Texas Instruments

OPA846ID - 1.75GHz Wideband Voltage-Feedback Op Amp | TI

Référence : OPA846ID ✓ Actif
12.6 mA Vdss 8-pin SOIC (D) Package
MOQ : 1 |

OPA846ID Présentation

Texas Instruments OPA846ID is a wideband, low-noise voltage-feedback operational amplifier with 1.75 GHz gain-bandwidth product, approximately 400 MHz bandwidth, and 625 V/us slew rate. The device is supplied in an 8-pin SOIC package and consumes 12.6 mA of supply current. Its combination of high speed, low input voltage noise, and strong large-signal performance makes it suitable for signal conditioning, active filtering, data acquisition, communications, and high-frequency instrumentation.

A voltage-feedback operational amplifier is a gain-control device whose closed-loop bandwidth depends primarily on the noise gain selected by the feedback network. Unlike a current-feedback amplifier, a voltage-feedback amplifier maintains a defined gain relationship through its inverting and non-inverting inputs. The OPA846 combines this familiar topology with very high gain-bandwidth product and large-signal output drive, placing it within the high-speed analog amplifier category of the broader semiconductor and signal-processing hierarchy.

The principal features of the OPA846ID include a 1.75 GHz gain-bandwidth product, approximately 400 MHz amplifier bandwidth, 625 V/us slew rate, and low 12.6 mA supply current. The low-noise architecture is suitable for systems in which the amplifier must preserve small signals while operating at high frequencies. Its low distortion and high output-drive capability also make it more useful than a general-purpose precision op amp in video, communications, and instrumentation signal paths.

Internally, the OPA846 uses a classical differential input stage, two stages of forward gain, and a high-power output stage. This architecture combines low input-voltage noise with high bandwidth and large-signal performance. The differential stage provides the low-noise input behavior, the forward-gain stages establish the high gain-bandwidth product, and the output stage supplies the current needed to drive downstream circuits while maintaining low distortion. The manufacturer identifies the device as a single-circuit, voltage-feedback amplifier.

Typical applications include wideband active filters, video-signal conditioning, ultrasound and medical instrumentation, communications receivers, test-equipment front ends, and clock or data-processing interfaces. In these applications, the 1.75 GHz gain-bandwidth product supports operation at high closed-loop gains when the feedback network is designed carefully. The 625 V/us slew rate allows the output to track large-amplitude, high-frequency signals, while low noise helps preserve weak signals ahead of later amplification or conversion stages.

Designers should account for the bandwidth and stability consequences of the selected gain. The feedback resistors and compensation network determine the effective noise gain, and parasitic capacitance around the high-speed amplifier can alter stability. Short feedback paths, careful grounding, controlled impedance routing, and clean supply decoupling are particularly important at the bandwidth levels supported by this device. Component selection must also preserve adequate phase margin at the intended closed-loop gain and signal amplitude.

OPA846ID is ordered in an 8-pin SOIC package with an operating temperature range of -40°C to +85°C. This page combines manufacturer specifications, sourcing information, drop-in candidate review, comparison data, and practical high-speed layout guidance to support component selection and board-level implementation.

Alternatives de remplacement direct pour OPA846ID — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec OPA846ID (même facteur de forme et même empreinte) — différant par Amplifier Type, Gain-Bandwidth Product, Package, Slew Rate.

Texas Instruments
Amplifier Type: Single-channel voltage-feedback amplifier
Gain-Bandwidth Product: 2 GHz
Package: 8-pin SOIC, 3.90 mm width
Comparer avec OPA846ID →

THS4021ID

✅ Remplacement direct
Texas Instruments
📦 8-pin SOIC
Single-channel voltage-feedback amplifier · 2 GHz · 290 MHz · 470 V/µs · 30 ns to 0.1% · Ultra-low voltage noise · 1 channel

