Is MC3486DE4 in stock?
Stock levels for MC3486DE4 move continuously and are not published as a fixed value on this page. Request the current availability through the Request a Quote form on this page, giving the quantity and packing option you need. Because the MC3486 is produced in multiple 16-SOIC order codes (including MC3486D, MC3486DR and MC3486NSR), a quote can usually be satisfied from equivalent stock even when one specific code is temporarily short.
Is MC3486DE4 suitable for RS-423 applications?
Yes, the MC3486DE4 is explicitly designed for RS-423 as well as RS-422 operation. The Texas Instruments MC3486 data sheet states that the device meets or exceeds ANSI TIA/EIA-423-B and ITU Recommendation V.11, the documents that define RS-423, in addition to TIA/EIA-422-B and ITU V.10. The 3-state outputs also suit RS-423 systems where several receivers may share the same bus, since each output can be disabled when it is not selected.
What can replace MC3486DE4?
Replacements for MC3486DE4 are the other 16-SOIC order codes of the same Texas Instruments receiver, namely MC3486D, MC3486DR and MC3486NSR, which drop into the same SOP-16 footprint without any PCB change. A driver such as the MC3487 family is not a substitute because it transmits rather than receives. Before swapping parts, confirm on the MC3486 data sheet that the enable pin polarity and the supply connections match your board, and check that the replacement temperature grade covers your ambient range.
What are the key specifications of MC3486DE4 that engineers should know?
The MC3486DE4 is a monolithic quadruple differential line receiver with 3-state TTL-compatible outputs, specified to ANSI TIA/EIA-422-B, ANSI TIA/EIA-423-B, ITU V.10 and ITU V.11, and offered in a 16-pin SOIC (0.154 inch, 3.90 mm width) surface-mount package with a commercial temperature grade. Four independent differential-input channels, fast transition times and per-output high-impedance control are the headline features. The 3-state capability allows the four receivers to share one data bus for multiplexing or arbitration, which is the main reason to choose this quad receiver over a single-channel or non-3-state alternative.
Does the MC3486DE4 need a termination resistor on the cable?
The MC3486DE4 itself does not require an on-board termination network at its own pins; the receiver simply detects the differential voltage across the balanced pair. In a typical RS-422 or RS-423 link the termination is placed at the far end of the cable to hold the idle state at the correct differential level and to absorb reflections on longer runs. Follow the system wiring diagram in the manufacturer data sheet and the applicable TIA/EIA-422-B or TIA/EIA-423-B configuration guidance when placing terminations and any biasing network.

Données de référence d'ingénierie pour MC3486DE4 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the MC3486DE4 when you need four balanced differential receive channels with TTL-compatible 3-state outputs in a standard 16-pin SOIC, and the system specification references TIA/EIA-422-B or TIA/EIA-423-B. Choose the other MC3486 order codes (MC3486D, MC3486DR, MC3486NSR) when supply packaging, reel presentation or a different temperature grade drives the decision rather than the electrical performance; all share the same land pattern. Choose a quad receiver with non-3-state outputs only if you never need to share a bus. Do not consider the MC3487 family or other driver parts as substitutes, because they transmit rather than receive, and their pin functions are different. For designs where cable length, common-mode range and supply rails must be validated against exact numbers, pull the electrical characteristic tables from the manufacturer data sheet for the specific ordering code you plan to release, and confirm the temperature grade covers your worst-case ambient.

