MCP651-E/SN - 50MHz Rail-to-Rail Op Amp | Microchip
Référence : MCP651-E/SN ✓ ActifMCP651-E/SN Présentation
An operational amplifier is an analog integrated circuit that uses external feedback to amplify the difference between two input voltages. The MCP651 belongs to the operational-amplifier hierarchy, which includes rail-to-rail amplifiers, general-purpose amplifiers, instrumentation amplifiers, and other analog signal-conditioning ICs. Its rail-to-rail input and output behavior increases usable signal range in low-voltage systems where the output must approach the supply rails.
Key characteristics include a 50 MHz gain-bandwidth product, operation down to 1.8 V, and mCal self-calibration at power-up. The mCal function is intended to reduce input offset voltage and improve precision without requiring a manual trim procedure. Rail-to-rail inputs support sensing signals near either supply rail, while the single-amplifier configuration reduces board area in designs that need only one high-speed amplifier.
The MCP65x family is manufactured using Microchip CMOS technology and is built for low-cost, low-power, high-precision signal conditioning. At power-up, the amplifier performs its offset calibration, making it useful where fixed offset error would otherwise degrade measurement accuracy. The operating range and low-voltage capability are particularly valuable for battery-powered instruments, portable sensors, and mixed-signal systems operating from compact supply rails.
Typical applications include sensor-signal conditioning, low-level instrumentation, active filtering, audio and communication interfaces, portable measurement equipment, and general-purpose analog buffers. The 50 MHz bandwidth can support signal paths above audio frequency when required, although stability, output drive, and noise characteristics must be evaluated for the specific gain and load configuration.
For PCB design, route the input and feedback paths compactly, maintain short ground returns, and decouple the supply pins close to the device. Because the amplifier includes automatic calibration, allow the circuit to operate from a stable supply during startup and verify system behavior across the intended temperature range. Do not assume that rail-to-rail operation eliminates all headroom or output-current restrictions; consult the manufacturer datasheet for the complete electrical limits and typical curves.
This page combines the manufacturer electrical description, package information, pin assignment, drop-in alternatives, application guidance, and design-focused comparison points for engineers evaluating MCP651-E/SN in precision analog signal paths.
Alternatives de remplacement direct pour MCP651-E/SN — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MCP651-E/SN (même facteur de forme et même empreinte) — différant par Gain-Bandwidth Product, Package, Common-Mode Rejection Ratio, Input Bias Current, Number of Amplifiers.
MCP651T-E/SN
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MCP652-E/SN
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →MCP653-E/SN
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MCP654-E/SN
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MCP655-E/SN
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MCP661-E/SN
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →MCP651-E/SN Valeurs maximales et caractéristiques électriques
| Amplifier Type | Single operational amplifier |
| Number of Circuits | 1 circuit |
| Gain-Bandwidth Product | 50 MHz |
| Input Offset Voltage | 150 µV |
| Minimum Supply Voltage | 1.8 V |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Offset Calibration | mCal automatic power-up calibration |
| Process Technology | CMOS |
| Courant d'alimentation | 6 mA |
| Boîtier | 8-pin SOIC |
| Nombre de broches | 8 pins |
| Type de montage | Surface mount |
| Product Type | Standard general-purpose amplifier |
| Qualification Temperature Grade | -40°C to +125°C |
Configuration des broches de MCP651-E/SN
| Broche 1 | NC — Not connected |
| Broche 2 | IN- — Inverting input |
| Broche 3 | IN+ — Non-inverting input |
| Broche 4 | V- — Negative power supply |
| Broche 5 | NC — Not connected |
| Broche 6 | OUT — Amplifier output |
| Broche 7 | V+ — Positive power supply |
| Broche 8 | NC — Not connected |
Applications typiques
MCP651-E/SN convient pour 6 applications: Low-Voltage Sensor Signal Conditioning, Portable Measurement Instrumentation, Active Filtering and Signal Conditioning, Battery-Powered Analog Interfaces, Audio and Communication Buffering, Precision Analog Signal Conditioning.
Low-Voltage Sensor Signal Conditioning
MCP651-E/SN fits low-voltage sensor front ends because its rail-to-rail input and output operation preserves signal range from a 1.8 V supply. The 150 µV low-offset specification and mCal startup calibration improve DC accuracy when the source impedance and signal bandwidth allow those benefits to dominate. A practical implementation places the sensor near the amplifier inputs, keeps the feedback network compact, and follows the sensor interface with a low-pass filter. The 50 MHz gain-bandwidth product leaves bandwidth above the sensor signal range, while rail-to-rail output simplifies connection to a low-voltage ADC or comparator. Verify input bias current, noise, settling time, and capacitive loading before fixing the gain and filter values.
Recommandé
Portable Measurement Instrumentation
The MCP651-E/SN is appropriate for compact measurement instruments that operate from low-voltage rails. Operation down to 1.8 V reduces the need for a higher-voltage analog supply, while mCal performs offset calibration at power-up and supports repeatable DC measurements. The single-amplifier 8-pin SOIC package leaves board area for the sensor, display interface, and data-acquisition circuitry. In a typical instrument chain, the amplifier scales a transducer output before an ADC samples the result. Place the input path close to the sensor, use stable precision resistors, and evaluate offset drift over temperature rather than assuming startup calibration removes every source of error.
