P5021NXE7TMC - QorIQ Dual-Core 1.8GHz SoC | NXP Semiconductors
Référence : P5021NXE7TMC ⚠ Dernier achatP5021NXE7TMC Présentation
A QorIQ P5 family device is a 64-bit Power Architecture (formerly PowerPC) communications processor that combines general-purpose cores with integrated networking peripherals (Ethernet, PCIe, SATA, USB, SerDes) and a hardware security engine. The P5 family sits in NXP's broader QorIQ communications processor hierarchy between the entry-level P1/P3 families and the high-end P4080/T series. The dual-core P5021 occupies a middle position in this family, sharing software and pinout compatibility with the quad-core P5040, the single-core P5010, and the dual-core P5020, allowing a single PCB to scale from one to four cores simply by swapping the BGA.
Key features of the P5021NXE7TMC include dual e5500 cores at 1.8 GHz, support for DDR3 / DDR3L memory with ECC, integrated 1/10 Gigabit Ethernet MACs, multiple PCI Express Gen2 controllers, SATA 2.0, USB 2.0, an integrated security engine (SEC), and a hardware pattern-matching engine for QoS and packet classification. The 1.8 GHz core frequency, 1295-FCPBGA package, and -40 to +105C temperature grade differentiate this 'NXE7TMC' ordering part number from other speed and temperature grades within the P5021 family.
Typical applications include carrier-grade network routers and switches, line cards for telecom equipment, LTE small-cell base stations, aerospace flight-control and avionics compute modules, and industrial control processors. The combination of deterministic interrupt latency, hardware encryption, and high-speed serial interfaces makes the part especially attractive for control-plane and management-plane workloads in deterministic networking equipment.
When designing with this part, allocate at least four PCB layers for signal integrity on the DDR3 interface and provide adequate cooling for the FCPBGA at full core activity. Designers should also confirm that their firmware and Board Support Package (BSP) supports the specific 'NXE7TMC' speed/bin combination before committing to volume production.
Alternatives de remplacement direct pour P5021NXE7TMC — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
P5040NXN7TMC
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
P5021NXN7TMC
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
P5020NXN7TMC
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
P5010NXN7TMC
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
P5021NSE7TMC
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
P5021NXE7TMC Valeurs maximales et caractéristiques électriques
| Core Architecture | Power Architecture e5500 (64-bit) |
| Number of Cores | 2 |
| Maximum Core Frequency | 1.8 GHz |
| Memory Interface | DDR3 / DDR3L with ECC |
| Ethernet | 1/10 Gigabit Ethernet MACs |
| PCI Express | PCIe Gen2 controllers |
| SATA | SATA 2.0 |
| USB | USB 2.0 |
| Security Engine | SEC (Integrated) |
| Température de fonctionnement | -40C to +105C |
| Boîtier | 1295-FCPBGA (37.5 x 37.5 mm) |
| Type de montage | Surface Mount (BGA) |
| Family | QorIQ P5 (P5021 sub-family) |
| Silicon Revision | R2.1 |
Guide de configuration des broches du P5021NXE7TMC 1295-fcpbga (37.5 x 37.5 mm)
Configuration des broches du P5021NXE7TMC (boîtier 1295-fcpbga (37.5 x 37.5 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour P5021NXE7TMC.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
P5021NXE7TMC convient pour 6 applications: Carrier-Grade Router Line Cards, Telecom / Datacom Control Plane, Wireless Infrastructure (Small Cells / LTE), Aerospace and Defense Avionics, Industrial Control and Ruggedized Networking, Network Attached Storage (NAS) Controllers.
Carrier-Grade Router Line Cards
The P5021NXE7TMC's dual 1.8 GHz e5500 cores, integrated 10 Gigabit Ethernet MACs, and PCIe Gen2 controllers make it a strong fit for router line cards that terminate multiple 1G/10G uplinks while running control-plane software. Its deterministic interrupt latency and hardware security engine (SEC) accelerate IPsec/MACsec processing so the cores stay free for routing-table lookups and BGP/OSPF control. Designers typically pair the SoC with NXP DPAA drivers and external PHYs, and the 1295-FCPBGA package accommodates the wide parallel bus plus high-speed SerDes lanes needed for multi-port aggregation switches.
Recommandé
Telecom / Datacom Control Plane
In telecom control-plane chassis the P5021NXE7TMC provides two e5500 cores with hardware-accelerated encryption and a hardware pattern-matching engine for QoS classification. The ECC-protected DDR3 interface is essential for carrier-grade MTTR targets, and the integrated SEC block handles TLS, IKEv2, and MACsec key exchanges without loading the cores. The -40 to +105C temperature grade lets the same board be reused in outdoor DSLAM or 5G base-station cabinets, simplifying SKU management for telecom OEMs.
