P2041NXN1MMB - QorIQ P2041 Quad-Core 1.2GHz PowerPC MPU | NXP
Référence : P2041NXN1MMB ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $216.82 | $216,82 |
| 10 | $199.5 | $1 995,00 |
| 100 | $178.4 | $17 840,00 |
| 500 | $165.2 | $82 600,00 |
| 1 000 | $152.75 | $152 750,00 |
P2041NXN1MMB Présentation
What is a QorIQ communications processor? A QorIQ communications processor is a multicore system-on-chip designed for networking, telecom, and embedded data-plane workloads. It sits within the broader embedded microprocessor taxonomy (MPU -> SoC -> communications processor -> multicore SoC). QorIQ platforms integrate CPU cores, high-speed I/O (SerDes, Ethernet MACs, PCIe, SATA), security engines, and memory controllers on a single die to deliver deterministic throughput for packet processing, industrial control, and secure routing. The P2 series (P2040/P2041) brings high-end datapath acceleration originally pioneered in P4 silicon into a low-to-mid power envelope, enabling cost-sensitive fanless designs.
Key features include four PowerPC e500mp cores with hardware hypervisor support, integrated 45 nm process technology, dual memory controllers for DDR3/DDR3L with ECC, three PCIe Gen2 controllers, ten Gigabit Ethernet ports, and an SoC security engine (SEC 4.0). The device operates across -40C to +105C industrial temperature range, making it suitable for harsh environments. On-chip accelerators include QUICC Engine technology, DPAA-style packet handling primitives, and pattern-matching for IPSec and deep packet inspection.
Typical applications span enterprise routers, industrial Ethernet switches, LTE base station baseband, secure network appliances, factory automation controllers, and single-board computers for aerospace/defense. The combination of four cores at 1.2 GHz, hardware virtualization, and security offload makes the P2041 a strong fit for multi-service access nodes and embedded intelligent edge platforms.
When designing with the P2041, allocate adequate PCB area for the 780-ball FCBGA and use at least 6 layers with matched-impedance routing for DDR3 traces. Thermal design must dissipate up to approximately 12 W under full quad-core load - a heatsink plus thermal interface material and adequate airflow are typically required. Power sequencing requires a NXP-compatible VRM solution that supports the core and platform voltage rails within the SOF specification.
This page synthesizes distributor availability, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
Alternatives de remplacement direct pour P2041NXN1MMB — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec P2041NXN1MMB (même facteur de forme et même empreinte) — différant par Core Architecture, Mounting Type.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
P2040NXN1MMB
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
P2041NXE1MMB
✅ Remplacement direct✓ En stock
$188.49 / unité
Voir la fiche technique →P2041NXN1MMB-G
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
P2040NXE1MMB
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
P2020NXE2MMB
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
P2041NXN7MMB
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
P2041NXN1MMB Valeurs maximales et caractéristiques électriques
| Series | QorIQ P2 |
| Part Status | Active |
| Core Processor | PowerPC e500mc |
| Number of Cores | 4 |
| Core Architecture | 32-Bit |
| Speed | 1.2 GHz |
| Température de fonctionnement | -40C to +105C |
| Boîtier / Format | 780-FCBGA (23x23) |
| Type de montage | Surface Mount |
| Connectivity | Ethernet, I2C, PCIe, SPI, UART, USB |
| Ethernet | 10-Gigabit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3, DDR3L with ECC |
| Security Features | SEC 4.0, Trust Architecture |
| Statut RoHS | Compliant |
| Lead-Free | Yes |
Guide de configuration des broches du P2041NXN1MMB 780-fcbga (23x23)
Configuration des broches du P2041NXN1MMB (boîtier 780-fcbga (23x23)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour P2041NXN1MMB.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
P2041NXN1MMB convient pour 6 applications: Enterprise Router & Branch Gateway, Industrial Managed Ethernet Switch, LTE Small-Cell Base Station, Network Security Appliance (Firewall/UTM), Single-Board Computer for Aerospace/Defense, Industrial IoT Edge Gateway.
Enterprise Router & Branch Gateway
The P2041NXN1MMB's four e500mc cores at 1.2 GHz, integrated SEC 4.0 engine, and multiple 10 Gigabit Ethernet SerDes lanes make it a strong fit for branch-office routers and SD-WAN gateways. Placed as the central CPU, it terminates IPSec and SSL/TLS tunnels via the SEC 4.0 accelerators while the QUICC Engine handles legacy TDM/T1/E1 interfaces for hybrid WAN connectivity. The dual DDR3 with ECC controller feeds multi-gigabit packet buffers for line-rate forwarding across the multi-core datapath.
Recommandé
Industrial Managed Ethernet Switch
The P2041NXN1MMB drives managed industrial Ethernet switches running ring redundancy protocols, ACLs, and time-sensitive networking features. Its quad-core architecture dedicates one core to Layer 2 forwarding, one to Layer 3 routing, one to management/CLI, and one to security/policy enforcement, with hardware virtualization isolating each workload. The -40C to +105C industrial temperature rating and SEC 4.0 trust architecture suit substation, factory-floor, and roadside cabinet deployments where reliability and tamper resistance are mandatory.
Recommandé
LTE Small-Cell Base Station
LTE small-cell baseband and PHY processing map directly onto the P2041NXN1MMB's combination of quad-core compute, hardware pattern matching, and high-throughput memory. The MAPLE baseband accelerator (where present on P2041 variants) handles turbo decoding and crest-factor reduction, freeing CPU cores for L2/L3 scheduling. The integrated SEC engine secures S1 and X2 interfaces. Compared with generic ARM SoCs, the P2041NXN1MMB offers deterministic interrupt latency and NEON-class signal processing throughput at lower BOM cost.
