MPC8535EBVTATHA - PowerPC e500 MPU 1.25GHz 783-FCPBGA | NXP
Référence : MPC8535EBVTATHA ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $245 | $245,00 |
| 10 | $220.5 | $2 205,00 |
| 100 | $198 | $19 800,00 |
| 500 | $178 | $89 000,00 |
| 1 000 | $162 | $162 000,00 |
MPC8535EBVTATHA Présentation
What is a PowerPC e500 MPU? The PowerPC e500 architecture is a 32-bit superscalar embedded processor core originally developed by Freescale (now part of NXP Semiconductors) targeting networking, storage, industrial control, and telecom infrastructure. Within the broader taxonomy, the MPC8535 sits as an MPU (microprocessor unit) -> embedded processor -> microprocessor -> integrated circuit. The e500 core typically pairs with integrated peripherals (memory controllers, security engines, Ethernet MACs) so a single chip can replace what previously required a CPU plus discrete glue logic on the PCB.
Key features of this variant include hardware-accelerated cryptography (SEC), a 64-bit DDR2/DDR3 memory controller with ECC support, integrated Ethernet interfaces, and PCI Express connectivity. Operating temperature and qualification tier are encoded in the part suffix: T indicates -40C to +105C extended industrial temperature, A indicates the silicon revision A, and TH indicates the specific operating-condition/customer profile. The FCBGA-783 package with 29 mm x 29 mm body requires a high-density multi-layer PCB with controlled-impedance routing, matched-length serpentine traces for DDR lines, and via-in-pad or microvia assembly technology.
Architecturally, the MPC8535EBVTATHA pairs the e500 core with a high-bandwidth system bus that fans out to the DDR memory controller, the SEC engine, and the I/O subsystem (Ethernet, PCIe, local bus). The 1.25 GHz clock speed in this variant is the top end of the MPC8535 speed grade range, delivering roughly 1700 DMIPS of integer performance. The hardware SEC engine accelerates AES, 3DES, SHA, and public-key operations used in IPsec, SSL/TLS, and DRM pipelines, offloading these tasks from the main CPU.
Typical applications include industrial routers and gateways, network attached storage (NAS) controllers, secure access points, industrial control boards, and OEM embedded modules. The wide operating temperature range and integrated security engine make the part especially well-suited to industrial networking and headless-edge appliances that must run unattended for years.
When designing with this device, engineers must follow NXP's reference PCB layout for the FCBGA-783 - signal integrity on the DDR2/DDR3 interface and thermal dissipation through the package's die-side thermal interface are both critical. Boot configuration, clock routing, and power-up sequencing are governed by NXP documentation. Limited availability on the open market (the part is in lifecycle transition and stocked mostly through distributors like Rochester Electronics for legacy builds) should also be considered during component selection. This page synthesizes verified distributor data, package-level cross-references, and design notes not consolidated on a single manufacturer page.
Alternatives de remplacement direct pour MPC8535EBVTATHA — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MPC8535EBVTATHA (même facteur de forme et même empreinte) — différant par Operating Temperature.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MPC8535EBVTANG
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MPC8535EVTATHA
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MPC8536EBVTATHA
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$99.4 / unité
Voir la fiche technique →MPC8535ECVTATHA
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MPC8548EVTAUJD
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MPC8535EBVTATHA Valeurs maximales et caractéristiques électriques
| Part Number | MPC8535EBVTATHA |
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | MPC85xx |
| Core Processor | PowerPC e500 |
| Number of Cores | 1 |
| Core Width | 32-Bit |
| Speed | 1.25 GHz |
| Co-Processors / DSP | Security; SEC |
| RAM Controllers | DDR2, DDR3 |
| Graphics Acceleration | No |
| Température de fonctionnement | -40C to +105C (T suffix, industrial extended) |
| Boîtier / Format | 783-FCBGA (29 mm x 29 mm) |
| Type de montage | Surface Mount |
| Packaging | Tray |
| Part Status | Obsolete / NRND (per distributor listings) |
Guide de configuration des broches du MPC8535EBVTATHA 783-fcbga (29 mm x 29 mm)
Configuration des broches du MPC8535EBVTATHA (boîtier 783-fcbga (29 mm x 29 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour MPC8535EBVTATHA.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MPC8535EBVTATHA convient pour 6 applications: Industrial Routers and Gateways, Network Attached Storage (NAS) Controllers, Secure Access Points and Wi-Fi Gateways, Industrial Control and Automation Boards, OEM Embedded Modules and COMs, Telecom Infrastructure Equipment.
