Texas Instruments

OPA548T-1 - 3A High-Voltage Power Op Amp | Texas Instruments

Référence : OPA548T-1 ✓ Actif
±4 V to ±30 V Vdss 3 A Id 7-lead TO-220 power package Package
MOQ : 1 |

OPA548T-1 Présentation

The Texas Instruments OPA548T-1 is a single-channel, high-voltage, high-current operational amplifier designed for wide output-voltage swing and low-impedance load drive. It operates from ±4 V to ±30 V, provides a typical output current of 3 A, and offers a 1 MHz typical gain-bandwidth product with a 10 V/µs typical slew rate. The device is supplied in a 7-lead TO-220 power package with a heat-spreading tab.

A power operational amplifier is a specialized type of operational amplifier designed to source or sink substantial output current. Within the signal-chain hierarchy, the OPA548 belongs to the operational-amplifier category, amplifier IC category, and broader semiconductor and analog-signal-processing markets. Unlike a conventional precision op amp, it combines wide supply-voltage capability, high current capability, and thermal shutdown in a package intended for exposed PCB mounting.

The OPA548 uses laser-trimmed monolithic circuitry to provide low-level signal accuracy together with high output-voltage and current capability. Its electrical characteristics support motor-drive, loudspeaker, audio-amplifier, and power-converter interface applications where the load requires substantially more current than a conventional amplifier can provide. The thermal-shutdown E/S output can be monitored to identify an over-temperature condition.

The wide supply range supports single-supply and dual-supply systems operating between 8 V and 60 V total. A typical gain-bandwidth product of 1 MHz supports closed-loop amplifier configurations through the audio and lower-frequency control ranges, while the 10 V/µs slew rate improves large-signal response. These figures describe the device's macro performance; precision application design should use the complete manufacturer datasheet for minimum and maximum limits, load conditions, and configuration dependencies.

Typical applications include bridge-connected audio stages, DC and AC motor drivers, laser-diode bias circuits, power-converter control loops, laboratory output stages, and high-current actuator interfaces. The 3 A typical output-current capability is especially useful for low-impedance loads, while the ±30 V maximum supply voltage permits substantial output swing without moving to a lower-voltage amplifier family.

Thermal management is the central implementation constraint. The TO-220 tab must be connected to an appropriate copper area and, where required, a thermal interface compound and heatsink. The design should minimize copper trace resistance, keep the amplifier close to its load, and monitor the E/S thermal-shutdown indication. Incorrect grounding, insufficient output-stage protection, or operation beyond the device's safe area can cause oscillation or failure.

This product page combines the manufacturer's device description with package, application, comparison, and engineering guidance. It also identifies the distinction between OPA548T-1 and other OPA548 ordering variants and provides practical selection criteria for power-amplifier, motor-drive, and audio implementations.

Alternatives de remplacement direct pour OPA548T-1 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec OPA548T-1 (même facteur de forme et même empreinte) — différant par Amplifier Type, Package, Thermal Shutdown.

Texas Instruments
Amplifier Type: Single power operational amplifier
Package: 7-lead TO-220
Thermal Shutdown: Internally protected
Comparer avec OPA548T-1 →

OPA548T

✅ Remplacement direct
Texas Instruments
📦 TO-220-7
Single power operational amplifier · 1 circuit · 1 MHz · 10 V/µs · ±4 V to ±30 V · 7-lead TO-220 · 7 pins · Through-hole power package

Contactez-nous pour le prix

Voir la fiche technique →

OPA548T-1 Valeurs maximales et caractéristiques électriques

Amplifier Type Single-channel high-voltage, high-current operational amplifier
Number of Channels 1 channel
Supply Voltage Range ±4 V to ±30 V
Total Supply Voltage Range 8 V to 60 V
Typical Output Current 3 A
Typical Gain-Bandwidth Product 1 MHz
Typical Slew Rate 10 V/µs
Output Voltage Swing Wide output-voltage swing; exact limits depend on load and supply conditions
Arrêt thermique Yes; E/S output can be monitored
Boîtier 7-lead TO-220 power package
Type de montage Through-hole power package
Statut RoHS unknown
REACH Status unknown
AEC-Q100 Qualification unknown