Contactez-nous pour le prix

Voir la fiche technique →

OPA846ID Valeurs maximales et caractéristiques électriques

Amplifier Type Voltage-feedback operational amplifier
Number of Circuits 1 circuit
Gain-Bandwidth Product 1.75 GHz
Bandwidth 400 MHz
Slew Rate 625 V/us
Courant d'alimentation 12.6 mA
Plage de température de fonctionnement -40°C to +85°C
Boîtier 8-pin SOIC (D)
Package Width 3.90 mm
Lead Pitch 1.27 mm

Guide de configuration des broches du OPA846ID 3.90 mm

Configuration des broches du OPA846ID (boîtier 3.90 mm). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 3.90 mm pour le OPA846ID

Aucune donnée de brochage détaillée disponible pour OPA846ID.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

OPA846ID convient pour 6 applications: Wideband Active Filters, Video Signal Conditioning, Communications Receiver Front Ends, Test and Measurement Front Ends, Medical and Ultrasound Signal Chains, Data Acquisition Signal Conditioning.

🔧

Wideband Active Filters

The OPA846ID fits wideband active-filter stages requiring low-noise input behavior and substantial bandwidth. Its 1.75 GHz gain-bandwidth product provides design margin above the approximately 400 MHz device bandwidth, while the 625 V/us slew rate improves large-signal behavior compared with a general-purpose precision amplifier. The 12.6 mA supply current supports power-conscious high-speed systems without changing the device's voltage-feedback architecture. Feedback values and compensation must be selected for the intended noise gain, and the PCB should minimize parasitic capacitance so that the realized filter response remains stable and repeatable.

📺

Video Signal Conditioning

OPA846ID is appropriate for video-signal conditioning when a design needs more bandwidth and slew-rate margin than conventional precision op amps provide. The approximately 400 MHz bandwidth supports wideband video and control signals, and the 625 V/us slew rate reduces timing distortion on large transitions. Its low input-voltage noise helps preserve weak signal information before subsequent gain stages. The amplifier should be evaluated for output-swing and drive requirements against the actual source and load. Short feedback routes, solid ground return paths, and symmetrical decoupling are important because excessive trace inductance or capacitance can destabilize the high-speed feedback loop.

🌐

Communications Receiver Front Ends

The OPA846ID can serve as a high-speed gain and impedance-control stage in communications receiver front ends. Its 1.75 GHz gain-bandwidth product supports closed-loop gains well above the approximately 400 MHz small-signal bandwidth, while the low-noise input architecture is beneficial when amplification occurs before later signal processing. The 625 V/us slew rate preserves large-signal fidelity and the 12.6 mA supply current helps constrain system power. Designers should confirm the device's input common-mode range, output swing, supply requirements, and noise density for the particular receiver architecture, then preserve controlled impedance and short feedback paths.

📟

Test and Measurement Front Ends

OPA846ID is well matched to oscilloscope driver, buffer, and general test-equipment front-end functions because it combines approximately 400 MHz bandwidth with a 625 V/us slew rate and low-noise input characteristics. These specifications help the amplifier drive downstream instrumentation while maintaining waveform shape and preserving small input signals. The single-circuit 8-pin SOIC implementation also supports compact analog sections around a probe interface. Validation should include the expected load capacitance, output-current demand, and sustained waveform amplitude. Use short, direct routing, adequate supply bypassing, and a controlled return path to prevent board parasitics from limiting the amplifier's stated performance.

💊

Medical and Ultrasound Signal Chains

OPA846ID can support high-gain, wideband signal paths in medical instrumentation when the selected operating point meets the required safety, noise, and precision criteria. Its 1.75 GHz gain-bandwidth product provides closed-loop bandwidth margin, while the 625 V/us slew rate helps preserve rapid signal transitions. Low input voltage noise is favorable for weak transducer or sensor signals. Because a wideband amplifier does not by itself establish medical-system compliance, use it only after the complete signal chain has been evaluated for noise, distortion, leakage, operating temperature, and applicable regulatory requirements. Stable feedback layout remains essential in high-impedance sensor interfaces.

