Texas Instruments

MSP430F5632IPZ - 20MHz 256KB Flash MCU | Texas Instruments

Référence : MSP430F5632IPZ ✓ Actif
3 V Vdss 100-pin LQFP (PZ) Package 20 MHz Speed 256 KB Memory
MOQ : 1 |

MSP430F5632IPZ Présentation

Texas Instruments MSP430F5632IPZ is a 16-bit mixed-signal microcontroller operating at up to 20 MHz, with 256 KB of Flash memory, 16 KB of SRAM, and USB connectivity in a 100-pin LQFP package. The device integrates a comparator, DMA controller, UART, SPI, I2C, timers, and a hardware multiplier.

An MSP430 mixed-signal microcontroller combines a low-power 16-bit RISC processor with analog and digital peripherals on one device. The MSP430F5632 belongs to the broader MCU hierarchy, where microcontrollers sit between general-purpose processors and application-specific embedded controllers. Its five low-power modes and integrated peripherals are designed for portable measurement, industrial control, communications, and battery-powered instrumentation.

The principal specifications include a 20 MHz maximum clock, 256 KB of Flash program memory, and 16 KB of SRAM. The integrated DMA controller supports efficient peripheral transfers, while the hardware multiplier accelerates multiply-accumulate operations. USB, UART, SPI, and I2C interfaces provide several options for host connectivity, sensor interfaces, data acquisition, and external memory or peripheral expansion.

The MSP430F5632 uses a powerful 16-bit RISC CPU with 16-bit registers and constant generators. This architecture is suited to control loops that require deterministic peripheral access and mixed analog-digital signal processing. The comparator provides an internal threshold function for sensor signals, reducing the need for external conditioning in suitable measurement designs.

Typical uses include industrial sensor nodes, USB-connected acquisition systems, portable medical and laboratory instruments, building-control equipment, and low-power data loggers. The device is particularly appropriate when several communication interfaces, timers, and a hardware multiplier are needed without adding separate interface controllers.

PCB implementation should preserve short analog and digital return paths, provide appropriate decoupling at the supply pins, and route high-speed USB signals as a controlled impedance differential pair. Confirm the complete 100-pin assignment and board-management requirements against the manufacturer datasheet before releasing the layout.

This page combines the device specifications, pin-compatible family alternatives, interface requirements, and practical integration guidance to support component selection, schematic review, PCB design, sourcing, and lifecycle planning.

Alternatives de remplacement direct pour MSP430F5632IPZ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

MSP430F5630IPZ

✅ Remplacement direct
📦 100-pin LQFP (PZ)
20 MHz clock and 100-pin LQFP package match; memory, USB, and peripheral differences require validation

📋 Alternative de référence (hors catalogue)

MSP430F5632IPZ Valeurs maximales et caractéristiques électriques

CPU Architecture 16-bit RISC
Fréquence d'horloge maximale 20 MHz
Flash Memory 256 KB
SRAM 16 KB
Registers 16-bit
DMA Controller Integrated
Hardware Multiplier Integrated
Comparator Integrated
USB Interface Integrated
Serial Interfaces UART, SPI, and I2C
Timers Integrated
Tension d'alimentation 3 V
Température de fonctionnement -40°C to +85°C
Boîtier 100-pin LQFP (PZ)
Package Body Size 14 mm × 14 mm
Type de montage Surface mount
Low-Power Modes 5 modes

Guide de configuration des broches du MSP430F5632IPZ 14 mm × 14 mm

Configuration des broches du MSP430F5632IPZ (boîtier 14 mm × 14 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 14 mm × 14 mm pour le MSP430F5632IPZ

Aucune donnée de brochage détaillée disponible pour MSP430F5632IPZ.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

MSP430F5632IPZ convient pour 6 applications: Industrial Sensor Node, USB Data Acquisition System, Portable Medical Instrument, Building Control Endpoint, Battery-Powered Data Logger, Communications Interface Module.

🏭

Industrial Sensor Node

The MSP430F5632IPZ fits an industrial sensor node that must combine local signal conditioning with low-power processing and flexible communications. Its integrated comparator can monitor an analog threshold, while the 16-bit CPU and 256 KB of Flash provide room for measurement algorithms, calibration logic, and communication firmware. The 16 KB of SRAM supports buffered acquisition and protocol state. UART, SPI, I2C, and USB permit connection to local sensors, an embedded gateway, or a maintenance computer. Five low-power modes are particularly useful when the node spends long intervals idle. A major design consideration is that the 100-pin LQFP footprint requires careful separation of analog inputs, digital interfaces, and USB routing on a mixed-signal board.