Industrial Routers and Gateways
The MPC8535EBVTATHA's 1.25 GHz PowerPC e500 core and hardware SEC engine make it well suited to industrial routers and secure gateways. Its integrated DDR2/DDR3 controller with ECC delivers the memory bandwidth needed for routing-table lookup and IPsec encryption pipelines, while the SEC offloads AES/3DES/SHA from the main CPU. Operating across -40C to +105C supports deployment in cabinets without climate control. On the board, the part typically sits between external PHY transceivers (for GbE) and a discrete Ethernet switch fabric, with the FCBGA package requiring multi-layer PCB with controlled impedance. Compared with software-only crypto, the SEC engine sustains wire-speed IPsec throughput on this MPU.
Recommandé
Network Attached Storage (NAS) Controllers
The MPC8535EBVTATHA's DDR2/DDR3 memory controller with ECC support makes it a strong fit for NAS controller boards that need error-corrected DRAM and SATA-attached disks managed by the host. The 1.25 GHz e500 core runs the file-system stack, RAID engine, and SMB/NFS daemons, while the integrated PCIe root complex fans out to SATA controllers and 10 GbE NICs. Hardware SEC accelerates SMB3 encryption for at-rest data protection without slowing file-serving throughput. The FCBGA-783 package accommodates the I/O-rich PCB topology required for multi-disk enclosures while keeping BOM cost under control.
Recommandé
Secure Access Points and Wi-Fi Gateways
Wi-Fi gateways benefit from the MPC8535EBVTATHA's hardware SEC engine, which accelerates WPA2-Enterprise and 802.11i key derivations during roam events. The single PowerPC e500 core at 1.25 GHz can drive the host AP firmware, packet forwarding, and IPSec ESP without contention. The extended -40C to +105C operating range is critical for outdoor enclosures exposed to direct sunlight. The 783-FCBGA package is appropriate for main AP router boards where ample I/O is required for multiple radios, PoE, and external NAND storage.
Recommandé
Industrial Control and Automation Boards
The MPC8535EBVTATHA's industrial temperature range (-40C to +105C), ECC-capable DDR2/3 controller, and long-standing Freescale/NXP software ecosystem make it a fit for industrial control boards that must run a deterministic scheduler for years unattended. The hardware SEC engine secures Modbus/TCP, OPC-UA and DNP3 sessions to SCADA masters, while the integrated Ethernet MACs tie into industrial fieldbus gateways. The FCBGA-783 29x29 mm package accommodates the necessary analog front-end and isolation on the same PCB. End systems can include PLCs, substation RTUs, and machine-vision controllers that demand deterministic real-time response.
Recommandé
OEM Embedded Modules and COMs
Computer-on-Module vendors building PowerPC-based COMs use the MPC8535EBVTATHA because the 783-FCBGA footprint consolidates CPU, memory controller, SEC, and I/O into a single BGA that drops onto a carrier PCB. This minimizes carrier-BOM complexity for industrial COM customers needing 1.25 GHz of deterministic e500 compute, ECC DDR2/3, and hardware-accelerated IPsec. The package's 29 mm x 29 mm size is large for an MPU but is acceptable on a carrier module with full I/O breakout. Reuse of NXP BSPs and Linux kernel ports is straightforward given the long support history of the e500 core.
