Texas Instruments

MSP430F1481IPM - 8MHz, 48KB Flash MCU | Texas Instruments

MPN: MSP430F1481IPM ✓ فعال
1.8 V to 3.6 V Vdss 0.1 microamp Id 64-pin LQFP (PM), 10 mm x 10 mm Package 8 MHz Speed 48 KB Memory
حداقل سفارش: 1 |

MSP430F1481IPM نمای کلی

The Texas Instruments MSP430F1481IPM is a 16-bit ultra-low-power mixed-signal microcontroller with an 8 MHz maximum clock, 48 KB of Flash memory, 2 KB of SRAM, and a 64-pin LQFP package. Its integrated peripherals include a 12-bit ADC, comparator, SPI/UART interfaces, two USARTs, and a hardware multiplier. The device supports a 1.8 V to 3.6 V supply range, making it suitable for portable measurement, industrial control, and low-energy sensor systems. The MSP430F1481IPM combines compact mixed-signal integration with five low-power operating modes and RAM retention capabilities.

A mixed-signal microcontroller is a semiconductor that integrates a digital processor with functions such as analog-to-digital conversion and comparators. In the MSP430 hierarchy, the device belongs to the MSP430 family of ultra-low-power 16-bit RISC microcontrollers. This family is designed around a 16-bit CPU, 16-bit registers, efficient interrupt handling, and low-power modes intended to extend battery life in portable measurement equipment.

The principal features include 48 KB Flash for firmware and constants, 2 KB SRAM for working data, an 8 MHz CPU clock, and a 12-bit ADC. The hardware multiplier improves the execution speed of multiply-intensive routines, while two USARTs and SPI support communication with sensors, displays, data converters, and external processors. A comparator enables threshold-based signal conditioning without requiring a separate comparator. The 1.8 V to 3.6 V operating range supports both low-energy and conventional 3.3 V system rails.

The MSP430 architecture emphasizes rapid interrupt servicing and deterministic control. Its five low-power modes allow firmware to stop the CPU when work is complete and restart it when an interrupt or wake-up event occurs. Standby wake-up is described as occurring in less than 1 microsecond, which is useful for short measurement cycles. RAM-retention operation consumes 0.1 microamp according to the MSP430F1481IPM datasheet excerpt, supporting systems that must preserve state while minimizing energy use.

Typical uses include battery-powered data loggers, industrial sensor interfaces, portable instrumentation, smart metering, and embedded control systems that need local analog measurement. Two USARTs allow simultaneous connection of multiple serial peripherals, while the ADC and comparator can handle analog front-end tasks directly. The LQFP-64 package also exposes substantially more I/O than a small leadless package, making external sensors, indicators, and communication interfaces easier to connect.

When designing around this device, account for analog input bandwidth, reference voltage, and ADC sampling time rather than treating the ADC as an unlimited-rate converter. Keep sensitive analog and digital return paths separated appropriately, place decoupling capacitors close to the supply pins, and use the manufacturer’s pin-description table when assigning PCB functions. Firmware should use the low-power modes only after accounting for wake-up sources, retained RAM, and required communication timing.

This page combines manufacturer specifications, sourcing guidance, drop-in replacement analysis, application context, and practical PCB advice for engineers evaluating the MSP430F1481IPM. It also distinguishes exact substitutes from broader MSP430 family members so board-level compatibility can be checked before a replacement is approved.

جایگزین‌های drop-in برای MSP430F1481IPM — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای MSP430F1481IPM (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Supply Voltage Range, ADC Resolution, Comparator, Flash Memory.