Recommandé
Wireless Infrastructure (Small Cells / LTE)
Small-cell and LTE base-station designs use the P5021NXE7TMC to run the L2/L3 protocol stack alongside encryption and radio-resource management. The dual 1.8 GHz cores deliver enough headroom for a complete eNodeB stack while the integrated SEC engine handles subscriber authentication and ciphering, offloading AES/SHA from the cores. The extended -40 to +105C range supports pole-mounted or rooftop small-cell enclosures, and the PCIe Gen2 links to a companion baseband modem or DSP without external glue logic.
Recommandé
Aerospace and Defense Avionics
Aerospace and defense platforms adopt the P5021NXE7TMC for flight-control, mission-computer, and signal-intelligence subsystems where deterministic performance and a long lifecycle matter. The QorIQ P5 family has a long aerospace pedigree, and the extended temperature grade supports unpressurized enclosures. The hardware security engine provides FIPS-grade cryptography for secure communications, while the ECC-protected DDR3 interface meets the reliability targets demanded by DO-178/DO-254 system integrators. Designers can re-use the same PCB across single-, dual-, and quad-core variants of the family.
Recommandé
Industrial Control and Ruggedized Networking
Ruggedized industrial routers and SCADA gateways leverage the P5021NXE7TMC's extended temperature range and integrated Ethernet/PCIe for substation automation, mining equipment, and railway signaling. The dual cores can separate real-time control traffic from management-plane HTTPS/TLS, and the SEC engine protects field-bus traffic with hardware-accelerated cryptography. The 1295-FCPBGA package, while large, supports the multiple SerDes lanes required for fan-out to industrial PHYs and to a separate crypto co-processor or FPGA.
Recommandé
Network Attached Storage (NAS) Controllers
NAS and unified-storage controllers benefit from the P5021NXE7TMC's dual e5500 cores, integrated SATA 2.0 ports, and hardware-accelerated crypto for encrypted volumes. The ECC-protected memory is essential for ZFS or RAID-Z parity workloads where silent memory errors would corrupt user data. The integrated 1/10 GbE MACs allow direct attach to top-of-rack switches without an external NIC, reducing bill-of-material cost for mid-range storage systems.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour P5021NXE7TMC — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | P5040NXN7TMC | P5021NXN7TMC | P5020NXN7TMC | P5010NXN7TMC | P5021NSE7TMC |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 1295-FCPBGA (37.5x37.5) | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA (37.5x37.5) - same |
| Number of Cores | 2 | 4 | 2 | 2 | 1 | 2 |
| Core Architecture | Power Architecture e5500 (64-bit) | Power Architecture e5500 (64-bit) - same | Power Architecture e5500 (64-bit) - same | Power Architecture e5500 (64-bit) - same | Power Architecture e5500 (64-bit) - same | Power Architecture e5500 (64-bit) - same |
| Memory Interface | DDR3 / DDR3L with ECC | DDR3 / DDR3L with ECC - same | DDR3 / DDR3L with ECC - same | DDR3 / DDR3L with ECC - same | DDR3 / DDR3L with ECC - same | DDR3 / DDR3L with ECC - same |
| Integrated Security Engine | Yes (SEC) | Yes (SEC) - same | Yes (SEC) - same | Yes (SEC) - same | Yes (SEC) - same | Yes (SEC) - same |
Principaux différenciateurs
- 1.8 GHz dual-core speed bin in the P5 family (vs P5010NXN7TMC)
- Pin-compatible quad-core upgrade path (vs P5040NXN7TMC)
- Integrated SEC hardware security engine (vs P5021NXN7TMC (same family, different bin))
Notes de conception
Estimated: with two e5500 cores active at 1.8 GHz and a typical 1.0 V core rail, the P5021NXE7TMC dissipates roughly 12-18 W depending on workload. The 1295-FCPBGA exposes its die through the top surface and should be paired with a high-performance thermal interface material and either a heatsink or a cold plate. Designs that target the +105C upper ambient must derate the SoC power to keep the junction below 125C - confirm thermal headroom using the theta_JB and theta_JC numbers in the NXP P5021 datasheet.
The 1295-FCPBGA requires at least an 8-layer PCB with a continuous ground plane beneath the package and matched-length routing for the two DDR3 channels. Follow NXP's P5021 hardware-design guide for via-in-pad geometry, SerDes lane lengths, and decoupling-cap placement; inadequate decoupling is the most common cause of marginal Ethernet or PCIe link training on first prototypes. Keep high-speed SerDes away from noisy power-converter nodes and use stitched ground vias around each BGA signal row.
Estimated: do not assume the boot ROM and reset configuration of the P5021NXE7TMC are identical to those of older QorIQ P2/P3 parts. Several RCW (reset configuration word) fields have changed between revisions, and silicon R2.1 has specific errata that must be worked around in the BSP. Always cross-check the latest NXP errata document for the exact 'NXE7TMC' speed bin before locking the firmware, and validate thermal performance with the actual workload rather than datasheet TDP alone.
Informations de conformité
RoHS and lead-free compliance per NXP product page. AEC-Q100 is not applicable (this is a communications processor, not an automotive analog IC). Extended -40 to +105C temperature grade supports industrial and aerospace programs; confirm specific screening level with NXP for defense applications.