🖥️

USB Data Acquisition System

The MSP430F5632IPZ is suited to a USB-connected data acquisition system because it combines a 20 MHz 16-bit core, 256 KB of Flash, 16 KB of SRAM, USB, DMA, timers, and a hardware multiplier on one device. DMA can reduce processor involvement during transfers, while the hardware multiplier accelerates filtering and calibration operations. The comparator can provide a simple threshold input without requiring a separate comparator for every measurement channel. Firmware can buffer samples, format results, and transmit them over USB to a host computer. During PCB layout, route the USB differential pair as a controlled-impedance pair with a continuous reference plane, place decoupling close to the supply pins, and separate the analog input section from switching and digital return currents.

💊

Portable Medical Instrument

The MSP430F5632IPZ can serve as the control core of a portable medical or laboratory instrument when low-power operation, local measurement, and compact connectivity are priorities. The 16-bit RISC processor supports responsive control logic, the 256 KB of Flash accommodates application code, and the 16 KB of SRAM is useful for sample buffers and display or communications state. The integrated comparator can assist with sensor-threshold detection, while UART, SPI, I2C, and USB support different external devices. Five low-power modes help reduce energy use between measurements. Because this is a general-purpose MCU rather than a qualified medical-device component, compliance depends on the complete system design, risk controls, validation, and the intended electrical environment rather than the MCU alone.

🏭

Building Control Endpoint

The MSP430F5632IPZ is appropriate for a building-control endpoint that must monitor inputs and communicate through several industrial interfaces. Its 20 MHz execution rate supports responsive control tasks, and the 256 KB of Flash provides capacity for protocol stacks, diagnostics, and configuration data. The integrated comparator, timers, DMA controller, and hardware multiplier reduce external component requirements. UART or RS-485-style circuitry can serve longer wired links, while SPI supports sensors and I2C supports low-speed peripherals; USB can provide a service connection. The five low-power modes are valuable in equipment that operates continuously but may enter reduced-activity states. Layout should group interface protection near board edges, maintain short ground returns, and isolate switching regulators and high-current actuators from sensitive measurement paths.

🔋

Battery-Powered Data Logger

The MSP430F5632IPZ supports a battery-powered data logger that periodically records sensor information and remains available through multiple communication paths. The 16-bit RISC core, 256 KB of Flash, and 16 KB of SRAM balance computational capability with compact resource use. The integrated comparator can monitor battery or sensor thresholds, while timers help schedule logging and sleep intervals. Low-power modes can reduce consumption between samples, and DMA can transfer peripheral data efficiently. I2C and SPI suit local sensors, UART supports a low-speed host link, and USB enables faster configuration or data transfer when connected. Designers should calculate average current from the active time, standby current, leakage paths, and accessory activity rather than relying only on the CPU specification. Use the five low-power modes intentionally and disable unused peripherals to achieve the intended battery life.

🌐

Communications Interface Module

The MSP430F5632IPZ can act as the controller in a communications interface module that bridges local sensors or processors to USB, UART, SPI, or I2C. Its 20 MHz 16-bit core and hardware multiplier provide capacity for protocol processing and buffering, while DMA supports efficient background transfers. The 256 KB of Flash is useful for firmware, configuration data, and update logic, and the 16 KB of SRAM can hold packet queues and interface state. The integrated comparator may be used for carrier or threshold detection where appropriate. In implementation, assign each serial interface according to its electrical requirements, isolate grounds where needed, and keep USB signal routing away from analog inputs. Firmware should also handle transient communication errors and verify that any alternate MSP430 family device preserves every required peripheral and pin function.