Guide de configuration des broches du OPA548T-1 7-lead to-220 power package

Configuration des broches du OPA548T-1 (boîtier 7-lead to-220 power package). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 7-lead to-220 power package pour le OPA548T-1

Aucune donnée de brochage détaillée disponible pour OPA548T-1.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

OPA548T-1 convient pour 6 applications: High-Current Audio Output Stage, DC Motor Drive, Power Converter Control Loop, Laser and Photodiode Bias Control, Laboratory Power Output Stage, Actuator and Solenoid Interface.

🎧

High-Current Audio Output Stage

The OPA548T-1 fits high-current audio output stages because its typical 3 A output current can drive lower-impedance loudspeaker networks more effectively than a conventional precision op amp. Its 1 MHz gain-bandwidth product and 10 V/µs slew rate provide useful bandwidth and large-signal response for audio-band closed-loop designs, while supplies up to ±30 V permit a substantial output-voltage swing. The amplifier should be configured as a power stage with feedback set for the intended load, and the output path must include protection appropriate to the speaker and amplifier topology. Reactive speaker loads can introduce stability risk, so evaluate phase margin, crossover distortion, and current behavior across the frequency range. The TO-220 tab requires a low-resistance thermal path and an application-appropriate heatsink.

🏭

DC Motor Drive

OPA548T-1 is well suited to voltage-mode DC motor drive because it can operate from ±30 V and provide a typical 3 A output current. Its 10 V/µs typical slew rate allows the amplifier output to follow command-voltage transitions with lower delay than a general-purpose low-current op amp. In a typical implementation, the amplifier drives the motor terminals from a control signal, with current sensing or a driver stage added where precise torque control is required. Inductive motor windings generate back-EMF and stored energy, so the design must include suitable flyback protection and avoid exposing the output to destructive transients. Thermal dissipation, motor stall current, and copper trace width require validation at the worst operating condition.

⚡

Power Converter Control Loop

OPA548T-1 can serve as the high-current error amplifier or power stage in a boost, flyback, or other power-converter topology requiring high-voltage and high-current drive capability. Its ±4 V to ±30 V operating range supports elevated bus voltages, and its 10 V/µs typical slew rate is useful when the control loop must respond to rapid feedback corrections. The 1 MHz typical gain-bandwidth product places an upper limit on how aggressively the loop can be compensated, so the application must include suitable compensation and output filtering. A practical design should use the wide output swing conservatively, minimize compensation-node capacitance, and verify stability with the complete power stage and load. The thermal-shutdown E/S indication can support fault handling.

💡

Laser and Photodiode Bias Control

OPA548T-1 can drive precision current or voltage bias loads in laser-diode and photodiode systems where the source or sink current exceeds ordinary operational-amplifier limits. Its typical 3 A output-current capability provides ample headroom for the load current, while the 1 MHz typical gain-bandwidth product can support feedback loops operating well above audio frequencies. The amplifier should be paired with a suitable current-sense element and protection network because direct semiconductor-diode drive can expose the output to damage from excessive current or reverse voltage. Compensation must account for the diode's junction capacitance and the feedback network's noise. A low-noise reference and careful grounding are important when the intended output current or modulation bandwidth is small.

🔧

Laboratory Power Output Stage

OPA548T-1 is applicable to laboratory and instrumentation output stages that need to drive low-impedance or current-sensitive loads from a low-level command signal. The ±30 V maximum supply and typical 3 A output current provide considerably more range than a conventional precision amplifier, while the 10 V/µs slew rate supports responsive voltage changes. A practical instrument adds current limiting, offset or output-voltage calibration, and a thermal strategy suitable for sustained DC operation. Because the device is a power operational amplifier rather than a laboratory reference amplifier, noise, output impedance, and closed-loop accuracy must be characterized in the intended configuration. The 7-lead TO-220 package also requires careful isolation from sensitive measurement circuitry and adequate creepage where elevated voltages are present.

