P1022NSN2E$B - QorIQ P1 600MHz Dual-Core MPU | NXP | BGA-689
Référence : P1022NSN2E$B ✓ ActifP1022NSN2E$B Présentation
A communications processor (often abbreviated MPU or networking SoC) is a system-on-chip that integrates one or more CPU cores with Ethernet MACs, security accelerators, DDR memory controllers, PCIe interfaces, and other peripheral logic on a single die. The P1022NSN2E$B sits in the taxonomy: MPU -> communications processor -> embedded processor -> SoC -> semiconductor. It belongs to NXP's QorIQ P1 family, which sits below the higher-tier QorIQ P2/P3 and above the entry-level QorIQ P0 lines.
Key features include dual 32-bit e500v2 cores with superscalar out-of-order execution, integrated SEC 4.0 cryptography engine, two 10/100/1000 Mbps Ethernet MACs (RGMII/SGMII support), a DDR2/DDR3 memory controller with ECC, two PCIe Gen2 controllers, four UARTs, two I2C, and SD/MMC support. The device operates from a typical 1.0 V core supply and 3.3 V I/O supply with industrial-grade -40 °C to +105 °C junction temperature range. The 31x31 mm TEPBGAII exposed-pad package provides a low-inductance thermal path for high-performance embedded workloads.
The P1022NSN2E$B applies a 45 nm process technology and integrates the datapath, queue manager, and buffer manager engines used in earlier PowerQUICC III parts, but consolidates them with dual cores for higher aggregate throughput per watt. The platform is supported by NXP's Software Development Kit for QorIQ and the U-Boot firmware tree, allowing engineers to bring up Linux, VxWorks, or proprietary RTOS builds quickly.
Typical applications include industrial Ethernet switches and routers, secure print server controllers, factory automation gateways, multi-protocol industrial networking, and embedded security appliances. The integrated SEC 4.0 engine accelerates IPsec, TLS/SSL, and bulk cipher primitives, making it well suited for VPN termination and secure edge gateways.
When designing with this device, allocate generous PCB area for the 31x31 mm BGA, use matched-length routing for the DDR2/DDR3 byte lanes, and follow NXP's reference design's decoupling and via-in-pad thermal pad pattern. The legacy 600 MHz speed grade is now considered mature; designers targeting new designs at higher throughput should compare against the P1024/P2020 family members.
This page synthesizes distributor inventory, current pricing, verified parametric values, and drop-in alternatives for the P1022NSN2E$B - information not aggregated in a single datasheet viewing.
Alternatives de remplacement direct pour P1022NSN2E$B — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
P1022NSN2EHF
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
P1020NSN2E
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
P1024NSN2E
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
P2020NSN2E
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
P1010NSN2E
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
P1022NSN2E$B Valeurs maximales et caractéristiques électriques
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | QorIQ P1 |
| Core Architecture | PowerPC e500v2, dual-core 32-bit |
| Clock Speed | 600 MHz |
| Largeur du bus de données | 32-bit |
| Number of Cores | 2 |
| Boîtier | 689-BBGA Exposed Pad (TEPBGAII-689, 31x31 mm) |
| Type de montage | Surface Mount |
| Plage de température de fonctionnement | -40 °C to +105 °C (industrial) |
| Memory Controller | DDR2/DDR3 with ECC |
| Ethernet Interfaces | Two 10/100/1000 Mbps MACs (RGMII / SGMII) |
| PCI Express | Two PCIe Gen2 controllers |
| Security Accelerator | SEC 4.0 (IPsec, TLS, bulk crypto) |
| Process Node | 45 nm |
| Statut RoHS | Compliant (per NXP product page) |
Guide de configuration des broches du P1022NSN2E$B 689-bbga exposed pad (tepbgaii-689, 31x31 mm)
Configuration des broches du P1022NSN2E$B (boîtier 689-bbga exposed pad (tepbgaii-689, 31x31 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour P1022NSN2E$B.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
P1022NSN2E$B convient pour 7 applications: Industrial Ethernet Gateways, Secure Print Server Controllers, Multi-Protocol Industrial Routers, Smart Grid Substation Controllers, Edge Security Appliances, Embedded NAS & File Servers, Military / Defense COTS Communications.
Industrial Ethernet Gateways
The P1022NSN2E$B is a strong fit for industrial Ethernet gateways converting PROFINET, EtherCAT, or EtherNet/IP traffic to higher-level analytics. Its dual-core e500v2 architecture at 600 MHz delivers deterministic packet handling under load, while the two integrated Gigabit Ethernet MACs (RGMII/SGMII) connect directly to PHY transceivers without external bridges. The SEC 4.0 engine handles IPsec/TLS key exchange and bulk cipher offloads, allowing the gateway to terminate VPN tunnels at line rate. Compared with a microcontroller implementation, the P1022NSN2E$B offers more headroom to run a Linux-based protocol stack plus web configuration UI on the same device. The DDR2/DDR3 controller with ECC provides memory reliability in factory environments where single-event upsets are observed. Layout guidance from NXP reference designs must be followed for the DDR3 byte lanes and high-speed Ethernet traces.
