MC9S08JS16CFK - 48MHz 16KB Flash USB 2.0 MCU | NXP
Référence : MC9S08JS16CFK ✓ ActifMC9S08JS16CFK Présentation
An S08 microcontroller is an 8-bit embedded processing platform designed for compact control systems that combine deterministic peripheral access, modest program memory, and low-cost connectivity. In the product hierarchy, the MC9S08JS16CFK is a microcontroller IC within the S08 family of 8-bit embedded processors. It is suited to USB peripherals, human-interface devices, data acquisition modules, and compact industrial or consumer-control products.
The principal features include a 48 MHz S08 core, 16 KB of Flash memory, 512 bytes of RAM, USB 2.0 connectivity, and a 24-QFN-EP package. The integrated USB transceiver supports a direct USB device implementation without a separate USB transceiver IC. Its small 5 mm by 5 mm package also permits denser PCB layouts than larger leaded or TSSOP microcontroller packages, although designers must account for the exposed thermal pad and difficult visual inspection of solder joints.
The MC9S08JS16CFK belongs to the MC9S08JS16 family, whose documentation covers the S08 architecture, USB operation, electrical limits, clocking, memory organization, and package characteristics. The 48 MHz operating rate provides additional processing headroom for protocol handling and control tasks, while the 16 KB Flash capacity supports a bootloader, device configuration, and application code. Exact operating voltage, peripheral inventories, and timing limits should be checked against the manufacturer datasheet before schematic capture.
Typical uses include USB-connected keyboards, mice, control panels, configuration tools, instrumentation interfaces, and embedded adapters. The USB device capability is particularly useful when a design must enumerate with a host computer while retaining the simplicity of an 8-bit control architecture. Firmware can use the integrated USB transceiver to implement device communication while dedicated timers, serial interfaces, and general-purpose I/O handle local control tasks.
The 24-QFN-EP package requires careful PCB design. Place the exposed pad on a solder mask-defined copper area connected to ground, use a land pattern compatible with the manufacturer's QFN recommendations, and verify the reflow profile. Keep sensitive analog or communications paths away from high-current switching nodes and route USB differential signals as a controlled-impedance pair on a quiet board region.
This product page combines the NXP device description, family datasheet, distributor identification, and cross-reference records into an engineering-focused view of the MC9S08JS16CFK. It also documents application fit, package considerations, sourcing workflow, and the limitations of substitute parts that differ in memory, peripherals, or pin configuration.
Alternatives de remplacement direct pour MC9S08JS16CFK — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MC9S08JS16CFK (même facteur de forme et même empreinte) — différant par Package, Product Type, Mounting Type, Flash Memory, Process Technology.
MC9S08SH8CTJR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MC9S08SH4CFK
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →MC9S08JS16CFK Valeurs maximales et caractéristiques électriques
| Product Type | 8-bit Flash microcontroller with USB 2.0 |
| Core Architecture | S08 8-bit core |
| Maximum Core Frequency | 48 MHz |
| Program Memory | 16 KB Flash (16K x 8) |
| RAM | 512 bytes |
| USB Version | USB 2.0 full-speed device |
| Integrated USB Transceiver | Yes |
| Boîtier | 24-pin HVQFN-EP (5 mm x 5 mm) |
| Nombre de broches | 24 pins |
| Type de montage | Surface mount |
| Serial Interface Features | SCI and SPI connectivity indicated in comparison data |
| LIN Bus Support | Yes, indicated in comparison data |
Guide de configuration des broches du MC9S08JS16CFK 24-pin hvqfn-ep (5 mm x 5 mm)
Configuration des broches du MC9S08JS16CFK (boîtier 24-pin hvqfn-ep (5 mm x 5 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour MC9S08JS16CFK.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MC9S08JS16CFK convient pour 6 applications: USB Human-Interface Device, USB Data-Acquisition Adapter, Industrial Configuration Interface, USB Embedded Adapter, Portable Test and Measurement Probe, USB Motor-Control Interface.
USB Human-Interface Device
The MC9S08JS16CFK is suitable for a compact USB keyboard, mouse, touch controller, or similar human-interface peripheral because it combines a 48 MHz S08 core with a full-speed USB 2.0 device controller and integrated transceiver. The 16 KB Flash store can hold enumeration logic, report descriptors, device firmware, and configuration data, while 512 bytes of RAM supports short protocol buffers and control state. Using the integrated transceiver can reduce board area compared with a discrete USB transceiver arrangement. The main design constraint is the 24-QFN-EP footprint, which requires a manufacturer-compatible land pattern, adequate ground-pad soldering, and careful routing of the USB differential pair away from noisy circuitry.
Recommandé
USB Data-Acquisition Adapter
The MC9S08JS16CFK can serve as the control and USB communications device in a compact data-acquisition adapter. Its 48 MHz processing rate supports protocol handling alongside timer and serial-interface tasks, while 16 KB of Flash accommodates firmware, calibration tables, and a USB descriptor. SCI and SPI connectivity identified for the S08 device enables connection to external sensors, converters, or transceivers. Because the MCU has only 512 bytes of RAM, buffering should be partitioned carefully and larger data blocks should be streamed or stored externally. USB trace geometry, grounding, and exposed-pad assembly require attention to preserve signal integrity and reliable production soldering.