🏭

Actuator and Solenoid Interface

OPA548T-1 can serve as the output interface for medium-current actuators and solenoid-like loads where a control amplifier must source or sink substantial current. Its typical 3 A output capability is suitable for many power actuator stages, and the ±4 V to ±30 V supply range permits operation across broad industrial voltage choices. The amplifier output should not be used without an appropriate flyback or transient clamp because inductive loads can return energy to the output node when switched. Current sensing can support closed-loop force or position control, while a dedicated driver may be preferred when rapid active current control or additional protection is required. The design should account for steady-state coil heating, driver dissipation, ground offsets, and the TO-220 thermal path.

What is the OPA548T-1?
The OPA548T-1 is a single-channel, high-voltage, high-current operational amplifier from Texas Instruments for driving low-impedance loads. According to the manufacturer datasheet, it supports supplies from ±4 V to ±30 V, delivers a typical 3 A output current, and combines a 1 MHz typical gain-bandwidth product with a 10 V/µs typical slew rate. It is packaged in a 7-lead TO-220 power package with a thermally connected tab.
What is the operating voltage range of the OPA548T-1?
The OPA548T-1 operates from ±4 V to ±30 V, equivalent to an 8 V to 60 V total supply range. Texas Instruments describes the device as a high-voltage operational amplifier capable of wide output-voltage swing. The exact output limits depend on the selected supplies, output load, quiescent-current condition, and amplifier configuration, so the power-supply and output-stage sections of the manufacturer datasheet should govern the final design.
How much current can the OPA548T-1 output?
The OPA548T-1 provides a typical output current of 3 A according to the Texas Instruments device data. This high-current capability distinguishes it from conventional low-power operational amplifiers and makes it suitable for low-impedance audio, motor, actuator, and power-converter drive stages. Continuous current is limited by package dissipation, safe operating area, supply voltage, output voltage, load, and thermal conditions.
Where can I download the OPA548T-1 datasheet PDF?
The official OPA548T-1 datasheet PDF is available from the Texas Instruments document link on this page: https://www.ti.com/lit/ds/symlink/opa548.pdf. The manufacturer document describes the high-voltage, high-current operational amplifier, electrical characteristics, thermal-shutdown behavior, package drawings, and application information. It is the preferred reference for absolute maximum ratings, recommended operating conditions, and the final pin assignments.
Where can I find the OPA548T-1 pinout?
Use the pin-description table and package drawings in the official Texas Instruments OPA548 datasheet to identify all seven terminals of the OPA548T-1. The 7-lead TO-220 package includes power-supply connections, input and output terminals, a ground or substrate-related connection as applicable, and the E/S thermal-shutdown indication. Confirm every terminal against the exact ordering option before laying out the PCB.
Is OPA548T-1 suitable for driving motors?
The OPA548T-1 is suitable for many motor and actuator drive stages because it supports ±30 V supplies and a typical 3 A output current. Its 10 V/µs typical slew rate supports rapid output-voltage transitions, while the thermal-shutdown E/S output permits fault monitoring. The load's current profile, inductance, back-EMF, flyback path, switching frequency, and thermal dissipation must still be engineered for safe operation.
What is the difference between OPA548T and OPA548T-1?
OPA548T and OPA548T-1 are ordering variants within the same Texas Instruments OPA548 series, but their package ordering codes differ: OPA548T is identified with the KVT package and OPA548T-1 with the KC package. Both are associated with the 7-lead TO-220 family. Engineers should compare the specific package drawings and ordering information rather than treating the suffix difference as a change in basic amplifier function.
What can replace the OPA548T-1?
The OPA548T is the closest same-family replacement candidate identified for the OPA548T-1, subject to confirmation of the exact package drawing and ordering suffix. It is a Texas Instruments part in the same OPA548 series and retains the high-voltage, high-current power-operational-amplifier function. The other cross-reference search results identify potential manufacturers or functional equivalents without providing enough model-level information to verify pin compatibility, so they should not be treated as drop-in replacements without engineering review.
