NXP Semiconductors

MC9S08PL60CLD - 8-Bit 20MHz 60KB Flash MCU | NXP

MPN: MC9S08PL60CLD ✓ فعال
5 V Vdss 44-LQFP, 10 mm x 10 mm Package 20 MHz Speed 60 KB (60K x 8 bits) Memory
حداقل سفارش: 1 |

MC9S08PL60CLD نمای کلی

The NXP Semiconductors MC9S08PL60CLD is an 8-bit S08P microcontroller with a 20 MHz operating frequency, 60 KB of Flash program memory, and a 44-LQFP package measuring 10 mm by 10 mm. The device combines an HCS08L-series S08 core with integrated EEPROM, a 10-bit analog-to-digital converter, an analog comparator, and flexible timers. It is designed for compact control systems that require deterministic embedded processing, mixed-signal measurement, and economical external storage.

An 8-bit microcontroller is a semiconductor device whose CPU and peripherals are optimized for embedded control, measurement, and simple digital logic. Within the broader hierarchy, the MC9S08PL60CLD is an MCU, a microcontroller, and a member of the HCS08 family of 8-bit embedded processors. Its compact instruction-oriented architecture, dedicated peripherals, and mixed-signal resources make it suitable for appliance control, industrial interfaces, sensing modules, and low-cost automation products.

The principal characteristics include 60 KB of Flash memory organized as 60K by 8 bits, a maximum clock frequency of 20 MHz, and operation from a 5 V supply as described for the S08P family. Integrated EEPROM preserves calibration or configuration data without consuming Flash program space. The 10-bit ADC and analog comparator support sensor interfaces, while flexible timers help implement periodic sampling, motor or valve control, and industrial timing functions.

NXP describes the S08P portfolio as a scalable and pin-compatible MCU family that reuses the existing S08 core, intellectual property, and development tools. This ecosystem continuity reduces the engineering effort required to migrate designs between suitable family members. The MC9S08PL60CLD is therefore useful when a controller needs a modest Flash capacity, low-complexity logic, analog measurement, and an established 8-bit software toolchain rather than a high-performance 32-bit application processor.

Typical applications include industrial control panels, motor and actuator controllers, building equipment, consumer appliances, sensor nodes, and compact embedded systems. The 20 MHz CPU supports responsive foreground and background tasks, while the ADC and comparator reduce the need for external signal-conditioning components in straightforward measurement designs. Timers can provide deterministic service intervals for communications, debouncing, pulse generation, or motor-control functions.

Designers should select capacitors, clock components, programming connections, and interface protection to match the voltage and timing requirements in the MC9S08PL60 Series Data Sheet. Because firmware, reset behavior, clock configuration, and peripheral assignments are application-specific, validate the complete pin, voltage, and timing configuration against the manufacturer datasheet before releasing PCB artwork or production firmware.

This product overview consolidates the core identity, memory capacity, clock speed, package, analog resources, lifecycle status, and procurement information for MC9S08PL60CLD. It also provides application guidance, design checks, and a disciplined comparison framework for engineers evaluating MCU upgrades, second-source decisions, and board-level alternatives.

جایگزین‌های drop-in برای MC9S08PL60CLD — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

هیچ جایگزین مستقیمی برای این محصول موجود نیست.

درخواست جایگزین

MC9S08PL60CLD حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type 8-bit S08P microcontroller
Maximum CPU Frequency 20 MHz
Flash Memory 60 KB (60K x 8 bits)
ADC Resolution 10 bits
Analog Comparator Integrated
ولتاژ تغذیه 5 V
CPU Architecture 8-bit S08 CPU
بسته‌بندی 44-LQFP, 10 mm x 10 mm
نوع نصب Surface mount

راهنمای پیکربندی پین MC9S08PL60CLD 44-lqfp, 10 mm x 10 mm

پیکربندی پین برای MC9S08PL60CLD (پکیج 44-lqfp, 10 mm x 10 mm). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 44-lqfp, 10 mm x 10 mm برای MC9S08PL60CLD

داده پین‌آوت تفصیلی موجود نیست برای MC9S08PL60CLD.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MC9S08PL60CLD مناسب است برای 6 کاربردs: Industrial Control Panel, Sensor Conditioning Node, Appliance Control, Motor and Actuator Controller, Building Equipment Interface, Battery-Powered Embedded Module.

