P2040NSN7FLC - QorIQ Quad-Core 667MHz SoC, FCPBGA-780 | NXP
Référence : P2040NSN7FLC ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $47.03 | $47,03 |
| 10 | $44.2 | $442,00 |
| 100 | $41 | $4 100,00 |
| 500 | $38.5 | $19 250,00 |
| 1 000 | $36.75 | $36 750,00 |
P2040NSN7FLC Présentation
A QorIQ SoC is a multi-core communications processor that combines CPU cores, cache coherency fabric, and high-speed serial interfaces (SerDes) on a single die. It sits in the hierarchy: SoC -> microprocessor -> communications processor -> embedded processor -> semiconductor, and is widely used in routers, switches, and line cards where deterministic packet throughput and hardware offload matter as much as raw compute. The P2040 extends the high-end P4080/P4040 architecture down into the mid-range quad-core space while preserving software compatibility with P1, P3, P4, and P5 families.
Key features include four e500mc cores at 667 MHz, a 256 KB shared L2 backside cache per cluster, integrated DDR3/DDR3L controller with ECC support, four x4 Serial RapidIO (SRIO) controllers, two PCIe Gen2 controllers, two SATA 2.0 controllers, and four Gigabit Ethernet MACs supporting 1 GbE and 10 GbE operation. The device supports hardware virtualization, queuing, and parse/classify/distribute acceleration, offloading critical networking tasks from the cores.
The 780-pin FCPBGA (23x23 mm) package exposes a high-lane-count SerDes interface that delivers up to 30 Gbps of aggregate I/O bandwidth. The 45 nm process technology balances performance and power, with the P2040NSN7FLC variant specified for 0 C to 105 C operation and is a Rev 2 silicon revision.
Typical applications include enterprise routers and switches, network attached storage (NAS), security appliances, industrial control platforms, and military/aerospace embedded computing. P2040 and P2041 are pin-compatible within the same 23 x 23 mm package, allowing designers to scale performance by swapping the SoC without board rework.
When designing with this part, plan the PCB stack-up and power-rail sequencing carefully: the FCPBGA-780 package requires high-layer-count boards (typically 10+ layers) with matched-length SerDes routing. Thermal management is also critical at full 667 MHz across four cores - a heatsink or thermal pad is normally mandatory.
This page synthesizes authorized distributor pricing, Rev 2 silicon variants, and pin-compatible P2041 alternatives that are not consolidated on a single NXP product page.
Alternatives de remplacement direct pour P2040NSN7FLC — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec P2040NSN7FLC (même facteur de forme et même empreinte) — différant par Mounting Type, Operating Temperature, Architecture, Core Frequency, Ethernet.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
P2041NSN7FLC
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
P2040NSN7KLC
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$132 / unité
Voir la fiche technique →P2041NSE7FLC
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
P2041NSN7MMC
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$305 / unité
Voir la fiche technique →P2040NSN7HLC
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
P2040NSE7FLC
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
P2040NSN7FLC Valeurs maximales et caractéristiques électriques
| Architecture | Power Architecture e500mc |
| Core Count | 4 |
| Maximum Core Frequency | 667 MHz |
| Data Width | 32-bit |
| Series | QorIQ P2 |
| Boîtier | 780-FCPBGA (23 x 23 mm) |
| Température de fonctionnement | 0 C to 105 C |
| Supply Voltages | 1.5 V / 1.8 V / 2.5 V / 3.3 V |
| DDR Memory Support | DDR3 / DDR3L with ECC |
| PCIe Controllers | 2 x PCIe Gen2 |
| SRIO Controllers | Yes (Serial RapidIO) |
| SATA Controllers | Yes (SATA 2.0) |
| Ethernet MACs | 1 GbE / 10 GbE capable |
| Silicon Revision | Rev 2 |
| Type de montage | Surface Mount (BGA) |
| Process Technology | 45 nm |
Guide de configuration des broches du P2040NSN7FLC 780-fcpbga (23 x 23 mm)
Configuration des broches du P2040NSN7FLC (boîtier 780-fcpbga (23 x 23 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour P2040NSN7FLC.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
P2040NSN7FLC convient pour 6 applications: Enterprise Routers and Switches, Network Attached Storage (NAS), Security Appliances (UTM, VPN, Firewall), Industrial Control and Automation Gateways, Military and Aerospace Embedded Computing, Wireless Infrastructure Baseband.
