MMA3204EGR2 - ±112.5g/±33.75g Dual-Axis Accelerometer | NXP
Référence : MMA3204EGR2 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $12.5 | $12,50 |
| 10 | $11.2 | $112,00 |
| 100 | $9.85 | $985,00 |
| 500 | $8.5 | $4 250,00 |
| 1 000 | $7.25 | $7 250,00 |
MMA3204EGR2 Présentation
An accelerometer is a MEMS (micro-electromechanical systems) sensor that converts mechanical acceleration into an analog voltage proportional to the applied g-force. The MMA3204EGR2 belongs to the surface-micromachined capacitive sensor family, hierarchically classified as accelerometer -> motion sensor -> inertial sensor -> MEMS -> sensor IC. It integrates mechanical structure, analog front-end, filtering, and self-test functions in one package, simplifying system design compared to discrete piezoelectric or piezoresistive alternatives.
Key differentiating specifications include the dual-range design (high-g X, low-g Y in the same IC), dedicated per-axis outputs, a 4-pole low-pass filter for noise suppression, and integrated temperature compensation that stabilizes zero-g offset and sensitivity across the operating range. The two separate outputs also let designers route each axis through different gain stages downstream.
The MMA3204EGR2 uses a silicon capacitive sense element whose proof-mass movement modulates a differential capacitor bridge read out by on-chip CMOS signal conditioning. This architecture delivers low noise, low power, and good DC response, while the factory-calibrated zero-g offset and sensitivity reduce the need for end-of-line calibration. The exposed SOIC pad also aids thermal dissipation during sustained high-g events.
Typical applications include automotive airbag crash sensing, electronic stability control, industrial vibration monitoring, and tilt/inclination measurement where two axes are measured simultaneously. The wide ±112.5g X-axis range makes the device particularly suited for harsh shock environments.
When designing with this part, place 0.1 uF decoupling capacitors close to the supply pins and follow the SOIC-20 land pattern recommended by NXP. Verify that the bandwidth setting of the on-chip filter matches the application's highest frequency of interest to avoid aliasing or loss of useful spectral content.
This page consolidates verified distributor pricing, drop-in alternatives, and practical design guidance for engineers evaluating or sourcing the MMA3204EGR2.
Alternatives de remplacement direct pour MMA3204EGR2 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MMA3204EGR2 (même facteur de forme et même empreinte) — différant par Bandwidth, Output Type, Package, RoHS Status.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MMA3204EG
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MMA3201EGR2
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MMA2202EGR2
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MMA3204EGR2
✅ Remplacement direct✓ En stock
$7.25 / unité
Voir la fiche technique →MMA3204EGR2
✅ Remplacement direct✓ En stock
$7.25 / unité
Voir la fiche technique →MMA3204EGR2 Valeurs maximales et caractéristiques électriques
| Type de capteur | Accelerometer, Dual-Axis (X, Y) |
| Sensor Technology | Capacitive MEMS (silicon micromachined) |
| X-Axis Acceleration Range | ±112.5 g |
| Y-Axis Acceleration Range | ±33.75 g |
| Bandwidth | 400 Hz |
| Filter | 4-pole low-pass filter (on-chip) |
| Temperature Compensation | Integrated on-chip |
| Type de sortie | Analog, separate per-axis output |
| Axis Count | 2 (X, Y) |
| Boîtier | 20-SOIC (surface mount) |
| Type de montage | Surface Mount |
| Plage de température de fonctionnement | -40 C to +125 C |
| Signal Conditioning | Integrated on-chip |
| Lead Free Status | Lead Free |
| Statut RoHS | RoHS Compliant |
Configuration des broches de MMA3204EGR2
| Broche 1 | VDD — Positive supply voltage |
| Broche 2 | GND — Ground |
| Broche 3 | X_OUT — X-axis analog output |
| Broche 4 | Y_OUT — Y-axis analog output |
| Broche 5 | ST_X — X-axis self-test input |
| Broche 6 | ST_Y — Y-axis self-test input |
| Broche 7 | NC — Not connected |
| Broche 8 | FILT_X — X-axis filter capacitor node |
| Broche 9 | FILT_Y — Y-axis filter capacitor node |
| Broche 10 | GND — Ground |
| Broche 11 | NC — Not connected |
| Broche 12 | NC — Not connected |
| Broche 13 | NC — Not connected |
| Broche 14 | NC — Not connected |
| Broche 15 | NC — Not connected |
| Broche 16 | NC — Not connected |
| Broche 17 | NC — Not connected |
| Broche 18 | NC — Not connected |
| Broche 19 | GND — Ground |
| Broche 20 | VDD — Positive supply voltage |
Applications typiques
MMA3204EGR2 convient pour 6 applications: Automotive Airbag Crash Sensing, Electronic Stability Control (ESC), Industrial Vibration Monitoring, Tilt and Inclination Measurement, Rugged Portable Equipment, Platform Stabilization and Gimbals.
Automotive Airbag Crash Sensing
The MMA3204EGR2's wide ±112.5 g X-axis range and integrated 4-pole low-pass filter make it well-suited for automotive airbag crash-sensing modules where frontal and lateral deceleration events must be detected reliably. The X-axis captures the high-g crash pulse typical of a frontal collision, while the Y-axis at ±33.75 g handles lower-g tilt and rollover pre-cues. The on-chip temperature compensation keeps zero-g offset stable across the -40 C to +125 C automotive under-hood environment, reducing end-of-line calibration cost. Each axis has a dedicated analog output so the airbag controller can digitize the two channels with separate gain paths optimized for each range, simplifying algorithm tuning.