🏭

Industrial Control Panel

The MC9S08PL60CLD fits compact industrial control panels that combine pushbutton or switch inputs, status indicators, relay or solenoid outputs, and periodic sensing. Its 20 MHz S08 CPU provides sufficient throughput for state-machine control and communication tasks, while the 10-bit ADC supports basic analog monitoring. The 60 KB Flash capacity is useful for parameter tables, diagnostic logic, and production calibration routines. Place the MCU between the input conditioning network, output drivers, and serial interface. The main design consideration is timing margin: use the flexible timers for debouncing, sampling, and actuator updates rather than relying on unpredictable software delays. Validate supply levels, reset behavior, protection networks, and isolation requirements for the target industrial environment before deployment.

🧩

Sensor Conditioning Node

The MC9S08PL60CLD is appropriate for a compact sensor node that converts analog inputs into usable measurements and applies thresholds or calibration. Its 10-bit ADC and integrated analog comparator reduce the need for separate conversion circuitry in basic measurement systems, while the 8-bit processor can perform offset, gain, filtering, and limit calculations. The 60 KB Flash footprint can store calibration coefficients and application-specific firmware, and integrated EEPROM is useful for configuration or service data. In the circuit, place the ADC source close to the controller and use the analog comparator for fast threshold events. Validate the full-scale input range, sample time, reference stability, and input impedance against the sensor characteristics rather than assuming that all analog sources can drive the ADC directly.

🔧

Appliance Control

MC9S08PL60CLD can serve as the central controller in a cost-conscious appliance that combines motor or valve control, temperature sensing, user inputs, and fault handling. The 20 MHz operating frequency supports responsive task scheduling, and the flexible timers can generate motor-control, pulse-width, or periodic-service timing. Its 60 KB Flash provides room for a structured control program, operating modes, diagnostic codes, and lookup tables. Integrated EEPROM can preserve configuration values that must survive power loss. A practical implementation should use the timer channels for deterministic timing, keep high-current loads separated from sensitive analog paths, and provide fault-safe defaults when the MCU resets. Confirm operating-temperature limits and electromagnetic-compatibility requirements before using the device in an appliance control environment.

⚡

Motor and Actuator Controller

The MC9S08PL60CLD is suitable for basic motor, solenoid, or actuator control where an 8-bit MCU must coordinate timing, inputs, and fault handling. The 20 MHz S08 core can execute motion-state logic and supervisory functions, while flexible timers provide repeatable pulse and period generation. Its integrated 10-bit ADC may monitor current proxies, position sensors, or analog feedback, reducing external conversion components in modest designs. For implementation, define the required timer channel and pin mapping from the datasheet, keep motor-current return paths away from analog and clock circuitry, and use hardware enable or reset behavior for safe output states. Confirm whether the load-control topology requires external drivers, protection components, or a more deterministic real-time control loop than the S08 architecture provides.

🏠

Building Equipment Interface

MC9S08PL60CLD can act as a local interface controller for building equipment that must translate switches, sensors, and set points into actuator commands. Its integrated analog resources support simple supervisory measurements, while the 60 KB Flash capacity is appropriate for protocol handling, configuration menus, and diagnostic logic. The 8-bit architecture is particularly useful where the control task is distributed rather than computationally intensive. Build the design around deterministic timer-based scheduling, defined reset states, and a watchdog strategy appropriate for unattended equipment. Confirm supply tolerance, isolation, surge exposure, and operating-temperature requirements for the installation site. The final pin assignment and peripheral allocation must follow the manufacturer documentation so unused functions do not conflict with communications or actuator outputs.

🔋

Battery-Powered Embedded Module

The MC9S08PL60CLD can serve as the controller in a low-duty-cycle embedded module that periodically measures an input, evaluates conditions, and activates a communications or actuator function. Its 8-bit S08 core is suitable for this supervisory workload, and the integrated ADC, comparator, EEPROM, and timers reduce the need for separate support devices. Flash provides room for firmware updates and parameter storage, while EEPROM can retain operating settings. To minimize energy use, the firmware should use the MCU's documented low-power modes, disable unused peripherals, and schedule periodic wake events through a timer or external interrupt. Validate wake-up timing, reset behavior, brownout thresholds, and regulator efficiency for the intended battery system; average power cannot be selected from processor frequency alone.