Texas Instruments
Package: 64-pin LQFP (PM), 10 x 10 mm
Supply Voltage Range: 2.5 V to 3.3 V
مقایسه با MSP430F1481IPM →
Texas Instruments
Package: 64-LQFP (10x10 mm)
Supply Voltage Range: 1.8 V to 3.6 V (MSP430F14x family)
ADC Resolution: 12-bit
مقایسه با MSP430F1481IPM →
Texas Instruments
Package: 64-LQFP (PM), 10x10 mm
مقایسه با MSP430F1481IPM →

MSP430F148IPM

✅ جایگزین مستقیم
Texas Instruments
📦 64-pin LQFP (PM)
16-bit MSP430 RISC · 8 MHz · 48 KB · 2 KB · 12 bit · Integrated · SPI and UART · 2

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MSP430F149IPM

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Texas Instruments
📦 64-pin LQFP (PM)
MSP430 CPU16 (16-bit RISC) · MSP430x1xx · 8 MHz · 60 KB Flash (60K x 8 + 256B info) · 2 KB · 1.8 V to 3.6 V · 280 µA · 1.6 µA

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MSP430F1491IPM

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Texas Instruments
📦 64-pin LQFP (PM)
MSP430 CPU16 (16-bit RISC) · 16-bit · 8 MHz · 60KB (60K x 8 + 256B) · 2KB · 2 USART + HW multiplier · 12-bit · 8

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MSP430F1481IPM حداکثر مقادیر مجاز و مشخصات الکتریکی

CPU Architecture 16-bit RISC
حداکثر فرکانس کلاک 8 MHz
Flash Memory 48 KB
SRAM 2 KB
ADC Resolution 12 bit
Comparator Integrated
USART Count 2
SPI Interface Integrated
Hardware Multiplier Integrated 16-bit hardware multiplier
Supply Voltage Range 1.8 V to 3.6 V
I/O Port Count 22
Power-Saving Modes 5 modes
RAM-Retention Off Current 0.1 microamp
Standby Wake-Up Time Less than 1 microsecond
بسته‌بندی 64-pin LQFP (PM), 10 mm x 10 mm
نوع نصب Surface mount

راهنمای پیکربندی پین MSP430F1481IPM 64-pin lqfp (pm), 10 mm x 10 mm

پیکربندی پین برای MSP430F1481IPM (پکیج 64-pin lqfp (pm), 10 mm x 10 mm). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 64-pin lqfp (pm), 10 mm x 10 mm برای MSP430F1481IPM

داده پین‌آوت تفصیلی موجود نیست برای MSP430F1481IPM.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MSP430F1481IPM مناسب است برای 6 کاربردs: Battery-Powered Data Loggers, Industrial Sensor Interfaces, Portable Measurement Instruments, Smart Metering Systems, Battery-Powered Medical Sensors, Embedded Control and Monitoring.

🔋

Battery-Powered Data Loggers

The MSP430F1481IPM fits battery-powered data loggers because its 1.8 V to 3.6 V operating range, five low-power modes, and 0.1 microamp RAM-retention off current support long idle periods between measurements. Its 48 KB Flash stores firmware and calibration data, while 2 KB SRAM handles acquisition buffers and operating state. The less-than-1-microsecond standby wake-up supports rapid response to scheduled sampling or external interrupts. Firmware should retain only essential variables, disable unused peripherals, and restore the sampling configuration immediately after wake-up.

🏭

Industrial Sensor Interfaces

The MSP430F1481IPM is appropriate for industrial sensor interfaces that combine analog measurement with serial connectivity. Its 12-bit ADC can digitize sensor outputs, the comparator can perform threshold detection, and two USARTs can connect remote sensors or local transceivers. The 64-pin LQFP package provides 22 I/O ports according to the manufacturer listing, leaving interface capacity beyond the analog and serial functions. Use separate analog and digital grounding strategies, validate ADC source impedance, and observe the datasheet’s recommended input and reference-capacitor arrangements.

🧰

Portable Measurement Instruments

The MSP430F1481IPM supports portable instruments where low energy, measurement accuracy, and compact integration are important. The 8 MHz RISC core handles control logic, the 12-bit ADC acquires process or sensor signals, and the hardware multiplier accelerates arithmetic used in calibration and signal processing. Its low-power modes allow the instrument to consume little energy between operator actions or measurement events. Place the ADC input network close to the device, provide a stable reference source, and verify acquisition timing before selecting the maximum sampling rate.

