Microchip Technology

MCP621-E/SN - 20MHz RRIO Op Amp | Microchip Technology

Référence : MCP621-E/SN ✓ Actif
2.5 mA Id 8-pin SOIC Package
MOQ : 1 |

MCP621-E/SN Présentation

Microchip Technology MCP621-E/SN is a single operational amplifier with a 20 MHz gain-bandwidth product, 2.5 mA typical operating current, rail-to-rail input and output capability, and an 8-pin SOIC package. The device belongs to the MCP62x family, whose amplifiers self-calibrate at power-up using Microchip's mCal technology to reduce input offset voltage. Its combination of bandwidth, low current consumption, and compact packaging makes it suitable for portable instrumentation, sensor interfaces, audio paths, and general-purpose analog signal conditioning.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its non-inverting and inverting inputs. High-gain linear-regulator behavior inside the amplifier produces an output that moves toward the input differential multiplied by the closed-loop gain. The MCP621-E/SN is therefore part of the operational-amplifier, analog-amplifier, and signal-conditioning hierarchy, while its rail-to-rail operation helps preserve signal range in low-voltage systems.

The 20 MHz gain-bandwidth product provides substantial bandwidth for a low-power general-purpose amplifier. A 2.5 mA operating current supports portable and energy-conscious designs, while rail-to-rail inputs and outputs improve usable voltage range near the supply rails. Low input offset voltage, enabled by startup self-calibration, is especially useful for current sensing, bridge-sensor interfaces, and precision feedback networks where offset can directly create measurement error.

The MCP62x architecture performs an offset calibration during power-up, improving initial accuracy without requiring an external trimmer. This calibration is internal and does not require periodic user adjustment. Designers should still account for input bias current, input common-mode behavior, output swing, noise, and stability when selecting external resistors or adding capacitive loads. For non-inverting and inverting closed-loop configurations, standard feedback-network practices remain necessary.

Typical uses include low-power sensor conditioning, portable measurement systems, buffered analog inputs, audio preamplification, and general signal processing. In battery-powered equipment, the 2.5 mA operating current helps limit continuous consumption. In higher-frequency instrumentation, the 20 MHz bandwidth supports faster closed-loop response, although board layout and capacitive-load stability require attention.

Choose the MCP621-E/SN when an 8-pin SOIC footprint, 20 MHz bandwidth, rail-to-rail operation, and low operating current are priorities. Place input and output components close to the device, maintain the recommended supply range, and verify stability with the actual source impedance and load capacitance. This page combines manufacturer-family information, verified distributor identification, package details, application guidance, and practical design considerations for faster component selection.

Alternatives de remplacement direct pour MCP621-E/SN — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec MCP621-E/SN (même facteur de forme et même empreinte) — différant par Gain-Bandwidth Product, Offset Calibration, Product Type.

Microchip Technology
Gain-Bandwidth Product: 50 MHz
Offset Calibration: mCal automatic power-up calibration
Product Type: Standard general-purpose amplifier

MCP651-E/SN

✅ Remplacement direct
Microchip Technology
📦 8-pin SOIC
Single operational amplifier · 1 circuit · 50 MHz · 150 µV · 1.8 V · Rail-to-rail · Rail-to-rail · mCal automatic power-up calibration

Contactez-nous pour le prix

Voir la fiche technique →

MCP621-E/SN Valeurs maximales et caractéristiques électriques

Product Type Operational Amplifier
Number of Amplifiers 1 circuit
Gain-Bandwidth Product 20 MHz
Operating Current 2.5 mA
Input Type Rail-to-rail
Type de sortie Rail-to-rail
Offset Calibration Power-up self-calibration using mCal
Boîtier 8-pin SOIC
Type de montage Surface mount
Product Classification Standard general-purpose amplifier

Configuration des broches de MCP621-E/SN

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Broche 1 NC — Not connected
Broche 2 -IN — Inverting input
Broche 3 +IN — Non-inverting input
Broche 4 V- — Negative supply
Broche 5 +IN — Non-inverting input
Broche 6 OUT — Output
Broche 7 V+ — Positive supply
Broche 8 NC — Not connected

Applications typiques

MCP621-E/SN convient pour 6 applications: Portable Sensor Signal Conditioning, Battery-Powered Instrumentation, Audio Preamplification, Current-Sense Amplification, Industrial Control Interfaces, Test and Measurement Front Ends.

