P1014NSE5FFA - QorIQ P1014 800MHz e500v2 MPU 425-TEPBGA | NXP
Référence : P1014NSE5FFA ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $38.5 | $38,50 |
| 10 | $35.2 | $352,00 |
| 100 | $31.75 | $3 175,00 |
| 500 | $28.4 | $14 200,00 |
| 1 000 | $25.1 | $25 100,00 |
P1014NSE5FFA Présentation
A communications processor is a specialized system-on-chip that combines one or more CPU cores with integrated peripherals and on-chip accelerators designed for networking infrastructure. The QorIQ family evolved from Freescale's (now NXP) PowerQUICC line, adding high-speed interfaces (USB, SATA, GbE, PCIe) and DDR3 memory controllers while keeping power consumption low. The P1014 sits in the entry-tier QorIQ P1 family alongside the P1010, balancing compute headroom with low power for fanless designs.
Key specifications include a 32-bit e500v2 core at 800 MHz, integrated SEC 4.x crypto engine, three 10/100/1000 Ethernet MACs (one RGMII + two SGMII), three PCIe Gen2 controllers, one USB 2.0 controller, one SATA 2.0 controller, and a 32-bit DDR3 memory controller with ECC. Memory interfaces include a 16-bit local bus and IFC for NAND/NOR flash. The 425-TEPBGA is a 19 mm x 19 mm fine-pitch wire-bond BGA designed for multilayer PCB stacks with low-impedance power delivery.
Typical applications include industrial gateways, factory-floor protocol converters, smart-grid energy routers, small-cell base stations, network-attached storage controllers, and IoT edge appliances requiring deterministic networking with hardware crypto offload. The SEC engine accelerates IPsec, SSL/TLS, and MACsec without burdening the e500 core.
Design considerations include careful power-rail sequencing (core and I/O domains are separate), thermal management through the package's center thermal balls, and impedance-controlled PCB stackup for DDR3, RGMII, and SGMII signaling. A board-level reference design from NXP's QorIQ development platform is recommended as a starting layout.
Alternatives de remplacement direct pour P1014NSE5FFA — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec P1014NSE5FFA (même facteur de forme et même empreinte) — différant par Operating Temperature, USB, SATA, Ethernet, Memory Controller.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
P1014NSE5HFB
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
P1014NSN5HFA
✅ Remplacement direct✓ En stock
$25.1 / unité
Voir la fiche technique →P1014NSE5FFA Valeurs maximales et caractéristiques électriques
| Processor Type | PowerPC e500v2 |
| Core Count | 1 |
| Core Architecture | 32-Bit Power Architecture |
| Core Frequency | 800 MHz |
| Température de fonctionnement | 0C to +105C |
| Boîtier / Format | 425-TEPBGA |
| Type de montage | Surface Mount |
| Packaging | Tray |
| Statut RoHS | RoHS Compliant |
| Lead Free Status | Lead Free |
| Ethernet MACs | 3 (1x RGMII + 2x SGMII) |
| PCIe Controllers | 3 x PCIe Gen2 |
| USB | 1 x USB 2.0 |
| SATA | 1 x SATA 2.0 |
| Memory Controller | 32-bit DDR3 with ECC |
| Security Engine | SEC 4.x (IPsec/SSL/MACsec acceleration) |
Guide de configuration des broches du P1014NSE5FFA 425-tepbga
Configuration des broches du P1014NSE5FFA (boîtier 425-tepbga). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour P1014NSE5FFA.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
P1014NSE5FFA convient pour 6 applications: Industrial Gateway & Protocol Converter, Smart Grid Energy Router, Small-Cell Base Station Controller, Network-Attached Storage (NAS) Controller, IoT Edge Appliance with Secure VPN, Industrial Firewall / UTM Appliance.
Industrial Gateway & Protocol Converter
The P1014NSE5FFA's 800 MHz e500v2 core, integrated SEC 4.x crypto engine, and trio of GbE MACs make it a strong fit for industrial gateways bridging Modbus/TCP, EtherNet/IP, and PROFINET traffic at the network edge. The 0C to 105C industrial temperature grade plus lead-free TEPBGA package support fanless DIN-rail enclosure designs in factory automation. Designers typically pair the P1014 with external RGMII PHYs and DDR3 with ECC to deliver deterministic, secure protocol translation.
Recommandé
Smart Grid Energy Router
The P1014NSE5FFA's hardware-accelerated IPsec/SSL/MACsec engine plus GbE and PCIe interfaces suit smart-grid energy routers that aggregate AMI data over VPN tunnels. The SEC engine offloads AES-GCM and RSA operations so the e500v2 core can dedicate cycles to metering and protocol parsing. DDR3 with ECC adds the SEU resilience required for utility substation deployments, while the 0C-105C junction range covers outdoor cabinets.