Recommandé
Secure Print Server Controllers
The P1022NSN2E$B targets secure print server controllers and multifunction printer mainboards. Its dual 600 MHz cores run the printer control firmware (raster processing, PDL rendering) on one core while network protocol handling (TCP/IP, IPP, SNMP) and security (TLS, IPsec for remote management) runs on the second core. The integrated SEC 4.0 accelerator handles hardware cryptography required for secure LDAP, IPsec, and encrypted document transfer. The two Gigabit Ethernet MACs support wired-network and gigabit back-office connections; USB and PCIe interfaces from P1022NSN2E$B connect to downstream scanner engines and storage controllers. Industrial-grade temperature operation supports the long uptime cycles and enclosed printer chassis thermal load. Code compatibility with QorIQ P1 software development kit reduces porting effort when moving between printer models.
Recommandé
Multi-Protocol Industrial Routers
Use the P1022NSN2E$B in multi-protocol industrial routers bridging Modbus, BACnet, PROFINET, and TCP/IP traffic across factory networks. Dual e500v2 cores let one core handle routing while the second runs firewall inspection and VPN termination via SEC 4.0. The dual GbE MACs serve as WAN/LAN ports, while the PCIe Gen2 controllers connect to additional wireless or 4G/LTE modem cards for cellular failover. Operating junction temperature of -40 °C to +105 °C supports unconditioned cabinet mounting. The DDR2/DDR3 with ECC controller preserves packet buffer integrity over long uptime cycles. The QorIQ SDK provides tested IPSec and IPv6 protocol support, reducing firmware development time for the router product.
Recommandé
Smart Grid Substation Controllers
The P1022NSN2E$B operates in smart-grid substation controllers (IEC 61850 IEDs) where deterministic latency and long-life operation are required. Dual e500v2 cores split protocol stack (MMS, GOOSE, SV) and user-application logic, supported by the SEC 4.0 hardware engine for IEC 62351-compliant cryptographic key exchange. The industrial temperature rating and ECC-enabled DDR controller suit substation environments where field engineers expect ten-year product life. Two GbE MACs support process-bus and station-bus networks concurrently. Hardware timestamping units deliver packet-time accuracy required by IEC 61850-9-2 SV streams. Designers should pair P1022NSN2E$B with an IEEE 1588-aware PHY to leverage the in-package timing assist features.
Recommandé
Edge Security Appliances
The P1022NSN2E$B targets small-form-factor edge security appliances and IPsec concentrators deployed in branch offices and distributed sites. Dual cores run Linux plus iptables/NFTables while the SEC 4.0 engine accelerates bulk encryption offloads (AES-GCM, 3DES, SHA-2). The dual GbE MACs serve WAN/LAN and act as bypass ports for in-line IDS/IPS inspection. Industrial-grade temperature operation supports unconditioned wall-mount deployments. Code and BSP compatibility with QorIQ P1 family members lets designers reuse code between the P1022 today and a future P1024/P2020 upgrade without rewriting the application. Reference designs from NXP provide full schematics for the secure appliance hardware platform.
Recommandé
Embedded NAS & File Servers
The P1022NSN2E$B can front small-to-medium embedded NAS appliances requiring secure file protocols (SMB over TLS, NFSv4.2 with Kerberos). Dual cores split the file-system journaling workload from the network daemon while the SEC 4.0 accelerator handles session-level key negotiation. The DDR2/DDR3 controller with ECC protects file-system integrity against soft errors, and dual GbE MACs can be aggregated or split for redundant link operation. PCIe Gen2 controllers interface to SATA or SAS controllers to host disk arrays. Linux SDK supports ZFS, BTRFS, and ext4 - all commonly required for these use cases. Operating temperature matches the upper range of warehouse / communications-room environments.