🖥️

Data Acquisition Signal Conditioning

OPA846ID is suitable for high-speed data-acquisition front ends that need to amplify or buffer signals before digitization. Its approximately 400 MHz bandwidth and 1.75 GHz gain-bandwidth product offer margin for sampling systems, and the 625 V/us slew rate supports full-scale transitions with less timing distortion than lower-bandwidth amplifiers. Low input-voltage noise can improve the signal-to-noise ratio before conversion, although the complete system also depends on source impedance, ADC input range, and filtering. Keep the feedback loop compact, use low-capacitance routing, and place bypass capacitors close to the supply pins to reduce susceptibility to parasitic feedback and supply impedance effects.

What are the key specifications of OPA846ID that engineers should know?
The OPA846ID is a single-circuit, wideband voltage-feedback operational amplifier with a 1.75 GHz gain-bandwidth product, approximately 400 MHz bandwidth, 625 V/us slew rate, and 12.6 mA supply current. Texas Instruments packages it in an 8-pin SOIC and specifies an operating temperature range of -40°C to +85°C. According to the manufacturer datasheet, the device uses a classical differential input stage, two forward-gain stages, and a high-power output stage to combine low input-voltage noise with strong large-signal performance.
What is the OPA846ID used for?
The OPA846ID is used where a high-speed, low-noise operational amplifier must process signals at frequencies approaching its approximately 400 MHz bandwidth. Its 1.75 GHz gain-bandwidth product supports higher closed-loop gains, while its 625 V/us slew rate supports large-amplitude, fast-changing waveforms. According to the Texas Instruments datasheet, the amplifier combines low input-voltage noise and high output drive, making it appropriate for active filtering, communications, video, instrumentation, and other wideband analog signal-conditioning applications.
Where can I download the OPA846ID datasheet PDF?
The official OPA846ID datasheet PDF is available from the Texas Instruments document link on this page. The manufacturer document identifies the OPA846 as a wideband, low-noise voltage-feedback operational amplifier and provides the detailed electrical characteristics, application information, package information, and ordering information for the OPA846ID. The related Texas Instruments product page also provides the device parameter table and links to supporting technical documentation.
Where can I find the OPA846ID pinout?
The OPA846ID pin assignment is documented in the pin-configuration section of the manufacturer datasheet and in the package drawings on the official product page. The device is an 8-pin SOIC with a 3.90 mm body width and 1.27 mm lead pitch. Use the manufacturer pin-configuration drawing when assigning input, output, supply, and biasing connections; do not infer individual pin functions from an unverified package image.
How much bandwidth and slew rate does the OPA846ID provide?
The OPA846ID provides approximately 400 MHz of bandwidth, a 1.75 GHz gain-bandwidth product, and 625 V/us slew rate. According to the Texas Instruments datasheet, these specifications combine with low-noise input behavior and a high-power output stage. Actual closed-loop bandwidth depends on the selected noise gain and feedback network, so the quoted amplifier bandwidth should not be interpreted as the usable bandwidth at every gain setting.
What is the supply current of the OPA846ID?
The OPA846ID has a stated supply current of 12.6 mA. According to the Texas Instruments manufacturer datasheet, the low 12.6 mA supply consumption accompanies the device's very high gain-bandwidth product and large-signal performance. Actual operating current depends on supply voltage, quiescent-current conditions, output loading, and the selected operating state, so board-level power estimates should use the manufacturer test conditions when performing thermal calculations.
Is the OPA846ID suitable for active filtering and video signal conditioning?
The OPA846ID is suitable for wideband active filtering and video signal conditioning because it combines a 1.75 GHz gain-bandwidth product, approximately 400 MHz bandwidth, and 625 V/us slew rate. The Texas Instruments datasheet also identifies low input-voltage noise and strong output drive as key capabilities. For these applications, the filter topology and feedback values must preserve adequate phase margin, and PCB routing must minimize parasitic feedback through power and ground paths.
OPA846ID vs THS4021ID - which is better for a high-speed filter?
The OPA846ID and THS4021ID are both identified in comparison listings involving 8-pin SOIC devices, but the available comparison information does not establish a complete set of matching electrical ratings. The OPA846ID is specifically documented with a 1.75 GHz gain-bandwidth product, approximately 400 MHz bandwidth, 625 V/us slew rate, and 12.6 mA supply current. Choose the OPA846ID when those published characteristics match the design; verify the THS4021ID against the complete manufacturer datasheet before treating it as a drop-in replacement.
