MC9S08DV60MLC - 40MHz 8-Bit 60KB MCU | NXP | 32-LQFP
Référence : MC9S08DV60MLC ✓ ActifMC9S08DV60MLC Présentation
An 8-bit microcontroller is a compact embedded-processing device that combines a CPU, program memory, data memory, peripheral interfaces, and general-purpose I/O in one integrated circuit. Within the embedded-control hierarchy, the MC9S08DV60MLC belongs to the HCS08 and S08 families of 8-bit microcontrollers. It is intended for cost-sensitive control systems where deterministic peripheral operation and moderate code and data capacity are more important than high arithmetic throughput.
Principal features include 60 KB (60K x 8) of Flash program memory, 3K x 8 RAM, a 40 MHz maximum CPU frequency, and a 20 MHz bus frequency. The integrated 12-bit ADC provides 16 channels with a stated 2.5-second conversion time. The device also offers up to 25 I/O pins, external-oscillator operation, and support for as many as 32 interrupt and reset sources, making it suitable for compact embedded controllers with several sensing and control channels.
The HCS08 architecture is based on a CISC-style instruction set and is optimized for embedded control rather than high-throughput digital signal processing. Flash memory supports repeated firmware updates during development and production, while the 3 KB RAM provides working space for variables, stack operations, and control-state management. Because the external clock and power rails are separate from the internal logic, PCB implementation must provide stable reference-clock routing and adequate local supply bypassing.
Typical uses include industrial equipment, automotive and transportation modules, appliance controls, building equipment, sensor interfaces, and compact embedded systems. The 12-bit ADC supports analog monitoring, while the GPIO count accommodates digital inputs, outputs, and peripheral functions. In a production design, firmware development should also account for reset behavior, interrupt latency, clock tolerances, and the boundary conditions associated with the 3.3 V to 5 V operating range.
Place the decoupling capacitor close to the supply pins, route the oscillator circuit away from high-current switching nodes, and assign unused pins according to the manufacturer pin-description table. Validate timing at the 40 MHz CPU rate and the intended external clock configuration. For legacy product maintenance, this page provides specification context, package guidance, and drop-in alternatives for engineering review.
Alternatives de remplacement direct pour MC9S08DV60MLC — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MC9S08DV60MLC (même facteur de forme et même empreinte) — différant par ADC Conversion Time, ADC Resolution, Instruction Set, Maximum CPU Frequency, Package.
MC9S08DV60AMLH
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →MC9S08QE32CLCR
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →MC9S08DZ48ACLC
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MC9S08DV60MLC Valeurs maximales et caractéristiques électriques
| Product Type | 8-bit HCS08 microcontroller |
| Series | S08 |
| Maximum CPU Frequency | 40 MHz |
| Bus Frequency | 20 MHz |
| Instruction Set | HC08 instruction set with BGND instruction |
| Program Memory Type | Flash |
| Program Memory Size | 60 KB (60K x 8) |
| RAM Size | 3K x 8 |
| Number of I/O Pins | 25 |
| ADC Resolution | 12 bit |
| ADC Channels | 16 |
| ADC Conversion Time | 2.5 s |
| Supply Voltage Range | 3.3 V to 5 V |
| Oscillator Type | External |
| Interrupt and Reset Sources | Up to 32 |
| Boîtier | 32-LQFP (7x7 mm) |
| Type de montage | Surface Mount |
| Packaging | Tray |
| Temperature Grade | Automotive |
Guide de configuration des broches du MC9S08DV60MLC 32-lqfp (7x7 mm)
Configuration des broches du MC9S08DV60MLC (boîtier 32-lqfp (7x7 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour MC9S08DV60MLC.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MC9S08DV60MLC convient pour 6 applications: Automotive Body Control Module, Industrial Sensor Controller, Appliance Control Board, Building Equipment Interface, Transport Equipment Module, Standalone Data Acquisition Module.
Automotive Body Control Module
The MC9S08DV60MLC fits compact body-control modules that must combine switch inputs, actuator outputs, analog sensing, and event handling. Its 40 MHz HCS08 CPU provides processing headroom, while 60 KB of Flash accommodates application code and calibration data. The 16-channel, 12-bit ADC supports inputs such as temperature, position, and pressure sensing, while 25 I/O pins provide interfaces for switches, lamps, relays, and communication peripherals. Its 32-LQFP package also keeps the footprint compact. During layout, isolate switching nodes from the external clock and analog inputs, and validate reset, supply-transient, and automotive qualification requirements for the specific vehicle program.
Recommandé
Industrial Sensor Controller
The MC9S08DV60MLC is suitable for industrial sensor nodes that gather multiple analog measurements and drive digital outputs through a common embedded-control platform. The 12-bit ADC provides 16 channels, and the 3 KB of RAM supports acquisition buffers, state machines, and communication routines. Its 40 MHz CPU supports responsive control logic, and the 60 KB of Flash is sufficient for calibration tables, diagnostics, and firmware. Use the external oscillator only when its frequency and accuracy match the firmware timing assumptions. Industrial designs should add appropriate input protection, calibration, watchdog strategy, and supply filtering because those system requirements extend beyond the device's basic electrical ratings.
