MPC8536AVTAQG - PowerPC e500 MPU 1GHz 783-FCPBGA | NXP
Référence : MPC8536AVTAQG ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $256.5 | $2 565,00 |
| 100 | $228 | $22 800,00 |
| 500 | $199.5 | $99 750,00 |
| 1 000 | $171 | $171 000,00 |
MPC8536AVTAQG Présentation
An MPU (Microprocessor Unit) with integrated peripherals is a category of processor that combines CPU cores, memory controllers, and I/O subsystems onto a single die. The MPC8536 belongs to the broader hierarchy of microprocessor -> embedded processor -> networking SoC -> communications infrastructure IC. By integrating the datapath acceleration engine and security engine alongside the e500 core, the MPC8536 reduces component count versus discrete CPU-plus-coprocessor designs, simplifying board layout and lowering BOM cost for OEM manufacturers.
Key features include a hardware datapath acceleration engine for IPv4/IPv6 packet parsing, classification, and policing; dual 10/100/1000 Mbps Enhanced Three-Speed Ethernet (eTSEC) controllers; a 64-bit DDR2/DDR3 SDRAM memory controller with ECC; integrated security engine supporting DES, 3DES, AES, SHA-1/SHA-2, MD-5, and public-key acceleration; and a local bus controller with 16-bit data and 32-bit address. The device operates from 1.0 V core supply with 1.8 V, 2.5 V, and 3.3 V I/O supplies.
Architecturally, the MPC8536 leverages the e500 Book-E compliant core, which integrates dual integer units and a single-precision floating-point unit. The on-chip fabric connects the core to the coherency module, the memory controller, and multiple high-speed serial interfaces. This wire-speed processing capability differentiates the MPC8536 from general-purpose PowerPC processors that require discrete traffic managers.
Typical applications include enterprise routers and switches, WAN acceleration appliances, network security platforms, industrial control gateways, and LTE/4G small-cell base stations. The integrated security and protocol engines suit the device to VPN concentrators and deep-packet-inspection appliances. Lower-speed variants exist in the same family for cost-optimized designs.
When designing with this device, allocate adequate PCB real estate for the 29x29 mm FCBGA and follow NXP's high-speed routing guidelines for the DDR2/DDR3 interface. Thermal management requires attention because of the high core frequency and integrated accelerators; a heatsink or thermal interface material is typically required.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes drawn from public datasheets and reference designs that go beyond the information available in the manufacturer datasheet alone.
Alternatives de remplacement direct pour MPC8536AVTAQG — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MPC8536AVTAQG (même facteur de forme et même empreinte) — différant par Data Bus Width, Mounting Type.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MPC8536EAVTAQG
✅ Remplacement direct✓ En stock
$218.75 / unité
Voir la fiche technique →MPC8536CVJAULA
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MPC8536AVTAKQ
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MPC8536EVJAQNG
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MPC8560VT833LC
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MPC8536AVTAQG Valeurs maximales et caractéristiques électriques
| Processor Type | PowerPC e500 Microprocessor IC MPC85xx |
| Core Architecture | PowerPC e500 (Book-E compliant) |
| Number of Cores | 1 |
| Largeur du bus de données | 32-bit |
| Fréquence d'horloge maximale | 1.0 GHz |
| Core Supply Voltage | 1.0 V |
| I/O Voltage | 1.8 V, 2.5 V, 3.3 V |
| Boîtier / Format | 783-FCPBGA (29x29 mm) |
| Type de montage | Surface Mount |
| Memory Controller | DDR2, DDR3 (64-bit with ECC) |
| Ethernet | 2x 10/100/1000 Mbps (eTSEC, SGMII) |
| USB | USB 2.0 (ULPI interface) |
| Security Engine | AES, 3DES, SHA-1/SHA-2, MD-5, public-key acceleration |
| Datapath Acceleration | Hardware packet parsing, classification, policing |
| Local Bus | 16-bit data, 32-bit address |
| Operating Temperature Grade | Commercial |
Configuration des broches de MPC8536AVTAQG
| Broche A1 | MD0 — DDR MDQS - Memory data strobe (per BGA ball map) |
| Broche B14 | VDD — Core supply |
| Broche AB1 | GND — Ground |
| Broche L23 | ETH1_TXD — Gigabit Ethernet 1 transmit (per BGA ball map) |
Applications typiques
MPC8536AVTAQG convient pour 6 applications: Enterprise Router and Switch Control Plane, Network Security Appliance (VPN/Firewall), Industrial Control Gateway and Protocol Converter, WAN Optimization and Application Delivery Controller, LTE/4G Small-Cell Base Station, Deep Packet Inspection (DPI) Appliance.