What is the difference between OPA846ID and THS4021ID?
The confirmed difference is that OPA846ID is a Texas Instruments wideband voltage-feedback amplifier with a 1.75 GHz gain-bandwidth product, approximately 400 MHz bandwidth, and 625 V/us slew rate, while the available information identifies THS4021ID as an 8-pin SOIC comparison candidate. Detailed noise, supply-voltage, output-current, offset-voltage, and stability differences are not stated. Compare those parameters directly from each manufacturer datasheet before changing an approved design.
When should I choose OPA846ID over THS4021ID?
Choose the OPA846ID when the design specifically benefits from its documented 1.75 GHz gain-bandwidth product, approximately 400 MHz bandwidth, 625 V/us slew rate, and 12.6 mA supply current. The THS4021ID should be selected only after its input-noise, supply-range, output-drive, stability, and temperature specifications have been confirmed against the same requirements. This avoids treating package similarity alone as proof of equivalent performance.
Is the OPA846ID suitable for communications and instrumentation front ends?
The OPA846ID is suitable for communications and instrumentation front ends when the required signal bandwidth falls within its approximately 400 MHz capability and the circuit can preserve stability. Its 1.75 GHz gain-bandwidth product supports closed-loop operation above the small-signal bandwidth at higher gains, while 625 V/us slew rate improves large-signal tracking. According to the Texas Instruments datasheet, low input-voltage noise and high output drive make the device especially useful for preserving signal integrity through analog front-end stages.
What can replace the OPA846ID?
The THS4021ID is the clearest same-package replacement candidate identified for the OPA846ID because both use an 8-pin SOIC format. However, a PCB-compatible package does not by itself guarantee electrical equivalence. Before replacement, compare gain-bandwidth product, bandwidth, slew rate, input-noise density, supply range, offset voltage, output swing, output current, stability, and operating temperature using the manufacturer datasheets. The OPA846ID itself remains the reference choice when its published 1.75 GHz, 400 MHz, and 625 V/us characteristics are required.
Is THS4021ID pin-compatible with OPA846ID?
THS4021ID is a candidate for a board-level comparison because it is identified as an 8-pin SOIC device, matching the OPA846ID package format. Pin compatibility should still be confirmed against both manufacturers' pin-configuration drawings before a substitution is approved. The existing board must also satisfy the candidate's supply voltage, input-bias, output-swing, noise, and stability requirements; package similarity alone is not a sufficient electrical drop-in guarantee.
Where to buy OPA846ID online?
Use the Request a Quote form on this page to request OPA846ID availability, current lead time, and commercial terms for the 8-pin SOIC device. The part is identified as OPA846ID in Texas Instruments ordering information and appears in multiple distributor catalogs. Submit the required quantity, target package suffix, and delivery location with the request so the quotation reflects the exact ordered configuration.
What is the price of OPA846ID?
The OPA846ID price is maintained as structured, date-sensitive market information and is best obtained through the Request a Quote form on this page. Submit the required quantity and exact OPA846ID suffix to receive a current quotation. The form can also be used to confirm available production quantity, packaging format, and expected lead time without relying on a stale quantity-break table.
What is the lead time and stock status for OPA846ID?
The current OPA846ID lead time and stock status should be confirmed through the Request a Quote form on this page. Provide the required quantity, delivery destination, and preferred packaging format with the request. Texas Instruments lists OPA846ID in an 8-pin SOIC package, and distributor catalog entries indicate market availability, but quantity and timing should be reconfirmed for the order being placed.
Is OPA846ID RoHS compliant and suitable for automotive designs?
The available manufacturer ordering information confirms the OPA846ID package and operating range, but it does not explicitly state its RoHS, REACH, or automotive qualification status. Treat those compliance attributes as unknown until the current manufacturer product page or product-information document confirms them. The standard OPA846ID temperature range is -40°C to +85°C; an automotive design should not be qualified from temperature rating alone and should use an explicitly qualified device when required.