Enterprise Routers and Switches
The P2040NSN7FLC fits enterprise routers and switches because it combines four e500mc cores at 667 MHz with hardware parse/classify/distribute acceleration and multi-port SerDes I/O. Its four SerDes lanes can be muxed into PCIe Gen2 for switch fabrics, SRIO for backplane interconnect, and XAUI/XFI 10 GbE for uplinks, delivering deterministic throughput without external NPUs. The QorIQ software stack (Linux, VxWorks, QNX) and P1/P3/P4/P5 source compatibility reduce porting effort versus proprietary network processors, while the 780-FCPBGA 23x23 mm package keeps the BOM compact for fixed-configuration chassis.
Recommandé
Network Attached Storage (NAS)
NAS appliances benefit from the P2040NSN7FLC's quad-core compute density combined with dual SATA 2.0 controllers and 1/10 GbE MACs. One pair of cores can serve NFS/SMB file-system protocols while another pair handles RAID 5/6 software reconstruction or hardware-accelerated checksum offload. The integrated DDR3/DDR3L controller with ECC provides the memory bandwidth needed for sequential read/write workloads, and the two PCIe Gen2 ports allow connection to external SAS/SATA controllers or 10 GbE NICs without burdening the cores.
Recommandé
Security Appliances (UTM, VPN, Firewall)
Security appliances leverage the P2040NSN7FLC's hardware virtualization and queuing engines to isolate VPN, IPS, and firewall data planes per core. Four e500mc cores at 667 MHz can sustain multi-Gbps IPsec AES throughput when paired with the integrated SEC crypto accelerator (available on this QorIQ family), and the PCIe Gen2 lanes support external crypto or NIC cards. The 0-105 C junction range accommodates fanless industrial chassis where firewall appliances are deployed in wiring rooms or industrial cabinets.
Recommandé
Industrial Control and Automation Gateways
Industrial gateway designs use the P2040NSN7FLC to aggregate multiple fieldbus protocols (EtherCAT, PROFINET, Modbus TCP) onto enterprise Ethernet or cellular uplinks. The dual SRIO controllers provide deterministic backplane connectivity to I/O modules, while the multi-port GbE/10 GbE MACs handle uplink aggregation. QorIQ's hard real-time extensions on e500mc and the 0-105 C industrial temperature grade make the part a fit for factory-floor PLCs, SCADA gateways, and smart-grid RTUs.
Recommandé
Military and Aerospace Embedded Computing
Defense and aerospace platforms rely on the P2040NSN7FLC for single-board computers (SBCs) and VPX cards where Power Architecture software reuse from P1/P3/P4/P5 families shortens qualification timelines. The 45 nm process and 0-105 C specification fit manned avionics bays and ground-vehicle electronics, while the multi-protocol SerDes (PCIe, SRIO, XAUI) supports OpenVPX fabric profiles. Software compatibility with the broader QorIQ family lets integrators scale software across P2040 VPAs and P4080 high-end boards without rewriting BSPs.