Recommandé
Industrial Configuration Interface
The MC9S08JS16CFK fits an industrial configuration tool where a USB connection updates settings, reads diagnostics, or transfers operating data from a larger embedded controller. Its integrated USB transceiver avoids a separate transceiver in the interface section, and the 48 MHz core leaves room for command processing beyond basic enumeration. The device can use its SCI or SPI connectivity to exchange structured data with local circuitry, while 16 KB of Flash stores firmware and a boot/update path. Industrial qualification should be based on the exact temperature, voltage, ESD, and EMC requirements rather than the broad family description. Firmware should also include write protection, authentication, and recovery mechanisms appropriate to field-updatable equipment.
Recommandé
USB Embedded Adapter
The MC9S08JS16CFK is appropriate for a compact embedded adapter that converts between a host USB port and an internal serial or sensor network. Its full-speed USB 2.0 device interface provides a standard host connection, while the S08 peripherals support the required command handling and data movement. The 16 KB Flash limit favors concise firmware, so protocol tables should be optimized and large records transferred incrementally rather than buffered entirely in RAM. SCI and SPI links allow the same controller to connect to external modules without another dedicated interface IC. The 5 mm by 5 mm QFN-EP package supports compact dongle-style products, but assembly and rework processes must be qualified for its fine-pitch leads and exposed pad.
Recommandé
Portable Test and Measurement Probe
The MC9S08JS16CFK can control a compact USB-connected test probe or portable instrumentation module. At 48 MHz, the S08 core can service USB command handling alongside timers, serial links, and status reporting, while 16 KB of Flash provides room for measurement routines and calibration information. External analog front ends can connect through SPI or other documented peripherals, leaving the MCU responsible for acquisition control and host communication. The limited 512-byte RAM makes short register-level transactions and streaming preferable to large local capture buffers. A battery-powered implementation should evaluate sleep behavior and available clocking options from the manufacturer datasheet, while the exposed ground pad should be designed to support stable supply and low-noise analog performance.
Recommandé
USB Motor-Control Interface
The MC9S08JS16CFK can provide a host-commanded motor or actuator interface in a compact control module. The 48 MHz S08 core can process commands received over USB and coordinate timing functions, while the device's serial interfaces support connection to a motor driver, position sensor, or remote controller. A 16 KB Flash budget is adequate for a focused control application when the code is structured around the target protocol, and 512 bytes of RAM supports command state and short motion tables. USB provides commissioning, diagnostics, and parameter updates rather than continuous closed-loop motion traffic. Galvanic isolation, motor-side transients, and safety behavior must be implemented outside the MCU, and the QFN exposed pad should be tied to the recommended ground network to improve thermal and return-current performance.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MC9S08JS16CFK — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MC9S08SH8CTJR | MC9S08SH4CFK |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 24-QFN-EP (5x5 mm) | 24-QFN-EP (5x5 mm) | 24-QFN-EP (5x5 mm) |
| Core Architecture | S08, 8-bit | S08, 8-bit | S08, 8-bit |
| Flash Memory | 16 KB | 8 KB | 4 KB |
Principaux différenciateurs
- Twice the Flash capacity of the closest identified S08 QFN candidate (vs MC9S08SH8CTJR)
- Four times the Flash capacity of the smaller S08 QFN candidate (vs MC9S08SH4CFK)
- Verified integrated full-speed USB 2.0 device capability (vs MC9S08SH8CTJR)
- Matches the 48 MHz and 24-QFN comparison baseline (vs MC9S08SH8CTJR)
Notes de conception
Use the manufacturer-recommended 24-QFN-EP land pattern and preserve the exposed-pad connection to ground. The fine-pitch leads and underside ground pad are difficult to inspect visually, so production designs should include X-ray or equivalent process-control capability. Match pad dimensions, mask openings, and solderable area to the NXP package drawing rather than adapting a generic QFN footprint.
Route the USB differential pair as a controlled-impedance, tightly coupled pair on a continuous reference plane. Keep the pair away from switching nodes, high-current motor paths, crystal-clock circuitry, and the exposed-pad region. Provide a short return path beneath the pair, minimize branch stubs, and follow the NXP USB layout guidance in the family datasheet when selecting width and spacing.
Plan the supply network around the 48 MHz operating condition and the USB transceiver load. Place required bypass capacitors close to their corresponding power pins and connect them to an uninterrupted ground plane. Review the exact operating-voltage range, total current, USB startup behavior, and decoupling requirements in the MC9S08JS16 datasheet because those values are not stated in the product-page summary.
Do not treat a matching QFN outline as proof that a substitute is pin-to-pin compatible. The MC9S08SH8CTJR has only 8 KB of Flash versus 16 KB in the target, while the MC9S08SH4CFK has 4 KB. Confirm pin names, alternate-function mapping, USB circuitry, clocks, memory map, and application firmware before using either candidate in an existing design.
Use the exposed pad as both an electrical ground connection and a thermal path into the PCB copper system. Avoid cutting thermal copper beneath the device unless the manufacturer package drawing explicitly permits it. Validate junction temperature and enclosure temperature for the final 48 MHz operating environment, and increase top-side copper or board area when the design dissipates significant internal power.
Informations de conformité
The available product records identify the manufacturer, device function, package, and active status but do not provide extractable compliance declarations for this ordering code.