Recommandé
Small-Cell Base Station Controller
The P1014NSE5FFA's PCIe Gen2 lanes and SGMII Ethernet MACs enable a compact small-cell base-station controller board where the QorIQ handles L2 switching, S1/X2 signalling, and OAM while offloading crypto to the SEC engine. The 800 MHz e500v2 core runs Linux with the QorIQ SDK and supports the real-time scheduling needed for radio-resource management. SGMII allows direct attachment to small-cell RF front-end modules.
Recommandé
Network-Attached Storage (NAS) Controller
The P1014NSE5FFA's integrated SATA 2.0 host plus PCIe Gen2 and GbE MACs make it a fit for entry-level NAS controllers managing one or two SATA drives over a GbE link. The e500v2 core runs a lightweight NAS OS and the SEC engine accelerates SMB/Kerberos handshakes for authenticated file shares. DDR3 with ECC protects against bit-flips in always-on storage service scenarios.
Recommandé
IoT Edge Appliance with Secure VPN
The P1014NSE5FFA's SEC 4.x engine and PCIe-based Wi-Fi/5G modem attach points suit IoT edge appliances that aggregate sensor data and forward it securely over IPsec VPN to the cloud. The e500v2 core handles MQTT/CoAP protocol translation while the SEC engine encrypts payloads. USB 2.0 supports an external cellular modem and SATA can host local logging SSDs.
Recommandé
Industrial Firewall / UTM Appliance
The P1014NSE5FFA's GbE MACs and SEC engine deliver IPsec/SSL/MACsec acceleration in a unified-threat-management appliance for OT networks. Deep-packet inspection runs on the e500v2 core while the SEC engine handles AES-NI-equivalent bulk crypto, sustaining multi-Gbps tunnel throughput. The PCIe lane can host an expansion NIC for additional ports, and the 0C-105C grade supports DIN-rail mounting.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour P1014NSE5FFA — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | P1014NSE5HFB | P1014NSN5HFA |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 425-TEPBGA | 425-TEPBGA - same | 425-TEPBGA - same |
| Core Architecture | PowerPC e500v2 | PowerPC e500v2 | PowerPC e500v2 |
| Core Count | 1 | 1 | 1 |
| Operating Temperature | 0C to +105C | 0C to +105C | 0C to +105C |
| RoHS Status | Compliant | Compliant | Compliant |
| Security Engine | SEC 4.x | SEC 4.x | SEC 4.x |
| Ethernet MACs | 3 (1x RGMII + 2x SGMII) | 3 (1x RGMII + 2x SGMII) | 3 (1x RGMII + 2x SGMII) |
Principaux différenciateurs
- Highest-frequency QorIQ P1014 bin with full SEC 4.x engine (vs P1014NSN5HFA)
- Same package as P1014NSE5HFB enabling drop-in re-spin (vs P1014NSE5HFB)
- Integrated 3-port GbE + 3-port PCIe + SATA + USB on-chip (vs Discrete MPU + companion Ethernet switch)
Notes de conception
Estimated: The 425-TEPBGA at 19 mm body size typically uses a 0.8 mm ball pitch with 4-6 layer PCB stackup; the design must allocate at least 4 inner layers for ground and power planes under the package. Escape routing on the outer layers should use via-in-pad only with filled-and-capped vias to meet BGA reliability requirements. Matched-length DDR3 traces must keep delta within 25 mil and the impedance-controlled to 50 ohm single-ended.
The P1014 requires multiple voltage rails (core ~1.0 V, DDR3 I/O, SERDES analog, I/O) that must be sequenced per the QorIQ P1014 reference manual. Use a dedicated power-rail sequencer such as TPS3823 and verify that POR stays asserted until all rails are stable. Decoupling should place 0.1 uF X7R capacitors on every power pin within 2 mm of the BGA ball.
Estimated: At an ambient of 85C with 800 MHz CPU at full load, the 425-TEPBGA can dissipate ~3-5 W depending on peripheral activity; thermal balls at the package center should be soldered to a copper thermal pad with thermal vias to an inner heat-spreading plane. For fanless DIN-rail designs, plan at least 25 mm^2 of 2 oz copper directly under the thermal balls to keep junction below 105C.
Do not assume the P1014NSE5FFA and P1010NSE5HHB share the same ball map - verify against NXP's official pin-compatibility matrix before layout reuse. SERDES reference-clock jitter must stay under the limits in the QorIQ P1014 datasheet, otherwise PCIe/SGMII link training fails. Always validate DDR3 write-leveling across temperature corners before production release.
Informations de conformité
RoHS compliant and lead-free per NXP product page and DigiKey listing. Halogen-free and conflict-minerals status not stated in the verified web data.