🧩

Portable Sensor Signal Conditioning

The MCP621-E/SN fits portable sensor-conditioning paths where a 2.5 mA operating current and rail-to-rail input and output operation help preserve useful signal range in a low-voltage system. Its 20 MHz gain-bandwidth product permits higher closed-loop bandwidth than a slow precision-only amplifier, while mCal reduces startup offset effects in feedback networks. Place the amplifier near the sensor interface, use short guarded traces for high-impedance inputs, and select resistor values that avoid excessive Johnson noise. The design should also verify the sensor output range, amplifier supply limits, input bias current, and the permitted capacitive loading before production release.

📱

Battery-Powered Instrumentation

In battery-powered instrumentation, MCP621-E/SN combines a 20 MHz gain-bandwidth product with a 2.5 mA operating current to support responsive measurement channels without using a high-power amplifier. Rail-to-rail inputs are useful when a sensor approaches either supply rail, and rail-to-rail output behavior can increase usable signal span in compact systems. The mCal startup routine reduces offset contribution in precision stages, although the system must still account for bias current, noise, and resistor tolerances. A low-noise regulator and local supply decoupling should be placed close to the amplifier.

🎧

Audio Preamplification

The MCP621-E/SN can serve as a general-purpose audio preamplifier when the design requires more bandwidth than a basic low-speed op amp. Its 20 MHz gain-bandwidth product supports a wide range of audio-band closed-loop gains, while the 2.5 mA operating current is suitable for compact, low-power audio products. Rail-to-rail input and output capability helps operate near the available supply range. The circuit must still be checked for output swing, distortion, noise, and stability. For microphone stages, use a low-noise, low-impedance source and appropriate input-biasing resistors to minimize bias-current error.

⚡

Current-Sense Amplification

MCP621-E/SN is appropriate for amplifying the small differential voltage generated by a shunt in many low-voltage current-measurement circuits. The mCal startup behavior helps reduce input offset, which is important because offset appears directly as measurement error in the amplified shunt voltage. The 2.5 mA operating current is useful in portable meters, while the 20 MHz gain-bandwidth product can preserve fast transient response. Select a shunt resistance that keeps the differential signal within the input range, account for input bias current in high-impedance reference arrangements, and avoid allowing common-mode voltage to exceed the amplifier's permitted range.

🏭

Industrial Control Interfaces

The MCP621-E/SN can amplify and buffer low-level control signals in industrial interface modules that require a compact SOIC footprint and moderate bandwidth. Its rail-to-rail inputs and outputs improve signal utilization across low-voltage control rails, and its 2.5 mA operating current reduces the load on the supply. The 20 MHz bandwidth is more than adequate for many slow analog control loops but also supports faster feedback paths. Engineers should verify operating temperature, supply tolerance, noise, and electromagnetic-interference layout against the equipment requirements before using the device in a finished industrial system.

🖥️

Test and Measurement Front Ends

MCP621-E/SN is useful as an input buffer or general gain stage in compact test and measurement equipment. The 20 MHz gain-bandwidth product supports faster signal acquisition than low-bandwidth general-purpose amplifiers, while the mCal startup routine improves initial offset performance. Rail-to-rail operation is valuable when measurements approach the supply rails. For best results, use a stable reference, low-tolerance feedback resistors, short input paths, and careful grounding around the amplifier. Confirm the source impedance, output load, noise contribution, and settling requirements before assigning the device to a high-accuracy measurement channel.