Recommandé
Active Filtering and Signal Conditioning
MCP651-E/SN can implement active filters and general signal-conditioning stages when the required closed-loop bandwidth remains consistent with its 50 MHz gain-bandwidth product. Rail-to-rail inputs and outputs make the amplifier useful for filters centered on mid-supply signals or operating near a rail in a compact 1.8 V system. Build the filter from precision resistors and capacitors, and keep feedback loops physically small to reduce parasitic coupling. Gain, noise, and phase margin must be checked together because the gain-bandwidth value is not a guarantee that every filter topology will remain stable with the selected tolerance and load.
Recommandé
Battery-Powered Analog Interfaces
MCP651-E/SN is suited to battery-powered analog interfaces because its minimum supply voltage is 1.8 V and its input and output can operate rail-to-rail. These characteristics help a designer use more of the available supply range rather than restricting signals to a narrow central region. The amplifier can buffer a sensor, level-shift a logic-domain reference, or provide gain ahead of an ADC. Power-budget decisions should still account for the specified 6 mA supply-current class, mCal startup behavior, and leakage into the source network. Use local supply decoupling and verify that shutdown sequencing does not create an input overvoltage outside the manufacturer's absolute maximum ratings.
Recommandé
Audio and Communication Buffering
MCP651-E/SN can buffer higher-bandwidth analog signals in audio and communication equipment. Its 50 MHz gain-bandwidth product provides substantially more bandwidth than a typical low-frequency precision amplifier, while rail-to-rail input and output behavior supports operation from a compact supply. Place the amplifier where it can drive the intended load without long traces, and use a feedback topology appropriate for the required gain and bandwidth. Output-drive, output-noise, distortion, and capacitive-load limits must be taken from the manufacturer data sheet; these characteristics are not established solely by the 50 MHz headline bandwidth.
Recommandé
Precision Analog Signal Conditioning
MCP651-E/SN provides a combination of low offset, automatic calibration, and 50 MHz bandwidth for precision signal-conditioning designs where DC accuracy and moderate bandwidth matter in the same stage. mCal calibrates the amplifier at power-up, reducing the influence of initial input offset. A practical circuit places the amplifier close to the precision feedback resistors and the analog source, while a nearby bypass capacitor provides a low-impedance supply reference. Confirm the offset-error distribution, calibration time, input bias current, and temperature drift against the system error budget before using the device as the final precision amplifier in a high-gain chain.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MCP651-E/SN — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MCP651T-E/SN | MCP652-E/SN | MCP653-E/SN | MCP654-E/SN | MCP655-E/SN |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-SOIC | 8-SOIC - same | 8-SOIC - same | 8-SOIC - same | 8-SOIC - same | 8-SOIC - same |
| Amplifier Count | 1 circuit | 1 circuit | 1 circuit | 1 circuit | 1 circuit | 1 circuit |
| Minimum Supply Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Input Common-Mode Range | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Output Swing | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Offset Calibration | mCal automatic power-up calibration | MCP65x-family power-up calibration feature | MCP65x-family power-up calibration feature | MCP65x-family power-up calibration feature | MCP65x-family power-up calibration feature | MCP65x-family power-up calibration feature |
| Process Technology | CMOS | CMOS | CMOS | CMOS | CMOS | CMOS |
| Special Features | Standard general-purpose amplifier | MCP651-family general-purpose amplifier | MCP652-family function | MCP653-family function | MCP654-family function | MCP655-family function |
Principaux différenciateurs
- Combines 50 MHz bandwidth with automatic power-up offset calibration (vs MCP661-E/SN)
- Supports operation from a 1.8 V supply with rail-to-rail signal range (vs MCP652-E/SN)
- Provides a standard single-amplifier 8-SOIC implementation (vs MCP655-E/SN)
Notes de conception
Keep the op-amp input pins and feedback components away from switching nodes, high-current traces, and the supply-return path. Place the input and feedback components close to pins 2, 3, and 6, and use a continuous ground plane where practical. For a single-supply circuit, connect V+ and V- to their respective bypass capacitors and return them directly to the ground plane. This reduces parasitic pickup and helps the amplifier retain the benefit of its 50 MHz bandwidth.
Use the 1.8 V minimum operating capability as the lower design boundary, not as a target for new designs. Provide normal supply margin above 1.8 V because the exact allowed range, startup behavior, and absolute maximum limits must be confirmed in the manufacturer data sheet. Place the supply bypass capacitor close to the device and keep its ground connection short. Treat mCal as a startup event and avoid switching the supply repeatedly without reviewing the resulting system behavior.
Do not assume that rail-to-rail input and output operation permits operation beyond the supply rails or eliminates output headroom. Check output-current capability, output-voltage limits at the selected load, input common-mode limits, and stability with the selected feedback network. A 50 MHz gain-bandwidth product does not guarantee 50 MHz usable closed-loop bandwidth at every gain. Confirm the exact MCP651-E/SN ordering suffix and pin description against the manufacturer data sheet before releasing a PCB.
Informations de conformité
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified. Confirm the current compliance and qualification information with the manufacturer before using the device in regulated production.