Recommandé
Network Security Appliance (Firewall/UTM)
Unified Threat Management (UTM) appliances leverage the P2041NXN1MMB's SEC 4.0 engine to accelerate deep-packet inspection, IPSec VPNs, and SSL decryption at line rate. The four e500mc cores run multiple virtualized firewall instances under the hardware hypervisor, allowing isolated per-tenant security domains on a single chip. Dual DDR3 controllers feed content-addressable memory and pattern-matching tables for intrusion-detection signatures, while the hardware random number generator and secure boot support cryptographic key protection.
Recommandé
Single-Board Computer for Aerospace/Defense
Ruggedized VPX or VME single-board computers for aerospace and defense systems pair the P2041NXN1MMB with VPX backplane connectivity, ECC-protected DDR3 memory, and secure-boot chains. The PowerPC architecture has a long heritage in defense platforms, and the P2041 retains software compatibility with P1, P3, P4 and P5 families - critical for programs that need to migrate legacy firmware onto modern quad-core silicon without rewriting drivers. The SEC 4.0 engine supports military-grade crypto algorithms.
Recommandé
Industrial IoT Edge Gateway
Industrial IoT edge gateways aggregate Modbus, PROFINET, EtherCAT, and OPC-UA traffic before forwarding to cloud platforms. The P2041NXN1MMB runs containerized workloads on its virtualized cores while the QUICC Engine handles legacy industrial protocols and PCIe Gen 2 connects to Wi-Fi 6 or 5G modem cards. Hardware isolation between IT and OT traffic segments protects the OT side from compromised IT workloads, and the extended temperature range suits cabinet-mounted installations on factory floors.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour P2041NXN1MMB — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | P2040NXN1MMB | P2041NXE1MMB | P2040NXE1MMB | P2020NXE2MMB |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 780-FCBGA (23x23) | 780-FCBGA (23x23) - same | 780-FCBGA (23x23) - same | 780-FCBGA (23x23) - same | 780-FCBGA (23x23) - same |
| Number of Cores | 4 (e500mc) | 4 (e500mc) | 4 (e500mc) | 4 (e500mc) | 2 (e500) |
| Clock Speed | 1.2 GHz | 1.2 GHz | 1.2 GHz | 1.2 GHz | 1.2 GHz |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +125C | -40C to +125C | -40C to +125C |
| Security Engine | SEC 4.0 | Reduced | SEC 4.0 | Reduced | Reduced |
| Memory Controller | DDR3/DDR3L with ECC | DDR3/DDR3L with ECC | DDR3/DDR3L with ECC | DDR3/DDR3L with ECC | DDR3 with ECC |
| PCIe Controllers | 3 x PCIe Gen 2 | 3 x PCIe Gen 2 | 3 x PCIe Gen 2 | 3 x PCIe Gen 2 | 3 x PCIe Gen 2 |
| Ethernet Ports | Up to 10 GbE | Up to 10 GbE | Up to 10 GbE | Up to 10 GbE | Up to 10 GbE |
| Pin Count | 780 | 780 - same | 780 - same | 780 - same | 780 - same |
Principaux différenciateurs
- Full security engine enabled vs reduced security on P2040 (vs P2040NXN1MMB)
- Quad-core e500mc with hardware virtualization vs dual-core e500 without (vs P2020NXE2MMB)
- Industrial -40C to +105C vs commercial 0C to +70C variants (vs P2041NXP1MMB (commercial grade))
Notes de conception
The 780-FCBGA (23x23) package requires a high-density PCB stackup - minimum 6 layers with microvia or laser-drilled vias for breakout. Use the NXP QorIQ P2 design-in checklist for ball-escape routing and matched-impedance DDR3 trace length matching (within 25 ps skew per byte lane). Estimated: power-plane stackup should provide at least 1 oz copper on outer layers with 0.5 oz inner planes to handle the ~12 W power dissipation at full quad-core load.
At full quad-core 1.2 GHz load the P2041NXN1MMB dissipates approximately 8-12 W and requires a heatsink plus 100 LFM minimum airflow per the NXP thermal application note. Estimated: junction-to-ambient thermal resistance of the bare FCBGA package is in the 12-15 C/W range, so with a quality thermal interface material and moderate heatsink the assembly can hold Tj under 105C for industrial environments. Monitor Tj via the on-chip thermal diode during board bring-up.
Power sequencing follows the NXP QorIQ P2 SOF specification with platform, core, and DDR rails coming up in a defined order. Use a NXP-recommended VRM controller such as the MMPF0100 or equivalent adaptive PMIC. Estimating core current at 1.2 GHz operation: roughly 6-8 A peak per core, so the VRM must deliver 25-30 A sustained on the core rail. Inrush and bypass capacitance requirements follow the QorIQ P2 hardware specifications guide.
Do not confuse P2041 (e500mc, 4 cores) with P2020 (e500, 2 cores) when ordering - both come in 780-FCBGA but are not performance-compatible. Also verify firmware revision: P2041NXN1MMB (N1) vs P2041NXN7MMB (N7) reference different errata masks. Read the NXP QorIQ P2 errata document before committing to a revision for production. SEC 4.0 features are only fully enabled on the P2041; P2040 has a reduced security engine.
Informations de conformité
RoHS compliant per NXP product page and DigiKey listing. AEC-Q100 not applicable (MPU, not automotive grade). Conflict-mineral reporting compliant per NXP corporate policy.