Recommandé
Appliance Control Board
The MC9S08DV60MLC can serve as the central controller in an appliance or HVAC control board combining user inputs, display control, temperature measurement, motor outputs, and fault detection. Its 25 I/O pins provide practical control connectivity, while the 16-channel ADC supports mixed analog monitoring. With 3 KB of RAM and 60 KB of Flash, the device can manage state machines, timers, and moderate protocol stacks without a separate logic device. Place input and output grounds according to the recommended partitioning strategy, keep relay or motor drive currents away from sensitive analog traces, and validate standby behavior and brownout recovery. Firmware should account for all peripheral shutdown states and use safe outputs during initialization.
Recommandé
Building Equipment Interface
The MC9S08DV60MLC is appropriate for building-equipment interface modules that monitor environmental inputs and report status through low-speed communications. Its 16-channel 12-bit ADC can support temperature, humidity, occupancy, and analog equipment feedback, while 25 I/O lines handle discrete alarms, enable signals, and relay-control outputs. The 40 MHz CPU allows protocol handling and diagnostics alongside real-time control, and 60 KB of Flash leaves room for configuration data. For robust deployment, include galvanic isolation where required, ESD protection on external lines, and a defined recovery path for power loss. The external clock circuit should be isolated from switching nodes and configured according to the manufacturer's oscillator requirements.
Recommandé
Transport Equipment Module
The MC9S08DV60MLC can support compact transportation equipment modules that combine discrete controls, analog condition monitoring, and diagnostic logic. Its 40 MHz HCS08 CPU handles time-sensitive input processing, while the 60 KB of Flash accommodates protocol handlers and fault logs. The 12-bit, 16-channel ADC permits monitoring of pressure, level, or temperature, and the 25 available I/O pins support switches, indicators, and communication devices. The 32-LQFP package simplifies assembly in space-constrained electronics. In implementation, protect external connectors from transients, follow the pin-description table for alternate functions, and verify clock tolerance across the full environmental range. Qualification criteria should match the vehicle or rail application's requirements.
Recommandé
Standalone Data Acquisition Module
The MC9S08DV60MLC supports a standalone acquisition module that sequences analog measurements, performs scaling, and exports results through a digital interface. The 16-channel, 12-bit ADC provides the sensing front end, while 60 KB of Flash can store calibration coefficients and configuration code. Its 40 MHz CPU leaves margin for filtering and communication, and 3 KB of RAM can hold sample buffers or protocol state. Use a controlled reference clock and verify the stated 2.5-second ADC conversion figure against the required acquisition mode. Analog inputs should use suitable filtering and source-impedance arrangements, while the external clock and serial interfaces should be physically separated from switching regulators to reduce coupling.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MC9S08DV60MLC — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MC9S08DV60AMLH | MC9S08QE32CLCR | MC9S08DZ48ACLC |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 32-LQFP (7x7 mm) | 32-LQFP | 32-LQFP | 32-LQFP |
| Product Type | 8-bit S08 microcontroller | 8-bit S08 microcontroller | 8-bit S08 microcontroller | 8-bit S08 microcontroller |
| Program Memory | 60 KB Flash | 60 KB Flash | 32 KB Flash | 48 KB Flash |
Principaux différenciateurs
- Larger Flash allocation than the reduced-memory alternatives (vs MC9S08QE32CLCR)
- More Flash than the 48 KB DZ-family alternative (vs MC9S08DZ48ACLC)
- Higher documented CPU frequency than the reduced-memory comparison part (vs MC9S08QE32CLCR)
Notes de conception
Follow the manufacturer layout guidance for the 32-LQFP footprint and route the external oscillator circuit close to the clock pins. Keep the oscillator loop compact, provide a continuous ground reference beneath the relevant area, and separate clock traces from switching-regulator and high-current output paths. Verify the final land pattern against the package drawing rather than relying solely on a generic QFP footprint, because exposed-pad and thermal requirements must match the selected PCB design.
Place the required supply-decoupling capacitor adjacent to the MCU power pins and use the capacitance and voltage rating specified by the manufacturer datasheet. The device operates across 3.3 V to 5 V, so the system rail, regulator tolerance, startup ramp, and brownout behavior must all remain compatible. Check every I/O pin's voltage-domain limits during mixed-signal or interface redesigns, especially when a replacement changes the suffix or qualification configuration.
Do not treat a matching LQFP outline as proof of drop-in compatibility. MC9S08DV60MLC has 60 KB of Flash, 3 KB of RAM, a 40 MHz CPU, a 16-channel 12-bit ADC, and up to 32 interrupt or reset sources. Before substituting another S08 device, compare pin functions, reset behavior, clocking, memory size, peripheral mappings, and software configuration. MC9S08QE32CLCR and MC9S08DZ48ACLC provide less Flash, so firmware-size overflow is a likely integration risk.
Separate analog input routing from digital switching activity and return analog grounds to a quiet reference point according to the recommended application circuit. The ADC has 16 channels and 12-bit resolution, but useful measurement accuracy still depends on source impedance, filtering, reference stability, and grounding. The manufacturer lists 2.5 seconds as the ADC conversion time; confirm the intended sampling configuration and acquisition timing during firmware and hardware validation.
Informations de conformité
The product is listed with an automotive temperature grade, but the available records do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.