Microchip Technology

MCP6004-I/SL - Quad 1MHz R-R Op Amp | Microchip Technology

Référence : MCP6004-I/SL ✓ Actif
1.8 V to 6 V Vdss 100 µA Id 14-lead SOIC Package
MOQ : 1 |

MCP6004-I/SL Présentation

The Microchip Technology MCP6004-I/SL is a quad general-purpose operational amplifier with rail-to-rail input and output, a 1.8 V to 6 V operating range, a typical 1 MHz gain-bandwidth product, and a typical 100 µA quiescent current. The device is supplied in a 14-lead SOIC package designated by the SL suffix.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its non-inverting and inverting inputs. The MCP6004 belongs to the operational-amplifier hierarchy, where it sits below the general-purpose amplifier category and above the CMOS low-power amplifier class. Four amplifiers in one package make it useful for multi-channel analog systems where several low-frequency signals must be amplified, buffered, or filtered.

Rail-to-rail input allows the MCP6004 to accept signals close to either supply rail, while rail-to-rail output improves output-voltage range at light load. Its typical 1 MHz gain-bandwidth product supports general-purpose low-frequency signal paths. The typical 100 µA quiescent current also makes the device suitable for portable, battery-powered, and low-power sensor equipment when operating speed is not the primary requirement.

The MCP6004 family uses a CMOS-based operational-amplifier architecture optimized for low power and low cost. With four rail-to-rail amplifiers in one 14-lead SOIC, it reduces component count in designs requiring multiple channels. The operating voltage range of 1.8 V to 6 V supports systems built around low-voltage rails, although the selected amplifier must also satisfy required output swing, input common-mode range, noise, stability, and precision requirements.

Typical uses include sensor-signal conditioning, low-voltage data acquisition, audio input stages, general buffering, and four-channel filtering. In a sensor interface, the amplifier can increase the usable level of a low-amplitude transducer signal before conversion or control. In portable instrumentation, low quiescent current helps preserve battery life, while the four-channel package reduces board area.

Circuit design should account for the amplifier's gain-bandwidth limit and the stability requirements of the feedback network. Place input and output components close to the device, maintain the recommended bypass capacitance, and verify that source impedance, load capacitance, and noise gain do not compromise stability. The manufacturer datasheet should be used for the complete pin-description table and application limits.

This product page combines the manufacturer's operating-range and performance information with package details, practical application guidance, and verified drop-in replacement options. It also provides pin-focused search coverage and comparison parameters that help engineers evaluate the MCP6004-I/SL for low-voltage, low-power analog designs.

Alternatives de remplacement direct pour MCP6004-I/SL — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec MCP6004-I/SL (même facteur de forme et même empreinte) — différant par Package, Number of Channels, Amplifier Type, Supply Voltage Range, Input Common-Mode Range.

Microchip Technology
Package: 8-pin SOIC (SN)
Number of Channels: 2 (dual)
Supply Voltage Range: 1.8 V to 6.0 V
Microchip Technology
Number of Channels: 4 circuits
Input Common-Mode Range: Rail-to-rail
Microchip Technology
Package: 8-pin SOIC
Number of Channels: 2 channels
Amplifier Type: Dual voltage-feedback operational amplifier
Texas Instruments
Package: 14-pin SOIC (D)
Number of Channels: 4 (Quad)
Amplifier Type: CMOS, Rail-to-Rail Input and Output (RRIO)

MCP6004-E/SL

✅ Remplacement direct
Microchip Technology
📦 SOIC-14 (SL)
Quad general-purpose operational amplifier · 4 circuits · 1.8 V to 6 V · Rail-to-rail · Rail-to-rail · 1 MHz · 100 µA · 0.6 V/µs

Contactez-nous pour le prix

Voir la fiche technique →

MCP6004T-I/SL

✅ Remplacement direct
📦 SOIC-14 (SL)
Same 1.8 V to 6 V supply and 1 MHz bandwidth family ratings; the I-grade temperature range is -40 °C to +85 °C and ordering-code details should be checked.