Recommandé
Wireless Infrastructure Baseband
Small-cell and 5G baseband units use the P2040NSN7FLC because its quad-core layout and multi-lane SerDes can partition baseband, L2/L3, and fronthaul processing across cores. The integrated SRIO and PCIe Gen2 connect to DSP/FPGA co-processors for PHY acceleration, while the XAUI/XFI interfaces carry fronthaul CPRI or backhaul Ethernet. QorIQ's mature Linux and real-time OS support and its P1/P3/P4/P5 source compatibility shorten carrier-grade software certification cycles.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour P2040NSN7FLC — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | P2041NSN7FLC | P2040NSN7KLC | P2041NSE7FLC | P2041NSN7MMC | P2040NSN7HLC | P2040NSE7FLC |
|---|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 780-FCPBGA (23x23 mm) | 780-FCPBGA (23x23 mm) - same | 780-FCPBGA (23x23 mm) - same | 780-FCPBGA (23x23 mm) - same | 780-FCPBGA (23x23 mm) - same | 780-FCPBGA (23x23 mm) - same | 780-FCPBGA (23x23 mm) - same |
| Core Count | 4 x e500mc | 4 x e500mc | 4 x e500mc | 4 x e500mc | 4 x e500mc | 4 x e500mc | 4 x e500mc |
| Maximum Core Frequency | 667 MHz | 667 MHz | 667 MHz | 667 MHz | 667 MHz | 667 MHz | 667 MHz |
| Operating Temperature | 0 C to 105 C | 0 C to 105 C | 0 C to 105 C | -40 C to 105 C (extended) | 0 C to 105 C | 0 C to 105 C | -40 C to 105 C (extended) |
| Silicon Revision | Rev 2 | Rev 2 | Rev 2 | Rev 2 | Rev 2 | Rev 2 | Rev 2 |
| DDR Memory Support | DDR3 / DDR3L with ECC | DDR3 / DDR3L with ECC | DDR3 / DDR3L with ECC | DDR3 / DDR3L with ECC | DDR3 / DDR3L with ECC | DDR3 / DDR3L with ECC | DDR3 / DDR3L with ECC |
| PCIe / SRIO / SATA / GbE | PCIe Gen2 / SRIO / SATA 2.0 / 1-10 GbE | PCIe Gen2 / SRIO / SATA 2.0 / 1-10 GbE | PCIe Gen2 / SRIO / SATA 2.0 / 1-10 GbE | PCIe Gen2 / SRIO / SATA 2.0 / 1-10 GbE | PCIe Gen2 / SRIO / SATA 2.0 / 1-10 GbE | PCIe Gen2 / SRIO / SATA 2.0 / 1-10 GbE | PCIe Gen2 / SRIO / SATA 2.0 / 1-10 GbE |
| Lifecycle Status | End of Life | End of Life | End of Life | End of Life | End of Life | End of Life | End of Life |
Principaux différenciateurs
- Pin-compatible upgrade path to P2041 (vs P2041NSN7FLC)
- Software compatibility with broader QorIQ family (vs P4080)
- Industrial temperature (0 to 105 C) variant available (vs P2040NSE7FLC)
Notes de conception
The P2040NSN7FLC dissipates significant power at 667 MHz across four cores in the 780-FCPBGA package. Theta-JA values for the 23 x 23 mm FCPBGA are typically in the 10-15 C/W range on a standard 10-layer JEDEC board; at full load this can drive junction temperature near the 105 C limit. Mandatory: attach a heatsink or thermal pad with at least 30 x 30 mm footprint and 1 m/s airflow. Estimated: with 4 active cores at 1.0 V core and 667 MHz, internal dissipation is approximately 8-12 W, so a passive heatsink alone is insufficient for sustained 4-core workloads.
The 780-ball FCPBGA at 23 x 23 mm has a 1 mm pitch and requires a high-layer-count PCB stack-up (typically 10+ layers) with matched-length SerDes routing. Power-plane decoupling must include a 1.0 V core rail with bulk plus 0.1 uF high-frequency bypass per pin pair. Reference the NXP QorIQ P2040 Hardware Specifications document and the NXP board-design package for stack-up templates, ball maps, and DC-bias recommendations before tape-out.
Do not assume P2040NSN7FLC and P2041 are interchangeable in software: the larger L2 cache and additional accelerators on P2041 can change cache-coherency timing and may affect real-time OS tick scheduling. Validate BSP and any real-time extensions against the target silicon revision. Also verify Rev 2 errata against your Linux kernel version because some PCIe Gen2 hot-plug behaviors were corrected between Rev 1 and Rev 2.
Informations de conformité
Compliance status not explicitly listed in the verified web data. P2040NSN7FLC is an industrial/communications SoC, not an automotive-grade part, so AEC-Q100 is not applicable. RoHS, REACH, lead-free, and halogen-free status must be verified against the NXP environmental quality documentation on the official product page before use in RoHS-constrained designs.