What is the MC9S08PL60CLD?
The MC9S08PL60CLD is an active NXP Semiconductors 8-bit S08P microcontroller rated for operation up to 20 MHz, with 60 KB of Flash memory and integrated EEPROM. According to the NXP MC9S08PL60 Series Data Sheet, the device also includes a 10-bit ADC, an analog comparator, and flexible timers in a 44-LQFP package measuring 10 mm by 10 mm.
How much Flash memory and EEPROM does the MC9S08PL60CLD have?
The MC9S08PL60CLD provides 60 KB of Flash program memory, arranged as 60K by 8 bits. The NXP product page also identifies integrated EEPROM for retaining parameter data or calibration values outside the Flash program area. The exact EEPROM capacity and organization are specified in the MC9S08PL60 Series Data Sheet and should be used when sizing nonvolatile storage requirements.
What is the maximum clock frequency of the MC9S08PL60CLD?
The MC9S08PL60CLD operates at a maximum CPU frequency of 20 MHz. This clock rate makes the 8-bit S08 processor suitable for responsive embedded-control loops, digital state machines, timer-based peripherals, and moderate data acquisition. Clock-source requirements, divider settings, and operating-mode transitions must be configured according to the NXP MC9S08PL60 Series Data Sheet.
What package does the MC9S08PL60CLD use?
The MC9S08PL60CLD is supplied in a 44-LQFP package with a 10 mm by 10 mm body size. LQFP provides a high pin count and visible leads that facilitate inspection and board assembly. Because the exact pin assignments and exposed thermal-pad treatment must match the PCB footprint, use the manufacturer pin description and package drawing during schematic capture and layout.
Where can I download the MC9S08PL60CLD datasheet PDF?
The official MC9S08PL60CLD datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/MC9S08PL60.pdf. The document is titled MC9S08PL60 Series Data Sheet and covers the S08P MCU family. It is the controlling reference for electrical limits, pin descriptions, memory organization, clock behavior, peripherals, programming, and package dimensions.
Where can I find the MC9S08PL60CLD pinout?
The MC9S08PL60CLD pinout is documented in the pin-description section and package drawing of the NXP MC9S08PL60 Series Data Sheet. The device uses 44-LQFP packaging, but the physical board footprint must be based on the manufacturer drawing rather than a generic library footprint. Confirm every signal, power pin, ground pin, and reserved connection before releasing production artwork.
Where can I buy MC9S08PL60CLD online?
MC9S08PL60CLD can be requested through the Request a Quote form on this page, where the exact suffix, quantity, and supply requirements can be entered. The manufacturer lists the component as active. Current inventory, lead time, and commercial terms should be confirmed through the quote workflow rather than relying on a static catalog listing.
What is the price of MC9S08PL60CLD?
The commercial price of MC9S08PL60CLD depends on order quantity, package quantity, and current market availability. Use the Request a Quote form on this page for a current quotation for the exact MC9S08PL60CLD. The form is the appropriate channel for confirming unit pricing, scheduled delivery, and shipment quantities without embedding a potentially stale price.
Is MC9S08PL60CLD in stock and what is its lead time?
MC9S08PL60CLD is identified as active by NXP, but current stock and production lead time should be confirmed through the Request a Quote form on this page. Include the required quantity, target date, and permitted shipment method in the request so the commercial response can reflect the actual procurement schedule and avoid reliance on an outdated availability indication.
When should I choose the MC9S08PL60CLD over another 8-bit MCU?
Choose the MC9S08PL60CLD when a design needs an S08-compatible control solution with 60 KB of Flash, a 20 MHz clock, integrated EEPROM, a 10-bit ADC, an analog comparator, and flexible timers in a 44-LQFP package. Its strongest advantage is continuity with the established S08 core, intellectual property, and development tools rather than higher processing throughput than a 32-bit MCU.
Is MC9S08PL60CLD suitable for industrial control and sensor applications?
Yes, MC9S08PL60CLD is suitable for many industrial-control, sensor, appliance, and compact automation designs. Its 10-bit ADC supports basic analog measurement, the analog comparator supports threshold and signal-quality functions, and the flexible timers support deterministic periodic tasks. Confirm operating-temperature, ESD, and electrical requirements against the application specification before production release.
What can replace the MC9S08PL60CLD?
A true replacement for MC9S08PL60CLD must use the same 44-LQFP footprint, provide pin-to-pin signal compatibility, and match critical resources such as Flash capacity, EEPROM, clock rate, timers, ADC resolution, and supply voltage. NXP identifies the S08P portfolio as scalable and pin-compatible, but no specific drop-in substitute was confirmed from the available cross-reference results, so a candidate should be validated against the manufacturer pin table before use.
MC9S08PL60CLD vs MC9S08PA60VLD and MC9S08PT60VLC: which is the best replacement?
MC9S08PL60CLD should not be declared interchangeable with MC9S08PA60VLD or MC9S08PT60VLC based on family naming alone. A valid replacement requires identical package dimensions, pin-to-pin compatibility, and equivalent critical resources including 60 KB Flash, EEPROM, 20 MHz operation, analog conversion, timers, and supply requirements. Review each device's manufacturer datasheet and migrate only after a complete pin and peripheral mapping.
What are the key specifications of MC9S08PL60CLD that engineers should know?
The key MC9S08PL60CLD specifications are 8-bit S08 architecture, 20 MHz maximum operation, 60 KB Flash, integrated EEPROM, a 10-bit ADC, an analog comparator, flexible timers, 5 V operation, and a 44-LQFP 10 mm by 10 mm package. These values place the MCU in the low-complexity embedded-control class with enough mixed-signal resources for sensors, actuators, and appliance-style products.
Is the MC9S08PL60CLD the same as an S08PL4 or S08PL8 device?
No. MC9S08PL60CLD belongs to the S08PL family but contains 60 KB of Flash, whereas S08PL4 and S08PL8 identify lower-memory family members. Those lower-memory versions can have different memory ceilings and may not support the same firmware footprint or all application requirements. Use the complete ordering code and memory comparison from the MC9S08PL60 Series Data Sheet when evaluating a downgrade.