🔌

Smart Metering Systems

The MSP430F1481IPM can serve as the control MCU in a smart meter or remote measurement terminal. Two USARTs support serial metering peripherals and communications equipment, while SPI can connect to external nonvolatile storage or a higher-speed sensor. Flash provides 48 KB for application code and configuration, and the broad 1.8 V to 3.6 V range accommodates low-voltage front ends. Security-sensitive metering designs should add the required authentication and encryption functions, isolate communication transceivers appropriately, and confirm wake-up behavior across all operating modes.

💊

Battery-Powered Medical Sensors

The MSP430F1481IPM is suitable for low-power medical sensor signal-processing modules that need local ADC measurement and flexible serial connectivity. Its 12-bit ADC supports sensor digitization, its comparator supports threshold and guard functions, and the two USARTs can connect to a display or isolated communications module. The five low-power modes help reduce average energy use, while the hardware multiplier assists fixed-point processing. Production designs still require medical-regulatory assessment, patient-signal isolation where applicable, and validation of all safety and leakage requirements.

🔧

Embedded Control and Monitoring

The MSP430F1481IPM supports embedded monitoring and supervisory-control systems that combine digital control with limited analog measurement. Its 16-bit architecture, hardware multiplier, two USARTs, SPI, comparator, and 22 I/O ports provide a useful mix of control and communication resources in one 64-pin LQFP package. The 8 MHz clock provides useful processing headroom without requiring a high-power external processor. Establish a task schedule around the hardware multiplier, configure unused pins deliberately, and use the low-power modes only after checking the behavior of attached sensors and communication devices.