Récapitulatif des produits recommandés

MSP430F5632IPZ Texas Instruments Utilisé dans : Industrial Sensor Node, USB Data Acquisition System, Portable Medical Instrument, Building Control Endpoint, Battery-Powered Data Logger, Communications Interface Module MSP430F5630IPZ Same-package family alternative for evaluation Utilisé dans : Industrial Sensor Node, USB Data Acquisition System, Portable Medical Instrument, Building Control Endpoint, Battery-Powered Data Logger, Communications Interface Module
What are the key specifications of MSP430F5632IPZ that engineers should know?
The MSP430F5632IPZ is a 20 MHz, 16-bit mixed-signal MCU with 256 KB of Flash, 16 KB of SRAM, and integrated USB, UART, SPI, I2C, DMA, comparator, timers, and hardware multiplier. According to the Texas Instruments MSP430F5632 product page, it is packaged in a 100-pin LQFP and rated from -40°C to +85°C.
Where can I download the MSP430F5632IPZ datasheet PDF?
The official MSP430F5632 datasheet and supporting documentation are available through the Texas Instruments product page at https://www.ti.com/product/MSP430F5632. The ordering-information page for MSP430F5632IPZ is also available at https://www.ti.com/product/MSP430F5632/part-details/MSP430F5632IPZ and identifies the PZ package and 100-pin configuration.
Where can I find the MSP430F5632IPZ pinout?
Use the pin-description table in the manufacturer datasheet linked from https://www.ti.com/product/MSP430F5632 to assign all 100 PZ-package pins. The package is a 100-pin LQFP measuring 14 mm by 14 mm. Because the complete pin names and alternate functions are not reproduced in this page, use the datasheet tables as the authoritative source for PCB routing and design.
What is the difference between MSP430F5632IPZ and MSP430F5630IPZ?
Both parts are 20 MHz Texas Instruments MSP430 microcontrollers offered in the 100-pin LQFP family, but they are not guaranteed to be functionally identical. A cross-reference listing identifies MSP430F5630IPZ as similar to MSP430F5632IPZ while noting electrical differences. Review memory, USB, analog, and peripheral assignments in the datasheets before treating either device as a replacement.
When should I choose MSP430F5632IPZ over MSP430F5630IPZ?
Choose MSP430F5632IPZ when the design specifically requires its documented combination of 256 KB Flash, 16 KB SRAM, USB, UART, SPI, I2C, DMA, comparator, timers, and a hardware multiplier. Choose MSP430F5630IPZ only after confirming that its specific memory and peripheral configuration satisfies the product requirements. Firmware, board dependencies, and pin-level differences must also be reviewed.
What is the best drop-in replacement for MSP430F5632IPZ?
MSP430F5630IPZ is the closest listed family alternative because both are 20 MHz devices in 100-pin LQFP packages, but it should not be treated as an unconditional drop-in replacement. The cross-reference listing notes that some electrical characteristics differ. Validate USB behavior, memory capacity, analog functions, pin multiplexing, and existing board dependencies before production substitution.
Can MSP430F5632IPZ replace MSP430F5358?
The MSP430F5632IPZ may fit an MSP430F5358 design only after a detailed pin and peripheral audit. A Texas Instruments engineering discussion reports that almost all pins are compatible except for the USB-related pins and board-management pins, including LDOI, LDO0, V18, and PUR. Confirm whether those connections are required by the target board before replacing the device.
Is MSP430F5632IPZ suitable for low-power measurement applications?
Yes. The MSP430F5632IPZ combines a 16-bit RISC core, five low-power modes, 16 KB of SRAM, an integrated comparator, and multiple serial interfaces in one device. These characteristics support portable measurement systems that need local signal conditioning, deterministic control, and flexible communication while minimizing the number of external components.
What communications interfaces does MSP430F5632IPZ provide?
The MSP430F5632IPZ provides integrated USB, UART, SPI, and I2C interfaces according to the Texas Instruments product page. The hardware DMA controller can move data between peripherals and memory, while the hardware multiplier supports efficient arithmetic in signal-processing and control routines. Exact operating modes, baud rates, and electrical details should be confirmed in the datasheet.
Where can I buy MSP430F5632IPZ online?
Use the Request a Quote form on this page to request MSP430F5632IPZ availability, lot handling, and order confirmation. The official ordering page identifies MSP430F5632IPZ as the 100-pin PZ-package orderable device. Current lead time and minimum order quantity should be confirmed through the quote request rather than inferred from catalog pages.
What is the price of MSP430F5632IPZ?
Current commercial terms for MSP430F5632IPZ are handled through the Request a Quote form on this page. Submit the required quantity, package preference, and target date to receive a current quotation. This approach prevents a stale catalog figure from being mistaken for the price or stock status of your specific order.
What is the lead time for MSP430F5632IPZ?
The current MSP430F5632IPZ lead time depends on order quantity, factory inventory, and shipment destination. Use the Request a Quote form on this page and state the required quantity and delivery schedule. The official Texas Instruments ordering page can then be used to confirm the selected PZ-package ordering configuration.
Is MSP430F5632IPZ in stock?
Availability for MSP430F5632IPZ should be confirmed through the Request a Quote form on this page for the required quantity. The device is identified by Texas Instruments as an orderable 100-pin LQFP PZ-package part. Stock status can change by lot and order size, so it should not be inferred from a distributor search result.
What can replace MSP430F5632IPZ?
MSP430F5630IPZ is the closest listed replacement candidate because it is also a 20 MHz MSP430 device in a 100-pin LQFP package. It is not confirmed as a zero-risk drop-in replacement because the cross-reference information reports electrical differences. Check memory, USB, analog, timer, DMA, pin-multiplexing, and firmware requirements before substitution.
Is MSP430F5632IPZ the same as MSP430F5632IPZR?
MSP430F5632IPZ and MSP430F5632IPZR refer to the same MSP430F5632 device and PZ package, but the final ordering code can indicate a different shipping or packaging format. For PCB compatibility, both retain the 100-pin LQFP device configuration. Confirm the ordering suffix, reel dimensions, moisture level, and handling requirements before procurement.
What is the best Texas Instruments equivalent for MSP430F5632IPZ?
MSP430F5630IPZ is the best listed Texas Instruments family candidate for a same-package engineering review because both operate at 20 MHz and use the 100-pin LQFP format. It should be selected only when its Flash, SRAM, USB, analog, and peripheral differences are acceptable. A firmware and schematic sign-off is required before using it as a replacement.