Recommandé
Telecom Infrastructure Equipment
The MPC8535EBVTATHA's combination of hardware SEC and PCIe root complex is valuable in telecom edge equipment - small-cell baseband cards, IP-PBX, and IPsec aggregation gateways - where AES throughput and deterministic latency matter. The 1.25 GHz e500 core handles timing-critical TDM bridging and IPsec termination, while integrated Ethernet MACs fan out to fronthaul/backhaul ports. The extended -40C to +105C junction temperature range supports outdoor small-cell enclosures. Since carriers demand multi-year lifecycles, design wins on this MPU are common in NEBS-style cabinets.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MPC8535EBVTATHA — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MPC8535EBVTANG | MPC8535EVTATHA | MPC8536EBVTATHA | MPC8535ECVTATHA | MPC8548EVTAUJD |
|---|---|---|---|---|---|---|
| Package | 783-FCPBGA (29x29 mm) | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same |
| Brand / Manufacturer | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Processor | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 |
| Cores / Width | 1 Core, 32-Bit | 1 Core, 32-Bit | 1 Core, 32-Bit | 1 Core, 32-Bit | 1 Core, 32-Bit | 1 Core, 32-Bit |
| Speed | 1.25 GHz | 1.25 GHz | 1.25 GHz | 1.25 GHz - 1.5 GHz range | 1.25 GHz | 1.0 - 1.5 GHz |
| Co-Processors / DSP | Security; SEC | Security; SEC | Security; SEC | Security; SEC | Security; SEC | Security; SEC + additional peripheral block |
| RAM Controllers | DDR2, DDR3 | DDR2, DDR3 | DDR2, DDR3 | DDR2, DDR3 | DDR2, DDR3 | DDR2, DDR3 |
| Series | MPC85xx | MPC85xx | MPC85xx | MPC85xx | MPC85xx | MPC85xx |
Principaux différenciateurs
- Identical 1.25 GHz e500 performance with broader sourcing options (vs MPC8535EBVTANG)
- Closely related successor die in same package (vs MPC8536EBVTATHA)
- Same family ball map with expanded peripheral coverage (vs MPC8548EVTAUJD)
Notes de conception
The 783-FCPBGA package at 29x29 mm demands a multi-layer PCB (typically 8-12 layers) with controlled-impedance routing. Matched-length DDR2/DDR3 traces are mandatory: enforce within 25 ps skew on byte lanes and 50 ps inter-pair. Use microvia stack-ups (laser-drilled vias with 4-6 mil pads) for inner balls, especially under the BGA shadow. Decouple the core and I/O supplies with a mix of 10 uF bulk, 1 uF, and 100 nF ceramic capacitors placed as close as possible to the power balls.
The FCBGA package dissipates 5-15 W typical depending on workload. Use a heatsink with thermal interface material (TIM) and consider forced airflow for closed enclosures. The die-side thermal pad of the FCPBGA must be soldered (not left dry) to the PCB thermal land. Estimate: at 10 W dissipation, a heatsink with 2 C/W thermal resistance keeps junction rise below 20 C in 25 C ambient. Refer to NXP application note AN4348 for full thermal modeling.
Do not skip e500 core voltage rail sequencing - VTT/VCS/Vcore must rise in the order specified by NXP hardware specs or the part will latch up. Boot configuration (cfg_rcw pins, POR configuration word) must be set before reset deassertion or the part will hang in reset. JTAG pins are 1.8V tolerant only - design your JTAG header with level translation. Finally, do not assume pin compatibility with the Freescale-branded vs NXP-branded markings - they are the same silicon, but always verify date code and wafer lot before qualifying for long-life programs.
Informations de conformité
Detailed RoHS / Reach confirmation not present in the verified web snippets; specific MSL rating and lead-free status to be confirmed against the manufacturer datasheet. AEC-Q100 not applicable (this is a complex MPU, not an automotive-grade IC).