Recommandé
Electronic Stability Control (ESC)
The MMA3204EGR2 suits electronic stability control modules that need to measure chassis lateral and longitudinal acceleration simultaneously. The ±112.5 g X-axis provides headroom for transient high-g cornering events, while the ±33.75 g Y-axis delivers the resolution needed to detect slow vehicle dynamics and tilt. The 400 Hz bandwidth is sufficient for chassis dynamics control loops, and the on-chip filter helps reject high-frequency road noise before it reaches the ESC controller's ADC. The SOIC-20 package is rugged enough for the underbody mounting typically required in ESC systems.
Recommandé
Industrial Vibration Monitoring
For industrial vibration monitoring of rotating machinery, the MMA3204EGR2 provides two measurement ranges in a single sensor, allowing one axis to track broadband vibration while the other tracks lower-amplitude tilt or settling drift. The on-chip 4-pole low-pass filter at 400 Hz is well-matched to the spectral content of most rotating-equipment vibration signatures, simplifying anti-aliasing design. The -40 C to +125 C operating range covers factory-floor environments, and the SOIC-20 surface-mount package supports automated assembly for high-volume condition-monitoring modules.
Recommandé
Tilt and Inclination Measurement
The MMA3204EGR2's lower-g ±33.75 g Y-axis is appropriate for tilt and inclination measurement in industrial and platform-leveling applications, where the static 1 g gravity vector must be resolved with good sensitivity. The integrated temperature compensation keeps the zero-g offset stable across the operating range, which is critical for long-term tilt accuracy in outdoor or unconditioned enclosures. The SOIC-20 footprint and dual-axis output make board layout compact, and the dedicated per-axis outputs allow different gain stages to be applied to the tilt channel versus a higher-g dynamic channel.
Recommandé
Rugged Portable Equipment
The MMA3204EGR2 is suited for rugged portable equipment such as handheld industrial tools, sports performance trackers, and outdoor data loggers where the device may be subjected to both high-shock drop events and lower-g motion tracking. The wide X-axis range tolerates drop shock on the order of 100 g, while the Y-axis captures everyday motion. The wide -40 C to +125 C operating range and SOIC-20 surface-mount package suit harsh-environment handheld enclosures, and the on-chip filter reduces the burden on the host processor's signal-processing pipeline.
Recommandé
Platform Stabilization and Gimbals
Camera gimbal and platform stabilization systems benefit from the MMA3204EGR2's dual-range design: the wider X-axis range can absorb fast maneuvering accelerations while the more sensitive Y-axis delivers the fine resolution required for closed-loop stabilization feedback. The 400 Hz bandwidth is sufficient for many gimbal control loops, and the analog per-axis outputs allow direct connection to a DSP or microcontroller ADC without requiring a digital interface. The SOIC-20 package is compact enough for small stabilized mounts used in drones and handheld cameras.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MMA3204EGR2 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MMA3204EG | MMA3201EGR2 | MMA2202EGR2 | MMA3204EGR2 (Freescale) | MMA3204EGR2 (Rochester) |
|---|---|---|---|---|---|---|
| Package | 20-SOIC | 20-SOIC - same | 20-SOIC - same | 20-SOIC - same | 20-SOIC - same | 20-SOIC - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | Freescale Semiconductor | Rochester Electronics |
| Axis Count | 2 (X, Y) | 2 (X, Y) | 1 (X) | 1 (X) | 2 (X, Y) | 2 (X, Y) |
| X-Axis Range | ±112.5 g | ±112.5 g | ±100 g | ±50 g | ±112.5 g | ±112.5 g |
| Y-Axis Range | ±33.75 g | ±33.75 g | N/A (single axis) | N/A (single axis) | ±33.75 g | ±33.75 g |
| Filter | 4-pole low-pass (on-chip) | 4-pole low-pass (on-chip) | On-chip filter | On-chip filter | 4-pole low-pass (on-chip) | 4-pole low-pass (on-chip) |
| RoHS / Lead Free | RoHS Compliant / Lead Free | RoHS Compliant / Lead Free | RoHS Compliant | RoHS Compliant | RoHS Compliant / Lead Free | RoHS Compliant / Lead Free |
| Operating Temperature | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C |
Principaux différenciateurs
- Dual-range dual-axis architecture in a single IC (vs MMA3201EGR2)
- Higher X-axis full-scale range (vs MMA2202EGR2)
- On-chip 4-pole low-pass filter (vs Discrete accelerometer signal chain)
Notes de conception
Place 0.1 uF decoupling capacitors as close as possible to the VDD and GND pins of the MMA3204EGR2 to suppress supply noise that could couple into the analog X_OUT and Y_OUT signals. A bulk 1 uF to 10 uF tantalum or ceramic capacitor on the supply rail is also recommended for high-shock events where supply current spikes are largest. Keep digital logic traces away from the analog output traces to avoid coupling.
Route the X_OUT and Y_OUT analog outputs over a continuous ground plane and avoid crossing noisy digital or switching-power traces. Place a unity-gain buffer amplifier near the sensor if the ADC is more than a few centimeters away, to prevent capacitive loading from distorting the 4-pole low-pass filter response. Use guarded/shielded cabling for off-board connections.
Do not exceed the maximum supply voltage or apply reverse polarity to the MMA3204EGR2. Ensure the self-test pins (ST_X, ST_Y) are either left floating or driven according to the datasheet self-test procedure; do not tie them permanently high or low, as this can cause unwanted deflection of the sense element. The filter capacitor values on the FILT_X and FILT_Y pins set the bandwidth and must match the application requirements.
Orient the MMA3204EGR2 SOIC-20 package so that its sensing axes align with the application's intended measurement directions, and mechanically isolate the device from PCB strain sources (connectors, mounting screws, large components) that can couple stress into the MEMS element and appear as offset drift. Use a strain-relief cutout around the sensor footprint when high mechanical stress is expected.
