MC9S08DN32MLH - 8-Bit 40MHz 32KB Flash MCU | NXP
Référence : MC9S08DN32MLH ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $7.8137 | $7,81 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
MC9S08DN32MLH Présentation
What is an 8-bit microcontroller? An 8-bit microcontroller is a compact embedded-processing semiconductor that executes instructions over an 8-bit data bus and integrates memory and peripherals into one device. The MC9S08DN32MLH belongs to the S08 microcontroller family, placing it within the embedded-controller hierarchy: MCU, 8-bit microcontroller, S08 MCU, and integrated embedded semiconductor. It is intended for applications that require deterministic control, compact firmware storage, and modest processing throughput.
The principal verified features are a 40 MHz maximum clock, 32 KB of Flash organized as 32K x 8, 2 KB of RAM, 3.3 V or 5 V operation, and a 64-pin LQFP package. Distributor records also identify the part as an S08 device with no CAN interface. The Flash memory provides a larger program-storage budget than many small 8-bit controllers, while the 2 KB RAM supports working variables, stack activity, buffers, and peripheral state. Its automotive temperature-grade marking makes it relevant to vehicle-oriented control systems where operating-temperature qualification and legacy software support matter.
The S08 architecture uses a CISC instruction set and an integrated embedded design that can reduce the need for external support components. The 40 MHz clock provides additional processing headroom for control loops, state machines, communication protocols, and supervisory functions. However, the verified data does not specify individual peripheral channels, timer counts, communication modules, pin functions, memory endurance, or electrical limits, so those details must be confirmed in the manufacturer datasheet before a new board is released.
Typical use cases include automotive body and body-adjacent controllers, motor and actuator supervisory systems, sensor-conditioning nodes, instrument-cluster electronics, industrial automation equipment, and legacy 8-bit control products. The 64-pin LQFP footprint is useful when peripheral routing and external connectivity are more important than minimizing board area. For battery-powered systems, supply-current and sleep-mode data must be checked because those values were not supplied in the verified results.
The most important design consideration is validating the complete pinout, electrical limits, clock requirements, reset requirements, and programming interface against the official datasheet before PCB layout or firmware deployment begins. Do not infer pin functions from the package pin count, and verify that the selected temperature grade, flash programming method, and application code match the production requirements.
This page consolidates verified distributor specifications, package information, pricing context, cross-reference evidence, and practical selection guidance. It distinguishes confirmed MC9S08DN32MLH facts from parameters still requiring manufacturer-documentation review, helping engineers evaluate legacy 8-bit designs without substituting unverified engineering assumptions.
Alternatives de remplacement direct pour MC9S08DN32MLH — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MC9S08DN32MLH (même facteur de forme et même empreinte) — différant par Package, Product Type, RAM, Program Memory, Core Processor.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MC9S08DN32AMLH
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MC9S08DN32ACLH
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →MC9S08DN32MLF
✅ Remplacement direct✓ En stock
$7.2282 / unité
Voir la fiche technique →MC9S08DV60MLH
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →MC9S08AC32CFJE
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →MC9S08DN32MLH Valeurs maximales et caractéristiques électriques
| Product Type | 8-bit microcontroller |
| Series | S08 |
| Architecture | CISC |
| Fréquence d'horloge maximale | 40 MHz |
| Flash Memory | 32 KB (32K x 8) |
| RAM | 2 KB |
| Tension d'alimentation | 3.3 V / 5 V |
| Boîtier | 64-LQFP (10 mm x 10 mm) |
| Nombre de broches | 64 |
| Terminal Form | Gull wing |
| Package Code | LFQFP |
| Temperature Grade | Automotive |
| CAN Interface | No CAN |
| Type de montage | Surface mount |
| Manufacturer | NXP Semiconductors |
| Datasheet Package Description | 32KB 32K x 8 Flash, 8-bit S08 series |
Guide de configuration des broches du MC9S08DN32MLH 32kb 32k x 8 flash, 8-bit s08 series
Configuration des broches du MC9S08DN32MLH (boîtier 32kb 32k x 8 flash, 8-bit s08 series). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour MC9S08DN32MLH.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MC9S08DN32MLH convient pour 6 applications: Automotive Body Control, Motor and Actuator Supervision, Industrial Sensor Conditioning, Instrumentation and Measurement, Communication Hub, Legacy Product Maintenance.
Automotive Body Control
The MC9S08DN32MLH fits automotive body and body-adjacent control functions where an 8-bit MCU, automotive temperature-grade labeling, 32 KB Flash, and 2 KB RAM are useful. It can supervise switches, inputs, actuators, and simple diagnostic logic without requiring a larger processor when the control task is deterministic. The 40 MHz S08 core provides processing margin for state machines and service routines, while the 64-LQFP package provides ample routing flexibility. Confirm exact automotive qualification, electrical limits, transceiver interfaces, and diagnostics in NXP documentation before production use.
Recommandé
Motor and Actuator Supervision
The MC9S08DN32MLH can serve as the supervisory controller for motors, relays, valves, and actuators that require fast control logic but not a high-bandwidth operating system. Its verified 40 MHz maximum clock and 32 KB Flash provide room for timing tables, protection routines, and diagnostic state machines, while 2 KB RAM supports local variables and buffers. Use suitable external drivers, protection components, and isolation as required; the MCU supply parameters and individual timer outputs are not included in the supplied data and must be verified before schematic capture.