Comparaison avec les alternatives

Paramètre Ce produit MC3486D MC3486DR MC3486NSR
Package 16-SOIC (SOP-16), 0.154 inch (3.90 mm) width 16-SOIC (SOP-16) - same footprint 16-SOIC (SOP-16) - same footprint 16-SOIC (SOP-16) - same footprint
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Function Quadruple differential line receiver with 3-state outputs Quadruple differential line receiver with 3-state outputs Quadruple differential line receiver with 3-state outputs Quadruple differential line receiver with 3-state outputs
Number of Channels 4 4 4 4
Supported Standards ANSI TIA/EIA-422-B, ANSI TIA/EIA-423-B, ITU V.10, ITU V.11 ANSI TIA/EIA-422-B, ANSI TIA/EIA-423-B, ITU V.10, ITU V.11 ANSI TIA/EIA-422-B, ANSI TIA/EIA-423-B, ITU V.10, ITU V.11 ANSI TIA/EIA-422-B, ANSI TIA/EIA-423-B, ITU V.10, ITU V.11
Output Type 3-state, TTL-compatible 3-state, TTL-compatible 3-state, TTL-compatible 3-state, TTL-compatible
Transition Time Fast transition times per manufacturer data sheet Fast transition times per manufacturer data sheet Fast transition times per manufacturer data sheet Fast transition times per manufacturer data sheet
Mounting Type Surface mount, gull-wing terminals Surface mount, gull-wing terminals Surface mount, gull-wing terminals Surface mount, gull-wing terminals

Principaux différenciateurs

  • Four independent differential receivers in one 16-pin SOIC (vs MC1489NE4)
  • Per-channel high-impedance outputs enable shared-bus multiplexing (vs MC3486DR)
  • Specified to both TIA/EIA-422-B and TIA/EIA-423-B (vs MC3487DE4)

Notes de conception

The 3-state outputs are the part's most useful feature and its most common failure point. If a channel output is left enabled while another node drives the same bus node, the two drivers fight and the supply current spikes, which can overheat the device or damage a remote driver. Always drive the enable control from a defined state at power-up, and include a pull-down or pull-up so the output is parked during reset and brown-out. Confirm the enable polarity and pin numbers against the pin-configuration table in the manufacturer data sheet, since the enable arrangement differs between receiver and driver families.

Place the SOIC-16 receiver close to the connector or transceiver boundary so the unbalanced stub between the cable and the differential inputs stays short. Keep the differential pair routed as a coupled pair with a continuous ground plane beneath it; unmatched pair lengths degrade the common-mode rejection that makes RS-422 robust. Provide an unobstructed ground return path for the cable shield and connect the shield to the chassis or single reference point near the entry, otherwise common-mode energy can be injected into the input stage.

The receiver's supply rails must be referenced to the same ground as the remote transmitter for the differential threshold to remain meaningful. Decouple each supply pin locally with a high-frequency ceramic capacitor plus a bulk electrolytic placed within a few millimetres of the pins, and route the supply to the device as a separate trace from the noisy differential inputs. Because four channels share the same supply pins, a transient on one channel can momentarily disturb the reference of the other three, so clean local decoupling directly improves margin on all four channels.

Termination and biasing belong to the system design, not to the receiver IC. For RS-422 links, place the termination at the far end of the cable so that reflections are absorbed at the end opposite the source; for RS-423, follow the TIA/EIA-423-B configuration that includes the biasing network so the idle differential voltage is defined. Do not terminate at both ends of a long run unless the system specification calls for it, because double termination over-damps the signal and can degrade transition times at higher data rates.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

No RoHS, REACH, lead-free or conflict-minerals declaration was stated in the product listings reviewed. The part is a commercial-grade interface receiver rather than an automotive-qualified device, so AEC-Q100 does not apply.

Données vérifiées le : 2026-11-11 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

MC3486DE4 datasheet MC3486DE4 datasheet pdf MC3486DE4 pinout MC3486DE4 equivalent MC3486DE4 drop-in replacement MC3486DE4 vs MC3486NSR MC3486DE4 price MC3486DE4 stock MC3486DE4 lead time Texas Instruments MC3486DE4 MC3486 datasheet MC3486 16-SOIC line receiver MC3486DE4 RS-422 RS-423 receiver application

Composants & termes associés

Texas Instruments MC3486DE4 MC3486D MC3486DR MC3486NSR MC3487DE4 MC1489NE4 MC1488NE4 differential line receiver line receiver interface transceiver IC integrated circuit RS-422 RS-423 ANSI TIA/EIA-422-B ANSI TIA/EIA-423-B ITU Recommendation V.10 ITU Recommendation V.11 3-state output TTL-compatible output SOIC-16 SOP-16 QFN family surface mount SMD common-mode rejection multi-drop bus differential signalling commercial temperature grade
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