📋 Alternative de référence (hors catalogue)

MCP6004-E/SLVAO

✅ Remplacement direct
📦 SOIC-14 (SL)
Automotive-oriented ordering variant with the same core amplifier family; qualification and temperature limits differ from the standard MCP6004-I/SL.

📋 Alternative de référence (hors catalogue)

MCP607-I/SN

✅ Remplacement direct
Microchip Technology
📦 SOIC-14 (SN)
Dual voltage-feedback operational amplifier · 2 channels · 2.5 V to 6.0 V · 18.7 uA · 155 kHz · <250 uV

Contactez-nous pour le prix

Voir la fiche technique →

LMV324IDT

✅ Remplacement direct
📦 SOIC-14 (DT)
Typical gain-bandwidth product is 1 MHz, matching the MCP6004-I/SL within 0%; supply, input-common-mode, output-swing, noise, and temperature limits must be revalidated.

📋 Alternative de référence (hors catalogue)

MCP6004-I/SL Valeurs maximales et caractéristiques électriques

Amplifier Type Quad general-purpose operational amplifier
Number of Amplifiers 4 circuits
Supply Voltage Range 1.8 V to 6 V
Typical Gain-Bandwidth Product 1 MHz
Typical Quiescent Current 100 µA
Input Type Rail-to-rail
Type de sortie Rail-to-rail
Technology CMOS
Boîtier 14-lead SOIC
Package Designator SL
Plage de température de fonctionnement -40 °C to +85 °C
Country of Origin Thailand
Type de montage Surface mount
Nombre de broches 14 pins
Typical Phase Margin 90°

Guide de configuration des broches du MCP6004-I/SL sl

Configuration des broches du MCP6004-I/SL (boîtier sl). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier sl pour le MCP6004-I/SL

Aucune donnée de brochage détaillée disponible pour MCP6004-I/SL.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

MCP6004-I/SL convient pour 6 applications: Low-Voltage Sensor Signal Conditioning, Portable Data Acquisition, Audio Input Buffering, Industrial Control Interfaces, Active Filtering and Signal Conditioning, Low-Power Embedded Control.

🧩

Low-Voltage Sensor Signal Conditioning

The MCP6004-I/SL fits four-channel sensor interfaces that operate from 1.8 V to 6 V and require a compact, low-power amplification stage. Its rail-to-rail input capability helps preserve signals positioned near the supply rails, while the typical 100 µA quiescent current limits amplifier overhead in battery-powered systems. The four amplifiers can condition outputs from resistive, capacitive, or low-level transducer sensors before an ADC or controller samples them. Its 1 MHz typical gain-bandwidth product is sufficient for many low-frequency measurement paths, although sensor bandwidth, source impedance, and required closed-loop gain determine the final margin. Stable operation should be checked with the actual sensor impedance and filter network.

📱

Portable Data Acquisition

MCP6004-I/SL is well suited to portable measurement systems requiring several analog channels without a large power budget. Its typical 100 µA quiescent current is valuable in instrument designs that operate from a 3.3 V or 5 V battery-derived rail, while rail-to-rail input and output operation increases usable signal span in low-voltage systems. Four independent channels can amplify sensor outputs, buffer ADC inputs, or form active analog filters. The 1 MHz gain-bandwidth product supports low-frequency acquisition signals rather than high-speed waveform capture, and system designers should include output-swing, capacitive-load, and stability checks. Proper bypassing close to the supply pins helps maintain predictable analog performance.

🎧

Audio Input Buffering

The MCP6004-I/SL can provide input buffering and gain stages for low-voltage audio or microphone circuits. Rail-to-rail input and output operation helps maintain signal headroom in portable equipment operating from 1.8 V to 6 V, while the typical 100 µA quiescent current supports battery-powered operation. The 1 MHz gain-bandwidth product is appropriate for voice-band and general audio paths, but users should evaluate noise, slew rate, output swing, and load impedance against their audio requirements. The four-channel package also supports a stereo implementation plus additional control or monitoring paths. A common-mode or differential input arrangement should be selected according to the source, and the manufacturer datasheet should guide gain and stability calculations.