Recommandé
Industrial Sensor Conditioning
The MC9S08DN32MLH is suitable for compact sensor-conditioning and signal-acquisition front ends when the system needs local filtering, calibration, threshold logic, and communication management. The 32 KB Flash can hold calibration tables and firmware, and the 2 KB RAM can hold sampled values and working state. Its 64-LQFP package helps expose I/O and power connections on a serviceable control board. The verified data does not identify ADC resolution, sensor interfaces, input filters, or communication peripherals, so those functions must be confirmed in the manufacturer datasheet rather than inferred from the S08 family name.
Recommandé
Instrumentation and Measurement
The MC9S08DN32MLH can be used in measurement instruments that require deterministic sampling, control, calibration, and local user-interface logic. Its verified 40 MHz class of S08 performance is useful for combining sensor reads with filtering and control routines, while 32 KB Flash offers a practical code and constant-storage budget. The 3.3 V or 5 V operating indication helps select system-level power architecture, although regulator headroom, ADC specifications, and timing accuracy are not supplied. Prototype first against the official electrical and timing documentation before connecting precision analog front ends.
Recommandé
Communication Hub
The MC9S08DN32MLH can serve as a small protocol hub or gateway when the system combines serial communications, local I/O, diagnostics, and control in one embedded node. The verified 2 KB RAM and 32 KB Flash are appropriate for modest protocol stacks, message buffers, and configuration data, while the 8-bit S08 architecture keeps firmware design straightforward. The verified records state that the part has no CAN, so use an external CAN transceiver or select a CAN-equipped MCU when that bus is mandatory. Exact serial peripheral counts and electrical interfaces remain undocumented in the supplied snippets.
Recommandé
Legacy Product Maintenance
The MC9S08DN32MLH is relevant to maintenance, redesign-support, and spare-part programs for products already built around the S08 ecosystem. Its verified 32 KB Flash and 2 KB RAM help preserve existing software capacity, while the 64-LQFP footprint supports controlled board-level reuse when the exact pinout is confirmed. A maintenance program should compare revision history, errata, temperature grade, package markings, and supply-chain authenticity rather than relying only on the MPN. Because lifecycle status is not confirmed by the supplied data, production planning requires direct distributor and manufacturer confirmation.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MC9S08DN32MLH — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MC9S08DN32AMLH | MC9S08DN32ACLH | MC9S08DN32MLF | MC9S08DV60MLH | MC9S08AC32CFJE |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Architecture | 8-bit S08 CISC | 8-bit S08 family candidate | 8-bit S08 family candidate | 8-bit S08 family candidate | 8-bit S08 family candidate | 8-bit S08 family candidate |
Principaux différenciateurs
- Verified S08 identity with 32 KB Flash and 2 KB RAM (vs MC9S08DN32ACLH)
- Automotive temperature-grade listing (vs MC9S08DN32AMLH)
- Known 64-LQFP 10 mm x 10 mm package format (vs MC9S08DN32MLF)
- 40 MHz maximum clock specification (vs MC9S08AC32CFJE)
Notes de conception
Do not treat a matching 64-LQFP outline as proof of drop-in compatibility. The supplied cross-reference results identify MC9S08DN32AMLH and MC9S08DN32ACLH as candidates, but they do not provide complete pin-function or electrical comparisons. Verify every pin, alternate-function mapping, supply limit, reset behavior, clock requirement, memory map, and peripheral difference against the official datasheets before changing a released PCB.
Plan the power tree around the verified 3.3 V or 5 V operating indication, but do not assume either label defines the complete electrical envelope. Confirm minimum and maximum supply voltage, I/O thresholds, absolute maximum ratings, startup behavior, and power-consumption modes in the manufacturer datasheet. Include local decoupling and ensure any external transceiver or sensor has compatible logic levels. These are design checks rather than verified MC9S08DN32MLH specifications.
Use a verified CAD symbol and manufacturer land pattern before routing the 64-LQFP footprint. Preserve access to programming, reset, clock, ground, and supply pins, and keep sensitive signal routing away from noisy switching nodes where possible. Because the complete pinout is absent from the supplied data, do not assign MCU functions to numbered pins or calculate decoupling values without checking the official package drawing and electrical recommendations.
The available records identify an automotive temperature grade but do not provide the junction-temperature limit, package thermal resistance, or power dissipation data. Those values must be obtained from the official datasheet and measured in the final PCB environment. For a legacy embedded design, check airflow, copper area, nearby heat sources, and ambient conditions rather than assuming the temperature-grade label alone guarantees adequate thermal performance.
Resolve the apparent memory discrepancy between the FindIC snippet, which says 33 KB, and the DigiKey/Mouser records, which say 32 KB, before programming or compiling the design. Use the exact NXP device documentation and programming-device support list as the authority. Also confirm the manufacturer identity transition between Freescale and NXP when purchasing documentation or production parts.
Informations de conformité
The verified distributor records identify an automotive temperature grade but do not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. Compliance must be confirmed from the current manufacturer declaration or product documentation.