What is the best drop-in replacement for OPA548T-1?
OPA548T is the closest documented drop-in candidate for the OPA548T-1 because it belongs to the same Texas Instruments OPA548 series and uses the corresponding 7-lead TO-220 family. The ordering suffix difference must be checked against the manufacturer package drawings, particularly because TI identifies OPA548T with KVT and OPA548T-1 with KC. Verify lead geometry, thermal-tab connection, pinout, supply limits, and thermal requirements before production substitution.
When should I choose the OPA548T-1 over another power op amp?
Choose the OPA548T-1 when the design requires a single power op amp with ±30 V supply capability, a typical 3 A output current, and a 10 V/µs slew rate in a 7-lead TO-220 package. It is a stronger fit for low-impedance motor, actuator, audio, and power-control stages than conventional precision op amps. Choose another amplifier when lower voltage, lower current, tighter precision, or a surface-mount footprint is more important.
Is OPA548T-1 suitable for audio amplifier applications?
The OPA548T-1 can suit high-current audio output stages because it supports supplies up to ±30 V and a typical output current of 3 A. Its 1 MHz typical gain-bandwidth product and 10 V/µs typical slew rate are appropriate for many audio-band power-amplifier stages. Output crossover distortion, clipping behavior, stability with reactive speaker loads, current limiting, and thermal design must be verified for the selected network.
How should the OPA548T-1 be mounted for thermal stability?
Mount the OPA548T-1 with its TO-220 tab attached to an adequately sized copper region, using thermal interface compound between the tab and heatsink when applicable. Keep power-supply and output-current paths short to reduce parasitic resistance and inductance. The manufacturer datasheet provides thermal information for package and tab conditions; use the actual board copper, ambient temperature, and worst-case output waveform to establish the required thermal margin.
Where can I buy OPA548T-1 and check its current price?
Use the Request a Quote form on this page to request the current OPA548T-1 unit price, stock status, lead time, and minimum order quantity. The quote form allows the order to be evaluated against the exact Texas Instruments ordering code and 7-lead TO-220 package. Current commercial terms can change, so the form is the appropriate route for a transaction-ready quotation rather than relying on an archived price.
What is the lead time for OPA548T-1?
The current lead time for OPA548T-1 should be requested through the Request a Quote form on this page. Lead time depends on manufacturer inventory, order quantity, package configuration, and current supply conditions. Enter the required quantity and target delivery date so the commercial request can be evaluated against the exact OPA548T-1 part number rather than a family-level device.
Is the OPA548T-1 in stock?
Current OPA548T-1 inventory should be confirmed through the Request a Quote form on this page. The manufacturer lists the OPA548 family as active, but that lifecycle statement does not by itself guarantee the quantity and delivery timing of every package ordering option. Provide the required quantity, shipment destination, and target date with the request for a stock and lead-time response.
What are the key specifications of OPA548T-1 that engineers should know?
The essential OPA548T-1 specifications are a ±4 V to ±30 V supply range, typical 3 A output current, 1 MHz typical gain-bandwidth product, and 10 V/µs typical slew rate. Texas Instruments describes the device as a wide-output-voltage-swing power operational amplifier with thermal-shutdown indication through the E/S terminal. It is offered in a 7-lead TO-220 package, making exposed thermal management a central part of the design.

Données de référence d'ingénierie pour OPA548T-1 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose OPA548T-1 for a single power-amplifier stage that must operate from ±4 V to ±30 V, source or sink a typical 3 A, and use a 7-lead TO-220 package. It is particularly suitable for low-impedance audio, motor, actuator, bias-control, and power-converter interfaces where conventional op amps cannot provide enough output current. OPA548T is the closest same-series alternative, but its KVT package code differs from the OPA548T-1 KC code, so verify the package drawing and thermal-tab arrangement before substitution. Do not choose a generic power op amp unless it provides the same supply voltage, current rating, slew rate, and exact footprint. For designs requiring a surface-mount package, lower current, lower voltage, or substantially better precision, a different amplifier family may be more appropriate.