🏭

Industrial Control Interfaces

MCP6004-I/SL is appropriate for low-level industrial interface circuits that process slow sensor and control signals. Its -40 °C to +85 °C specified temperature range covers many commercial and industrial environments, and four amplifiers allow multiple channels to share a compact 14-lead SOIC footprint. Rail-to-rail operation can improve conditioning of signals near the positive or negative rail in 3.3 V and 5 V systems. The amplifier is not intended for high-speed closed-loop servo loops at its 1 MHz typical gain-bandwidth product, so dynamic requirements must be checked. Input protection, filtering, grounding, and isolation should be handled at the interface boundary, while the amplifier provides the high-impedance gain and buffering stage.

⚡

Active Filtering and Signal Conditioning

MCP6004-I/SL can implement low-frequency active filters and general signal-conditioning blocks where four channels and low operating current are useful. Its typical 1 MHz gain-bandwidth product supports moderate-gain, low-frequency filter sections, while rail-to-rail input and output behavior can preserve signal range in low-voltage circuits. Each amplifier channel can be assigned to filtering, gain, active balancing, or buffering rather than requiring separate single-amplifier packages. Component tolerances, noise gain, and the operational-amplifier gain-bandwidth relationship must be considered when setting poles and Q. Capacitive loading and high source impedance can affect stability, so the complete network should be simulated and checked against the manufacturer guidance.

🔧

Low-Power Embedded Control

MCP6004-I/SL is suitable for embedded systems that need local analog amplification close to a microcontroller or mixed-signal processor. The typical 100 µA quiescent current complements low-power embedded-control designs, and the 1.8 V minimum supply supports low-energy systems. Four channels can serve sensor inputs, analog control outputs, and buffered feedback paths within one package. Rail-to-rail input and output operation is useful when the system does not permit conventional headroom for bipolar amplifier inputs or outputs. Designers should still include protection against transients, verify ADC input ranges, and avoid excessive capacitive loading at the amplifier output. The 1 MHz bandwidth is adequate for many control and monitoring loops but should be compared with the loop bandwidth.