What are the key specifications of MSP430F1481IPM that engineers should know?
The MSP430F1481IPM is an 8 MHz, 16-bit ultra-low-power mixed-signal MCU with 48 KB Flash, 2 KB SRAM, a 12-bit ADC, two USARTs, SPI, a comparator, and a hardware multiplier in a 64-pin LQFP package. According to the Texas Instruments MSP430F14x, MSP430F14x1, and MSP430F13x Mixed-Signal Microcontrollers datasheet (Rev. H), its 1.8 V to 3.6 V supply range and five low-power modes suit battery-powered measurement and embedded industrial control systems.
What is the operating voltage of MSP430F1481IPM?
The MSP430F1481IPM operates from 1.8 V to 3.6 V. The Texas Instruments MSP430F14x, MSP430F14x1, and MSP430F13x Mixed-Signal Microcontrollers datasheet (Rev. H) identifies this range as suitable for low-voltage embedded systems. Designers should verify that every external peripheral and pull network remains within its own voltage limits when operating near either boundary.
How much Flash and RAM does MSP430F1481IPM have?
The MSP430F1481IPM provides 48 KB of Flash memory and 2 KB of SRAM. According to the Texas Instruments MSP430F14x, MSP430F14x1, and MSP430F13x Mixed-Signal Microcontrollers datasheet (Rev. H), Flash stores firmware and nonvolatile constants, while SRAM supports stack operations, working variables, and data buffers. For large capture buffers or protocol-heavy firmware, system memory requirements should be checked before finalizing the design.
Where can I download the MSP430F1481IPM datasheet PDF?
The official MSP430F1481 datasheet and ordering information are available on the Texas Instruments product page at https://www.ti.com/product/MSP430F1481. The device-specific page also links the MSP430F14x, MSP430F14x1, and MSP430F13x Mixed-Signal Microcontrollers datasheet (Rev. H). Use the manufacturer PDF for the authoritative pin descriptions, electrical limits, ADC characteristics, and package drawings.
Where can I find the MSP430F1481IPM pinout?
The MSP430F1481IPM pinout is documented in the manufacturer’s MSP430F14x, MSP430F14x1, and MSP430F13x Mixed-Signal Microcontrollers datasheet (Rev. H), linked from the Texas Instruments product page. The device uses a 64-pin LQFP (PM) package, so PCB assignments should be transcribed from the manufacturer pin-description table rather than inferred from the generic package drawing.
Where can I buy MSP430F1481IPM online?
The MSP430F1481IPM can be requested through the Request a Quote form on this page. The form is the appropriate route for checking current unit availability, production allocation, and lead time for the exact MSP430F1481IPM ordering code. Confirm the 64-pin LQFP package and manufacturer part number before submitting a production request.
What is the current lead time for MSP430F1481IPM?
Current lead time for MSP430F1481IPM should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, scheduled production, and component availability, so use the form to request the latest delivery information for the exact 64-pin LQFP ordering code. The manufacturer lists the device as active, which supports continued sourcing review rather than an obsolete-part replacement.
Is MSP430F1481IPM in stock?
Current stock for MSP430F1481IPM is confirmed through the Request a Quote form on this page. Submit the required quantity and target delivery date to obtain the latest availability response. Because inventory changes independently of technical specifications, engineers should not treat a cached listing status as a production allocation commitment.
What is the best drop-in replacement for MSP430F1481IPM?
MSP430F148IPM is the closest identified drop-in candidate because it uses the same 64-pin LQFP package, retains the 8 MHz clock and 48 KB Flash configuration, and is presented as an MSP430x1xx device with the same pin count. Board-level compatibility should still be confirmed against the manufacturer pin tables for every power, reset, analog, and communication signal before substitution.
Can MSP430F148IPM replace MSP430F1481IPM?
Yes, MSP430F148IPM is a strong same-package replacement candidate for MSP430F1481IPM, with both devices listed at 8 MHz, 48 KB Flash, and 64-pin LQFP. The replacement still requires firmware and schematic review because peripheral assignments and device-specific functions must be checked in the manufacturer documentation for each ordering code.
What can replace MSP430F1481IPM?
MSP430F148IPM, MSP430F149IPM, and MSP430F1491IPM are the identified MSP430 family replacement candidates in the 64-pin LQFP format. MSP430F148IPM provides the closest stated memory match, while the F149-family options provide additional Flash or SRAM. Firmware migration, peripheral differences, and pin-level review remain mandatory even when the land pattern is unchanged.
MSP430F1481IPM vs MSP430F148IPM - which is better for a new design?
MSP430F1481IPM is the preferred choice when the required peripheral set includes the identified 12-bit ADC, comparator, two USARTs, SPI, and hardware multiplier, because those functions are explicitly listed for the F1481. MSP430F148IPM remains appropriate when its verified peripherals satisfy the design and software can operate without an F1481-specific function. Both use the same 64-pin LQFP format and 8 MHz clock.
When should I choose MSP430F1481IPM over MSP430F149IPM?
Choose MSP430F1481IPM when the design benefits from its specified 48 KB Flash, 2 KB SRAM, 12-bit ADC, comparator, two USARTs, SPI, and hardware multiplier without requiring the larger memory configuration associated with the F149 family. Choose an F149-family option only after confirming that its additional memory is necessary and that its application software and peripheral configuration remain compatible.
Is MSP430F1481IPM suitable for battery-powered sensor systems?
Yes, MSP430F1481IPM is suitable for battery-powered sensor systems because it combines a 1.8 V to 3.6 V supply range with five low-power operating modes and a documented 0.1 microamp RAM-retention off current. The Texas Instruments mixed-signal MCU datasheet also reports standby wake-up in less than 1 microsecond, supporting duty-cycled measurement systems that must respond quickly while minimizing inactive energy use.
What is the best cross-brand equivalent for MSP430F1481IPM?
No verified cross-brand drop-in equivalent has been established for MSP430F1481IPM. The available cross-reference results identify same-manufacturer MSP430 options but do not document a competitor MCU with the same 64-pin LQFP land pattern and peripheral assignments. Treat a cross-brand substitution as a redesign unless a manufacturer supplies an explicit pin-compatible cross-reference and your engineering team verifies it.
What tools are compatible with MSP430F1481IPM?
MSP430F1481IPM is programmed through the Texas Instruments MSP430 toolchain and supported debugging interfaces listed for the MSP430 family. The exact debugger, target board, programming software, and operating-system support should be selected from the current MSP430 product and tool documentation. Confirm that the chosen tool supports the MSP430F14x1 device variant and its 64-pin LQFP target configuration.

