MC9S08PL60CLD - 8-Bit 20MHz 60KB Flash MCU | NXP
Référence : MC9S08PL60CLD ✓ ActifMC9S08PL60CLD Présentation
An 8-bit microcontroller is a semiconductor device whose CPU and peripherals are optimized for embedded control, measurement, and simple digital logic. Within the broader hierarchy, the MC9S08PL60CLD is an MCU, a microcontroller, and a member of the HCS08 family of 8-bit embedded processors. Its compact instruction-oriented architecture, dedicated peripherals, and mixed-signal resources make it suitable for appliance control, industrial interfaces, sensing modules, and low-cost automation products.
The principal characteristics include 60 KB of Flash memory organized as 60K by 8 bits, a maximum clock frequency of 20 MHz, and operation from a 5 V supply as described for the S08P family. Integrated EEPROM preserves calibration or configuration data without consuming Flash program space. The 10-bit ADC and analog comparator support sensor interfaces, while flexible timers help implement periodic sampling, motor or valve control, and industrial timing functions.
NXP describes the S08P portfolio as a scalable and pin-compatible MCU family that reuses the existing S08 core, intellectual property, and development tools. This ecosystem continuity reduces the engineering effort required to migrate designs between suitable family members. The MC9S08PL60CLD is therefore useful when a controller needs a modest Flash capacity, low-complexity logic, analog measurement, and an established 8-bit software toolchain rather than a high-performance 32-bit application processor.
Typical applications include industrial control panels, motor and actuator controllers, building equipment, consumer appliances, sensor nodes, and compact embedded systems. The 20 MHz CPU supports responsive foreground and background tasks, while the ADC and comparator reduce the need for external signal-conditioning components in straightforward measurement designs. Timers can provide deterministic service intervals for communications, debouncing, pulse generation, or motor-control functions.
Designers should select capacitors, clock components, programming connections, and interface protection to match the voltage and timing requirements in the MC9S08PL60 Series Data Sheet. Because firmware, reset behavior, clock configuration, and peripheral assignments are application-specific, validate the complete pin, voltage, and timing configuration against the manufacturer datasheet before releasing PCB artwork or production firmware.
This product overview consolidates the core identity, memory capacity, clock speed, package, analog resources, lifecycle status, and procurement information for MC9S08PL60CLD. It also provides application guidance, design checks, and a disciplined comparison framework for engineers evaluating MCU upgrades, second-source decisions, and board-level alternatives.
Alternatives de remplacement direct pour MC9S08PL60CLD — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesMC9S08PL60CLD Valeurs maximales et caractéristiques électriques
| Product Type | 8-bit S08P microcontroller |
| Maximum CPU Frequency | 20 MHz |
| Flash Memory | 60 KB (60K x 8 bits) |
| ADC Resolution | 10 bits |
| Analog Comparator | Integrated |
| Tension d'alimentation | 5 V |
| CPU Architecture | 8-bit S08 CPU |
| Boîtier | 44-LQFP, 10 mm x 10 mm |
| Type de montage | Surface mount |
Guide de configuration des broches du MC9S08PL60CLD 44-lqfp, 10 mm x 10 mm
Configuration des broches du MC9S08PL60CLD (boîtier 44-lqfp, 10 mm x 10 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour MC9S08PL60CLD.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MC9S08PL60CLD convient pour 6 applications: Industrial Control Panel, Sensor Conditioning Node, Appliance Control, Motor and Actuator Controller, Building Equipment Interface, Battery-Powered Embedded Module.
Industrial Control Panel
The MC9S08PL60CLD fits compact industrial control panels that combine pushbutton or switch inputs, status indicators, relay or solenoid outputs, and periodic sensing. Its 20 MHz S08 CPU provides sufficient throughput for state-machine control and communication tasks, while the 10-bit ADC supports basic analog monitoring. The 60 KB Flash capacity is useful for parameter tables, diagnostic logic, and production calibration routines. Place the MCU between the input conditioning network, output drivers, and serial interface. The main design consideration is timing margin: use the flexible timers for debouncing, sampling, and actuator updates rather than relying on unpredictable software delays. Validate supply levels, reset behavior, protection networks, and isolation requirements for the target industrial environment before deployment.
Recommandé
Sensor Conditioning Node
The MC9S08PL60CLD is appropriate for a compact sensor node that converts analog inputs into usable measurements and applies thresholds or calibration. Its 10-bit ADC and integrated analog comparator reduce the need for separate conversion circuitry in basic measurement systems, while the 8-bit processor can perform offset, gain, filtering, and limit calculations. The 60 KB Flash footprint can store calibration coefficients and application-specific firmware, and integrated EEPROM is useful for configuration or service data. In the circuit, place the ADC source close to the controller and use the analog comparator for fast threshold events. Validate the full-scale input range, sample time, reference stability, and input impedance against the sensor characteristics rather than assuming that all analog sources can drive the ADC directly.