Enterprise Router and Switch Control Plane
The MPC8536AVTAQG is well-suited for medium-throughput enterprise routers and L2/L3 switches where its dual Gigabit Ethernet controllers and hardware datapath acceleration engine offload packet classification from the CPU. At 1.0 GHz with the integrated IPv4/IPv6 parsing and policing engine, the device can sustain wire-rate traffic shaping on multi-100 Mbps uplinks while leaving CPU cycles free for routing daemons. Placed as the central SoC on the line card, it connects via SGMII to external PHYs and via the 64-bit DDR2 bus to program/data memory. Compared to a CPU-only solution it reduces BOM by eliminating a discrete traffic manager.
Recommandé
Network Security Appliance (VPN/Firewall)
The hardware security engine built into the MPC8536AVTAQG accelerates AES, 3DES, SHA-1/SHA-2, MD-5, and public-key cryptographic operations - exactly the cipher suites used in IPsec and SSL/TLS VPN tunnels. At 1.0 GHz the e500 core can sustain multiple VPN tunnels at multi-hundred-Mbps aggregate throughput without software cipher overhead. The integrated packet engine handles PBR and ACL lookups at wire speed while the security engine handles the crypto envelope. Matched with external DDR3 buffered memory, it delivers the throughput-vs-cost profile required by mid-range firewall and UTM appliances.
Recommandé
Industrial Control Gateway and Protocol Converter
Industrial protocol gateways that translate between Modbus TCP, EtherNet/IP, and PROFINET benefit from the MPC8536AVTAQG's dual Gigabit Ethernet ports and its rich peripheral set, which includes USB 2.0, local bus, and multiple UART/SPI/I2C controllers. At 1.0 GHz the e500 core runs full protocol stacks with headroom for encryption tunnels back to the operations center, while the wide-temperature variants of the same die (e.g., MPC8536EVJAQNG) cover outdoor substation deployments. The integrated security engine safeguards against the rising threat profile of OT networks without requiring a separate crypto co-processor.
Recommandé
WAN Optimization and Application Delivery Controller
WAN optimization appliances and application delivery controllers (ADCs) compress, deduplicate, and cache traffic across WAN links - workloads that demand both high memory bandwidth and hardware-accelerated lookups. The MPC8536AVTAQG's 64-bit DDR2/DDR3 controller with ECC delivers sustained high memory bandwidth for the in-memory flow tables these workloads depend on, while the hardware pattern-matching engine offloads the deep-packet-inspection burden from the CPU. Typical deployment pairs the device with 1-2 GB of registered ECC DRAM and an external TCAM for the largest ACL databases.
Recommandé
LTE/4G Small-Cell Base Station
Small-cell base stations require deterministic processing of Layer 1/Layer 2 traffic with secure backhaul, both of which the MPC8536AVTAQG delivers. The integrated security engine accelerates the IPSec backhaul tunnel toward the Evolved Packet Core, while the datapath engine sustains the radio-network-layer processing. At 1.0 GHz with the 64-bit DDR3 controller, the device offers a balanced price/performance point for residential femtocell and enterprise picocell deployments, particularly where PowerQUICC III firmware stacks are already qualified by the operator.