داده‌های مرجع مهندسی برای MSP430F1481IPM — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose MSP430F1481IPM when a design needs the explicitly identified combination of an 8 MHz 16-bit core, 48 KB Flash, 2 KB SRAM, 12-bit ADC, comparator, two USARTs, SPI, and hardware multiplier within a 64-pin LQFP package. Choose MSP430F148IPM when its verified peripheral set matches the application and you want the closest same-package memory configuration. Consider MSP430F149IPM or MSP430F1491IPM when the MSP430F14x architecture and footprint are acceptable but additional memory would simplify firmware, logging, or buffering. No verified cross-brand drop-in device is established, so changing manufacturers should be treated as a redesign. For every replacement, compare the exact pin descriptions, memory map, interrupt vectors, analog functions, operating limits, and programming configuration against the original schematic.

مقایسه با جایگزین‌ها

پارامتر این محصول MSP430F148IPM MSP430F149IPM MSP430F1491IPM
Package 64-pin LQFP (PM) 64-pin LQFP (PM) 64-pin LQFP (PM) 64-pin LQFP (PM)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Maximum Clock Frequency 8 MHz 8 MHz 8 MHz 8 MHz
CPU Architecture 16-bit RISC 16-bit RISC 16-bit RISC 16-bit RISC

تفاوت‌های کلیدی

  • Closest identified memory and package match (در مقابلMSP430F148IPM)
  • Explicit mixed-signal peripheral specification (در مقابلMSP430F1491IPM)
  • Low-voltage operation with five power-saving modes (در مقابلMSP430F149IPM)

یادداشت‌های طراحی

Place the required supply and ground decoupling capacitors directly beside the corresponding MSP430F1481IPM pins, using the capacitance and placement guidance in the manufacturer datasheet. Keep the analog reference and ADC input network physically separated from high-current switching paths. Because the device supports operation down to 1.8 V, verify the minimum voltage of every attached peripheral and ensure the regulator maintains the required voltage during wake-up transitions.

Use the manufacturer pin-description table when routing the 64-pin LQFP footprint rather than relying on a generic package image. Confirm the assignment of power, reset, analog inputs, comparator outputs, UART lines, and SPI signals on the exact device variant. Keep oscillator and high-speed communication traces short, maintain a continuous ground reference, and place analog input components close to their associated pins to minimize sensitivity to switching noise.

Do not assume that a same-package MSP430 variant is interchangeable without checking its interrupt vectors, memory map, analog peripheral configuration, and pin multiplexing. In particular, the MSP430F148IPM, MSP430F149IPM, and MSP430F1491IPM candidates may differ in memory size or peripheral population even when they use the same 64-pin LQFP land pattern. Validate the replacement against both the schematic and compiled firmware before releasing it to production.

Estimated low-power budget: if the MSP430F1481IPM remains in RAM-retention off mode at 0.1 microamp continuously, the theoretical device-only charge per year is 0.1 microamp multiplied by 8,760 hours, or approximately 0.876 milliamp-hour. Actual product consumption will be higher because active current, analog peripherals, external sensors, pull resistors, and leakage add to the budget. Use these values as an early estimate and measure the assembled system.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The manufacturer and distributor product information identifies the device as active but does not state the requested environmental and material compliance statuses.

تاریخ تأیید داده‌ها: 2026-11-20 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

MSP430F1481IPM datasheet MSP430F1481IPM pinout MSP430F1481IPM datasheet pdf MSP430F1481IPM specifications MSP430F1481IPM equivalent MSP430F1481IPM replacement MSP430F1481IPM vs MSP430F148IPM MSP430F1481IPM LQFP-64 pinout MSP430F1481IPM price MSP430F1481IPM stock Texas Instruments MSP430F1481IPM MSP430F1481 8MHz 48KB Flash MCU MSP430F1481IPM low power application circuit MSP430F1481IPM footprint

قطعات و اصطلاحات مرتبط

Texas Instruments MSP430F1481IPM MSP430F148IPM MSP430F149IPM MSP430F1491IPM MSP430 mixed-signal microcontroller microcontroller 16-bit RISC CPU embedded processor semiconductor ultra-low-power MCU 12-bit ADC analog comparator USART SPI hardware multiplier Flash memory SRAM low-power mode RAM retention LQFP-64 LQFP package surface-mount package industrial sensor interface battery-powered data logger
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