Comparaison avec les alternatives

Paramètre Ce produit OPA548T
Brand Texas Instruments Texas Instruments
Package TO-220-7 TO-220-7 family
Ordering Package Code KC KVT
Amplifier Type High-voltage, high-current power operational amplifier High-voltage, high-current power operational amplifier
Number of Channels 1 channel 1 channel
Typical Output Current 3 A 3 A
Typical Gain-Bandwidth Product 1 MHz 1 MHz
Typical Slew Rate 10 V/µs 10 V/µs
Thermal Shutdown Indication E/S output E/S output

Principaux différenciateurs

  • High-current output capability in a single power op amp (vs OPA548T)
  • Wide supply and output operating range (vs OPA548T)
  • Large-signal response for power-stage control (vs OPA548T)
  • Built-in thermal-state monitoring (vs OPA548T)

Notes de conception

Treat the TO-220 tab as the primary heat path and keep it electrically connected to the intended power or ground node specified by the manufacturer package drawing. Use a thermal interface compound and a correctly sized heatsink when the calculated output-stage dissipation is significant. Do not assume that PCB copper alone is adequate during sustained DC operation; evaluate the worst-case output voltage, load current, ambient temperature, and copper geometry.

Estimate: Pdiss = (VOUT - VSWRING) × IOUT. For a ±30 V supply and a 20 V output at 3 A, the estimated output-stage dissipation is 60 W before accounting for the amplifier's internal architecture. Use that result only as an early thermal-sizing estimate and verify it against the manufacturer safe-operating-area and thermal-resistance information. Keep supply and output paths short and use copper widths adequate for the peak current.

Do not substitute OPA548T for OPA548T-1 without checking the exact package drawings. Texas Instruments identifies OPA548T with the KVT ordering package and OPA548T-1 with KC. Confirm lead geometry, exposed-tab connection, pin functions, and thermal requirements before making a board-level substitution. Also provide appropriate flyback or clamp protection for motors, solenoids, and other inductive loads because stored energy can damage the power output stage.

Place the TO-220 device so its tab has direct access to a broad copper region, and keep high-current input and output traces short, wide, and free of unnecessary copper joints. Route sensitive feedback and compensation traces away from power-node switching edges. Use a low-impedance ground reference for feedback and current sensing, while ensuring that large return currents do not share sensitive signal-ground paths.

Compensate the amplifier for the actual load and feedback network rather than relying only on nominal small-signal bandwidth. A 1 MHz typical gain-bandwidth product and 10 V/µs typical slew rate provide useful design targets, but reactive loads, excess feedback capacitance, and power-supply decoupling can reduce stability. Use the manufacturer evaluation information and verify phase margin and transient response with the intended output wiring and protection components.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for OPA548T-1. The manufacturer lists the OPA548 family as active.

Recherches associées

opa548t 1 datasheet opa548t datasheet opa548t pdf OPA548T-1 datasheet pdf OPA548T-1 specifications OPA548T-1 pinout OPA548T-1 TO-220-7 OPA548T-1 3A op amp OPA548T-1 high voltage amplifier OPA548T-1 motor driver OPA548T-1 audio amplifier OPA548T-1 equivalent OPA548T-1 replacement OPA548T-1 price OPA548T-1 stock

Composants & termes associés

Texas Instruments OPA548T-1 OPA548T OPA548 series power operational amplifier operational amplifier amplifier IC analog signal processing semiconductor high-voltage amplifier high-current amplifier wide output-voltage swing gain-bandwidth product slew rate output current supply voltage thermal shutdown E/S output TO-220-7 TO-220 package through-hole package surface-mount package audio amplifier motor drive power converter
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