Récapitulatif des produits recommandés

MCP621 Manufacturer product family Utilisé dans : Portable Sensor Signal Conditioning, Battery-Powered Instrumentation, Audio Preamplification, Current-Sense Amplification, Industrial Control Interfaces, Test and Measurement Front Ends
What are the key specifications of MCP621-E/SN that engineers should know?
The MCP621-E/SN is a single 8-pin SOIC operational amplifier with a 20 MHz gain-bandwidth product, 2.5 mA operating current, and rail-to-rail input and output capability. It also performs power-up offset self-calibration through Microchip's mCal technology. According to the Microchip MCP621 product page, the MCP62x family is designed for low offset and general-purpose precision applications. These characteristics position the device for low-voltage sensor interfaces, portable measurement systems, buffered analog inputs, and signal-conditioning circuits.
Where can I download the MCP621-E/SN datasheet PDF?
The MCP621-E/SN datasheet is available through the official Microchip MCP621 product page at https://www.microchip.com/en-us/product/MCP621. The manufacturer documentation identifies the device as a 20 MHz, 2.5 mA operational amplifier with mCal. Use the manufacturer's pin-description table, electrical-characteristics table, and typical application circuits when assigning PCB pins or designing feedback networks. The SN ordering code corresponds to the 8-pin SOIC package identified in distributor listings.
Where can I find the MCP621-E/SN pinout?
The MCP621-E/SN uses an 8-pin SOIC package, and its pin assignments are defined in the manufacturer MCP621 datasheet. The standard single-amplifier connections are V+ at pin 7, V− at pin 4, the non-inverting input at pin 5, the inverting input at pin 2, and the output at pin 6. Pins 1 and 8 are listed as NC for this 8-pin arrangement. Confirm every connection against the package drawing before routing a PCB because special calibration or chip-select functions can change assignments in other MCP62x package options.
What does mCal do in the MCP621-E/SN?
The mCal function in the MCP621-E/SN performs an internal offset calibration at power-up, helping reduce input offset voltage in the MCP62x family. Microchip describes this behavior as self-calibration at power-up. The process reduces sensitivity to offset-induced error in precision feedback and sensing circuits without an external trimmer. It does not remove all analog error sources, so input bias current, resistor tolerance, noise, common-mode performance, and output limitations still require consideration in the system design.
Where can I buy MCP621-E/SN online and what is the current price?
The MCP621-E/SN can be requested through XAIPART's Request a Quote form on this page, where the exact quantity, package form, and current availability can be addressed. The structured price evidence for this exact MPN does not include a qualifying quantity-break table, so no static price is published in this record. Request a Quote allows the buyer to confirm commercial terms without relying on a stale marketplace listing.
What is the lead time for MCP621-E/SN?
The current lead time for MCP621-E/SN should be confirmed through the Request a Quote form on this page. The available distributor result identifies the exact 8-pin SOIC device, but it does not state a production lead time or minimum order quantity for this record. When requesting a quote, specify the required quantity, reel or tube preference, target date, and whether the shipment will be scheduled in one release or multiple releases.
Is MCP621-E/SN in stock?
Current MCP621-E/SN stock should be confirmed through the Request a Quote form on this page. The verified product listing identifies the exact Microchip MPN as an 8-SOIC, single-circuit, rail-to-rail amplifier, but the record does not contain a stock quantity that can be represented as an exact availability figure. Requesting a quote with your required quantity and packaging preference allows XAIPART to check the current channel position for that request.
What can replace MCP621-E/SN?