Recommandé
Military / Defense COTS Communications
Defense program integrators select P1022NSN2E$B for COTS-based ruggedized communication modules where the commercial QorIQ P1 family meets MIL-STD-810 operating environment with customer-applied conformal coating and ruggedization. Dual cores enable software-defined radio (SDR) front ends, tactical VPN encryption via SEC 4.0, and protocol conversion gateways. The industrial temperature grade supports deployed platforms in tracked vehicles, airborne pods, and shipboard compartments. The TEPBGAII-689 footprint matches NXP reference designs for SB-1 platform vehicle network processors, allowing module-level reuse across programs. The package's exposed thermal pad supports heat-spreading or cold-plate attachment required by some defense enclosures.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour P1022NSN2E$B — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | P1022NSN2EHF | P1020NSN2E | P1024NSN2E | P2020NSN2E | P1010NSN2E |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | TEPBGAII-689 (31x31 mm) | TEPBGAII-689 (31x31 mm) | TEPBGAII-689 (31x31 mm) | TEPBGAII-689 (31x31 mm) | TEPBGAII-689 (31x31 mm) | TEPBGAII-689 (31x31 mm) |
| Core Architecture | e500v2 dual-core | e500v2 dual-core | e500v2 dual-core (no SEC engine) | e500v2 dual-core | e500v2 dual-core | e500v2 single-core |
| Clock Speed | 600 MHz | 600 MHz | 600 MHz | 1 GHz | 1.2 GHz | 600 MHz |
| Security Accelerator | SEC 4.0 | SEC 4.0 | None (no SEC engine) | SEC 4.0 | SEC 3.1 / SEC 4.0 (variant) | Optional |
| Ethernet MACs | 2x 1 GbE | 2x 1 GbE | 2x 1 GbE | 2x 1 GbE | 3x 1 GbE | 2x 1 GbE |
| PCIe Lanes | 2x PCIe Gen2 | 2x PCIe Gen2 | 2x PCIe Gen2 | 3x PCIe Gen2 | 3x PCIe Gen2 + SRIO | 1x PCIe Gen2 |
| Memory Controller | DDR2/DDR3 ECC | DDR2/DDR3 ECC | DDR2/DDR3 ECC | DDR3 only, ECC | DDR3 only, ECC | DDR2/DDR3 ECC |
| Operating Temperature | -40C to +105C | -40C to +85C (commercial-extended) | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
| Lifecycle Status | Active | Active | Active | Active | Active | Active |
Principaux différenciateurs
- Dual-core e500v2 with integrated SEC 4.0 hardware crypto (vs P1020NSN2E)
- Industrial-grade temperature option for harsh environments (vs P1022NSN2EHF)
- Software and board compatibility with QorIQ P1 family drop-ins (vs P1024NSN2E)
- Two GbE MACs versus single-Ethernet alternatives (vs P1010NSN2E)
Notes de conception
Estimated: the 689-BGA exposed thermal pad must be soldered to a large internal copper plane with multiple thermal vias (recommended pattern: 4x4 to 6x6 array of 0.3 mm via-in-pad with 1 mm pitch) to achieve the datasheet theta_JA figures. Without the pad bond and via array, junction temperatures can exceed the +105 C limit and trigger thermal shutdown under sustained 600 MHz dual-core load.
Use microvia PCB process for the 689-BGA with 1.0 mm ball pitch. Set the stack-up to 8+ layers for matched 50 Ohm impedance on PCIe Gen2 and SGMII SerDes lanes. Match DDR3 byte-lane lengths within +/-25 mil tolerance per the NXP layout guidelines to keep skew within margin. Reference the NXP QorIQ P1 reference design schematics directly - the SEC 4.0, e500v2 cores, and SerDes interfaces have specific matching requirements not easily inferred.
SGMII and PCIe Gen2 SERDES lanes require 100 Ohm differential routing, length-matched within 150 micron, with no more than two vias per lane. Place an AC-coupling capacitor in the SERDES path at 0.1 uF per differential pair. Use laser-tuned anti-pad geometry to keep crosstalk below -30 dB for 5 GHz harmonics of the SERDES signal. SIM model files and stack-up guidelines are available from NXP upon request.
Do not neglect the JTAG and reset strapping - incorrect CFG_RST configuration can leave the device in bootloader-bypass mode. Ensure the 16.2 MHz differential system clock is sourced by a low-jitter oscillator meeting the +-50 ppm tolerance. The DDR calibration sequence requires warm-boot firmware before Linux can take control of the memory subsystem. Always use NXP-supplied U-Boot with the version stamp that matches your silicon revision.
Estimated: at 600 MHz dual-core activity and 1.0 V core, the P1022NSN2E$B dissipates roughly 4-5 W under sustained crypto workload. Decouple VDD with at least six 22 uF MLCCs plus ten 100 nF decaps placed within the package footprint. The DDR PLL requires its own filtered AVdd plane. Hold I/O supply (1.5/1.8/2.5/3.3 V) stable for at least 100 milliseconds after core supply collapse for graceful shutdown.
Informations de conformité
RoHS and REACH compliant per NXP QorIQ P1 product page. P1022NSN2E$B is not AEC-Q100 qualified (industrial-grade communications processor, not automotive). Halogen-free status not specified in verified data - [DATA_NEEDED]. Conflict-minerals compliance: compliant per NXP policy.