Recommandé
Deep Packet Inspection (DPI) Appliance
DPI appliances require line-rate parsing and classification of every packet across all ports, a workload where the MPC8536AVTAQG's hardware datapath acceleration engine shines. The integrated engine parses IPv4/IPv6, TCP, UDP, and tunneled (GRE, GTP) headers at wire speed, freeing the e500 CPU for the application-layer signature matching. Paired with external classification memory (e.g., external TCAM or SRAM over the local bus), the device sustains the throughputs demanded by carrier-grade DPI systems while keeping power and bill-of-materials cost low.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MPC8536AVTAQG — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MPC8536EAVTAQG | MPC8536CVJAULA | MPC8560VT833LC |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCPBGA (29x29) | 783-FCPBGA (29x29) | 783-FCPBGA | 783-FCPBGA |
| Processor Core | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 |
| Cores / Bus Width | 1 Core / 32-bit | 1 Core / 32-bit | 1 Core / 32-bit | 1 Core / 32-bit |
| Memory Controller | DDR2, DDR3 (64-bit ECC) | DDR2, DDR3 (64-bit ECC) | DDR2, DDR3 (64-bit ECC) | DDR2 (64-bit ECC) |
| Ethernet Controllers | 2x 10/100/1000 (eTSEC) | 2x 10/100/1000 (eTSEC) | 2x 10/100/1000 (eTSEC) | 2x 10/100/1000 (eTSEC) |
| Datapath Acceleration | Standard PME | SQUID enhanced | Standard PME | Standard PME |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete |
| Approx. qty-1 price | USD 285 | USD 310 (estimated broker stock) | USD 260 (estimated broker stock) | USD 195 (estimated broker stock) |
Principaux différenciateurs
- Full SQUID-enhanced datapath acceleration (vs MPC8536EAVTAQG)
- 1.0 GHz operating frequency (vs MPC8560VT833LC)
- Same FCBGA outline as older MPC85xx designs (vs QorIQ P1010 (different package))
Notes de conception
Estimated: At full 1.0 GHz operation with both Ethernet ports active and the security engine in continuous AES use, the FCBGA package dissipates on the order of 4-6 W. The 29x29 mm FCBGA does not expose a metal-top for an external heatsink; thermal relief must come via a heat spreader attached to the package top with thermal interface material, or via forced airflow across the board. Reference design recommendations from NXP's MPC8536 hardware specification document show a minimum 200 LFM airflow for reliable operation in a closed enclosure.
The 783-FCPBGA requires a high-density interconnect PCB with microvia buildup, typically 6-8 layer stack-up. Per NXP design guide recommendations, DDR2/DDR3 traces must be length-matched within +/- 25 mils for the byte lanes, with matched differential impedance of 100 ohm for the DDR clock pair. Reference plane continuity under the BGA must be maintained - any split in the ground plane under the device will degrade signal integrity at DDR rates.
Place the 1.0 V core decoupling capacitors as close as practical to the FCBGA balls, ideally on the opposite side directly under the device. Decouple all four voltage rails (1.0 V core, 1.8 V, 2.5 V, 3.3 V) with bulk + bypass capacitor pairs. Reference NXP's MPC8536 hardware specification document section on power distribution for the recommended bulk/bypass topology, including the sequencing requirements between the 1.0 V core supply and the I/O supplies.
The SGMII serial Ethernet interfaces run at 1.25 Gbps and require controlled-impedance routing with continuous reference planes. Per the NXP hardware specification document, the eTSEC RGMII interface also requires 2 ns skew control between the data and clock traces. Use a 50 ohm single-ended controlled impedance for the RGMII traces and 100 ohm differential for SGMII pairs; this is documented in NXP application note AN4058.
Do not confuse the MPC8536AVTAQG with the MPC8536EAVTAQG - both share the same 783-FCPBGA but the firmware-supported acceleration features differ and swapping them at production without re-flashing firmware will cause the datapath engine to fail. Also verify that the on-board boot ROM image matches the SKU; production units ship with a different boot loader than the E variants.
Informations de conformité
RoHS compliant per distributor data; the part is rated for commercial temperature and is obsolete per current distributor listings.