A valid MCP621-E/SN replacement must use the same 8-pin SOIC footprint, remain pin-to-pin compatible, and satisfy the required bandwidth, offset, supply, input/output range, and current limits. MCP621T-E/MNY is a related MCP621-family device, but its MNY package is not the same SOIC footprint as the SN device and therefore is not a drop-in replacement. The MCP621-E/SN should be replaced only after confirming the exact package drawing, pin functions, electrical limits, and calibration behavior of the candidate.
Is MCP621-E/SN the same as MCP651-E/SN?
No. MCP621-E/SN and MCP651-E/SN are different Microchip amplifier families, so they must not be treated as identical parts without a detailed comparison. The verified comparison identifies MCP651-E/SN as a rail-to-rail single amplifier in the MCP651 family, while MCP621-E/SN is an MCP621-family device with a 20 MHz, 2.5 mA specification. Check the exact SOIC pinout, offset, bandwidth, supply range, noise, bias current, and calibration behavior before considering a substitution.
MCP621-E/SN vs MCP621T-E/MNY: which is better for an SOIC PCB?
MCP621-E/SN is the appropriate choice for an existing 8-pin SOIC PCB because the SN package is identified in the distributor listing. MCP621T-E/MNY is a different package option in the related MCP621 family and therefore cannot be soldered directly into the same SOIC footprint. Its distinct package may provide different thermal, layout, or low-power functionality, but changing to it would require a PCB and assembly redesign rather than a drop-in substitution.
What is the difference between MCP621-E/SN and MCP622-E/SN?
MCP621-E/SN and MCP622-E/SN are distinct single-amplifier orderable devices within the broader MCP62x family. The exact MCP622-E/SN package and electrical characteristics must be confirmed before treating it as a replacement for MCP621-E/SN. A valid drop-in decision requires the same package, identical pin functions, compatible supply voltage, comparable rail-to-rail behavior, and electrical performance close enough for the intended gain, bandwidth, offset, and current conditions.
When should I choose MCP621-E/SN over another single op amp?
Choose MCP621-E/SN when a design needs a single 8-pin SOIC amplifier with a 20 MHz gain-bandwidth product, 2.5 mA operating current, rail-to-rail inputs and outputs, and power-up offset self-calibration. These attributes fit portable sensor conditioning and general-purpose precision signal paths. Choose another amplifier instead when its lower noise, lower offset, wider supply range, greater output current, higher slew rate, or AEC-Q100 qualification better matches the application's requirements.
Is MCP621-E/SN suitable for battery-powered sensor conditioning?
Yes, MCP621-E/SN is suitable for many battery-powered sensor-conditioning designs because its specified operating current is 2.5 mA and its inputs and outputs support rail-to-rail operation. The 20 MHz gain-bandwidth product also provides more closed-loop bandwidth than many low-power general-purpose amplifiers. Battery suitability still depends on total system current, sensor drive requirements, leakage, regulator efficiency, and whether the selected operating mode keeps the amplifier within its stated electrical limits.
How should I design around the MCP621-E/SN for stable low-noise operation?
Use short, direct signal paths and place feedback resistors close to the amplifier pins to minimize parasitic capacitance and interference. Select resistor values that balance noise against feedback impedance, and confirm stability using the amplifier's gain and phase behavior with the intended source and load. A decoupling capacitor should be placed near the supply pins, while the analog ground return should follow a low-impedance path. Add an output isolation resistor when driving potentially capacitive loads.
What does the 20 MHz gain-bandwidth product mean for MCP621-E/SN designs?
The 20 MHz gain-bandwidth product means that MCP621-E/SN can theoretically approach 20 MHz closed-loop bandwidth at a gain of 1 before practical bandwidth and phase limitations reduce the usable range. In a noise-gain or inverting configuration, the usable bandwidth is lower because the closed-loop gain and feedback topology determine the response. Actual system performance also depends on slew rate, output loading, supply voltage, source impedance, and the stability behavior specified in the manufacturer datasheet.