داده‌های مرجع مهندسی برای MC9S08PL60CLD — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the MC9S08PL60CLD when an embedded design needs an established 8-bit S08 control platform with 60 KB of Flash, a 20 MHz clock, integrated EEPROM, a 10-bit ADC, an analog comparator, and flexible timers. It is especially appropriate for appliance controls, industrial panels, sensor nodes, and compact actuator systems where an 8-bit processor is sufficient and the S08 toolchain and peripheral ecosystem offer practical benefits. Consider a higher-performance 32-bit MCU when the application requires greater processing bandwidth, larger memory, or more extensive communications. Consider another S08 member when its Flash, package, or peripheral set is sufficient and cost or availability is the priority. Do not approve a substitute solely because its family name is similar: verify the physical footprint, every assigned pin, critical peripheral resources, supply requirements, and firmware behavior against the manufacturer documentation.

مقایسه با جایگزین‌ها

پارامتر این محصول
Package 44-LQFP (10 mm x 10 mm)
Brand NXP Semiconductors
CPU Architecture 8-bit S08
Maximum CPU Frequency 20 MHz
Flash Memory 60 KB (60K x 8 bits)
ADC Resolution 10 bits
Analog Comparator Integrated
Supply Voltage 5 V
Lifecycle Status Active

یادداشت‌های طراحی

Use the exact 44-LQFP land pattern from the NXP package drawing and preserve the device's pin numbering orientation. The exposed lead geometry and 10 mm by 10 mm body size should be checked against the PCB fabrication stack-up rather than copied from a generic 44-pin library. Place decoupling capacitors close to the supply and ground pins, and route high-current or switching-node connections away from the MCU analog input and clock circuitry.

Design the supply rail around the device's documented operating voltage and current limits, including startup and peripheral-load effects. Provide local bulk and high-frequency decoupling, verify the power source's startup ramp, and ensure reset remains controlled during brownout conditions. The 20 MHz CPU rating is a processing specification, not a recommendation to operate the supply at an unverified voltage; confirm all operating and absolute-maximum limits in the manufacturer data sheet.

Separate analog measurement paths from digital switching and high-current return paths. Keep the ADC source routing short, use a quiet ground reference where the board topology permits it, and place input protection close to the connector. If the MCU uses an internal oscillator, maintain the recommended layout around its supply and clock-distribution pins. Validate final EMI and signal-integrity behavior on the assembled board because package placement alone does not guarantee acceptable analog performance.

Do not treat S08PL family naming as proof that every lower-memory or related device is a drop-in replacement. Confirm the exact ordering code, package dimensions, pin names, power pins, clock configuration, Flash capacity, EEPROM resources, and peripheral assignments. Likewise, do not omit the manufacturer-specified startup, programming, or unused-pin requirements. A schematic-level compatibility review followed by firmware and hardware validation prevents a family-level assumption from causing a board revision.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for MC9S08PL60CLD. Confirm the current declarations and material documentation with NXP before environmental or regulatory qualification.

تاریخ تأیید داده‌ها: 2026-11-15 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

MC9S08PL60CLD datasheet MC9S08PL60CLD pinout MC9S08PL60CLD datasheet pdf MC9S08PL60CLD specifications MC9S08PL60CLD 20MHz MC9S08PL60CLD 60KB Flash MC9S08PL60CLD equivalent MC9S08PL60CLD replacement MC9S08PL60CLD price MC9S08PL60CLD stock NXP MC9S08PL60CLD MC9S08PL60CLD LQFP footprint MC9S08PL60CLD ADC application MC9S08PL60CLD programming

قطعات و اصطلاحات مرتبط

NXP Semiconductors MC9S08PL60CLD MC9S08PL60 S08P S08 HCS08 microcontroller MCU 8-bit microcontroller embedded processor semiconductor 20 MHz 60 KB Flash 60K x 8 Flash EEPROM 10-bit ADC analog comparator flexible timers 44-LQFP LQFP surface mount industrial control sensor conditioning appliance control motor control
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