MSP430F1481IPM - 8MHz, 48KB Flash MCU | Texas Instruments
Référence : MSP430F1481IPM ✓ ActifMSP430F1481IPM Présentation
A mixed-signal microcontroller is a semiconductor that integrates a digital processor with functions such as analog-to-digital conversion and comparators. In the MSP430 hierarchy, the device belongs to the MSP430 family of ultra-low-power 16-bit RISC microcontrollers. This family is designed around a 16-bit CPU, 16-bit registers, efficient interrupt handling, and low-power modes intended to extend battery life in portable measurement equipment.
The principal features include 48 KB Flash for firmware and constants, 2 KB SRAM for working data, an 8 MHz CPU clock, and a 12-bit ADC. The hardware multiplier improves the execution speed of multiply-intensive routines, while two USARTs and SPI support communication with sensors, displays, data converters, and external processors. A comparator enables threshold-based signal conditioning without requiring a separate comparator. The 1.8 V to 3.6 V operating range supports both low-energy and conventional 3.3 V system rails.
The MSP430 architecture emphasizes rapid interrupt servicing and deterministic control. Its five low-power modes allow firmware to stop the CPU when work is complete and restart it when an interrupt or wake-up event occurs. Standby wake-up is described as occurring in less than 1 microsecond, which is useful for short measurement cycles. RAM-retention operation consumes 0.1 microamp according to the MSP430F1481IPM datasheet excerpt, supporting systems that must preserve state while minimizing energy use.
Typical uses include battery-powered data loggers, industrial sensor interfaces, portable instrumentation, smart metering, and embedded control systems that need local analog measurement. Two USARTs allow simultaneous connection of multiple serial peripherals, while the ADC and comparator can handle analog front-end tasks directly. The LQFP-64 package also exposes substantially more I/O than a small leadless package, making external sensors, indicators, and communication interfaces easier to connect.
When designing around this device, account for analog input bandwidth, reference voltage, and ADC sampling time rather than treating the ADC as an unlimited-rate converter. Keep sensitive analog and digital return paths separated appropriately, place decoupling capacitors close to the supply pins, and use the manufacturer’s pin-description table when assigning PCB functions. Firmware should use the low-power modes only after accounting for wake-up sources, retained RAM, and required communication timing.
This page combines manufacturer specifications, sourcing guidance, drop-in replacement analysis, application context, and practical PCB advice for engineers evaluating the MSP430F1481IPM. It also distinguishes exact substitutes from broader MSP430 family members so board-level compatibility can be checked before a replacement is approved.
Alternatives de remplacement direct pour MSP430F1481IPM — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MSP430F1481IPM (même facteur de forme et même empreinte) — différant par Package, Supply Voltage Range, ADC Resolution, Comparator, Flash Memory.
MSP430F148IPM
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →MSP430F149IPM
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →MSP430F1491IPM
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →MSP430F1481IPM Valeurs maximales et caractéristiques électriques
| CPU Architecture | 16-bit RISC |
| Fréquence d'horloge maximale | 8 MHz |
| Flash Memory | 48 KB |
| SRAM | 2 KB |
| ADC Resolution | 12 bit |
| Comparator | Integrated |
| USART Count | 2 |
| SPI Interface | Integrated |
| Hardware Multiplier | Integrated 16-bit hardware multiplier |
| Supply Voltage Range | 1.8 V to 3.6 V |
| I/O Port Count | 22 |
| Power-Saving Modes | 5 modes |
| RAM-Retention Off Current | 0.1 microamp |
| Standby Wake-Up Time | Less than 1 microsecond |
| Boîtier | 64-pin LQFP (PM), 10 mm x 10 mm |
| Type de montage | Surface mount |
Guide de configuration des broches du MSP430F1481IPM 64-pin lqfp (pm), 10 mm x 10 mm
Configuration des broches du MSP430F1481IPM (boîtier 64-pin lqfp (pm), 10 mm x 10 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour MSP430F1481IPM.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MSP430F1481IPM convient pour 6 applications: Battery-Powered Data Loggers, Industrial Sensor Interfaces, Portable Measurement Instruments, Smart Metering Systems, Battery-Powered Medical Sensors, Embedded Control and Monitoring.
Battery-Powered Data Loggers
The MSP430F1481IPM fits battery-powered data loggers because its 1.8 V to 3.6 V operating range, five low-power modes, and 0.1 microamp RAM-retention off current support long idle periods between measurements. Its 48 KB Flash stores firmware and calibration data, while 2 KB SRAM handles acquisition buffers and operating state. The less-than-1-microsecond standby wake-up supports rapid response to scheduled sampling or external interrupts. Firmware should retain only essential variables, disable unused peripherals, and restore the sampling configuration immediately after wake-up.