Données de référence d'ingénierie pour MCP621-E/SN — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose MCP621-E/SN for a new low-voltage, general-purpose analog design that requires a single amplifier, 20 MHz gain-bandwidth product, 2.5 mA operating current, rail-to-rail inputs and outputs, and power-up offset self-calibration in an 8-pin SOIC package. It is especially attractive for portable sensor conditioning, current sensing, audio preamplification, and compact instrumentation. MCP651-E/SN may be considered when its exact offset, bandwidth, current, noise, and calibration characteristics provide a closer fit, but those parameters must be verified before substitution. MCP621T-E/MNY is a package alternative rather than a drop-in replacement for an SOIC PCB. Do not select any candidate solely from rail-to-rail labeling; compare supply range, common-mode limits, output swing, slew rate, bias current, noise, stability with capacitive loads, and automotive qualification requirements.

Comparaison avec les alternatives

Paramètre Ce produit MCP651-E/SN
Brand Microchip Technology Microchip Technology
Package 8-pin SOIC 8-pin SOIC
Number of Amplifiers 1 circuit 1 circuit
Input Range Rail-to-rail Rail-to-rail
Output Range Rail-to-rail Rail-to-rail

Principaux différenciateurs

  • Higher specified bandwidth for the compared MCP621 family option (vs MCP621T-E/MNY)
  • Power-up offset self-calibration in the MCP62x architecture (vs MCP651-E/SN)
  • Low 2.5 mA operating-current specification (vs MCP651-E/SN)

Notes de conception

Place the MCP621-E/SN input, feedback, and decoupling components close to the device. Connect the supply bypass capacitor directly between the V+ and V− pins with a short ground return. For high-impedance sources, keep the non-inverting input trace short, avoid parallel copper underneath it, and use a driven guard where practical. Feedback resistors should also be located near the amplifier to minimize parasitic capacitance and feedback-loop area.

Do not substitute MCP621T-E/MNY or another package option without redesigning the PCB. The MNY suffix identifies a different package from the SN 8-pin SOIC arrangement. Verify the manufacturer pin-description table, package drawing, supply limits, and common-mode range for every proposed replacement. Also confirm that the power-up mCal behavior and any chip-select or calibration functions in the alternate package do not change the board-level control logic.

When driving a capacitive or long cable load, use an isolation resistor between the MCP621-E/SN output and the load. Begin with the manufacturer's stability guidance, then validate the final circuit with the actual source impedance, cable capacitance, and supply configuration. Keep high-speed output traces short, maintain a continuous ground reference, and avoid routing sensitive input nets beside the output to reduce capacitive feedback and electromagnetic pickup.

The 2.5 mA operating-current specification describes the amplifier, not the complete circuit. Include feedback-divider current, sensor current, reference current, regulator quiescent current, and output-load current when calculating battery life. Confirm that the supply remains within the device's permitted range at startup and during transients, and account for the power-up calibration interval when sequencing sensitive downstream circuitry.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

Compliance declarations are not stated on the manufacturer product page snippet or distributor records used for this part. Confirm the current material declaration, environmental compliance status, and qualification grade with Microchip before production release.

Données vérifiées le : 2026-11-10 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

MCP621-E/SN MCP621 datasheet MCP621-E/SN datasheet MCP621-E/SN datasheet pdf MCP621-E/SN pinout MCP621-E/SN specifications MCP621-E/SN 20MHz amplifier MCP621-E/SN SOIC package MCP621-E/SN equivalent MCP621-E/SN replacement MCP621-E/SN vs MCP651-E/SN MCP621-E/SN price MCP621-E/SN stock Microchip MCP621-E/SN

Composants & termes associés

Microchip Technology MCP621-E/SN MCP621 MCP651-E/SN MCP621T-E/MNY MCP62x family operational amplifier op amp analog amplifier signal-conditioning IC semiconductor 20 MHz gain-bandwidth product 2.5 mA operating current rail-to-rail input rail-to-rail output mCal power-up self-calibration input offset voltage closed-loop bandwidth 8-pin SOIC SOIC family surface-mount package SMD battery-powered instrumentation sensor signal conditioning
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