What is the operating voltage of MCP6004-I/SL?
The MCP6004-I/SL operates from 1.8 V to 6 V. According to the Microchip MCP6004 product page, this range applies to the rail-to-rail input and output amplifier family, making the device appropriate for low-voltage systems using 1.8 V, 2.5 V, 3.3 V, or 5 V rails. The complete operating limits and electrical characteristics should be confirmed in the manufacturer datasheet for the selected temperature grade.
What are the key specifications of MCP6004-I/SL that engineers should know?
The MCP6004-I/SL is a four-channel, low-power CMOS operational amplifier with a typical 1 MHz gain-bandwidth product, typical 100 µA quiescent current, and rail-to-rail input and output operation. According to the Microchip MCP6004 product page, its 1.8 V to 6 V supply range and 14-lead SOIC package support compact, low-voltage analog designs where four amplifier channels are useful.
Where can I download the MCP6004-I/SL datasheet PDF?
The MCP6004-I/SL datasheet is available through the official Microchip MCP6004 product page at https://www.microchip.com/en-us/product/MCP6004. The product page provides the manufacturer datasheet and product resources. Use the manufacturer document for the complete electrical tables, test conditions, package drawings, and exact pin descriptions rather than relying on a distributor summary.
Where can I find the MCP6004-I/SL pinout?
The MCP6004-I/SL pin assignment is published in the Microchip manufacturer datasheet for the 14-lead SOIC package. The official product page is https://www.microchip.com/en-us/product/MCP6004. Use the pin-description table when assigning supply, ground, input, and output nets, especially because the MCP6004 contains four independent amplifier channels in one 14-pin package.
Is MCP6004-I/SL pin-compatible with MCP6004-E/SL?
The MCP6004-E/SL is a same-family candidate that uses the SL package and is identified by the cross-reference results as a direct comparison for MCP6004-I/SL. The principal engineering distinction is the temperature grade: MCP6004-I/SL is specified from -40 °C to +85 °C, while the E-grade limit must be confirmed from its datasheet. Verify the exact pinout and operating limits before substitution.
What can replace MCP6004-I/SL on the same PCB?
MCP6004-E/SL and MCP6004T-I/SL are same-brand drop-in candidates associated with the 14-lead SOIC family. The automotive-oriented MCP6004-E/SLVAO and the lower-bandwidth MCP607-I/SN are cross-family or cross-brand options only when their electrical limits are acceptable. No universal replacement should be selected without checking supply range, rail-to-rail behavior, stability, temperature range, and package pinout.
MCP6004-I/SL vs MCP6004-E/SL: which is better?
MCP6004-I/SL is the better choice when the required commercial temperature range extends to +85 °C. The manufacturer product listing identifies MCP6004-I/SL for -40 °C to +85 °C. MCP6004-E/SL remains a strong same-package family alternative for designs whose temperature and qualification requirements are met, but its exact temperature limits and automotive qualification status should be confirmed in the manufacturer datasheet.
When should I choose MCP6004-I/SL over MCP607-I/SN?
Choose MCP6004-I/SL when the design benefits from its higher 1 MHz typical gain-bandwidth product. The MCP607-I/SN is a lower-bandwidth candidate and therefore has less bandwidth for the same closed-loop gain, although the trade may still be acceptable in slow sensor or buffer circuits. The MCP6004-I/SL is preferable when the required signal bandwidth cannot be met by the alternative.
Is MCP6004-I/SL suitable for battery-powered sensor circuits?
The MCP6004-I/SL is suitable for battery-powered sensor circuits when low quiescent current is more important than high bandwidth. Its typical quiescent current is 100 µA, while the 1.8 V to 6 V supply range supports low-voltage portable systems. Rail-to-rail input and output can improve usable signal range, although total current, sensor current, and shutdown behavior must also be included in the system power budget.
What can replace MCP6004-I/SL with a 1 MHz op amp?
A drop-in candidate must use the same 14-lead SOIC footprint and provide approximately the same 1 MHz bandwidth. MCP6004-E/SL and MCP6004T-I/SL are the closest same-brand family choices identified in the cross-reference results, while LMV324IDT is a cross-brand 1 MHz quad-amplifier candidate. Confirm pin-to-pin compatibility and all DC, AC, common-mode, and temperature limits before committing to a replacement.
Where to buy MCP6004-I/SL online?
Use the Request a Quote form on this page to request MCP6004-I/SL availability, lead time, and a current quotation. The Microchip manufacturer listing identifies the part as available with a listed operating range of -40 °C to +85 °C. Current stock and delivery timing can change, so submit the exact MPN and required quantity through the quote workflow before committing the component to a production schedule.
What is the price of MCP6004-I/SL?
Submit the MCP6004-I/SL request through the Request a Quote form on this page for the current unit price, volume tiers, stock position, and lead time. Marketplace pricing changes with quantity, inventory, and currency, so a static quotation can become obsolete. The exact MPN and requested package quantity should be included to obtain an actionable commercial response.
What is the lead time and stock status for MCP6004-I/SL?
Request current stock and lead-time confirmation through the Request a Quote form on this page. The manufacturer listing identifies MCP6004-I/SL and indicates a -40 °C to +85 °C temperature range, but it does not provide a fixed delivery interval in the product summary. Share your required quantity, target date, and approved sourcing status so the response reflects the current supply position.
How much bandwidth does MCP6004-I/SL provide?
The MCP6004-I/SL provides a typical gain-bandwidth product of 1 MHz. According to the Microchip MCP6004 product page, the device is a 1 MHz low-power quad amplifier. Actual closed-loop bandwidth also depends on the selected noise gain and the application circuit, so use the manufacturer performance curves when gain, output loading, and stability margin matter.
Is MCP6004-I/SL compliant with RoHS and REACH?
The MCP6004-I/SL should not be treated as RoHS-, REACH-, or AEC-Q100-compliant without checking the current manufacturer product declaration or material compliance documentation. The official Microchip product page is the appropriate starting point for current compliance records. For regulated production, obtain the applicable declarations and confirm that the exact MCP6004-I/SL ordering code and package are covered.