Données de référence d'ingénierie pour OPA846ID — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the OPA846ID when the design specifically needs its documented 1.75 GHz gain-bandwidth product, approximately 400 MHz bandwidth, 625 V/us slew rate, low-noise voltage-feedback architecture, and 12.6 mA supply current. It is particularly appropriate for wideband filters, communications and video signal paths, high-speed instrumentation, and data-acquisition stages where output-drive capability matters. The THS4021ID is a potential 8-pin SOIC replacement candidate, but it should be selected only after its noise, bandwidth, slew rate, supply range, output swing, stability, and temperature ratings are verified against the OPA846ID. OPA846ID suffix variants were not used to inflate the alternative count because reel, tape, and green-rohs packaging changes do not add distinct engineering value. For any new substitution, confirm the complete pin configuration and stability requirements rather than relying on package count alone.

Comparaison avec les alternatives

Paramètre Ce produit THS4021ID
Brand Texas Instruments Texas Instruments
Package 8-pin SOIC (D) 8-pin SOIC

Principaux différenciateurs

  • High published gain-bandwidth product (vs THS4021ID)
  • Large-signal slew performance (vs THS4021ID)
  • Low stated supply current for a wideband amplifier (vs THS4021ID)

Notes de conception

Keep the OPA846ID feedback network compact and route input, output, and feedback connections away from high-impedance or switching nodes. Place the input and output components close to their corresponding pins, and avoid routing the feedback return beneath the device or across parallel signal paths. At the amplifier's approximately 400 MHz bandwidth, small parasitic capacitances and long loops can alter phase margin and cause ringing or oscillation.

Use short, low-inductance connections from each supply pin to local bypass capacitors, and follow the manufacturer datasheet's recommended decoupling configuration. Decoupling should be placed directly across the relevant supply pins rather than at a distant power entry point. Because the OPA846ID draws 12.6 mA under the manufacturer's stated condition, the actual board power and junction-temperature estimate must also include output current, supply voltage, ambient temperature, and copper area.

Do not assume that the 1.75 GHz gain-bandwidth product is the usable closed-loop bandwidth at every gain. Effective bandwidth is governed by noise gain and stability, and the 625 V/us slew rate must also be sufficient for the largest expected signal amplitude and frequency. Before substituting another amplifier, verify noise density, offset voltage, supply range, common-mode range, output swing, output current, operating temperature, and compensation-network requirements.

Preserve controlled impedance for high-frequency signal routes and maintain a continuous ground reference beneath the analog section. Avoid long stubs and unnecessary test pads on sensitive nodes because their capacitance can increase peaking near the amplifier's upper bandwidth. If input, output, and supply connections cannot be kept short on the selected PCB stack-up, consider a smaller package or a different amplifier family with board-layout requirements better matched to the system.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The available manufacturer ordering information confirms the OPA846ID package and operating temperature but does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not stated for this ordering code.

Données vérifiées le : 2026-11-09 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

OPA846ID datasheet OPA846ID pinout OPA846ID datasheet pdf OPA846ID equivalent OPA846ID replacement OPA846ID cross reference OPA846ID vs THS4021ID OPA846ID SOIC-8 footprint OPA846ID active filter OPA846ID video amplifier OPA846ID price OPA846ID stock Texas Instruments OPA846ID OPA846ID 1.75GHz amplifier

Composants & termes associés

Texas Instruments OPA846 OPA846ID THS4021ID voltage-feedback operational amplifier operational amplifier high-speed amplifier low-noise amplifier analog signal conditioner semiconductor gain-bandwidth product slew rate input voltage noise feedback network noise gain phase margin active filter communications receiver data acquisition test and measurement SOIC-8 surface mount RoHS REACH
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