Recommandé
Appliance Control
MC9S08PL60CLD can serve as the central controller in a cost-conscious appliance that combines motor or valve control, temperature sensing, user inputs, and fault handling. The 20 MHz operating frequency supports responsive task scheduling, and the flexible timers can generate motor-control, pulse-width, or periodic-service timing. Its 60 KB Flash provides room for a structured control program, operating modes, diagnostic codes, and lookup tables. Integrated EEPROM can preserve configuration values that must survive power loss. A practical implementation should use the timer channels for deterministic timing, keep high-current loads separated from sensitive analog paths, and provide fault-safe defaults when the MCU resets. Confirm operating-temperature limits and electromagnetic-compatibility requirements before using the device in an appliance control environment.
Recommandé
Motor and Actuator Controller
The MC9S08PL60CLD is suitable for basic motor, solenoid, or actuator control where an 8-bit MCU must coordinate timing, inputs, and fault handling. The 20 MHz S08 core can execute motion-state logic and supervisory functions, while flexible timers provide repeatable pulse and period generation. Its integrated 10-bit ADC may monitor current proxies, position sensors, or analog feedback, reducing external conversion components in modest designs. For implementation, define the required timer channel and pin mapping from the datasheet, keep motor-current return paths away from analog and clock circuitry, and use hardware enable or reset behavior for safe output states. Confirm whether the load-control topology requires external drivers, protection components, or a more deterministic real-time control loop than the S08 architecture provides.
Recommandé
Building Equipment Interface
MC9S08PL60CLD can act as a local interface controller for building equipment that must translate switches, sensors, and set points into actuator commands. Its integrated analog resources support simple supervisory measurements, while the 60 KB Flash capacity is appropriate for protocol handling, configuration menus, and diagnostic logic. The 8-bit architecture is particularly useful where the control task is distributed rather than computationally intensive. Build the design around deterministic timer-based scheduling, defined reset states, and a watchdog strategy appropriate for unattended equipment. Confirm supply tolerance, isolation, surge exposure, and operating-temperature requirements for the installation site. The final pin assignment and peripheral allocation must follow the manufacturer documentation so unused functions do not conflict with communications or actuator outputs.
Recommandé
Battery-Powered Embedded Module
The MC9S08PL60CLD can serve as the controller in a low-duty-cycle embedded module that periodically measures an input, evaluates conditions, and activates a communications or actuator function. Its 8-bit S08 core is suitable for this supervisory workload, and the integrated ADC, comparator, EEPROM, and timers reduce the need for separate support devices. Flash provides room for firmware updates and parameter storage, while EEPROM can retain operating settings. To minimize energy use, the firmware should use the MCU's documented low-power modes, disable unused peripherals, and schedule periodic wake events through a timer or external interrupt. Validate wake-up timing, reset behavior, brownout thresholds, and regulator efficiency for the intended battery system; average power cannot be selected from processor frequency alone.
Recommandé
Données de référence d'ingénierie pour MC9S08PL60CLD — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Package | 44-LQFP (10 mm x 10 mm) |
| Brand | NXP Semiconductors |
| CPU Architecture | 8-bit S08 |
| Maximum CPU Frequency | 20 MHz |
| Flash Memory | 60 KB (60K x 8 bits) |
| ADC Resolution | 10 bits |
| Analog Comparator | Integrated |
| Supply Voltage | 5 V |
| Lifecycle Status | Active |
Notes de conception
Use the exact 44-LQFP land pattern from the NXP package drawing and preserve the device's pin numbering orientation. The exposed lead geometry and 10 mm by 10 mm body size should be checked against the PCB fabrication stack-up rather than copied from a generic 44-pin library. Place decoupling capacitors close to the supply and ground pins, and route high-current or switching-node connections away from the MCU analog input and clock circuitry.
Design the supply rail around the device's documented operating voltage and current limits, including startup and peripheral-load effects. Provide local bulk and high-frequency decoupling, verify the power source's startup ramp, and ensure reset remains controlled during brownout conditions. The 20 MHz CPU rating is a processing specification, not a recommendation to operate the supply at an unverified voltage; confirm all operating and absolute-maximum limits in the manufacturer data sheet.
Separate analog measurement paths from digital switching and high-current return paths. Keep the ADC source routing short, use a quiet ground reference where the board topology permits it, and place input protection close to the connector. If the MCU uses an internal oscillator, maintain the recommended layout around its supply and clock-distribution pins. Validate final EMI and signal-integrity behavior on the assembled board because package placement alone does not guarantee acceptable analog performance.
Do not treat S08PL family naming as proof that every lower-memory or related device is a drop-in replacement. Confirm the exact ordering code, package dimensions, pin names, power pins, clock configuration, Flash capacity, EEPROM resources, and peripheral assignments. Likewise, do not omit the manufacturer-specified startup, programming, or unused-pin requirements. A schematic-level compatibility review followed by firmware and hardware validation prevents a family-level assumption from causing a board revision.
Informations de conformité
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for MC9S08PL60CLD. Confirm the current declarations and material documentation with NXP before environmental or regulatory qualification.