Données de référence d'ingénierie pour MCP6004-I/SL — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose MCP6004-I/SL when a design needs four general-purpose amplifier channels, rail-to-rail input and output operation, a 1.8 V to 6 V supply range, and low typical quiescent current. It is particularly suitable for portable instrumentation, low-frequency sensor conditioning, audio buffering, and compact analog control systems. MCP6004-E/SL is the closest same-family option when its temperature rating satisfies the product requirements. MCP6004T-I/SL may suit procurement or temperature-grade requirements that align with that ordering code, while MCP6004-E/SLVAO is relevant when automotive qualification is required. Choose MCP607-I/SN only when its lower bandwidth remains adequate and the reduced performance is acceptable. LMV324IDT is a cross-brand option for a 1 MHz quad amplifier, but its supply range, input behavior, output swing, noise, temperature limits, and exact pin mapping must be checked. For any substitution, verify the 14-lead SOIC pinout against the manufacturer datasheet rather than relying only on package similarity.

Comparaison avec les alternatives

Paramètre Ce produit MCP6004-E/SL MCP6004T-I/SL MCP6004-E/SLVAO MCP607-I/SN LMV324IDT
Package SOIC-14 (SL) SOIC-14 (SL) SOIC-14 (SL) SOIC-14 (SL) SOIC-14 (SN) SOIC-14 (DT)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Texas Instruments
Amplifier Configuration Quad Quad Quad Quad Quad Quad

Principaux différenciateurs

  • Higher bandwidth than the MCP607-I/SN candidate (vs MCP607-I/SN)
  • Four rail-to-rail channels in one SOIC package (vs LMV324IDT)
  • Specified industrial temperature coverage (vs MCP6004-E/SL)

Notes de conception

Place the amplifier input, feedback, and decoupling components close to their associated pins. The four channels share common supply pins, so adequate high-frequency bypass capacitance and short ground-return paths help prevent supply noise from coupling into multiple channels simultaneously. Route sensitive input traces away from switching nodes and power-stage outputs, and use a continuous ground plane to reduce return-path discontinuities.

Do not assume that rail-to-rail operation eliminates output-swing or input-range restrictions under every load condition. The actual signal must remain within the datasheet input common-mode range and output voltage limits, including margin for load current, temperature, and process variation. Also verify stable operation with the selected feedback network, source impedance, and capacitive load before releasing the PCB design.

The typical 1 MHz gain-bandwidth product limits usable closed-loop bandwidth and influences the maximum practical noise gain at a required signal frequency. Calculate the closed-loop bandwidth for each channel and add margin for filter roll-off and component tolerances. When driving an ADC, buffer the amplifier output with isolation resistance or an additional buffer if the sampling network introduces excessive capacitive loading.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

Current material-compliance declarations and exact automotive qualification status were not included in the manufacturer product summary. Obtain declarations for MCP6004-I/SL before use in regulated production.

Recherches associées

mcp6004 i sl datasheet mcp6004 datasheet mcp6004 op amp mcp6004 pins mcp6004 equivalent mcp6004 datasheet pdf mcp6004 alternative mcp6004 ic pinout MCP6004-I/SL SOIC-14 pinout MCP6004-I/SL drop-in replacement MCP6004-I/SL vs MCP6004-E/SL MCP6004-I/SL price Microchip Technology MCP6004-I/SL MCP6004-I/SL application circuit

Composants & termes associés

Microchip Technology MCP6004-I/SL MCP6004 MCP6004-E/SL MCP6004T-I/SL MCP6004-E/SLVAO MCP607-I/SN LMV324IDT Operational amplifier General-purpose amplifier Low-power amplifier CMOS operational amplifier Quad amplifier Rail-to-rail input Rail-to-rail output Gain-bandwidth product Quiescent current Common-mode range SOIC-14 Surface-mount package Sensor signal conditioning Portable data acquisition Audio buffering Industrial control interfaces Active filtering
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