Données de référence d'ingénierie pour MSP430F5632IPZ — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose MSP430F5632IPZ when the design requires the documented combination of a 20 MHz 16-bit RISC core, 256 KB Flash, 16 KB SRAM, USB, UART, SPI, I2C, DMA, comparator, timers, and a hardware multiplier in a 100-pin LQFP package. It is well suited to mixed-signal acquisition, portable measurement, industrial control, and communications designs that value multiple integrated peripherals and low-power modes. MSP430F5630IPZ is the closest listed family candidate for a same-package review because it also operates at 20 MHz in an LQFP package. It is appropriate only after confirming its memory, USB, analog, timer, and peripheral configuration against the schematic and firmware. For an MSP430F5358 migration, inspect USB and board-management connections because those pins require special treatment. No cross-brand drop-in alternative is established by the available technical information.

Comparaison avec les alternatives

Paramètre Ce produit MSP430F5630IPZ
Brand Texas Instruments Texas Instruments
Package 100-pin LQFP (PZ) 100-pin LQFP
Maximum Clock Frequency 20 MHz 20 MHz
CPU Architecture 16-bit RISC MSP430 16-bit architecture

Principaux différenciateurs

  • Higher documented Flash capacity within the listed close family candidate (vs MSP430F5630IPZ)
  • USB connectivity is explicitly integrated for host-facing designs (vs MSP430F5630IPZ)
  • Complete mix of control and acquisition resources (vs MSP430F5630IPZ)

Notes de conception

Assign all 100 PZ-package pins from the manufacturer pin-description table before schematic release. Preserve USB differential-pair geometry with matched impedance and an uninterrupted reference plane, place interface protection close to external connectors, and route the analog comparator inputs away from switching nodes and high-current return paths. The 14 mm by 14 mm LQFP footprint should be checked against the library dimensions, pin pitch, pin-one orientation, and thermal or assembly requirements.

Place the required supply and bypass capacitors close to their associated device pins, with the shortest possible ground-return path. Separate sensitive analog inputs from digital switching activity and route analog grounds according to the complete signal path rather than treating every ground connection as interchangeable. Review the USB, comparator, timer, and communication currents in the power budget, and ensure the regulator can support both active and transient states.

Do not assume that a 20 MHz MSP430 in the same LQFP package is a functional substitute. Before replacing MSP430F5632IPZ with MSP430F5630IPZ, compare Flash, SRAM, USB, comparator, timer, DMA, pin-multiplexing, power, and clock requirements. A board designed for an MSP430F5358 also requires special attention to USB and board-management pins because the documented migration is not universally pin-identical.

Keep USB and other high-speed digital paths free of test pads or stubs that are not part of the intended topology. Maintain consistent return-current paths beneath interfaces and use solid ground-plane continuity across the board. For the comparator and sensor inputs, use short traces, place input conditioning close to the source, and avoid sharing switching-node copper with measurement nodes. Validate edge rates and layout changes with appropriate signal-integrity analysis.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The manufacturer product and ordering pages do not state the requested compliance attributes in the available excerpts. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status in the current manufacturer documentation or declarations before qualification.

Données vérifiées le : 2026-11-15 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

MSP430F5632IPZ datasheet MSP430F5632IPZ pinout MSP430F5632IPZ datasheet pdf MSP430F5632IPZ specifications MSP430F5632IPZ equivalent MSP430F5632IPZ replacement MSP430F5632IPZ cross reference MSP430F5632IPZ vs MSP430F5630IPZ MSP430F5632IPZ footprint MSP430F5632IPZ price MSP430F5632IPZ stock Texas Instruments MSP430F5632IPZ MSP430F5632 LQFP-100 pinout MSP430F5632 USB application circuit

Composants & termes associés

Texas Instruments MSP430F5632IPZ MSP430F5632 MSP430F5630IPZ MSP430F5358 mixed-signal microcontroller microcontroller MCU embedded controller semiconductor 16-bit RISC CPU MSP430 USB UART SPI I2C DMA hardware multiplier comparator 256 KB Flash 16 KB SRAM 20 MHz clock 100-pin LQFP PZ package surface mount low-power mode
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