Recommandé
Industrial Sensor Interfaces
The MSP430F1481IPM is appropriate for industrial sensor interfaces that combine analog measurement with serial connectivity. Its 12-bit ADC can digitize sensor outputs, the comparator can perform threshold detection, and two USARTs can connect remote sensors or local transceivers. The 64-pin LQFP package provides 22 I/O ports according to the manufacturer listing, leaving interface capacity beyond the analog and serial functions. Use separate analog and digital grounding strategies, validate ADC source impedance, and observe the datasheet’s recommended input and reference-capacitor arrangements.
Recommandé
Portable Measurement Instruments
The MSP430F1481IPM supports portable instruments where low energy, measurement accuracy, and compact integration are important. The 8 MHz RISC core handles control logic, the 12-bit ADC acquires process or sensor signals, and the hardware multiplier accelerates arithmetic used in calibration and signal processing. Its low-power modes allow the instrument to consume little energy between operator actions or measurement events. Place the ADC input network close to the device, provide a stable reference source, and verify acquisition timing before selecting the maximum sampling rate.
Recommandé
Smart Metering Systems
The MSP430F1481IPM can serve as the control MCU in a smart meter or remote measurement terminal. Two USARTs support serial metering peripherals and communications equipment, while SPI can connect to external nonvolatile storage or a higher-speed sensor. Flash provides 48 KB for application code and configuration, and the broad 1.8 V to 3.6 V range accommodates low-voltage front ends. Security-sensitive metering designs should add the required authentication and encryption functions, isolate communication transceivers appropriately, and confirm wake-up behavior across all operating modes.
Recommandé
Battery-Powered Medical Sensors
The MSP430F1481IPM is suitable for low-power medical sensor signal-processing modules that need local ADC measurement and flexible serial connectivity. Its 12-bit ADC supports sensor digitization, its comparator supports threshold and guard functions, and the two USARTs can connect to a display or isolated communications module. The five low-power modes help reduce average energy use, while the hardware multiplier assists fixed-point processing. Production designs still require medical-regulatory assessment, patient-signal isolation where applicable, and validation of all safety and leakage requirements.
Recommandé
Embedded Control and Monitoring
The MSP430F1481IPM supports embedded monitoring and supervisory-control systems that combine digital control with limited analog measurement. Its 16-bit architecture, hardware multiplier, two USARTs, SPI, comparator, and 22 I/O ports provide a useful mix of control and communication resources in one 64-pin LQFP package. The 8 MHz clock provides useful processing headroom without requiring a high-power external processor. Establish a task schedule around the hardware multiplier, configure unused pins deliberately, and use the low-power modes only after checking the behavior of attached sensors and communication devices.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MSP430F1481IPM — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MSP430F148IPM | MSP430F149IPM | MSP430F1491IPM |
|---|---|---|---|---|
| Package | 64-pin LQFP (PM) | 64-pin LQFP (PM) | 64-pin LQFP (PM) | 64-pin LQFP (PM) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Maximum Clock Frequency | 8 MHz | 8 MHz | 8 MHz | 8 MHz |
| CPU Architecture | 16-bit RISC | 16-bit RISC | 16-bit RISC | 16-bit RISC |
Principaux différenciateurs
- Closest identified memory and package match (vs MSP430F148IPM)
- Explicit mixed-signal peripheral specification (vs MSP430F1491IPM)
- Low-voltage operation with five power-saving modes (vs MSP430F149IPM)
Notes de conception
Place the required supply and ground decoupling capacitors directly beside the corresponding MSP430F1481IPM pins, using the capacitance and placement guidance in the manufacturer datasheet. Keep the analog reference and ADC input network physically separated from high-current switching paths. Because the device supports operation down to 1.8 V, verify the minimum voltage of every attached peripheral and ensure the regulator maintains the required voltage during wake-up transitions.
Use the manufacturer pin-description table when routing the 64-pin LQFP footprint rather than relying on a generic package image. Confirm the assignment of power, reset, analog inputs, comparator outputs, UART lines, and SPI signals on the exact device variant. Keep oscillator and high-speed communication traces short, maintain a continuous ground reference, and place analog input components close to their associated pins to minimize sensitivity to switching noise.
Do not assume that a same-package MSP430 variant is interchangeable without checking its interrupt vectors, memory map, analog peripheral configuration, and pin multiplexing. In particular, the MSP430F148IPM, MSP430F149IPM, and MSP430F1491IPM candidates may differ in memory size or peripheral population even when they use the same 64-pin LQFP land pattern. Validate the replacement against both the schematic and compiled firmware before releasing it to production.
Estimated low-power budget: if the MSP430F1481IPM remains in RAM-retention off mode at 0.1 microamp continuously, the theoretical device-only charge per year is 0.1 microamp multiplied by 8,760 hours, or approximately 0.876 milliamp-hour. Actual product consumption will be higher because active current, analog peripherals, external sensors, pull resistors, and leakage add to the budget. Use these values as an early estimate and measure the assembled system.
Informations de conformité
The manufacturer and distributor product information identifies the device as active but does not state the requested environmental and material compliance statuses.